Tp Link Tl Sg3424 V2 Cli Reference Guide

2015-06-09

• Preface
• Chapter 1 Using the CLI
  • 1.1 Accessing the CLI
    • 1.1.1 Logon by a console port
    • 1.1.2 Configuring the Privileged EXEC Mode Password
    • 1.1.3 Logon by Telnet
    • 1.1.4 Logon by SSH
  • 1.2 CLI Command Modes
  • 1.3 Security Levels
  • 1.4 Conventions
    • 1.4.1 Format Conventions
    • 1.4.2 Special Characters
    • 1.4.3 Parameter Format
• Chapter 2 User Interface
  • enable
  • service password-encryption
  • enable password
  • enable secret
  • disable
  • configure
  • exit
  • end
  • history
  • history clear
• Chapter 3 IEEE 802.1Q VLAN Commands
  • vlan
  • interface vlan
  • name
  • switchport mode
  • switchport access vlan
  • switchport trunk allowed vlan
  • switchport general allowed vlan
  • switchport pvid
  • show vlan summary
  • show vlan brief
  • show vlan
• Chapter 4 MAC-based VLAN Commands
  • mac-vlan mac-address
  • show mac-vlan
• Chapter 5 Protocol-based VLAN Commands
  • protocol-vlan template
  • protocol-vlan vlan
  • protocol-vlan group
  • show protocol-vlan template
  • show protocol-vlan vlan
• Chapter 6 Voice VLAN Commands
  • voice vlan
  • voice vlan aging time
  • voice vlan priority
  • voice vlan mac-address
  • switchport voice vlan mode
  • switchport voice vlan security
  • show voice vlan
  • show voice vlan oui
  • show voice vlan switchport
• Chapter 7 GVRP Commands
  • gvrp(global)
  • gvrp(interface)
  • gvrp registration
  • gvrp timer
  • show gvrp global
  • show gvrp interface
• Chapter 8 Etherchannel Commands
  • channel-group
  • port-channel load-balance
  • lacp system-priority
  • lacp port-priority
  • show etherchannel
  • show etherchannel load-balance
  • show lacp
  • show lacp sys-id
• Chapter 9 User Manage Commands
  • user name (password)
  • user name (secret)
  • user access-control ip-based
  • user access-control mac-based
  • user access-control port-based
  • user max-number
  • user idle-timeout
  • line
  • password
  • login
  • login local
  • show user account-list
  • show user configuration
• Chapter 10 Binding Table Commands
  • ip source binding
  • ip source binding index
  • ip dhcp snooping
  • ip dhcp snooping global
  • ip dhcp snooping information option
  • ip dhcp snooping information strategy
  • ip dhcp snooping information remote-id
  • ip dhcp snooping information circuit-id
  • ip dhcp snooping trust
  • ip dhcp snooping mac-verify
  • ip dhcp snooping limit rate
  • ip dhcp snooping decline
  • show ip source binding
  • show ip dhcp snooping
  • show ip dhcp snooping information
  • show ip dhcp snooping interface gigabitEthernet
• Chapter 11 ARP Inspection Commands
  • ip arp inspection(global)
  • ip arp inspection trust
  • ip arp inspection(interface)
  • ip arp inspection limit-rate
  • ip arp inspection recover
  • show ip arp inspection
  • show ip arp inspection interface
  • show ip arp inspection statistics
  • clear ip arp inspection statistics
• Chapter 12 DoS Defend Command
  • ip dos-prevent
  • ip dos-prevent type
  • show ip dos-prevent
• Chapter 13 IEEE 802.1X Commands
  • dot1x system-auth-control
  • dot1x auth-method
  • dot1x guest-vlan(global)
  • dot1x quiet-period
  • dot1x timeout
  • dot1x max-reauth-req
  • dot1x
  • dot1x guest-vlan(interface)
  • dot1x port-control
  • dot1x port-method
  • radius
  • radius server-account
  • show dot1x global
  • show dot1x interface
  • show radius accounting
  • show radius authentication
• Chapter 14 System Log Commands
  • logging buffer
  • logging file flash
  • logging file flash frequency
  • logging file flash level
  • clear logging
  • logging host index
  • show logging local-config
  • show logging loghost
  • show logging buffer
  • show logging flash
• Chapter 15 SSH Commands
  • ip ssh server
  • ip ssh version
  • ip ssh timeout
  • ip ssh max-client
  • ip ssh download
  • show ip ssh
• Chapter 16 SSL Commands
  • ip http secure-server
  • ip http secure-server download certificate
  • ip http secure-server download key
  • show ip http secure-server
• Chapter 17 MAC Address Commands
  • mac address-table static
  • mac address-table aging-time
  • mac address-table filtering
  • mac address-table max-mac-count
  • show mac address-table
  • show mac address-table aging-time
  • show mac address-table max-mac-count interface gigabitEthernet
  • show mac address-table interface gigabitEthernet
  • show mac address-table count
  • show mac address-table address
  • show mac address-table vlan
• Chapter 18 System Configuration Commands
  • system-time manual
  • system-time ntp
  • system-time dst predefined
  • system-time dst date
  • system-time dst recurring
  • hostname
  • location
  • contact-info
  • ip management-vlan
  • ip address
  • ip address-alloc dhcp
  • ip address-alloc bootp
  • reset
  • reboot
  • copy running-config startup-config
  • copy startup-config tftp
  • copy tftp startup-config
  • firmware upgrade
  • ping
  • tracert
  • show system-time
  • show system-time dst
  • show system-time ntp
  • show system-info
  • show running-config
  • show cable-diagnostics interface
• Chapter 19 IPv6 Address Configuration Commands
  • ipv6 enable
  • ipv6 address autoconfig
  • ipv6 address link-local
  • ipv6 address dhcp
  • ipv6 address ra
  • ipv6 address eui-64
  • ipv6 address
  • show ipv6 interface vlan
• Chapter 20 Ethernet Configuration Commands
  • interface gigabitEthernet
  • interface range gigabitEthernet
  • description
  • shutdown
  • flow-control
  • media-type
  • duplex
  • speed
  • storm-control broadcast
  • storm-control multicast
  • storm-control unicast
  • bandwidth
  • clear counters
  • show interface status
  • show interface counters
  • show interface description
  • show interface flowcontrol
  • show interface configuration
  • show storm-control
  • show bandwidth
• Chapter 21 QoS Commands
  • qos
  • qos dscp
  • qos queue cos-map
  • qos queue dscp-map
  • qos queue mode
  • show qos interface
  • show qos cos-map
  • show qos dscp-map
  • show qos queue mode
  • show qos status
• Chapter 22 Port Mirror Commands
  • monitor session destination interface
  • monitor session source interface
  • show monitor session
• Chapter 23 Port Isolation Commands
  • port isolation
  • show port isolation interface
• Chapter 24 Loopback Detection Commands
  • loopback-detection(global)
  • loopback-detection interval
  • loopback-detection recovery-time
  • loopback-detection(interface)
  • loopback-detection config
  • loopback-detection recover
  • show loopback-detection global
  • show loopback-detection interface
• Chapter 25 PoE Commands
  • power inline consumption (global)
  • power inline disconnect-method
  • power profile
  • power time-range
  • power holiday
  • absolute
  • periodic
  • holiday
  • power inline consumption(interface)
  • power inline priority
  • power inline supply
  • power inline profile
  • power inline time-range
  • show power inline
  • show power inline configuration interface
  • show power inline information interface
  • show power profile
  • show power holiday
  • show power time-range
• Chapter 26 ACL Commands
  • time-range
  • absolute
  • periodic
  • holiday
  • holiday(global)
  • access-list create
  • mac access-list
  • access-list standard
  • access-list extended
  • rule
  • access-list policy name
  • access-list policy action
  • redirect interface
  • redirect vlan
  • s-condition
  • s-mirror
  • qos-remark
  • access-list bind(interface)
  • access-list bind(vlan)
  • show time-range
  • show holiday
  • show access-list
  • show access-list policy
  • show access-list bind
• Chapter 27 MSTP Commands
  • spanning-tree(global)
  • spanning-tree(interface)
  • spanning-tree common-config
  • spanning-tree mode
  • spanning-tree mst configuration
  • instance
  • name
  • revision
  • spanning-tree mst instance
  • spanning-tree mst
  • spanning-tree priority
  • spanning-tree tc-defend
  • spanning-tree timer
  • spanning-tree hold-count
  • spanning-tree max-hops
  • spanning-tree bpdufilter
  • spanning-tree bpduguard
  • spanning-tree guard loop
  • spanning-tree guard root
  • spanning-tree guard tc
  • spanning-tree mcheck
  • show spanning-tree active
  • show spanning-tree bridge
  • show spanning-tree interface
  • show spanning-tree interface-security
  • show spanning-tree mst
• Chapter 28 IGMP Snooping Commands
  • ip igmp snooping(global)
  • ip igmp snooping(interface)
  • ip igmp snooping immediate-leave
  • ip igmp snooping drop-unknown
  • ip igmp snooping vlan-config
  • ip igmp snooping multi-vlan-config
  • ip igmp snooping filter add-id
  • ip igmp snooping filter(global)
  • ip igmp snooping filter(interface)
  • ip igmp snooping filter maxgroup
  • ip igmp snooping filter mode
  • show ip igmp snooping
  • show ip igmp snooping interface
  • show ip igmp snooping vlan
  • show ip igmp snooping multi-vlan
  • show ip igmp snooping groups
  • show ip igmp snooping filter
• Chapter 29 MLD Snooping Commands
  • ipv6 mld snooping
  • ipv6 mld snooping router-aging-time
  • ipv6 mld snooping member-aging-time
  • ipv6 mld snooping report-suppression
  • ipv6 mld snooping unknown-filter
  • ipv6 mld snooping last-listener query-inteval
  • ipv6 mld snooping last-listener query-count
  • ipv6 mld snooping multicast-vlan
  • ipv6 mld snooping multicast-vlan vlan-id
  • ipv6 mld snooping vlan
  • ipv6 mld snooping vlan router-aging-time
  • ipv6 mld snooping vlan member-aging-time
  • ipv6 mld snooping vlan immediate-leave
  • ipv6 mld snooping vlan mrouter
  • ipv6 mld snooping vlan static
  • ipv6 mld snooping querier vlan
  • ipv6 mld snooping querier vlan max-response-time
  • ipv6 mld snooping querier vlan query-interval
  • ipv6 mld snooping querier vlan query-source
  • ipv6 mld snooping filter(global)
  • ipv6 mld snooping filter(interface)
  • ipv6 mld snooping filter-mode
  • ipv6 mld snooping filter-id
  • ipv6 mld snooping max-group
  • clear ipv6 mld snooping statistics
  • show ipv6 mld snooping
  • show ipv6 mld snooping vlan
  • show ipv6 mld snooping static-mcast
  • show ipv6 mld snooping group
  • show ipv6 mld snooping filter
  • show ipv6 mld snooping interface
  • show ipv6 mld snooping interface filter
  • show ipv6 mld snooping querier
  • show ipv6 mld snooping statistics
• Chapter 30 SNMP Commands
  • snmp-server
  • snmp-server view
  • snmp-server group
  • snmp-server user
  • snmp-server community
  • snmp-server host
  • snmp-server engineID
  • snmp-server traps snmp
  • snmp-server traps link-status
  • snmp-server traps
  • snmp-server traps mac
  • snmp-server traps vlan
  • rmon history
  • rmon event
  • rmon alarm
  • show snmp-server
  • show snmp-server view
  • show snmp-server group
  • show snmp-server user
  • show snmp-server community
  • show snmp-server host
  • show snmp-server engineID
  • show rmon history
  • show rmon event
  • show rmon alarm
• Chapter 31 LLDP Commands
  • lldp
  • lldp hold-multiplier
  • lldp timer
  • lldp med-fast-count
  • lldp receive
  • lldp transmit
  • lldp snmp-trap
  • lldp tlv-select
  • lldp med-location
  • lldp med-status
  • lldp med-tlv-select
  • show lldp
  • show lldp interface
  • show lldp local-information interface
  • show lldp neighbor-information interface
  • show lldp traffic interface
• Chapter 32 Cluster Commands
  • cluster ndp
  • cluster ntdp
  • cluster explore
  • cluster
  • cluster candidate
  • cluster individual
  • show cluster ndp
  • show cluster ntdp
  • show cluster neighbour
  • show cluster manage role