Tp Link Tl Sl3428 V3 User Guide

2015-06-09

• Package Contents
• Chapter 1 About this Guide
  • 1.1 Intended Readers
  • 1.2 Conventions
  • 1.3 Overview of This Guide
• Chapter 2 Introduction
  • 2.1 Overview of the Switch
  • 2.2 Main Features
  • 2.3 Appearance Description
    • 2.3.1 Front Panel
    • 2.3.2 Rear Panel
• Chapter 3 Login to the Switch
  • 3.1 Login
  • 3.2 Configuration
• Chapter 4 System
  • 4.1 System Info
    • 4.1.1 System Summary
    • 4.1.2 Device Description
    • 4.1.3 System Time
    • 4.1.4 Daylight Saving Time
    • 4.1.5 System IP
  • 4.2 User Management
    • 4.2.1 User Table
    • 4.2.2 User Config
  • 4.3 System Tools
    • 4.3.1 Config Restore
    • 4.3.2 Config Backup
    • 4.3.3 Firmware Upgrade
    • 4.3.4 System Reboot
    • 4.3.5 System Reset
  • 4.4 Access Security
    • 4.4.1 Access Control
    • 4.4.2 SSL Config
    • 4.4.3 SSH Config
• Chapter 5 Switching
  • 5.1 Port
    • 5.1.1 Port Config
    • 5.1.2 Port Mirror
    • 5.1.3 Port Security
    • 5.1.4 Port Isolation
    • 5.1.5 Loopback Detection
  • 5.2 LAG
    • 5.2.1 LAG Table
    • 5.2.2 Static LAG
    • 5.2.3 LACP Config
  • 5.3 Traffic Monitor
    • 5.3.1 Traffic Summary
    • 5.3.2 Traffic Statistics
  • 5.4 MAC Address
    • 5.4.1 Address Table
    • 5.4.2 Static Address
    • 5.4.3 Dynamic Address
    • 5.4.4 Filtering Address
• Chapter 6 VLAN
  • 6.1 802.1Q VLAN
    • 6.1.1 VLAN Config
    • 6.1.2 Port Config
  • 6.2 Protocol VLAN
    • 6.2.1 Protocol VLAN
    • 6.2.2 Protocol Template
    • 6.2.3 Port Enable
  • 6.3 GVRP
  • 6.4 Application Example for 802.1Q VLAN
  • 6.5 Application Example for Protocol VLAN
• Chapter 7 Spanning Tree
  • 7.1 STP Config
    • 7.1.1 STP Config
    • 7.1.2 STP Summary
  • 7.2 Port Config
  • 7.3 MSTP Instance
    • 7.3.1 Region Config
    • 7.3.2 Instance Config
    • 7.3.3 Instance Port Config
  • 7.4 STP Security
    • 7.4.1 Port Protect
    • 7.4.2 TC Protect
  • 7.5 Application Example for STP Function
• Chapter 8 Multicast
  • 8.1 IGMP Snooping
    • 8.1.1 Snooping Config
    • 8.1.2 Port Config
    • 8.1.3 VLAN Config
    • 8.1.4 Multicast VLAN
  • 8.2 Multicast IP
    • 8.2.1 Multicast IP Table
    • 8.2.2 Static Multicast IP
  • 8.3 Multicast Filter
    • 8.3.1 IP-Range
    • 8.3.2 Port Filter
  • 8.4 Packet Statistics
• Chapter 9 QoS
  • 9.1 DiffServ
    • 9.1.1 Port Priority
    • 9.1.2 DSCP Priority
    • 9.1.3 802.1P/CoS Mapping
    • 9.1.4 Schedule Mode
  • 9.2 Bandwidth Control
    • 9.2.1 Rate Limit
    • 9.2.2 Storm Control
  • 9.3 Voice VLAN
    • 9.3.1 Global Config
    • 9.3.2 Port Config
    • 9.3.3 OUI Config
• Chapter 10 ACL
  • 10.1 Time-Range
    • 10.1.1 Time-Range Summary
    • 10.1.2 Time-Range Create
    • 10.1.3 Holiday Config
  • 10.2 ACL Config
    • 10.2.1 ACL Summary
    • 10.2.2 ACL Create
    • 10.2.3 MAC ACL
    • 10.2.4 Standard-IP ACL
    • 10.2.5 Extend-IP ACL
  • 10.3 Policy Config
    • 10.3.1 Policy Summary
    • 10.3.2 Policy Create
    • 10.3.3 Action Create
  • 10.4 Policy Binding
    • 10.4.1 Binding Table
    • 10.4.2 Port Binding
    • 10.4.3 VLAN Binding
  • 10.5 Application Example for ACL
• Chapter 11 Network Security
  • 11.1 IP-MAC Binding
    • 11.1.1 Binding Table
    • 11.1.2 Manual Binding
    • 11.1.3 ARP Scanning
    • 11.1.4 DHCP Snooping
  • 11.2 ARP Inspection
    • 11.2.1 ARP Detect
    • 11.2.2 ARP Defend
    • 11.2.3 ARP Statistics
  • 11.3 DoS Defend
  • 11.4 802.1X
    • 11.4.1 Global Config
    • 11.4.2 Port Config
    • 11.4.3 Radius Server
• Chapter 12 SNMP
  • 12.1 SNMP Config
    • 12.1.1 Global Config
    • 12.1.2 SNMP View
    • 12.1.3 SNMP Group
    • 12.1.4 SNMP User
    • 12.1.5 SNMP Community
  • 12.2 Notification
  • 12.3 RMON
    • 12.3.1 History Control
    • 12.3.2 Event Config
    • 12.3.3 Alarm Config
• Chapter 13 LLDP
  • 13.1 Basic Config
    • 13.1.1 Global Config
    • 13.1.2 Port Config
  • 13.2 Device Info
    • 13.2.1 Local Info
    • 13.2.2 Neighbor Info
  • 13.3 Device Statistics
• Chapter 14 Cluster
  • 14.1 NDP
    • 14.1.1 Neighbor Info
    • 14.1.2 NDP Summary
    • 14.1.3 NDP Config
  • 14.2 NTDP
    • 14.2.1 Device Table
    • 14.2.2 NTDP Summary
    • 14.2.3 NTDP Config
  • 14.3 Cluster
    • 14.3.1 Cluster Summary
    • 14.3.2 Cluster Config
  • 14.4 Application Example for Cluster Function
• Chapter 15 Maintenance
  • 15.1 System Monitor
    • 15.1.1 CPU Monitor
    • 15.1.2 Memory Monitor
  • 15.2 Log
    • 15.2.1 Log Table
    • 15.2.2 Local Log
    • 15.2.3 Remote Log
    • 15.2.4 Backup Log
  • 15.3 Device Diagnostics
    • 15.3.1 Cable Test
    • 15.3.2 Loopback
  • 15.4 Network Diagnostics
    • 15.4.1 Ping
    • 15.4.2 Tracert
• Chapter 16 System Maintenance via FTP
• Appendix A: Specifications
• Appendix B: Configuring the PCs
• Appendix C: 802.1X Client Software
• Appendix D: Glossary