Trail Ridge Technologies TRORQV1100MON Wireless Backup Camera Receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1632596
Application ID	2TvvnM6Fd/za9tYUoC3Wmw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.46kB (230780 bits)
Date Submitted	2012-02-07 00:00:00
Date Available	2012-02-07 00:00:00
Creation Date	2012-01-16 11:13:11
Producing Software	Microsoft® Word 2010
Document Lastmod	2012-01-16 11:13:11
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	mitchhanks

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radi-ate radio frequency energy and, if not in-stalled and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/ TV technician for help.
© Trail Ridge Technologies, LLC
Open Road QuickVu Wireless Backup Camera
Congratulations on the purchase of your new Open Road QuickVu Wireless Backup Camera!
We hope you find this product to enhance the visibility and safety of your driving experience.
The QuickVu Wireless Backup Camera from Open Road is designed for those of us who want
the convenience and enhanced visibility of a backup camera, but don’t want to cut holes in the
bumper or splice into our car’s electrical system. It’s for those of us who are buying a new car
and would rather not pay thousands of dollars for a car backup camera that could be installed
after purchase for a fraction of that cost.
Installation
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The QuickVu Wireless Backup Camera provides all of the video quality and usefulness of wired
backup camera but without the headache of installation. To install the camera, first remove the
bolts from the rear license plate. Place the camera over the license plate with the holes of the
camera and license plate aligned with the car’s license plate mounting holes. Insert the bolts
through the camera and license plate and engage with the car’s mounting holes and turn the
bolts clockwise until tight. Hand tighten with nominal torque but do not over tighten. That’s
it! The camera is installed.
Install the Control module by finding a location on the dashboard of your vehicle where the
module will not interfere visually with your driving and where the power cord that plugs into
the back of the module can easily reach your car’s accessory receptacle (cigarette lighter).
Attach the module to the dashboard using supplied double sided sticky tape.
If you purchased a monitor with the camera system, connect the monitor to the camera
according to the diagram shown in Figure 1. Determine a location for the monitor near the
Control module and attach the monitor to the dashboard of your vehicle using double sided
sticky tape.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : en-US
Tagged PDF                      : Yes
Author                          : mitchhanks
Creator                         : Microsoft® Word 2010
Create Date                     : 2012:01:16 11:13:11-05:00
Modify Date                     : 2012:01:16 11:13:11-05:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools