TranSystem 981200101 760 GPS RECORDER User Manual 760 Manual R01

TranSystem 760 GPS RECORDER 760 Manual R01

Users Manual

760 GPS Recorder V0.1 User’s Manual Published 18-March-2010 *Specifications subject to change without prior notice. © 2010 TRANSYSTEM INC. all rights reserved.
760 GPS Recorder V0.1 2Table of Contents 1. Before you begin................................................................................................................ 3 1.1 Note and Warning................................................................................................... 3 1.2 Introduction............................................................................................................ 4 1.3 Features .................................................................................................................. 4 1.4 Applications ........................................................................................................... 4 1.5 Package content...................................................................................................... 5 2 Getting Started.................................................................................................................... 6 2.1 Appearance............................................................................................................. 6 2.2 Buttons ................................................................................................................... 7 2.3 LED Display........................................................................................................... 8 2.4 POI confirmation.................................................................................................... 9 2.5 Getting Started........................................................................................................ 9 2.6 Helpful Tips.......................................................................................................... 11 3 Configure your GPS Recorder ......................................................................................... 12 3.1 Driver Installation ................................................................................................ 12 3.2 GpsView software................................................................................................ 12 3.2.1 Connect USB cable between GPS and laptop.......................................... 12 3.2.2 Execute GpsView Program ...................................................................... 13 3.2.3 Download AGPS...................................................................................... 13 Appendix A. Specifications...................................................................................................... 16 Appendix B. Certification ........................................................................................................ 19 Appendix C. Warranty Information.......................................................................................... 20
760 GPS Recorder V0.1 31. Before you begin 1.1 Note and Warning z If 760 is used in temperature lower than -10°C or higher than 60°C, its Lithium-Ion battery charging capability will decrease. Please leave your 760 far from heat or high temperature environment. In addition, do not expose your 760 in temperature higher than 140°F/60°C. The battery inside 760 may overheated and explode or burn itself, and this will lead to very serious damage. The Lithium-Ion battery inside the 760 should be recycled. z It is recommended to turn off 760 while in the hospital. Wireless GPS may interfere with medical equipments which use radio frequency. z Remove the battery from 760 and store it in dry/cool places if you are not using 760 for a long period of time. z Keep the 760 and all accessories out of children’s reach. z The manufacturer assumes no responsibility for any damages and loss resulting from the use of this manual, or from deletion of data as a result of malfunction, dead battery, or from misuse of the product in any way. z Use only the supplied and approved accessories. Unauthorized accessories, modifications or attachments could damage your 760, and may violate regulations governing radio devices. z Use a dry, clean soft cloth to clean the unit. Do not use harsh cleaning solvents, chemicals, or strong detergents. z Do not attempt to open the 760 yourself. Unauthorized hacking may damage the unit, and void your warranty.
760 GPS Recorder V0.1 41.2 Introduction GPS 760 features commercial grade GPS receiver to help manage your field team effectively. Its water-proof, durable all-in-one design includes audible feedback and motion sensor to give maximum battery life. GPS 760 allows you to log your route by setting the interval of time/ distance/ speed. Easy to use and durable button allow field personal to record point of interest by push of a button. Through user friendly utility, it can display your track on Google Earth. 1.3 Features z Durable push button for POI recording z Smart log of time, distance and speed z Log up to 250,000 waypoints z High receiving sensitivity with AGPS capability z IPX3 water-proof z Embedded sensor for smart operation z Smart auto on/off z Vibrator / Buzzer (optional) for POI confirmation z Rechargeable battery z Optional BT connection capability 1.4 Applications z Record your travels z Manage trip expense z Manage field team z Point of interest recording
760 GPS Recorder V0.1 5 1.5 Package content Congratulations on your purchase of GPS 760 with Lithium-Ion chargeable battery. Before you start using 760, please make sure your package includes following items. If any item is damaged or missing, please contact your local dealer at once. 1. 760 GPS Recorder ( include Li-Ion battery ) x 1 2. USB cable x 1 3. Power adapter x 1 4. CD Tool x 1 (user manual, software utility, driver) 5. Quick start guide x 1 * Unit package contents may vary depending on countries without prior notice. * The power adapter can only be used to charge 760. Please don’t make use of it with devices other than 760.
760 GPS Recorder V0.1 6 2 Getting Started 2.1 Appearance 1. Power bottom 2. Push to log (POI) bottom 3. USB connector (with cover) 4. Battery status LED (Red/Green) 5. GPS status LED (Orange) 6. Internal GPS antenna 7. Memory capacity LED (Red) 8. Mode LED (Blue) 9. BT LED (Blue) - Optional 3 1 2 4 & 5 6 7 8 9
760 GPS Recorder V0.1 7 2.2 Buttons Name Description Power Press and hold 2 seconds to turn On and Off your device POI Push button to record Point of Interest (POI), Memory status LED will blink 3 times to confirm button pressed Power + POI Press both buttons at the same time will display battery level
760 GPS Recorder V0.1 82.3 LED Display The 760 GPS Recorder has following LED displays for status update. Symbol Function / Color Status Description Blinking Low battery level On During power charging via USB port Battery Status /Red Off Charging is completed Green On / Off Power gauge when both POI and Power buttons are pressed at the same time On Acquiring satellites, GPS position not fixed GPS Status /Orange Blinking GPS position is fixed Blinking The device is logging position Blink 3 times POI button is pressed Memory capacity /Red On The memory is >80% full On Mode 1 Slow blinking Mode 2 Mode /Blue Fast blinking Mode 3 Off Bluetooth disconnected Bluetooth Status /Blue (Optional) Blinking Bluetooth is connected for data transmission
760 GPS Recorder V0.1 9 2.4 POI confirmation GPS 760 uses following methods to confirm press of POI button:  Vibrator (default)  Memory capacity LED blinks 3 times (default)  Sound buzzer alarm (Optional) 2.5 Getting Started Please follow the procedure step by step. Step 1 Charging Your Battery Connect your USB cable between 760 and the power source. Charging time is about 3~4 hours and you can charge from PC/ Notebook’s USB HOST or from cigarette-lighter in car or home adapter. For the 1st time you use the 760, please charge battery until it is full. Red Power LED will be On during charging cycle and turns Off once the charging is completed. Step 2 Turn on your GPS 760 and get position fix Turn on your GPS 760 by press-and-hold the power button for 2 seconds. Power LED will turn on after power on sequence is completed. The orange GPS status LED will stays on before 760 get GPS position fix. Make sure your GPS 760 has clear sky view at this stage of acquiring satellite signal. Depending on your surroundings, it normally takes around 40 seconds to 1.5 minutes before GPS status starts to blink which means 760 has acquired necessary satellite signals and get position fix.. Step 3 Log your position GPS 760 will start logging your position once it locks to satellites signal. It will log and mark
760 GPS Recorder V0.1 10position upon press of POI button. A vibrator is used as means of confirmation. Optional buzzer can also be used for confirmation purpose. This is only valid for specific setting when ex-factory. Step 4 Download logged data Download your logged data via USB port to your PC. You can use utility AP included in the CD-ROM for data downloading. Further management and analysis of the data can be done via application specific application program. GPS 760 outputs in popular .csv or .bin format for easy interface to application program.
760 GPS Recorder V0.1 112.6 Helpful Tips z Some vehicles using heavy metallic sun protecting coating on windshields may affect GPS signal reception. z Streets with high rising buildings may affect GPS signal reception. z Tunnel and indoor parking garage may affect signal reception. z In general, GPS signal reception best in open space where it can see clear sky. Weather condition will also affect GPS reception – rain & snow contribute to worse sensitivity. z Low battery status may affect signal reception. z This device outputs coordinates data every second, therefore the actual position and the position shown on your map may have slight time delay. This may happen when you drive at higher speed or make a turn around a corner. z For the device not in use over several days, allow it 1~3 minutes to obtain satellite constellation information and fix your position, this is called “Cold Start”. Upon battery replacement, GPS device will do Cold Start again. z If your device can not fix position for more than 20 minutes, please change to another location with open space and then try again. z When using AGPS function, it is recommend to use GPSView to download the AGPS data to your device via USB port. AGPS data will valid for 6 days for each download.
760 GPS Recorder V0.1 123 Configure your GPS Recorder GpsView program only supports Microsoft Windows based platform. 3.1 Driver Installation Before the USB connector plugs into your PC/ Laptop, please have your USB Driver installation ready. (Install InstallDriver.exe driver for USB port from CD-ROM.) 3.2 GpsView software Open the GpsView software, please select correct COM port and Baud Rate 115,200bps to configure GPS. 3.2.1 Connect USB cable between GPS and laptop
760 GPS Recorder V0.1 133.2.2 Execute GpsView Program Click “Command” tap. Update Rate 1 ~ 5Hz is user configurable. And still more options for choice of NMEA output, DGPS…etc. all available through pull-down menus. 3.2.3 Download AGPS 1. Start→Control Panel→System→Hardware→Device Management→Connector（COM and LPT）Check Com port position。
760 GPS Recorder V0.1 142. Open GpsView.exe→Check Baud Rate and Com port→click On 3. Choose Setup
760 GPS Recorder V0.1 154. Choose Update 5. When Updating now…100%, click Enter complete。 NOTE: When you use AGPS function, we suggest use GpsView to download the AGPS data via USB cable. AGPS data valid for 6 days after each download
760 GPS Recorder V0.1 16Appendix A. Specifications General Frequency L1,1575.42MHZ C/A Code 1.023MHZ Datum WGS84 Performance Characteristics Accuracy* <3m CEP, without aid 2.5m DGPS (WAAS, EGNOS, MSAS) Reacquisition Time* <1s TTFF* 35 / 34 / 1.5s for Cold / Warm / Hot start respectively AGPS* <15s Sensitivity* Acquisition:-148dBm max / Tracking:-165dBm max Dynamic Altitude 18,000m max. Velocity 515m/s max. Acceleration 4g max. Interface Baud Rate 115200 bps (default) Protocols NMEA 0183 v3.01 Support WAAS / EGNOS GGA,GSA,GSV,RMC(default); GLL,VTG(optional) USB Bridge
760 GPS Recorder V0.1 17Standard Fully compliant with USB2.0 Speed 12Mbps Connector Type A female Data Log Memory 32Mbit or 64Mbit (optional) Way points 125,000 (default) or more Log data Date, Time, Latitude, Longitude, Velocity, Height Log GPS data by time interval/ distance/ speed limit Update Rate 1Hz or 5Hz (optional), user configurable via utility AP Power Input Voltage Via USB type A connector, 5.0V±5% Battery Re-chargeable Lithium-Ion battery Operation time 25 hrs Environment Operating Temperature -20°C to +60°C Storage Temperature -20°C to +85°C Charging -0°C to +45°C Relative Humidity 20% ~ 80% R.H. non-condensing Waterproof IPX3 Physical Dimension 52 x 82 x 19 mm Bluetooth ( Optional ) Standard Fully compliant with Bluetooth V1.2
760 GPS Recorder V0.1 18Output Power 0dBm (Typical), ClassII Range Over 10 meters Bluetooth Profile Serial Port Profile(SPP) Frequency 2.4G ~ 2.4835GHz ISM Band Security Yes * Citation original chipset specifications
760 GPS Recorder V0.1 19Appendix B. Certification FCC Notices This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure requirements: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHOURIZED MODIFICATION TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. CE Notices Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed. The test was performed according to the following European standards:  EN 300 328-2 V.1.2.1 (2001-08)  EN 301 489-1 V.1.4.1 (2002-04) / EN 301 489-17 V.1.2.1 (2002-04)
760 GPS Recorder V0.1 20 EN 50371: 2002  EN 60950: 2000 Appendix C. Warranty Information Thank you for your purchase of GPS product from the company. The company warrants this product to be free from defects in materials and workmanship for one year from the date of purchase. The warranty for accessories is six months. The stamp of distributor or a copy of the original sales receipt is required as the proof of purchase for warranty repairs. The company will, as its sole option, repair or replace any components, which fail in normal use. Such repair or replacement will be made at no charge to the customer for parts or labor. The customer is, however, responsible for any transportation costs. This warranty does not cover failures due to abuse, misuse, accident or unauthorized alteration of repairs. The company assumes no responsibility about products which have been improperly used, abused, damaged due to accident or natural disaster, or damaged due to unauthorized uninstallation, repair or modification.

Navigation menu