Trane Mua Svp01A En Users Manual

2015-01-21

• NETWORKING
• ADAPTAIRE DEFAULT SETTINGS
• Unit Operating Modes
  • MDT Controls:
  • MRT Controls:
  • MRT-Pro Controls:
  • MRT-Expert Controls:
  • Heating/Ventilating/Cooling Operating Modes
    • Heating Mode
    • Ventilation Mode
    • Cooling Mode
  • Damper Control Modes
    • Manual Mode
• Functions
  • 100% Outside Air
  • Minimum Ventilation
  • Freezestat
  • Clogged Filter
  • User Configured PID Control
    • DIRECT ACTING
    • REVERSE ACTING
    • Unit Resets
    • Multiplexed Inputs
    • Clock Set
• Diagnostics
  • Critical Fault Codes
    • FAULT CODE: Low Discharge Temperature
    • FAULT CODE: Safety Circuit Open
    • FAULT CODE: Burner Status
    • FAULT CODE: Burner Hand
    • FAULT CODE: Flame Failure
  • Diagnostics - Non-Critical Fault Codes
    • FAULT CODE: Unit off/Fan on
    • FAULT CODE: Unit on/Fan off
    • FAULT CODE: Check Airflow Switches
    • FAULT CODE: Clogged Filter Switch
    • FAULT CODE: Energy Save Mode 1
    • FAULT CODE: Energy Save Mode 2
    • FAULT CODE: Energy Save Mode 3
    • FAULT CODE: Insufficient OA
• Menu Selection
  • Menu Selection Tree for BACview
    • UNIT MODES HOTKEY - 2
    • SET POINTS HOTKEY - 3
    • STATUS MENU HOTKEY - 4
    • ALARM HOTKEY - 1
    • RESETS HOTKEY - 6
    • SCHEDULES HOTKEY- 7
    • USER CONFIGURABLE OUTPUT HOTKEY - 8
    • CLOCKSET HOTKEY - 0
    • HELP HOTKEY - 5
    • FUEL SELECT HOTKEY - 9
• Thermostat Output Curve
  • 10 K Ohms Thermistor Output Curve
• Airflow Station Layout
• I/O Zone 583 Controller Specifications
• Typical Wiring Schematic