Trane Twa075A Users Manual SSPPRC002EN_BK1.p65
TWE200B to the manual 72ca658f-f771-421f-8858-ee3ca38dc480
2015-01-21
: Trane Trane-Twa075A-Users-Manual-236233 trane-twa075a-users-manual-236233 trane pdf
Open the PDF directly: View PDF .
Page Count: 56
Download | |
Open PDF In Browser | View PDF |
Split System Heat Pumps Split System Heat Pumps TWA075A-TWA200B Air Handlers TWE050A-TWE200B 50 Hz January 2004 SSP-PRC002-EN Introduction Split System Heat Pump Units . . . Designed With Your Needs In Mind. The Trane reputation for quality and reliability in air conditioning continues with the Odyssey™ family of light commercial split systems. Trane paid attention to your needs to make sure you get a system that will meet your job requirements every time...and at a competitive price. Designing the Details Filters The TWE050A, 075A, 100A and 100B air handlers are supplied with 1" (25.4 mm) throwaway filters as standard.The filter racks were designed to easily convert for installation of 2" (50.8 mm) filters. The TWE155B and 200B air handlers have 2" (50.8 mm) filters as standard. CoupleTrane’s reputation for quality and reliability in split system air conditioners with efficiency, flexibility and installation ease...and you have systems that will give you “SimplyThe Best Value.’’ Careful attention was given to designing the details — from control wiring to the access panels. Odyssey units feature time-saving colored and numbered wiring and removable panels which allow complete access to all major components and controls. All outdoor units feature external high and low pressure switches for easy diagnosing and servicing of the unit. Service valves with gauge ports are provided on all units. Manufacturing Control Standardized Cabinets Trane’s exclusive control over the design and manufacturing of all major components is unique in the industry. This approach assures us total control over both the quality and reliability of these components. And allows us to custom match components to deliver the best in split system performance. In addition, all cabinets have been standardized. When you are servicing an outdoor unit or an air handler, all components are in the same location from unit to unit. ©American Standard Inc. 2001 UL Listed and ARI Certified Trane meets or exceeds all nationally recognized agency safety and design standards. Each condensing unit is UL designed, approved and labeled in accordance to UL Standards: UL 1995 for central cooling air conditioners, refrigeration and air conditioning condensing and compressor units. Each air handler is designed, approved and labeled in accordance to UL 465 and UL 1995 standard for heat pumps. Each unit is certified in accordance with ARI Standard 210/240 or 340/360. SSP-PRC002-EN Contents Introduction Features and Benefits 2 Application Considerations 6 Selection Procedure 7 4 Model Number Description 8 9 General Data Performance Data 12 Cool and Heat Performance Fan Performance SSP-PRC002-EN Electric Power 12 24 31 Connection and Wiring 33 Dimension and Weights 39 Mechanical Specifications 52 3 Features and Benefits Condensing Units Options TheTWA075A and 100A single compressor models feature single refrigeration circuitry, lowering job installation costs by requiring only one set of refrigerant lines.These units are ideal for the low cost, new construction jobs as well as renovation and replacement buildings. In addition, Odyssey includesTWA155B and 200B dual compressor units to give true stand-by protection; if one compressor fails, the second will automatically start-up. Also, the first compressor can be serviced without shutting down the unit since the refrigerant circuits are independent. Dual compressors are not just for protection, they also save energy costs. Most buildings are designed for the peak load requirements yet the building usually operates at less than peak load. During light load conditions, only one compressor functions to maintain the space comfort thus reducing the need for energy. 4 Trane split systems have been specified in thousands of applications and you’ll find Odyssey will win you even more jobs with its small manageable cabinet. This light, compact design will save time and money for rigging and installation. And the compactness will permitTrane’s unit to replace almost any unit — effortlessly. Low Ambient Cooling Operation Each heat pump unit can operate to 50°F (10°C) as standard in the cooling mode. An accessory Head Pressure Control gives you the capability to operate to 0°F (-18°C). All heat pumps offer these accessories: • • • • • Head Pressure Control Coil Guard Kits Isolators both Rubber-in-Shear and SpringType Anti-Short-Cycle Kit Time Delay Relay Air Handlers Offer More Flexibility Flexibility is a key to meeting changing market requirements. Odyssey split sytems offer not only heat pumps but also convertible air handlers.The air handlers can be installed either vertically in a mechanical room or horizontally above a ceiling. And it doesn’t require any removal of panels to make either airflow application work.These air handlers have a double sloped condensate drain pan that allows for either airflow configuration. And the drain pan can easily be removed for cleaning. All the air handlers feature factory installed belt drive and ball bearing evaporator fans with adjustable sheaves for maximum airflow performance. In fact, the standard motor on theTWA100A air handler will deliver 3325 cfm (5649 m3/hr) at 1.4" (349 Pa) ESP. Plus oversized motors are available for higher static applications. SSP-PRC002-EN Features and Benefits Odyssey air handler versatility is further increased by a complete line of accessories designed to match and install smoothly: • • • • • • • • Discharge Plenum and Grille Return Grille Subbase Electric Heaters High Static Evaporator Motor Isolators both Rubber-in-Shear and SpringType A Full Line ofThermostats OutdoorThermostat Odyssey Lowers Installation Costs Your installation costs are reduced with Odyssey. Both outdoor units and air handlers are factory packaged and assembled so jobsite installation is quick and easy.You get a complete unit with all the components, controls and the internal wiring factory ready for a smooth jobsite start-up. Unlike some competitive models the following components are factoryinstalled inTrane air handlers: • • • Single Point Power Entry • • • • • Low VoltageTerminal Board • Expansion Valve and Check Valves Blower wheel and housing Evaporator motor with sheaves andpulleys Transformer Contactor Fan relay DX Coil with complete refrigeration circuitry There’s no need to install components and put together the air handler on the job.This provides you with less labor cost and fewer chances for installation errors which cause callbacks. All this means saving you money both in replacement and new construction applications. Odyssey — A Complete Split System Odyssey delivers the flexibility to select a complete system that meets your particular job requirements. Air handlers are designed, tested, and rated with outdoor units to let you select the proper match between capacity and load. Heat pumps can also be matched withTrane built-up air handlers. Also, these matched systems can be quickly engineered for specific applications usingTrane’s computerized selection and load programs. SSP-PRC002-EN 5 Application Considerations Application of this product should be within the catalogued airflow and performance considerations. Clearance Requirements The recommended clearances identified with unit dimensions should be maintained to assure adequate serviceability, maximum capacity and peak operating efficiency. Actual clearances which appear inadequate should be reviewed with the localTrane Representative. Low Ambient Cooling As manufactured, these units can operate to 50°F (10°C) in the cooling mode of operation. An accessory head pressure control will allow operation to 0° F (-17.8°C) outdoor ambient. When using these units with control systems such as bypass changeover Variable Air Volume, make sure you consider the requirement for a head pressure control to allow low ambient cooling. 180° Blower Rotation TheTWE050, 075 and 100 air handler blower section can be rotated 180° to change the discharge pattern.This modification must be done in the field and requires an addition of kit. See unit installer's guide. Typical Horizontal Air Handler Application Typical Vertical Air Handler Application Typical Split System Application 6 SSP-PRC002-EN Selection Procedure Cooling Capacity Step 1 — Calculate the building’s total and sensible cooling loads at design conditions. Step 2 — Size the equipment usingTable PD-1. Match the cooling loads at design conditions. Example:The following are the building cooling requirements a Electrical Characteristics: 380-415/50/3 b Summer Design Conditions: Entering Evaporator Coil: 80 DB/67 WB (27 DB/19 WB°C) Outdoor Ambient: 95°F (35° C) c Total Cooling Load: 75 MBh (22kW) d Sensible Cooling Load: 53 MBh (15.5 kW) e Airflow: 2500 cfm (4247 m3/h) External Static Pressure: 0.77 in. wg (193 Pa) Table PD-1 shows that aTWA075A matched with aTWE075A has a gross cooling capacity of 85.1 MBh (24.9 kW) and 60.8 MBh (17.8 kW) sensible capacity at 95 DB (35°C) ambient and 2500 cfm (4247 m3/h) and 80 DB/67 WB (27 DB/19 WB) air entering the evaporator. To find the net cooling capacities, fan motor heat must be subtracted. Determine the total unit static pressure: External Static 0.77 in (193 Pa) Standard Filter 0.10 in (25 Pa) Supplementary Electric Heat 0.23 in (57 Pa) Total Static Pressure 1.10 in (275 Pa) SSP-PRC002-EN Note:The Evaporator Fan Performance Table has included the effect of a 1 in. (250 Pa) filter already.Therefore, the actualTotal Static Pressure is 1.10 - 0.10 = 1.00 in. (275 - 25 = 250 Pa). With 2500 cfm (4247 m3/h) and 1.00 inches (250 Pa),Table PD-15 shows a 1.07 bhp (0.8 kW). Note:The formula below the table can be used to calculate Fan Motor Heat, Constant x Motor Power = Fan Motor Heat 3.5 x bhp = MBh 3.5 x 1.07 = 3.75 MBh 1.375 x (kW) = kW 1.375 x 0.8 = 1.1 kW NetTotal Cooling Capacity = 85.1 MBh – 3.75 = 81.35 MBh = 24.9 kW - 1.1 = 23.8 kW Net Sensible Cooling Capacity = 60.8 MBh – 3.75 = 57.05 MBh = 17.8 MBh - 1.1 = 16.7 kW Heating Capacity Step 1 — Calculate the building heating load using theTrane calculation form or any other standard accepted method. Step 2 — Size the equipment usingTable PD-9 to match the heating loads at design conditions.The following are building heating requirements: a Total Heating Load: 110 MBh (32.2 kW) b Outdoor Ambient (Winter): 17°F (-8.3°C) DB c Indoor ReturnTemperature: 70°F (21.1°C) DB d Airflow: 2500 cfm (4247 m3/h) Table PD-9 indicates the mechanical heating portion of the heat pump will provide 49.1 MBh (14.4 kW) for the winter design conditions. Step 3 — Because 49.1 MBh (14.4 kW) is less than the building’s required heating capacity, a supplementary heater must be selected. 110 - 49.1 = 60.9 MBh (32.2 14.4 = 17.8 kW) minimum heater capacity. FromTable PD-25, the 24.22 kW heater has a capacity of 82,670 Btu. FromTable ED-5, the 24.22 kW heater at 400V indicates the heater model number is BAYHTRL435A.This heater will be adequate to cover the residual heat capacity needed for the application. Air Delivery Selection External static pressure drop through the air distribution system has been calculated to be 0.77 inches (192.5 Pa) of water gauge. FromTable PD-24 static pressure drop through the electric heater is 0.12 inches (30 Pa) of water (0.77 + 0.12 = .89 in.) (192.5 + 30 = 222.5 Pa). Enter Table PD-15 forTWE090A4 at 2500 cfm (4247 m3/h) and .90 in. (225 Pa) static pressure.The standard motor at 790 rpm will give the desired airflow. 7 Model Number Description Split System Heat Pump Model Nomenclature T W A 0 7 5 A D 0 0 D A 1 2 3 4 5 6 7 8 9 10 11 12 Digits 1, 2, 3 - Product Type Digit 8 - Electrical Characteristics TWA = Split System Heat Pump D = 380-415/3/50 Digits 4, 5, 6 - Nominal Gross Cooling Capacity (MBh) Digits 9, 10 - Factory - Installed Options 00 = No Options 0S = Black Epoxy Coated Coil 075 100 155 200 Digit 11- Minor Design Sequence D = Fourth = = = = 75 100 155 200 Digit 12- Service Digit Digit 7- Major Development Sequence A = First A = Single Compressor B = Dual Compressor Air Handler Model Nomenclature T W E 0 5 0 A D 0 0 C A 1 2 3 4 5 6 7 8 9 10 11 12 Digits 1, 2, 3 - Product Type TWE = Cooling Convertible Digit 8 - Electrical Characteristics D = 380-415/3/50 Digit 9, 10 - Factory - Installed Options Digits 4, 5, 6 - Nominal Gross Cooling Capacity (MBh) 050 075 100 155 200 = = = = = 50 75 100 155 200 00 = No Options Digit 11- Minor Design Sequence C = Third Digit 12- Service Digit A = First Digit 7- Refrigerant Circuit A = Single B = Dual 8 SSP-PRC002-EN General Data (Heat Pumps) Table GD-1 — General Data — Heat Pumps Cooling Performance1 Gross Cooling Capacity, Btu (kW) Matched Air Handler, Btu (kW) Heat Pump Only2, Btu (kW) ARI Net Cooling Capacity3 System Power kW Heat Pump Only Power kW Heating Performance ARI Heating with Matched Air Handler HighTemperature Capacity, Btu (kW) LowTemperature Capacity, Btu (kW) Compressor Number Type No. Motors Motor HP (kW) Motor RPM ARI Sound Rating (Bels)4 System Data5 No. Refrigerant Circuits Suction Line, in. (mm) OD Liquid Line, in. (mm) OD Outdoor Coil —Type Tube Size, in. (mm) OD Face Area, sq. ft (m2) Rows Fins Per Inch Outdoor FanType No. Used Diameter, in. (mm) DriveType No. Speeds CFM6, (m3/h) No. Motors Motor HP (kW) Motor RPM R-22 Refrigerant Charge, lb7 (kg) TWA075A TWA100A 85,000 (24.89) 85,000 (24.89) 83,000 (24.30) 7.91 7.12 112,000 (32.79) 112,000 (32.79) 108,000 (31.62) 10.27 9.32 81,000 (23.72) 49,000 (14.35) 110,000 (32.21) 71,000 (20.79) 1 3D®Scroll 1 6.25 (4.7) 2875 8.8 1 3D®Scroll 1 8.33 (6.21) 2875 8.8 1 1.375 (34.9) 0.500 (12.7) Plate Fin 0.375 (9.5) 19.2 (1.78) 2 18 Propeller 1 26.00 (660.4) Direct 1 4900 (8325.1) 1 0.33 (.25) 925 18.0 (8.16) 1 1.375 (34.9) 0.500 (12.7) Plate Fin 0.375 (9.5) 29.5 (2.74) 2 18 Propeller 1 28.00 (711) Direct 1 6700 (11383.30) 1 0.75 (.56) 925 31.5 (14.29) Notes: 1. Cooling Performance is rated at 95°F (35°C) ambient, 80°F (26.7°C) entering dry bulb, 67°F (19.4°C) entering wet bulb and nominal cfm listed. ARI rating cfm is 350 cfm/ton for this product. Gross capacity does not include the effect of fan motor heat. ARI capacity is net and includes the effect of fan motor heat. Units are suitable for operation to ±20% of nominal cfm. Rated accordance with ARI Standard 340/360-00. 2. Condensing Unit Only Gross Cooling Capacity rated at 45°F (7.2°C) saturated suction temperature and at 95°F (35°C) ambient. 3. ARI Net Cooling Capacity is calculated with matched blower coil and 25 ft (7.2 m) of 1.375, 0.500 OD interconnecting tubing. EER and/or SEER are rated at ARI conditions and in accordance with DOE test procedures. Integrated Part Load Value is based on ARI Standard 340/360-00. Units are rated at 80°F (26.7°C) ambient, 80°F (26.7°C) entering dry bulb, and 67°F (19.4°C) entering wet bulb at ARI rated cfm. 4. ARI Sound Rating is rated in accordance with ARI Standard 270 or 370. 5. System Data based on maximum linear length 80 ft (26.7 m). Maximum lift: suction 60 ft (18.3 m) liquid 60 ft (18.3 m). For greater lengths, refer to refrigerant piping applications manual. 6. Outdoor Fan cfm is rated with standard air-dry coil outdoor. 7. Refrigerant (operating) charge is for condensing unit (all circuits) with matching blower coils and 25 ft (7.6 m) of interconnecting refrigerant lines. SSP-PRC002-EN 9 General Data (Heat Pumps) Table GD-2 General Data — Heat Pumps Cooling Performance1 Gross Cooling Capacity, Btu (kW) Matched Air Handler, Btu (kW) Condensing Unit Only2, Btu (kW) ARI Net Cooling Capacity3 System Power kW Condensing Unit Power kW Heating Performance ARI Heating with Matched Air Handler HighTemperature Capacity, Btu (kW) LowTemperature Capacity, Btu (kW) Compressor Number Type No. Motors Motor HP Motor RPM, (kW) ARI Sound Rating (Bels)4 System Data5 No. Refrigerant Circuits Suction Line, in. (mm) OD Liquid Line, in. (mm) OD Outdoor Coil —Type Tube Size, in. (mm) OD Face Area, sq. ft (m2) Rows Fins Per Inch Outdoor FanType No. Used Diameter, in. (mm) DriveType No. Speeds CFM6, (m3/h) No. Motors Motor HP (kW) Motor RPM R-22 Refrigerant Charge, lb7 (kg) TWA155B TWA200B 167,000 (48.9) 167,000 (48.9) 162,000 (47.43) 15.67 13.91 218,000 (63.83) 218,000 (63.83) 211,000 (61.78) 21.51 19.1 166,000 (48.6) 101,000 (29.57) 214,000 (62.66) 139,000 (40.70) 2 3D®Scroll 2 6.25 (4.7) 2875 2 3D®Scroll 2 8.33 (6.21) 2875 8.8 8.8 2 1.375 (34.9) 0.500 (12.7) Plate Fin 0.375 (9.5) 38.4 (3.57) 2 18 Propeller 2 26.00 (660.4) Direct 1 9800 (16650.2) 2 0.33 (.25) 925 36.0 (16.33) 2 1.375 (34.9) 0.500 (12.7) Plate Fin 0.375 (9.5) 48 (4.46) 2 18 Propeller 2 28.00 (711) Direct 1 13400 (22766.60) 2 0.75 (.56) 925 48.5 (22.0) Notes: 1. Cooling Performance is rated at 95°F (35°C) ambient, 80°F (26.7°C) entering dry bulb, 67°F (19.4°C) entering wet bulb and nominal cfm listed. ARI rating cfm is 350 cfm/ton for this product. Gross capacity does not include the effect of fan motor heat. ARI capacity is net and includes the effect of fan motor heat. Units are suitable for operation to ±20% of nominal cfm. Rated accordance with ARI Standard 340/360-00. 2. Condensing Unit Only Gross Cooling Capacity rated at 45°F (7.6°C) saturated suction temperature and at 95°F (35°C) ambient. 3. ARI Net Cooling Capacity is calculated with matched blower coil and 25 ft (7.6 m) of 1.375, 0.500 OD interconnecting tubing. EER and/or SEER are rated at ARI conditions and in accordance with DOE test procedures. Integrated Part Load Value is based on ARI Standard 340/360-00. Units are rated at 80°F (26.7°C) ambient, 80°F (26.7°C) entering dry bulb, and 67°F (19.4°C) entering wet bulb at ARI rated cfm. 4. ARI Sound Rating is rated in accordance with ARI Standard 270 or 370. 5. System Data based on maximum linear length 80 ft (26.7 m)Maximum lift: suction 60 ft (18.3 m) liquid 60 ft (18.3 m) For greater lengths, refer to refrigerant piping applications manual. 6. Outdoor Fan cfm is rated with standard air-dry coil outdoor. 7. Refrigerant (operating) charge is for condensing unit (all circuits) with matching blower coils and 25 ft (7.6 m) of interconnecting refrigerant lines. 10 SSP-PRC002-EN General Data (Air Handlers) Table GD-3 — General Data — Air Handlers TWE050A TWE075A TWE100A TWE100B System Data1 No. Refrigerant Circuits 1 1 1 2 Suction Line, in. (mm) OD 1.120 (28.4) 1.380 (35.0) 1.380 (35.0) 1.380 (35.0) Liquid Line, in. (mm) OD 0.38 (9.7) 0.50 (12.7) 0.50 (12.7) 0.50 (12.7) Indoor Coil — Type Plate Fin Plate Fin Plate Fin Plate Fin Tube Size, in. (mm) OD 0.375 (9.5) 0.375 (9.5) 0.375 (9.5) 0.375 (9.5) Face Area, sq. ft (m2) 5.00 (.47) 8.07 (.75) 11.18 (1.0) 11.18 (1.0) Rows 3 3 4 4 Fins Per Inch 12 12 12 12 Refrigerant Control Expansion Valve Expansion Valve Expansion Valve Expansion Valve Drain Connection No. 4 4 4 4 Drain Connection Size, in. (mm) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) 0.75 (19.0) Drain Connection Type PVC PVC PVC PVC Indoor Fan Type FC Centrifugal FC Centrifugal FC Centrifugal FC Centrifugal No. Used 1 1 1 1 Diameter, in. (mm) 12.0 (304.8) 15.0 (381) 15.0 (381) 15.0 (381) Width, in. (mm) 12.0 (304.8) 15.0 (381) 15.0 (381) 15.0 (381) DriveType Belt Belt Belt Belt No. Speeds 1 1 1 1 CFM, (m3/h) 1670 (2837) 2500 (4247) 3325 (5649) 3325 (5649) No. Motors 1 1 1 1 Motor HP (kW) — Standard/Oversized 0.75/1.0 (.55/.74) 1.0/1.5 (.74/1.11) 1.5/2.0 (1.11/1.49) 1.5/2.0 (1.11/1.49) Motor RPM (Standard) 1425 1425 1425 1425 Motor Frame Size (Standard) 56 56 56 56 Filters — Type Throwaway Throwaway Throwaway Throwaway Furnished Yes Yes Yes Yes No. 1/1 3 4 4 Recommended Size, in. (mm) 16x20x1/20x20x1 16x25x1 16x25x1 16x25x1 (406.4x508x25.4/ (406.4/635/25.4) (406.4/635/25.4) (406.4/635/25.4) 4/508x508x25.4) Table GD-3 — General Data — Continued System Data No. Refrigerant Circuits Suction Line, in. (mm) OD Liquid Line, in. (mm) OD Indoor Coil — Type Tube Size, in. (mm) OD Face Area, sq. ft (m2) Rows Fins Per Inch Refrigerant Control Drain Connection No. Drain Connection Size, in. (mm) Drain Connection Type Indoor Fan Type No. Used Diameter, in. (mm) Width, in. (mm) DriveType No. Speeds CFM, (m3/h) No. Motors Motor HP (kW) — Standard/Oversized Motor RPM (Standard) Motor Frame Size (Standard) Filters — Type Furnished No. Recommended Size, in. (mm) TWE155B TWE200B 2 1.38 (35.0) 0.500 (12.7) Plate Fin 0.375 (9.5) 16.33 (1.52) 3 12 Expansion Valve 4 1.000 (25.4) PVC FC Centrifugal 2 15.0 (381) 15.0 (381) Belt 1 5000 (8494) 1 2 1.38 (35.0) 0.500 (12.7) Plate Fin 0.375 (9.5) 21.63 (2.01) 3 12 Expansion Valve 4 1.000 (25.4) PVC FC Centrifugal 2 15.0 (381) 15.0 (381) Belt 1 6650 (11297) 1 2.0/3.0 (1.49/2.24) 1425 145T Throwaway Yes 8 15x20x2 (381x508x50.8) 3.0/5.0 (2.24/3.72) 1425 184T Throwaway Yes 4/4 16x20x2/16x25x2 (406.4x508x50.8/406.4x635x50.8) Notes: 1. ARI certified with various condensing units per ARI Standard 210/240 or 340/360-00 certification program. Refer to Performance Data section in this catalog. SSP-PRC002-EN 11 Performance Data (System) Table PD-1 — Gross Cooling Capacities (MBh) TWA075A Heat Pump with TWE075A Air Handler (I-P) 85 Enter. Dry Bulb CFM 2250 2500 2750 3000 (°F) 61 67 95 73 61 67 Ambient Temperature (°F) Entering Wet Bulb (°F) 73 61 105 115 67 73 61 67 73 Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. 75 78.1 61.6 86.4 51.4 95.4 35.1 75.4 60.3 83.4 50.1 91.9 33.9 72.3 58.8 79.9 48.7 88.0 32.5 68.7 57.0 75.9 47.1 83.7 31.0 80 85 78.4 80.2 71.9 86.6 59.4 95.4 46.0 80.2 86.7 69.6 95.5 56.5 75.9 78.0 70.6 83.6 58.1 92.0 44.7 72.8 69.1 80.1 56.6 88.1 43.2 69.4 67.4 76.0 54.8 83.7 41.6 78.0 83.7 68.2 92.1 55.2 75.4 75.4 80.2 66.7 88.2 53.8 72.3 72.3 76.3 64.9 83.9 52.2 90 84.3 84.3 87.1 79.9 95.6 67.0 82.0 82.0 84.2 78.6 92.2 65.7 79.3 79.3 80.9 77.0 88.3 64.1 76.1 76.1 77.1 75.4 84.0 62.4 75 79.6 64.6 88.1 50.6 96.9 35.8 76.9 63.2 84.9 49.3 93.4 34.6 73.6 61.6 81.3 47.8 89.3 33.2 69.9 59.8 77.2 46.1 84.8 31.6 80 85 80.2 82.9 75.9 88.2 62.1 97.0 47.5 82.9 88.3 73.2 97.1 59.0 77.6 80.6 74.5 85.1 60.8 93.4 46.2 74.5 73.0 81.4 59.1 89.4 44.7 70.7 70.6 77.3 57.3 85.0 43.1 80.6 85.2 71.8 93.6 57.7 77.8 77.8 81.6 70.2 89.6 56.3 74.6 74.6 77.6 68.5 85.2 54.7 90 87.2 87.2 89.0 84.5 97.1 70.3 84.7 84.7 86.1 83.2 93.7 68.9 81.8 81.8 82.6 81.7 89.7 67.4 78.6 78.6 78.6 78.6 85.3 65.7 75 81.0 67.3 89.4 52.3 98.2 36.5 78.1 65.9 86.1 51.0 94.6 35.1 74.8 64.3 82.4 49.5 90.4 33.7 71.0 62.5 78.2 47.8 85.8 32.0 80 85 81.8 85.3 79.7 89.4 64.6 98.3 48.9 85.3 89.7 76.6 98.4 61.4 79.1 82.8 78.3 86.2 63.2 94.7 47.6 75.7 75.7 82.5 61.6 90.5 46.2 72.5 72.5 78.3 59.8 86.0 44.6 82.8 86.5 75.3 94.8 60.1 79.9 79.9 82.9 73.7 90.7 58.6 76.6 76.6 78.8 71.9 86.2 57.0 90 89.7 89.7 90.8 89.1 98.5 73.5 87.1 87.1 87.8 87.7 94.9 72.1 84.1 84.1 84.2 84.2 90.9 70.6 80.6 80.6 80.7 80.7 86.4 68.9 75 82.1 70.0 90.5 54.0 99.3 36.9 79.2 68.6 87.2 52.6 95.6 35.6 75.8 67.0 83.3 51.1 91.3 34.1 71.9 65.1 79.1 49.4 86.6 32.5 80 85 82.8 87.4 82.8 90.6 67.0 99.4 50.3 87.4 90.9 80.0 99.5 63.7 80.4 84.8 80.4 87.3 65.6 95.7 49.0 77.5 77.5 83.5 64.0 91.5 47.5 74.1 74.1 79.2 62.2 86.9 45.9 84.8 87.7 78.6 95.9 62.4 81.7 81.7 84.0 77.0 91.6 60.7 78.3 78.3 79.9 75.2 87.0 59.0 90 91.9 91.9 92.0 92.0 99.7 76.6 89.2 89.2 89.3 89.3 96.0 75.2 86.0 86.0 86.1 86.1 91.8 73.6 82.5 82.5 82.6 82.6 87.3 71.9 Note: All temperatures are in degrees Fahrenheit. Airflow is in cfm. Table PD-1— Gross Cooling Capacities (kW) TWA075A Heat Pump with TWE075A Air Handler (SI) 29.4 Enter. Dry Bulb 3 16.1 19.4 35.0 22.8 16.1 19.4 AmbientTemperature (°C) Entering Wet Bulb (°C) 22.8 16.1 40.6 19.4 46.1 22.8 16.1 19.4 22.8 m /h (°C) 3823 24 22.9 18.0 25.3 15.0 27.9 10.3 22.1 17.7 24.4 14.7 26.9 27 29 23.0 23.5 21.1 25.4 17.4 27.9 13.5 23.5 25.4 20.4 28.0 16.5 22.2 22.8 20.7 24.5 17.0 26.9 13.1 21.3 20.2 23.4 16.6 25.8 12.7 20.3 19.7 22.3 16.0 24.5 12.2 22.8 24.5 20.0 27.0 16.2 22.1 22.1 23.5 19.5 25.8 15.7 21.2 21.2 22.3 19.0 24.6 15.3 32 24.7 24.7 25.5 23.4 28.0 19.6 24.0 24.0 24.7 23.0 27.0 19.3 23.2 23.2 23.7 22.6 25.9 18.8 22.3 22.3 22.6 22.1 24.6 18.3 24 23.3 18.9 25.8 14.8 28.4 10.5 22.5 18.5 24.9 14.4 27.3 10.1 21.6 18.0 23.8 14.0 26.2 27 29 23.5 24.3 22.2 25.8 18.2 28.4 13.9 24.3 25.9 21.4 28.4 17.3 22.7 23.6 21.8 24.9 17.8 27.4 13.5 21.8 21.4 23.8 17.3 26.2 13.1 20.7 20.7 22.6 16.8 24.9 12.6 23.6 25.0 21.0 27.4 16.9 22.8 22.8 23.9 20.6 26.2 16.5 21.8 21.8 22.7 20.0 24.9 16.0 32 25.5 25.5 26.1 24.8 28.4 20.6 24.8 24.8 25.2 24.4 27.4 20.2 24.0 24.0 24.2 23.9 26.3 19.7 23.0 23.0 23.0 23.0 25.0 19.2 4248 4672 5097 Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. 9.9 21.2 17.2 23.4 14.3 25.8 9.5 9.7 9.9 20.1 16.7 22.2 13.8 24.5 20.5 17.5 22.6 13.5 24.8 20.8 18.3 22.9 14.0 25.1 9.1 9.2 24 23.7 19.7 26.2 15.3 28.8 10.7 22.9 19.3 25.2 14.9 27.7 10.3 21.9 18.8 24.1 14.5 26.5 27 29 24.0 25.0 23.3 26.2 18.9 28.8 14.3 25.0 26.3 22.4 28.8 18.0 23.2 24.3 22.9 25.3 18.5 27.7 13.9 22.2 22.2 24.2 18.0 26.5 13.5 21.2 21.2 22.9 17.5 25.2 13.0 24.3 25.3 22.0 27.8 17.6 23.4 23.4 24.3 21.6 26.6 17.2 22.4 22.4 23.1 21.1 25.2 16.7 9.4 32 26.3 26.3 26.6 26.1 28.8 21.5 25.5 25.5 25.7 25.7 27.8 21.1 24.6 24.6 24.6 24.6 26.6 20.7 23.6 23.6 23.6 23.6 25.3 20.2 24 24.0 20.5 26.5 15.8 29.1 10.8 23.2 20.1 25.5 15.4 28.0 10.4 22.2 19.6 24.4 15.0 26.7 10.0 21.1 19.1 23.1 14.5 25.4 27 29 24.3 25.6 24.3 26.5 19.6 29.1 14.7 25.6 26.6 23.4 29.1 18.7 23.5 24.8 23.5 25.6 19.2 28.0 14.4 22.7 22.7 24.5 18.7 26.8 13.9 21.7 21.7 23.2 18.2 25.4 13.4 24.8 25.7 23.0 28.1 18.3 23.9 23.9 24.6 22.5 26.8 17.8 22.9 22.9 23.4 22.0 25.5 17.3 32 26.9 26.9 26.9 26.9 29.2 22.4 26.1 26.1 26.1 26.1 28.1 22.0 25.2 25.2 25.2 25.2 26.9 21.6 24.2 24.2 24.2 24.2 25.6 21.1 9.5 Note: All temperatures are in degrees Celsius. Airflow is in liters per second. 12 SSP-PRC002-EN Performance Data (System) Table PD-2 — Gross Cooling Capacities (MBh) TWA100A Heat Pump with TWE100A Air Handler (I-P) 85 Enter. Dry Bulb CFM 3000 3325 3650 3975 (°F) 61 67 95 73 61 67 AmbientTemperature (°F) Entering Wet Bulb (°F) 73 61 105 67 115 73 61 67 73 Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. 75 103.1 81.2 113.7 68.1 125.2 46.1 80 85 103.4 94.5 113.9 77.5 125.1 59.9 99.7 92.6 109.7 75.6 120.5 58.2 95.8 90.6 105.3 73.7 115.7 56.3 91.7 88.5 100.7 71.8 110.6 54.4 105.4 105.4 113.9 90.8 125.2 73.3 102.2 102.2 109.7 88.8 120.6 71.5 98.9 98.9 105.4 86.8 115.8 69.7 95.3 95.3 100.8 84.8 110.8 67.8 99.3 79.2 109.5 66.4 120.5 44.4 95.2 77.2 105.1 64.6 115.7 42.7 91.0 75.1 100.5 62.7 110.6 41.0 90 110.6 110.6 114.3 103.9 125.3 86.6 75 105.0 84.7 115.8 66.1 127.2 46.9 101.1 82.8 111.4 64.3 122.4 45.3 96.9 80.7 106.9 62.4 117.4 43.5 92.5 78.5 102.2 60.4 112.2 41.6 107.3 107.3 110.2 102.0 120.7 84.8 103.8 103.8 106.0 100.1 115.9 83.0 100.2 100.2 101.6 98.1 110.9 81.1 80 85 105.6 99.3 115.9 80.8 127.1 61.8 101.8 97.4 111.6 78.9 122.4 60.0 97.8 95.3 107.0 77.0 117.4 58.1 93.7 93.3 102.3 75.1 112.2 56.2 108.7 108.7 115.9 95.1 127.2 76.3 105.4 105.4 111.6 93.2 122.5 74.5 101.9 101.9 107.1 91.1 117.5 72.6 98.2 98.2 102.5 89.1 112.4 70.7 90 114.1 114.1 116.6 109.5 127.3 90.7 110.6 110.6 112.5 107.6 122.6 88.9 107.0 107.0 108.2 105.6 117.7 87.1 103.2 103.2 103.8 103.7 112.4 84.9 75 106.6 88.1 117.4 68.2 128.8 47.8 80 85 107.6 103.9 117.6 84.0 128.8 63.5 103.7 102.0 113.1 82.1 123.9 61.7 99.1 99.1 108.5 80.2 118.8 59.8 95.4 95.4 103.6 77.9 113.5 57.9 111.6 111.6 117.6 99.3 128.9 79.1 108.1 108.1 113.2 97.3 124.1 77.3 104.5 104.5 108.7 95.3 119.0 75.5 100.6 100.6 104.0 93.2 113.7 73.5 102.6 86.1 113.0 66.3 123.9 46.0 98.3 84.0 108.3 64.4 118.8 44.1 93.9 81.9 103.5 62.4 113.4 42.2 90 117.1 117.1 118.7 114.9 129.0 94.7 113.5 113.5 114.5 113.0 124.2 92.9 109.8 109.8 109.7 109.7 119.0 90.7 105.8 105.8 105.7 105.7 113.8 88.6 75 108.1 91.4 118.9 70.1 130.2 48.3 103.9 89.3 114.3 68.3 125.2 46.5 99.6 87.2 109.6 66.3 120.0 44.7 95.1 85.1 104.6 64.3 114.5 42.8 80 85 109.4 108.4 119.0 87.0 130.3 65.2 105.0 105.0 114.4 84.9 125.3 63.3 101.3 101.3 109.7 82.9 120.1 61.5 97.5 97.5 104.7 80.8 114.7 59.5 114.2 114.2 119.1 103.3 130.4 81.9 110.6 110.6 114.7 101.3 125.4 80.1 106.8 106.8 110.1 99.3 120.2 78.2 102.8 102.8 105.3 97.2 114.8 76.2 90 119.9 119.9 120.7 120.2 130.4 98.3 116.2 116.2 116.1 116.1 125.4 96.3 112.2 112.2 112.2 112.2 120.3 94.3 108.1 108.1 108.1 108.1 114.9 92.3 Note: All temperatures are in degrees Fahrenheit. Airflow is in cfm. Table PD-2 — Gross Cooling Capacities (kW) TWA100A Heat Pump with TWE100A Air Handler (SI) 29.4 Enter. Dry Bulb 3 16.1 19.4 35.0 22.8 16.1 19.4 Ambient Temperature (°C) Entering Wet Bulb (°C) 22.8 16.1 40.6 19.4 46.1 22.8 16.1 19.4 22.8 m /h (°C) 5097 24 30.2 23.8 33.3 19.9 36.6 13.5 29.1 23.2 32.1 19.4 35.3 13.0 27.9 22.6 30.8 18.9 33.9 12.5 26.6 22.0 29.4 18.4 32.4 12.0 27 29 30.3 30.9 27.7 33.3 22.7 36.6 17.5 30.9 33.3 26.6 36.7 21.5 29.2 29.9 27.1 32.1 22.1 35.3 17.0 28.0 26.5 30.8 21.6 33.9 16.5 26.9 25.9 29.5 21.0 32.4 15.9 29.9 32.1 26.0 35.3 20.9 28.9 28.9 30.8 25.4 33.9 20.4 27.9 27.9 29.5 24.8 32.4 19.8 32 32.4 32.4 33.5 30.4 36.7 25.4 31.4 31.4 32.3 29.9 35.3 24.8 30.4 30.4 31.0 29.3 33.9 24.3 29.3 29.3 29.8 28.7 32.5 23.7 24 30.7 24.8 33.9 19.4 37.2 13.7 29.6 24.2 32.6 18.8 35.8 13.3 28.4 23.6 31.3 18.3 34.4 12.8 27.1 23.0 29.9 17.7 32.8 12.2 27 29 30.9 31.8 29.1 33.9 23.7 37.2 18.1 31.8 33.9 27.8 37.3 22.3 29.8 30.9 28.5 32.7 23.1 35.8 17.6 28.6 27.9 31.3 22.6 34.4 17.0 27.4 27.3 30.0 22.0 32.9 16.5 30.9 32.7 27.3 35.9 21.8 29.8 29.8 31.4 26.7 34.4 21.3 28.7 28.7 30.0 26.1 32.9 20.7 32 33.4 33.4 34.1 32.1 37.3 26.6 32.4 32.4 32.9 31.5 35.9 26.0 31.3 31.3 31.7 30.9 34.4 25.5 30.2 30.2 30.4 30.3 32.9 24.8 5649 6201 6754 Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. 24 31.2 25.8 34.4 20.0 37.7 14.0 30.0 25.2 33.1 19.4 36.3 13.5 28.8 24.6 31.7 18.9 34.8 12.9 27.5 24.0 30.3 18.3 33.2 12.4 27 29 31.5 32.7 30.4 34.4 24.6 37.7 18.6 32.7 34.4 29.1 37.8 23.2 30.4 31.7 29.9 33.1 24.0 36.3 18.1 29.0 29.0 31.8 23.5 34.8 17.5 27.9 27.9 30.3 22.8 33.2 17.0 31.7 33.2 28.5 36.3 22.6 30.6 30.6 31.8 27.9 34.8 22.1 29.5 29.5 30.4 27.3 33.3 21.5 32 34.3 34.3 34.8 33.7 37.8 27.7 33.2 33.2 33.5 33.1 36.4 27.2 32.1 32.1 32.1 32.1 34.8 26.5 31.0 31.0 31.0 31.0 33.3 25.9 24 31.6 26.7 34.8 20.5 38.1 14.2 30.4 26.2 33.5 20.0 36.7 13.6 29.2 25.5 32.1 19.4 35.1 13.1 27.8 24.9 30.6 18.8 33.5 12.5 27 29 32.0 33.4 31.7 34.8 25.5 38.1 19.1 33.4 34.9 30.2 38.2 24.0 30.8 32.4 30.8 33.5 24.9 36.7 18.5 29.7 29.7 32.1 24.3 35.2 18.0 28.5 28.5 30.7 23.7 33.6 17.4 32.4 33.6 29.7 36.7 23.4 31.3 31.3 32.2 29.1 35.2 22.9 30.1 30.1 30.8 28.5 33.6 22.3 32 35.1 35.1 35.3 35.2 38.2 28.8 34.0 34.0 34.0 34.0 36.7 28.2 32.9 32.9 32.8 32.8 35.2 27.6 31.7 31.7 31.6 31.6 33.6 27.0 Note: All temperatures are in degrees Celsius. Airflow is in liters per second. SSP-PRC002-EN 13 Performance Data (System) Table PD-3 — Gross Cooling Capacities (MBh) TWA155B Heat Pump with TWE155B Air Handler (I-P) 85 Enter. Dry Bulb CFM 4500 5000 5500 6000 61 67 95 73 61 67 AmbientTemperature (°F) Entering Wet Bulb (°F) 73 61 105 67 115 73 61 67 73 (°F) Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. 75 153.9 122.2 170.3 101.7 187.8 69.2 148.7 119.6 164.4 99.3 181.0 66.9 142.5 116.5 157.4 96.5 173.3 64.2 135.4 113.0 149.5 93.3 164.6 61.2 80 85 154.6 142.7 170.6 117.7 187.8 90.9 149.6 140.2 164.7 115.2 181.1 88.4 143.6 137.2 157.6 111.9 173.4 85.5 136.8 133.8 149.8 108.5 164.9 82.4 158.5 158.5 170.8 138.0 188.1 112.0 154.2 154.2 165.0 135.4 181.4 109.5 149.0 149.0 158.1 132.3 173.8 106.7 143.0 143.0 150.3 128.9 165.3 103.5 90 166.7 166.7 171.7 158.7 188.2 132.8 162.1 162.1 166.0 156.1 181.6 130.1 156.7 156.7 159.3 153.1 174.0 127.1 150.5 150.5 152.0 149.8 165.5 123.8 75 157.0 128.0 173.4 100.2 190.8 70.5 151.6 125.3 167.3 97.7 183.8 68.1 145.1 122.2 160.0 94.7 175.8 65.4 137.8 118.6 152.0 91.4 166.9 62.2 80 85 158.1 150.6 173.5 122.9 190.9 94.0 152.9 148.0 167.4 120.2 184.0 91.4 146.8 145.0 160.3 117.1 176.1 88.5 139.6 139.6 152.3 113.6 167.3 85.4 163.9 163.9 174.0 145.2 191.2 117.0 159.3 159.3 167.9 142.5 184.3 114.5 153.7 153.7 160.8 139.4 176.5 111.6 147.4 147.4 152.9 135.9 167.7 108.5 90 172.3 172.3 175.4 168.0 191.4 139.5 167.5 167.5 169.6 165.3 184.5 136.8 161.7 161.7 162.9 162.3 176.7 133.7 155.2 155.2 155.4 155.4 168.0 130.4 75 159.6 133.5 176.0 103.6 193.4 71.9 154.0 130.8 169.6 101.0 186.1 69.3 147.3 127.6 162.2 98.0 177.9 66.3 139.8 124.0 153.9 94.7 168.8 63.2 80 85 161.2 158.2 176.2 128.0 193.5 96.9 156.0 155.6 169.9 125.2 186.4 94.3 149.6 149.6 162.5 122.0 178.3 91.4 143.2 143.2 154.3 118.5 169.3 88.2 168.5 168.5 176.7 152.1 193.8 121.9 163.6 163.6 170.5 149.4 186.8 119.3 157.8 157.8 163.2 146.2 178.4 116.0 151.2 151.2 155.2 142.8 169.6 112.6 90 177.2 177.2 178.8 177.0 194.1 145.9 172.1 172.1 172.3 172.3 187.0 143.2 166.1 166.1 166.2 166.2 179.0 140.1 159.3 159.3 159.5 159.5 170.1 136.7 75 161.7 138.8 178.2 106.8 195.5 72.8 156.0 136.0 171.6 104.2 188.1 70.2 149.3 132.8 164.1 101.2 179.7 67.2 141.7 129.2 155.6 97.9 170.4 64.0 80 85 163.6 163.6 178.4 132.8 195.7 99.7 158.8 158.8 172.0 130.0 188.4 97.1 152.9 152.9 164.4 126.8 180.1 94.2 146.3 146.3 156.1 123.2 171.0 91.0 172.6 172.6 179.1 158.8 196.0 126.5 167.5 167.5 172.7 156.1 188.6 123.4 161.4 161.4 165.4 152.9 180.4 120.3 154.6 154.6 157.3 149.4 171.4 116.9 90 181.5 181.5 181.7 181.7 196.3 152.1 176.2 176.2 176.4 176.4 189.1 149.3 169.9 169.9 170.1 170.1 180.9 146.2 162.9 162.9 163.1 163.1 171.9 142.8 Note: All temperatures are in degrees Fahrenheit. Airflow is in cfm. Table PD-3 — Gross Cooling Capacities (kW) TWA155B Heat Pump with TWE155B Air Handler (SI) 29.4 Enter. Dry Bulb 3 16.1 19.4 35.0 22.8 16.1 19.4 AmbientTemperature (°C) Entering Wet Bulb (°C) 22.8 16.1 40.6 19.4 46.1 22.8 16.1 19.4 22.8 m /h (°C) 7646 24 45.1 35.8 49.9 29.8 55.0 20.3 43.5 35.0 48.1 29.1 53.0 19.6 41.7 34.1 46.1 28.2 50.7 18.8 39.6 33.1 43.8 27.3 48.2 17.9 27 29 45.3 46.4 41.8 50.0 34.5 55.0 26.6 46.4 50.0 40.4 55.1 32.8 43.8 45.1 41.0 48.2 33.7 53.0 25.9 42.0 40.2 46.1 32.8 50.8 25.0 40.1 39.2 43.9 31.8 48.3 24.1 45.1 48.3 39.6 53.1 32.1 43.6 43.6 46.3 38.7 50.9 31.2 41.9 41.9 44.0 37.7 48.4 30.3 32 48.8 48.8 50.3 46.5 55.1 38.9 47.5 47.5 48.6 45.7 53.2 38.1 45.9 45.9 46.7 44.8 50.9 37.2 44.1 44.1 44.5 43.9 48.5 36.3 24 46.0 37.5 50.8 29.3 55.9 20.7 44.4 36.7 49.0 28.6 53.8 19.9 42.5 35.8 46.9 27.7 51.5 19.1 40.3 34.7 44.5 26.8 48.9 18.2 27 29 46.3 48.0 44.1 50.8 36.0 55.9 27.5 48.0 50.9 42.5 56.0 34.3 44.8 46.6 43.3 49.0 35.2 53.9 26.8 43.0 42.4 46.9 34.3 51.6 25.9 40.9 40.9 44.6 33.3 49.0 25.0 46.6 49.2 41.7 54.0 33.5 45.0 45.0 47.1 40.8 51.7 32.7 43.2 43.2 44.8 39.8 49.1 31.8 32 50.5 50.5 51.3 49.2 56.0 40.8 49.0 49.0 49.6 48.4 54.0 40.0 47.4 47.4 47.7 47.5 51.7 39.2 45.4 45.4 45.5 45.5 49.2 38.2 8495 9345 10194 Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. 24 46.7 39.1 51.5 30.3 56.6 21.0 45.1 38.3 49.7 29.6 54.5 20.3 43.1 37.4 47.5 28.7 52.1 19.4 40.9 36.3 45.1 27.7 49.4 18.5 27 29 47.2 49.3 46.3 51.6 37.5 56.7 28.4 49.3 51.7 44.5 56.8 35.7 45.7 47.9 45.6 49.7 36.7 54.6 27.6 43.8 43.8 47.6 35.7 52.2 26.8 41.9 41.9 45.2 34.7 49.6 25.8 47.9 49.9 43.7 54.7 34.9 46.2 46.2 47.8 42.8 52.2 34.0 44.3 44.3 45.4 41.8 49.7 33.0 32 51.9 51.9 52.3 51.8 56.8 42.7 50.4 50.4 50.4 50.4 54.8 41.9 48.6 48.6 48.7 48.7 52.4 41.0 46.6 46.6 46.7 46.7 49.8 40.0 24 47.4 40.6 52.2 31.3 57.2 21.3 45.7 39.8 50.3 30.5 55.1 20.5 43.7 38.9 48.0 29.6 52.6 19.7 41.5 37.8 45.6 28.7 49.9 18.8 27 29 47.9 50.5 47.9 52.2 38.9 57.3 29.2 50.5 52.4 46.5 57.4 37.0 46.5 49.0 46.5 50.4 38.1 55.2 28.4 44.8 44.8 48.2 37.1 52.7 27.6 42.8 42.8 45.7 36.1 50.1 26.6 49.0 50.6 45.7 55.2 36.1 47.3 47.3 48.4 44.8 52.8 35.2 45.3 45.3 46.0 43.7 50.2 34.2 32 53.2 53.2 53.2 53.2 57.5 44.5 51.6 51.6 51.6 51.6 55.4 43.7 49.8 49.8 49.8 49.8 53.0 42.8 47.7 47.7 47.8 47.8 50.3 41.8 Note: All temperatures are in degrees Celsius. Airflow is in liters per second. 14 SSP-PRC002-EN Performance Data (System) Table PD-4 — Gross Cooling Capacities (MBh) TWA200B Heat Pump with TWE200B Air Handler (I-P) 85 Enter. Dry Bulb CFM 6000 6675 7350 8025 61 67 95 73 61 67 AmbientTemperature (°F) Entering Wet Bulb (°F) 73 61 105 67 115 73 61 67 73 (°F) Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. 75 203.1 161.9 223.6 134.6 245.6 90.5 195.3 158.0 215.0 131.1 236.2 87.2 187.1 153.8 206.1 127.5 226.3 83.8 178.5 149.6 196.9 123.8 216.2 80.4 80 85 204.0 189.2 223.9 154.6 245.5 118.7 196.4 185.3 215.4 150.9 236.2 115.1 188.5 181.3 206.5 147.1 226.5 111.5 180.4 177.1 197.1 142.8 216.4 107.8 209.2 209.2 224.1 181.3 245.8 146.0 202.6 202.6 215.6 177.5 236.5 142.5 195.6 195.6 206.8 173.4 226.8 138.8 188.4 188.4 197.6 169.3 216.8 135.1 90 219.3 219.3 225.1 208.3 246.0 173.3 212.6 212.6 216.9 204.5 236.8 169.7 205.4 205.4 208.4 200.6 226.9 165.4 198.1 198.1 199.8 196.6 217.0 161.4 75 206.9 169.4 227.5 131.5 249.5 92.2 198.8 165.3 218.7 127.8 239.7 88.9 190.3 161.2 209.5 124.0 229.7 85.4 181.6 156.9 200.0 120.1 219.2 81.6 80 85 208.4 199.4 227.8 161.7 249.5 122.5 200.6 195.4 218.8 157.5 239.8 119.0 192.7 191.4 209.7 153.5 229.8 115.3 184.1 184.1 200.3 149.3 219.5 111.5 215.7 215.7 228.0 190.5 249.7 152.4 208.8 208.8 219.3 186.6 240.1 148.8 201.6 201.6 210.3 182.5 230.2 145.1 194.0 194.0 201.0 178.4 219.9 141.3 90 226.3 226.3 229.8 220.2 249.8 181.5 219.2 219.2 221.5 216.4 240.3 177.7 211.7 211.7 213.0 212.4 230.4 173.8 204.0 204.0 203.9 203.9 220.1 169.7 75 210.0 176.5 230.7 135.8 252.6 93.8 201.8 172.4 221.7 132.1 242.7 90.2 193.1 168.2 212.3 128.3 232.3 86.5 184.3 163.9 202.6 124.4 221.6 82.8 80 85 212.3 209.2 230.9 167.8 252.7 126.2 203.5 203.5 221.9 163.9 242.8 122.6 196.3 196.3 212.6 159.8 232.6 118.9 188.6 188.6 202.9 155.6 222.0 115.1 221.4 221.4 231.4 199.3 253.0 158.4 214.2 214.2 222.6 195.4 243.2 154.8 206.7 206.7 213.4 191.3 233.0 151.1 198.9 198.9 204.0 187.2 222.4 147.3 90 232.3 232.3 234.1 231.7 253.1 189.6 225.0 225.0 224.8 224.8 243.4 185.8 217.2 217.2 217.1 217.1 233.2 181.8 209.2 209.2 209.1 209.1 222.7 177.7 75 212.7 183.3 233.5 140.0 255.3 95.0 204.4 179.2 224.2 136.2 245.1 91.4 195.6 175.0 214.6 132.4 234.6 87.7 186.7 170.6 204.8 128.4 223.7 83.9 80 85 215.3 215.3 233.7 174.0 255.5 129.7 208.1 208.1 224.5 170.0 245.4 126.1 200.5 200.5 215.0 165.9 234.9 122.4 192.7 192.7 205.2 161.7 224.1 118.6 226.5 226.5 234.4 207.9 255.8 164.2 219.0 219.0 225.5 203.9 245.7 160.6 211.3 211.3 216.2 199.8 235.1 156.3 203.2 203.2 206.6 195.7 224.4 152.2 90 237.7 237.7 237.6 237.6 256.0 197.4 230.1 230.1 230.0 230.0 246.0 193.5 222.1 222.1 222.0 222.0 235.6 189.5 213.7 213.7 213.6 213.6 224.9 185.4 Note: All temperatures are in degrees Fahrenheit. Airflow is in cfm. Table PD-4 — Gross Cooling Capacities (kW) TWA200B Heat Pump with TWE200B Air Handler (SI) 29.4 Enter. Dry Bulb 3 16.1 19.4 35.0 22.8 16.1 19.4 AmbientTemperature (°C) Entering Wet Bulb (°C) 22.8 16.1 40.6 19.4 46.1 22.8 16.1 19.4 22.8 m /h (°C) 10194 24 59.5 47.4 65.5 39.4 71.9 26.5 57.2 46.3 63.0 38.4 69.2 25.5 54.8 45.0 60.3 37.3 66.3 24.5 52.3 43.8 57.6 36.2 63.3 23.5 27 29 59.7 61.2 55.4 65.6 45.3 71.9 34.7 61.2 65.6 53.1 72.0 42.8 57.5 59.3 54.3 63.1 44.2 69.2 33.7 55.2 53.1 60.5 43.1 66.3 32.6 52.8 51.9 57.7 41.8 63.4 31.6 59.3 63.1 52.0 69.2 41.7 57.3 57.3 60.5 50.8 66.4 40.6 55.2 55.2 57.9 49.6 63.5 39.5 32 64.2 64.2 65.9 61.0 72.0 50.7 62.2 62.2 63.5 59.9 69.3 49.7 60.2 60.2 61.0 58.7 66.4 48.4 58.0 58.0 58.5 57.6 63.5 47.3 24 60.6 49.6 66.6 38.5 73.0 27.0 58.2 48.4 64.0 37.4 70.2 26.0 55.7 47.2 61.3 36.3 67.2 25.0 53.2 45.9 58.6 35.2 64.2 23.9 27 29 61.0 63.2 58.4 66.7 47.3 73.0 35.9 63.2 66.8 55.8 73.1 44.6 58.7 61.1 57.2 64.1 46.1 70.2 34.8 56.4 56.0 61.4 44.9 67.3 33.8 53.9 53.9 58.6 43.7 64.3 32.7 61.1 64.2 54.6 70.3 43.6 59.0 59.0 61.6 53.4 67.4 42.5 56.8 56.8 58.9 52.2 64.4 41.4 32 66.2 66.2 67.3 64.5 73.1 53.1 64.2 64.2 64.8 63.4 70.4 52.0 62.0 62.0 62.4 62.2 67.5 50.9 59.7 59.7 59.7 59.7 64.5 49.7 11341 12488 13634 Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. Total Sens. 24 61.5 51.7 67.6 39.8 74.0 27.5 59.1 50.5 64.9 38.7 71.1 26.4 56.5 49.2 62.2 37.6 68.0 25.3 54.0 48.0 59.3 36.4 64.9 24.2 27 29 62.2 64.8 61.2 67.6 49.1 74.0 36.9 64.8 67.8 58.4 74.1 46.4 59.6 62.7 59.6 65.0 48.0 71.1 35.9 57.5 57.5 62.2 46.8 68.1 34.8 55.2 55.2 59.4 45.6 65.0 33.7 62.7 65.2 57.2 71.2 45.3 60.5 60.5 62.5 56.0 68.2 44.2 58.2 58.2 59.7 54.8 65.1 43.1 32 68.0 68.0 68.5 67.8 74.1 55.5 65.9 65.9 65.8 65.8 71.3 54.4 63.6 63.6 63.6 63.6 68.3 53.2 61.3 61.3 61.2 61.2 65.2 52.0 24 62.3 53.7 68.4 41.0 74.8 27.8 59.8 52.5 65.7 39.9 71.8 26.8 57.3 51.2 62.8 38.8 68.7 25.7 54.7 50.0 60.0 37.6 65.5 24.6 27 29 63.0 66.3 63.0 68.4 51.0 74.8 38.0 66.3 68.6 60.9 74.9 48.1 60.9 64.1 60.9 65.7 49.8 71.8 36.9 58.7 58.7 63.0 48.6 68.8 35.8 56.4 56.4 60.1 47.3 65.6 34.7 64.1 66.0 59.7 72.0 47.0 61.9 61.9 63.3 58.5 68.8 45.8 59.5 59.5 60.5 57.3 65.7 44.6 32 69.6 69.6 69.6 69.6 74.9 57.8 67.4 67.4 67.3 67.3 72.0 56.7 65.0 65.0 65.0 65.0 69.0 55.5 62.6 62.6 62.6 62.6 65.9 54.3 Note: All temperatures are in degrees Celsius. Airflow is in liters per second. SSP-PRC002-EN 15 Performance Data (TWA075A) Table PD-5 — Gross Cooling Performance (MBh) TWA075A Heat Pump Only (I-P) ODTemp Suction ReferenceTemperature °F °F 30 35 40 45 50 55 Head press PSIG 166 171 177 183 189 196 65 Cap. Btuh/1000 OD Unit KW 72.2 4.91 79.8 5.01 87.7 5.13 95.9 5.25 104.3 5.39 112.8 5.52 Head press PSIG 192 198 204 210 217 223 75 Cap. Btuh/1000 OD Unit KW 70.3 5.42 77.5 5.54 85.0 5.66 92.7 5.80 100.5 5.94 108.5 6.08 Head press PSIG 220 227 233 240 247 254 85 Cap. Btuh/1000 OD Unit KW 67.5 6.01 74.4 6.15 81.5 6.28 88.8 6.42 96.2 6.57 103.7 6.72 Head press PSIG Cap. Btuh/1000 251 64.1 258 70.7 265 77.4 272 84.2 279 91.2 286 98.3 OD Unit KW 6.71 6.84 6.98 7.12 7.27 7.42 Head press PSIG Cap. Btuh/1000 284 60.2 291 66.3 298 72.6 306 79.1 313 85.7 321 92.5 OD Unit KW 7.48 7.61 7.75 7.89 8.04 8.19 Head press PSIG Cap. Btuh/1000 320 55.9 327 61.6 334 67.5 342 73.5 350 79.8 358 86.2 OD Unit KW 8.32 8.45 8.59 8.72 8.87 9.02 95 105 115 Table PD-5 — Gross Cooling Performance (kW) TWA075A Heat Pump Only (SI) ODTemp Suction ReferenceTemperature °C °C 18.3 23.9 29.4 35.0 40.6 46.1 16 -1.1 1.7 4.4 7.2 10 12.8 Head pressure (kPA) 1142 1180 1220 1262 1305 1350 Capacity (kW) OD Unit Power (kW) 21.2 4.91 23.4 5.01 25.7 5.13 28.1 5.25 30.5 5.39 33.0 5.52 Head pressure (kPA) 1324 1364 1406 1449 1494 1541 Capacity (kW) OD Unit Power (kW) 20.6 5.42 22.7 5.54 24.9 5.66 27.1 5.80 29.4 5.94 31.8 6.08 Head pressure (kPA) Capacity (kW) 1519 19.8 1563 21.8 1607 23.9 1653 26.0 1701 28.2 1749 30.4 OD Unit Power (kW) 6.01 6.15 6.28 6.42 6.57 6.72 Head pressure (kPA) Capacity (kW) 1733 18.8 1778 20.7 1825 22.7 1873 24.7 1922 26.7 1973 28.8 OD Unit Power (kW) 6.71 6.84 6.98 7.12 7.27 7.42 Head pressure (kPA) Capacity (kW) 1961 17.6 2009 19.4 2057 21.3 2107 23.2 2159 25.1 2212 27.1 OD Unit Power (kW) 7.48 7.61 7.75 7.89 8.04 8.19 Head pressure (kPA) 2206 2255 2305 2357 2411 2467 Capacity (kW) OD Unit Power (kW) 16.4 8.32 18.0 8.45 19.8 8.59 21.5 8.72 23.4 8.87 25.2 9.02 SSP-PRC002-EN Performance Data (TWA100A) Table PD-6— Gross Cooling Performance (MBh) TWA100A Heat Pump Only (I-P) ODTemp Suction ReferenceTemperature °F °F 30 35 40 45 50 55 Head press PSIG 164 169 174 179 185 191 65 Cap. Btuh/1000 OD Unit KW 99.4 6.39 109.5 6.53 120.0 6.67 130.9 6.83 142.2 6.99 153.9 7.16 Head press PSIG 188 193 199 204 210 216 75 Cap. Btuh/1000 OD Unit KW 95.1 7.06 104.5 7.21 114.4 7.36 124.8 7.52 135.5 7.69 146.6 7.88 Head press PSIG 215 220 226 232 238 245 85 Cap. Btuh/1000 OD Unit KW 90.3 7.85 99.2 8.01 108.6 8.18 118.5 8.35 128.7 8.54 139.3 8.74 Head press PSIG Cap. Btuh/1000 245 85.2 250 93.7 256 102.7 263 112.1 269 121.8 276 131.8 OD Unit KW 8.79 8.95 9.13 9.32 9.51 9.71 Head press PSIG Cap. Btuh/1000 277 79.8 283 88.0 289 96.6 296 105.5 302 114.7 309 124.2 OD Unit KW 9.84 10.03 10.22 10.41 10.61 10.81 Head press PSIG Cap. Btuh/1000 312 74.2 318 82.1 325 90.3 331 98.8 338 107.6 346 116.4 OD Unit KW 11.02 11.22 11.42 11.63 11.83 12.02 95 105 115 Table PD-6 — Gross Cooling Performance (kW) TWA100A Heat Pump Only (SI) ODTemp Suction ReferenceTemperature °C °C 18.3 23.9 29.4 35.0 40.6 46.1 SSP-PRC002-EN -1.1 1.7 4.4 7.2 10 12.8 Head pressure (kPA) 1129 1163 1199 1237 1276 1316 Capacity (kW) OD Unit Power (kW) 29.1 6.39 32.1 6.53 35.1 6.67 38.3 6.83 41.6 6.99 45.1 7.16 Head pressure (kPA) 1299 1334 1370 1409 1449 1491 Capacity (kW) OD Unit Power (kW) 27.8 7.06 30.6 7.21 33.5 7.36 36.5 7.52 39.7 7.69 42.9 7.88 Head pressure (kPA) Capacity (kW) 1483 26.4 1520 29.1 1559 31.8 1600 34.7 1643 37.7 1688 40.8 OD Unit Power (kW) 7.85 8.01 8.18 8.35 8.54 8.74 Head pressure (kPA) Capacity (kW) 1688 25.0 1726 27.4 1767 30.1 1810 32.8 1855 35.7 1901 38.6 OD Unit Power (kW) 8.79 8.95 9.13 9.32 9.51 9.71 Head pressure (kPA) Capacity (kW) 1910 23.4 1950 25.8 1993 28.3 2038 30.9 2085 33.6 2133 36.4 OD Unit Power (kW) 9.84 10.03 10.22 10.41 10.61 10.81 Head pressure (kPA) 2149 2192 2238 2285 2333 2382 Capacity (kW) OD Unit Power (kW) 21.7 11.02 24.0 11.22 26.4 11.42 28.9 11.63 31.5 11.83 34.1 12.02 17 Performance Data (TWA155B) Table PD-7 — Gross Cooling Performance (MBh) TWA155B Heat Pump Only (I-P) ODTemp Suction ReferenceTemperature °F °F 30 Head press PSIG 35 40 45 50 55 165 170 176 182 188 194 142.4 9.59 157.4 9.80 173.0 10.02 189.2 10.26 205.9 10.52 222.8 10.78 65 Cap. Btuh/1000 OD Unit KW 75 Cap. Btuh/1000 OD Unit KW 219 225 232 238 245 252 85 Cap. Btuh/1000 OD Unit KW 133.3 11.75 147.0 12.01 161.1 12.27 175.6 12.54 190.3 12.82 205.3 13.11 Head press PSIG Cap. Btuh/1000 250 126.8 257 139.8 263 153.1 270 166.7 277 180.6 285 194.9 OD Unit KW 13.10 13.36 13.63 13.91 14.20 14.49 Head press PSIG Cap. Btuh/1000 283 119.1 290 131.3 297 143.9 304 156.7 312 169.9 319 183.4 OD Unit KW 14.61 14.87 15.14 15.41 15.70 16.00 Head press PSIG Cap. Btuh/1000 319 110.6 326 122.0 333 133.7 340 145.9 348 158.4 356 171.2 OD Unit KW 16.26 16.51 16.77 17.04 17.32 17.62 Head press PSIG Head press PSIG 95 105 115 191 197 203 209 215 222 138.7 10.58 153.0 10.82 167.9 11.06 183.1 11.32 198.7 11.59 214.6 11.87 Table PD-7 — Gross Cooling Performance (kW) TWA155B Heat Pump Only (SI) ODTemp Suction ReferenceTemperature °C °C 18.3 23.9 29.4 35.0 40.6 46.1 18 -1.1 1.7 4.4 7.2 10.0 12.8 Head pressure (kPA) 1136 1173 1213 1254 1297 1341 Capacity (kW) OD Unit Power (kW) 41.7 9.59 46.1 9.80 50.7 10.02 55.4 10.26 60.3 10.52 65.2 10.78 Head pressure (kPA) 1317 1356 1398 1441 1485 1531 Capacity (kW) OD Unit Power (kW) 40.6 10.58 44.8 10.82 49.1 11.06 53.6 11.32 58.2 11.59 62.8 11.87 Head pressure (kPA) Capacity (kW) 1512 39.0 1555 43.0 1599 47.2 1644 51.4 1691 55.7 1739 60.1 OD Unit Power (kW) 11.75 12.01 12.27 12.54 12.82 13.11 Head pressure (kPA) Capacity (kW) 1725 37.1 1770 40.9 1816 44.8 1863 48.8 1912 52.9 1963 57.1 OD Unit Power (kW) 13.10 13.36 13.63 13.91 14.20 14.49 Head pressure (kPA) Capacity (kW) 1953 34.9 2000 38.5 2048 42.1 2097 45.9 2149 49.8 2201 53.7 OD Unit Power (kW) 14.61 14.87 15.14 15.41 15.70 16.00 Head pressure (kPA) 2197 2246 2295 2347 2400 2456 Capacity (kW) OD Unit Power (kW) 32.4 16.26 35.7 16.51 39.2 16.77 42.7 17.04 46.4 17.32 50.1 17.62 SSP-PRC002-EN Performance Data (TWA200B) Table PD-8 — Gross Cooling Performance (MBh) TWA200B Heat Pump Only (I-P) ODTemp Suction ReferenceTemperature °F °F 30 Head press PSIG 35 40 45 50 55 173 179 185 191 198 205 196.4 12.94 215.5 13.25 235.3 13.58 255.8 13.93 276.9 14.30 298.5 14.69 65 Cap. Btuh/1000 OD Unit KW 75 Cap. Btuh/1000 OD Unit KW 226 233 240 247 254 262 85 Cap. Btuh/1000 OD Unit KW 177.5 15.95 194.5 16.32 212.3 16.71 230.8 17.12 249.9 17.56 269.5 18.01 Head press PSIG Cap. Btuh/1000 257 167.2 264 183.4 271 200.3 278 218.0 286 236.1 294 254.8 OD Unit KW 17.84 18.24 18.66 19.10 19.56 20.02 Head press PSIG Cap. Btuh/1000 290 156.3 298 171.9 305 188.1 313 205.0 321 222.3 330 239.9 OD Unit KW 19.96 20.40 20.86 21.33 21.80 22.27 Head press PSIG Cap. Btuh/1000 326 145.0 334 160.1 342 175.7 350 191.8 359 208.2 368 224.8 OD Unit KW 22.32 22.80 23.30 23.79 24.27 24.73 Head press PSIG Head press PSIG 95 105 115 198 204 211 217 224 232 187.3 14.32 205.2 14.65 223.9 15.00 243.3 15.38 263.4 15.79 284.0 16.22 Table PD-8 — Gross Cooling Performance (kW) TWA200B Heat Pump Only (SI) ODTemp Suction ReferenceTemperature °C °C 18.3 23.9 29.4 35.0 40.6 46.1 SSP-PRC002-EN -1.1 1.7 4.4 7.2 10.0 12.8 Head pressure (kPA) 1193 1232 1274 1318 1363 1411 Capacity (kW) OD Unit Power (kW) 57.5 12.94 63.1 13.25 68.9 13.58 74.9 13.93 81.1 14.30 87.4 14.69 Head pressure (kPA) 1368 1409 1453 1499 1547 1599 Capacity (kW) OD Unit Power (kW) 54.8 14.32 60.1 14.65 65.5 15.00 71.2 15.38 77.1 15.79 83.2 16.22 Head pressure (kPA) Capacity (kW) 1561 52.0 1605 56.9 1652 62.2 1701 67.6 1752 73.2 1805 78.9 OD Unit Power (kW) 15.95 16.32 16.71 17.12 17.56 18.01 Head pressure (kPA) Capacity (kW) 1773 48.9 1819 53.7 1869 58.7 1920 63.8 1974 69.1 2030 74.6 OD Unit Power (kW) 17.84 18.24 18.66 19.10 19.56 20.02 Head pressure (kPA) Capacity (kW) 2001 45.8 2051 50.3 2104 55.1 2159 60.0 2215 65.1 2273 70.2 OD Unit Power (kW) 19.96 20.40 20.86 21.33 21.80 22.27 Head pressure (kPA) 2248 2302 2358 2416 2475 2536 Capacity (kW) OD Unit Power (kW) 42.5 22.32 46.9 22.80 51.5 23.30 56.2 23.79 61.0 24.27 65.8 24.73 19 Performance Data (System) Table PD-9 — Gross Heating Capacities (MBh) TWA075A Heat Pump with TWE075A Air Handler At 2500 CFM (I-P) Outdoor Heating Capacity (Btu/1000) At Total Power in Kilowatts At Temperature (°F) Indicated Indoor Dry BulbTemperature 60 70 75 80 Indicated Indoor Dry BulbTemperature 60 70 75 80 -18 -13 -8 -3 2 7 12 17 22 27 32 37 42 47 52 57 62 67 72 33.0 34.1 35.6 37.5 40.0 42.8 46.2 50.0 54.4 59.2 64.5 69.9 75.7 81.8 88.3 95.1 102.0 109.0 116.3 28.7 30.4 32.4 34.8 37.7 41.1 44.9 49.1 53.6 58.6 63.9 69.4 75.1 81.1 87.4 93.9 100.6 107.4 114.5 27.1 29.0 31.2 33.9 37.0 40.5 44.4 48.7 53.4 58.4 63.7 69.1 74.7 80.6 86.8 93.2 99.8 106.5 113.4 25.9 27.9 30.3 33.2 36.4 40.1 44.2 48.5 53.2 58.2 63.5 68.8 74.3 80.1 86.2 92.4 98.9 105.5 112.3 5.6 5.5 5.5 5.5 5.5 5.6 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.4 6.5 6.7 6.8 7.0 7.2 5.7 5.7 5.8 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.6 6.7 6.9 7.0 7.2 7.4 7.5 7.7 7.9 5.9 5.9 5.9 6.0 6.1 6.2 6.3 6.5 6.6 6.8 6.9 7.1 7.2 7.4 7.6 7.7 7.9 8.1 8.2 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.8 7.0 7.1 7.3 7.5 7.6 7.8 8.0 8.1 8.3 8.5 8.6 Table PD-9 — Gross Heating Capacities (kW) TWA075A Heat Pump with TWE075A Air Handler At 4247 m3/h (SI) Outdoor Heating Capacity (kW) At Total Power in Kilowatts At Temperature (°C) Indicated Indoor Dry BulbTemperature 15.6 21.1 23.9 26.7 Indicated Indoor Dry BulbTemperature 15.6 21.1 23.9 26.7 -27.8 -25.0 -22.2 -19.4 -16.7 -13.9 -11.1 -8.3 -5.6 -2.8 0.0 2.8 5.6 8.3 11.1 13.9 16.7 19.4 22.2 9.7 10.0 10.4 11.0 11.7 12.5 13.5 14.7 15.9 17.3 18.9 20.5 22.2 24.0 25.9 27.8 29.9 31.9 34.1 8.4 8.9 9.5 10.2 11.0 12.0 13.1 14.4 15.7 17.2 18.7 20.3 22.0 23.7 25.6 27.5 29.5 31.5 33.5 7.9 8.5 9.1 9.9 10.8 11.9 13.0 14.3 15.6 17.1 18.7 20.2 21.9 23.6 25.4 27.3 29.2 31.2 33.2 Correction Factors - Other Airflows (Table Value x Correction Factor = Value at new airflow) Airflow Heating Capacity Compressor kW 2250 cfm 3822 m3/h x 0.99 x 1.02 2750 cfm 4672 m3/h x 1.01 x 0.98 Values at ARI Rating Conditions of: 70F (21.1C) and 47/43F (8.3/6.1C)(High Temp.Cond.) 70F (21.1C) and 17/15F (-8.3/-9.4C)(Low Temp. Cond) 20 7.6 8.2 8.9 9.7 10.7 11.7 12.9 14.2 15.6 17.0 18.6 20.1 21.8 23.4 25.2 27.1 29.0 30.9 32.9 5.5 5.6 5.7 5.8 5.9 6.0 6.2 6.3 6.5 6.6 6.8 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.4 6.0 6.1 6.2 6.3 6.5 6.6 6.7 6.9 7.0 7.2 7.4 7.6 7.8 8.0 8.2 8.4 8.7 8.9 9.2 6.2 6.3 6.5 6.6 6.7 6.9 7.0 7.2 7.4 7.5 7.7 7.9 8.1 8.4 8.6 8.8 9.1 9.3 9.6 6.5 6.6 6.7 6.9 7.0 7.2 7.4 7.5 7.7 7.9 8.1 8.3 8.5 8.8 9.0 9.2 9.5 9.8 10.0 Airflow = 2500 cfm (4247 m3/h) Heating Capacity (High Temp.) = 81,000 (23.72) Heating Capacity (Low Temp.) = 49,000 (14.35) Compressor Power (High Temp) = 5.67 kW Compressor Power (Low Temp) = 4.80 kW Coeff. Of Perf. (High Temp) = 3.4 Coeff. Of Perf. (Low Temp) = 2.3 Outdoor Fan Power = 550 watts Indoor Fan Power = 800 watts Note: 1. Rated with 25 feet of 1-3/8" suction and 1/2" liquid line. SSP-PRC002-EN Performance Data (System) Table PD-10 — Gross Heating Capacities (MBh) TWA100A Heat Pump with TWE100A Air Handler At 3325 CFM (I-P) Outdoor Heating Capacity (Btu/1000) At Total Power in Kilowatts At Temperature (°F) Indicated Indoor Dry BulbTemperature 60 70 75 80 Indicated Indoor Dry BulbTemperature 60 70 75 80 -18 -13 -8 -3 2 7 12 17 22 27 32 37 42 47 52 57 62 67 72 20.4 31.4 39.0 45.5 51.8 57.9 64.1 70.4 76.9 83.6 90.7 97.6 104.6 112.0 119.5 127.1 134.8 142.6 150.7 37.3 41.8 46.3 50.8 55.6 60.6 65.8 71.3 77.1 83.3 89.7 96.2 102.9 109.9 117.2 124.6 132.1 139.7 147.5 41.2 44.6 48.4 52.4 56.7 61.3 66.2 71.4 77.0 82.9 89.2 95.5 102.1 109.0 116.2 123.5 130.8 138.3 146.1 43.6 46.4 49.7 53.3 57.3 61.6 66.3 71.3 76.7 82.5 88.7 94.9 101.4 108.2 115.2 122.5 129.7 137.2 144.8 5.7 6.2 6.5 6.8 7.0 7.2 7.3 7.5 7.6 7.8 7.9 8.1 8.2 8.4 8.6 8.8 9.0 9.2 9.4 7.3 7.5 7.6 7.8 7.9 8.0 8.2 8.3 8.4 8.6 8.8 8.9 9.1 9.3 9.5 9.7 9.9 10.1 10.4 7.9 8.0 8.1 8.2 8.4 8.5 8.6 8.7 8.9 9.0 9.2 9.4 9.6 9.7 10.0 10.2 10.4 10.7 10.9 8.5 8.6 8.6 8.7 8.8 9.0 9.1 9.2 9.4 9.5 9.7 9.9 10.1 10.3 10.5 10.7 11.0 11.2 11.5 Table PD-10 — Gross Heating Capacities (kW) TWA100A Heat Pump with TWE100A Air Handler At 5649 m3/h (SI) Outdoor Heating Capacity (kW) At Total Power in Kilowatts At Temperature (°C) Indicated Indoor Dry BulbTemperature 15.6 21.1 23.9 26.7 Indicated Indoor Dry BulbTemperature 15.6 21.1 23.9 26.7 -27.8 -25.0 -22.2 -19.4 -16.7 -13.9 -11.1 -8.3 -5.6 -2.8 0.0 2.8 5.6 8.3 11.1 13.9 16.7 19.4 22.2 6.0 9.2 11.4 13.3 15.2 17.0 18.8 20.6 22.5 24.5 26.5 28.6 30.6 32.8 35.0 37.2 39.5 41.7 44.1 10.9 12.2 13.5 14.9 16.3 17.7 19.3 20.9 22.6 24.4 26.3 28.2 30.1 32.2 34.3 36.5 38.7 40.9 43.2 12.1 13.1 14.2 15.3 16.6 17.9 19.4 20.9 22.5 24.3 26.1 28.0 29.9 31.9 34.0 36.2 38.3 40.5 42.8 Correction Factors - Other Airflows (Table Value x Correction Factor = Value at new airflow) Airflow Heating Capacity Compressor kW 3000 cfm 5097 m3/h x 0.99 x 1.02 3675 cfm 6243 m3/h x 1.01 x 0.98 Values at ARI Rating Conditions of: 70F (21.1C) and 47/43F (8.3/6.1C)(High Temp.Cond.) 70F (21.1C) and 17/15F (-8.3/-9.4C)(Low Temp. Cond) SSP-PRC002-EN 12.8 13.6 14.6 15.6 16.8 18.0 19.4 20.9 22.5 24.1 26.0 27.8 29.7 31.7 33.7 35.9 38.0 40.2 42.4 5.5 5.6 5.7 5.8 5.9 6.0 6.2 6.3 6.5 6.6 6.8 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.4 6.0 6.1 6.2 6.3 6.5 6.6 6.7 6.9 7.0 7.2 7.4 7.6 7.8 8.0 8.2 8.4 8.7 8.9 9.2 6.2 6.3 6.5 6.6 6.7 6.9 7.0 7.2 7.4 7.5 7.7 7.9 8.1 8.4 8.6 8.8 9.1 9.3 9.6 6.5 6.6 6.7 6.9 7.0 7.2 7.4 7.5 7.7 7.9 8.1 8.3 8.5 8.8 9.0 9.2 9.5 9.8 10.0 Airflow = 3325 cfm (5649 m3/h) Heating Capacity (High Temp.) = 110,000 (32.21) Heating Capacity (Low Temp.) = 71,000 (20.79) Compressor Power (High Temp) = 7.59 kW Compressor Power (Low Temp) = 6.60 kW Coeff. Of Perf. (High Temp) = 3.4 Coeff. Of Perf. (Low Temp) = 2.4 Outdoor Fan Power = 615 watts Indoor Fan Power = 1,030 watts Note: 1. Rated with 25 feet of 1-3/8" suction and 1/2" liquid line. 21 Performance Data (System) Table PD-11 — Gross Heating Capacities (MBh) TWA155B Heat Pump with TWE155B Air Handler At 5000 CFM (I-P) Outdoor Heating Capacity (BTUH/1000) At Total Power in Kilowatts At Temperature (°F) Indicated Indoor Dry BulbTemperature 60 70 75 80 Indicated Indoor Dry BulbTemperature 60 70 75 80 -18 -13 -8 -3 2 7 12 17 22 27 32 37 42 47 52 57 62 67 72 68.8 71.2 74.3 78.2 83.0 88.7 95.5 103.3 112.1 121.8 132.5 143.4 154.8 167.0 179.9 193.3 207.2 221.3 235.8 60.9 64.2 68.2 73.2 79.0 85.7 93.2 101.6 110.9 120.9 131.7 142.6 153.9 165.7 178.2 191.2 204.5 218.2 232.2 58.1 61.7 66.2 71.6 77.8 84.8 92.6 101.2 110.6 120.7 131.4 142.2 153.3 165.0 177.2 189.9 203.0 216.4 230.3 55.9 59.9 64.7 70.5 77.0 84.4 92.4 101.1 110.6 120.6 131.2 141.8 152.7 164.1 176.1 188.6 201.4 214.5 228.2 11.9 11.9 11.9 11.9 11.9 12.0 12.2 12.3 12.5 12.8 13.1 13.3 13.6 14.0 14.3 14.6 15.0 15.3 15.7 12.3 12.3 12.4 12.5 12.7 12.9 13.1 13.4 13.6 14.0 14.3 14.7 15.0 15.4 15.7 16.1 16.4 16.8 17.2 12.5 12.6 12.7 12.9 13.1 13.4 13.7 14.0 14.3 14.7 15.0 15.4 15.8 16.1 16.5 16.9 17.2 17.6 18.0 12.8 12.9 13.2 13.4 13.7 14.0 14.3 14.7 15.1 15.5 15.8 16.2 16.6 17.0 17.3 17.7 18.0 18.4 18.8 Table PD-11 — Gross Heating Capacities (kW) TWA155B Heat Pump with TWE155B Air Handler At 8494 m3/h (SI) Outdoor Heating Capacity (kW) At Total Power in Kilowatts At Temperature (°C) Indicated Indoor Dry BulbTemperature 15.6 21.1 23.9 26.7 Indicated Indoor Dry BulbTemperature 15.6 21.1 23.9 26.7 -27.8 -25.0 -22.2 -19.4 -16.7 -13.9 -11.1 -8.3 -5.6 -2.8 0.0 2.8 5.6 8.3 11.1 13.9 16.7 19.4 22.2 20.1 20.9 21.8 22.9 24.3 26.0 28.0 30.2 32.8 35.7 38.8 42.0 45.3 48.9 52.7 56.6 60.7 64.8 69.0 17.8 18.8 20.0 21.4 23.1 25.1 27.3 29.8 32.5 35.4 38.6 41.7 45.0 48.5 52.2 56.0 59.9 63.9 68.0 17.0 18.1 19.4 21.0 22.8 24.8 27.1 29.6 32.4 35.3 38.5 41.6 44.9 48.3 51.9 55.6 59.4 63.4 67.4 Correction Factors - Other Airflows“(Table Value Correction Factor = Value at new airflow) Airflow 4500 cfm 5500 cfm 7645 m3/h 9344 m3/h Heating Capacity Compressor kW x 0.99 x 1.02 x 1.01 x 0.98 Values at ARI Rating Conditions of: 70F (21.1C) and 47/43F (8.3/6.1C)(High Temp.Cond.) 70F (21.1C) and 17/15F (-8.3/-9.4C)(Low Temp. Cond) 22 16.4 17.5 19.0 20.6 22.6 24.7 27.0 29.6 32.4 35.3 38.4 41.5 44.7 48.1 51.6 55.2 59.0 62.8 66.8 5.5 5.6 5.7 5.8 5.9 6.0 6.2 6.3 6.5 6.6 6.8 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.4 6.0 6.1 6.2 6.3 6.5 6.6 6.7 6.9 7.0 7.2 7.4 7.6 7.8 8.0 8.2 8.4 8.7 8.9 9.2 6.2 6.3 6.5 6.6 6.7 6.9 7.0 7.2 7.4 7.5 7.7 7.9 8.1 8.4 8.6 8.8 9.1 9.3 9.6 6.5 6.6 6.7 6.9 7.0 7.2 7.4 7.5 7.7 7.9 8.1 8.3 8.5 8.8 9.0 9.2 9.5 9.8 10.0 Airflow = 5000 cfm (8495 m3/h) Heating Capacity (High Temp.) = 166,000 (48.60) Heating Capacity (Low Temp.) = 101,000 (29.57) Compressor Power (High Temp) = 11.67 kW Compressor Power (Low Temp) = 9.66 kW Coeff. Of Perf. (High Temp) = 3.2 Coeff. Of Perf. (Low Temp) = 2.2 Outdoor Fan Power = 1100 watts Indoor Fan Power = 2570 watts Note: 1.Rated with 25 feet of 1-3/8"" suction and 1/2"" liquid line." SSP-PRC002-EN Performance Data (System) Table PD-12 — Gross Heating Capacities (MBh) TWA200B Heat Pump with TWE200B Air Handler At 6675 CFM (I-P) Outdoor Heating Capacity (BTUH/1000) At Total Power in Kilowatts At Temperature (°F) Indicated Indoor Dry BulbTemperature 60 70 75 80 Indicated Indoor Dry BulbTemperature 60 70 75 80 -18 -13 -8 -3 2 7 12 17 22 27 32 37 42 47 52 57 62 67 72 42.4 68.2 81.5 93.1 104.2 115.2 126.6 138.2 150.3 162.9 176.1 189.2 202.8 216.9 231.9 247.4 263.2 279.3 295.9 79.1 86.2 93.8 101.8 110.2 119.2 128.8 139.1 150.1 161.8 174.3 186.9 200.0 213.8 228.5 243.6 259.1 274.8 291.1 84.7 90.2 96.7 103.7 111.4 119.8 128.9 138.8 149.5 160.9 173.2 185.6 198.6 212.3 226.8 241.9 257.2 272.8 289.0 87.4 92.3 98.0 104.5 111.7 119.7 128.5 138.2 148.6 159.8 171.9 184.3 197.2 210.8 225.3 240.3 255.6 271.0 287.0 11.5 13.0 13.6 14.1 14.5 14.9 15.2 15.5 15.9 16.2 16.5 16.9 17.2 17.6 18.0 18.4 18.9 19.4 20.0 15.4 15.6 15.9 16.2 16.4 16.7 17.0 17.3 17.6 18.0 18.3 18.7 19.1 19.5 20.0 20.5 21.0 21.6 22.2 16.6 16.7 16.9 17.1 17.4 17.6 17.9 18.2 18.6 18.9 19.3 19.7 20.2 20.6 21.1 21.7 22.2 22.8 23.4 17.6 17.7 17.9 18.1 18.3 18.6 18.9 19.2 19.6 20.0 20.4 20.8 21.3 21.8 22.3 22.9 23.5 24.1 24.7 Table PD-12 — Gross Heating Capacities (kW) TWA200B Heat Pump with TWE200B Air Handler At 11340 m3/h (SI) Outdoor Heating Capacity (kW) At Total Power in Kilowatts At Temperature (°C) Indicated Indoor Dry BulbTemperature 15.6 21.1 23.9 26.7 Indicated Indoor Dry BulbTemperature 15.6 21.1 23.9 26.7 -27.8 -25.0 -22.2 -19.4 -16.7 -13.9 -11.1 -8.3 -5.6 -2.8 0.0 2.8 5.6 8.3 11.1 13.9 16.7 19.4 22.2 12.4 20.0 23.9 27.2 30.5 33.7 37.1 40.5 44.0 47.7 51.6 55.4 59.4 63.5 67.9 72.4 77.1 81.8 86.6 23.2 25.3 27.5 29.8 32.3 34.9 37.7 40.7 43.9 47.4 51.0 54.7 58.6 62.6 66.9 71.3 75.9 80.5 85.2 24.8 26.4 28.3 30.4 32.6 35.1 37.8 40.7 43.8 47.1 50.7 54.3 58.1 62.2 66.4 70.8 75.3 79.9 84.6 Correction Factors - Other Airflows (Table Value x Correction Factor = Value at new airflow) Airflow 6000 cfm 7325 cfm 10194 m3/h 12445 m3/h Heating Capacity x 0.99 x 1.01 Compressor kW x 1.02 x 0.98 Values at ARI Rating Conditions of: 70F (21.1C) and 47/43F (8.3/6.1C)(High Temp.Cond.) 70F (21.1C) and 17/15F (-8.3/-9.4C)(Low Temp. Cond) 25.6 27.0 28.7 30.6 32.7 35.1 37.6 40.5 43.5 46.8 50.3 54.0 57.7 61.7 66.0 70.3 74.8 79.4 84.0 5.5 5.6 5.7 5.8 5.9 6.0 6.2 6.3 6.5 6.6 6.8 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.4 6.0 6.1 6.2 6.3 6.5 6.6 6.7 6.9 7.0 7.2 7.4 7.6 7.8 8.0 8.2 8.4 8.7 8.9 9.2 6.2 6.3 6.5 6.6 6.7 6.9 7.0 7.2 7.4 7.5 7.7 7.9 8.1 8.4 8.6 8.8 9.1 9.3 9.6 6.5 6.6 6.7 6.9 7.0 7.2 7.4 7.5 7.7 7.9 8.1 8.3 8.5 8.8 9.0 9.2 9.5 9.8 10.0 Airflow = 6700 cfm (11383 m3/h) Heating Capacity (High Temp.) = 214,000 (62.66) Heating Capacity (Low Temp.) = 139,000 (40.70) Compressor Power (High Temp) = 15.83 kW Compressor Power (Low Temp) = 13.50 kW Coeff. Of Perf. (High Temp) = 3.2 Coeff. Of Perf. (Low Temp) = 2.3 Outdoor Fan Power = 1,200 watts Indoor Fan Power = 2,300 watts Note: 1. Rated with 25 feet of 1-3/8” suction and 1/2" liquid line." SSP-PRC002-EN 23 Performance Data (Air Handler) Table PD-13 — Evaporator Fan Performance — TWE050A (I-P) External Static Pressure (Inches of Water Column) CFM .10" .20" .30" .40" .50" .60" .70" .80" .90" 1.00" 1.10" RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 1400 — — — — 646 0.37 698 0.42 751 1500 — — 607 0.36 661 0.40 713 0.45 764 1600 — — 625 0.38 676 0.43 727 0.48 778 1700 601 0.35 648 0.40 696 0.44 744 0.49 792 1800 625 0.36 671 0.41 716 0.46 762 0.51 807 1900 642 0.40 687 0.45 731 0.50 776 0.55 820 2000 659 0.44 703 0.49 745 0.54 790 0.60 833 2100 674 0.48 722 0.54 770 0.60 817 0.65 857 0.75 HP Standard Motor and Standard Static Drive 0.47 803 0.52 856 0.56 908 0.61 941 0.65 0.50 816 0.54 867 0.59 919 0.64 952 0.67 0.52 828 0.57 879 0.62 930 0.67 963 0.70 0.54 841 0.59 889 0.64 937 0.69 971 0.73 0.56 853 0.61 898 0.66 944 0.71 979 0.76 0.60 865 0.66 909 0.71 951 0.75 987 0.80 0.65 877 0.70 920 0.75 957 0.80 994 0.84 0.70 897 0.75 936 0.80 973 0.85 1009 0.89 1.0 HP Oversized Motor and High Static Drive 973 984 995 1005 — — — — 0.68 1006 0.71 0.71 — — 0.74 — — 0.77 — — — — — — — — — — — — — — Notes: 1. Performance based on a wet coil and 1 inch (25.4 mm) throwaway filters. 2. Tabulated brake horsepower is the motor shaft output required. 3. Factory setting of motor sheave is 1.5 turns open. Adjustments are made in 0.5 turn increments. Table PD-13— Evaporator Fan Performance — TWE050A (SI) External Static Pressure (Pascal) m3/hr 25 50 75 100 125 150 174 199 224 249 274 RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW 2379 — — — — 646 0.28 698 0.31 751 0.35 803 0.39 856 0.42 908 0.45 941 0.48 2549 — — 607 0.27 661 0.30 713 0.34 764 0.37 816 0.40 867 0.44 919 0.48 952 0.50 2718 — — 625 0.28 676 0.32 727 0.36 778 0.39 828 0.43 879 0.46 930 0.50 963 0.52 2888 601 0.26 648 0.30 696 0.33 744 0.37 792 0.40 841 0.44 889 0.48 937 0.51 971 0.54 3058 625 0.27 671 0.31 716 0.34 762 0.38 807 0.42 853 0.45 898 0.49 944 0.53 979 0.57 3228 642 0.30 687 0.34 731 0.37 776 0.41 820 0.45 865 0.49 909 0.53 951 0.56 987 0.60 3398 659 0.33 703 0.37 745 0.40 790 0.45 833 0.48 877 0.52 920 0.56 957 0.60 994 0.63 3568 674 0.36 722 0.40 770 0.45 817 0.48 857 0.52 897 0.56 936 0.60 973 0.63 1009 0.66 0.56 kW Standard Motor and Standard Static Drive 0.75 kW Oversized Motor and High Static Drive 973 984 995 1005 — — — — 0.51 1006 0.53 0.53 — — 0.55 — — 0.57 — — — — — — — — — — — — — — Notes: 1. Performance based on a wet coil and 1 inch (25.4 mm) throwaway filters. 2. Tabulated brake horsepower is the motor shaft output required. 3. Factory setting of motor sheave is 1.5 turns open. Adjustments are made in 0.5 turn increments. Table PD-14 — Blower Speeds — TWE050A Drive Standard High Static 24 6 N/A N/A 5 590 713 Motor DriveTurns Open 4 3 2 639 688 737 772 832 891 1 786 951 0 835 1009 SSP-PRC002-EN Performance Data (Air Handler) Table PD-15 — Evaporator Fan Performance TWE075A (I-P) External Static Pressure (In. Of Water Column) 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP CFM 2000 2125 2250 2375 2500 2625 2750 2875 3000 — — 443 0.44 489 — — 453 0.46 499 — — 463 0.49 510 — — 473 0.51 520 445 0.47 489 0.54 533 464 0.50 506 0.57 548 484 0.53 523 0.59 562 504 0.56 540 0.62 576 524 0.59 557 0.65 590 1.0 HP Standard Motor and Low Static Drive 0.49 0.52 0.55 0.57 0.60 0.63 0.66 0.68 0.71 535 546 556 567 578 589 601 612 624 0.54 0.57 0.61 0.64 0.67 0.69 0.72 0.74 0.77 581 592 602 613 622 631 640 648 657 Notes: 1. Performance based on a wet coil and 1 inch (25.4 mm) throwaway filters. 2. Tabulated brake horsepower is the motor shaft output required. 3. Factory setting of motor sheave is 1.5 turns open. Adjustments are made in 0.5 turn increments. 0.59 627 0.64 673 0.69 0.63 638 0.68 684 0.74 0.67 649 0.73 695 0.79 0.70 660 0.77 706 0.83 0.73 667 0.80 711 0.86 0.76 672 0.82 714 0.88 0.78 678 0.84 717 0.91 0.81 684 0.87 720 0.93 0.83 690 0.89 723 0.95 1.0 HP Standard Motor and Drive 719 730 742 753 756 757 758 759 760 0.74 0.79 0.85 0.90 0.93 0.95 0.97 0.99 1.01 765 771 776 782 784 786 787 789 790 0.79 791 0.83 818 0.89 0.85 798 0.90 825 0.96 0.91 804 0.97 831 1.03 0.97 810 1.03 838 1.10 0.99 813 1.07 842 1.14 1.01 815 1.09 844 1.17 1.03 817 1.12 847 1.21 1.05 819 1.15 850 1.24 1.07 821 1.17 853 1.27 1.5 HP Oversized Motor and High Static Drive Table PD-15— Continued External Static Pressure (In. Of Water Column) CFM 2000 2125 2250 2375 2500 2625 2750 2875 3000 1.20 1.30 1.40 1.50 1.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 844 0.96 871 1.02 897 1.09 852 1.03 879 1.09 906 1.16 859 1.10 886 1.17 914 1.23 866 1.17 894 1.24 922 1.30 870 1.21 899 1.29 928 1.36 874 1.25 903 1.33 932 1.42 877 1.29 907 1.38 937 1.47 880 1.33 911 1.43 942 1.52 884 1.37 915 1.48 946 1.58 1.5 HP Oversized Motor and High Static Drive 924 933 942 950 — — — — — 1.15 950 1.21 1.22 — — 1.30 — — 1.37 — — — — — — — — — — — — — — — — — 1.0 HP Standard Motor and Drive Table PD-15 — Evaporator Fan Performance TWE075A (SI) External Static Pressure (Pascal) m3/hr 3338 3547 3755 3964 4173 4381 4590 4798 5007 25 50 75 100 125 150 174 199 224 249 274 RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW — — 443 0.33 489 0.37 — — 453 0.34 499 0.39 — — 463 0.37 510 0.41 — — 473 0.38 520 0.43 445 0.35 489 0.4 533 0.45 464 0.37 506 0.43 548 0.47 484 0.4 523 0.44 562 0.49 504 0.42 540 0.46 576 0.51 524 0.44 557 0.48 590 0.53 .75 kW Standard Motor and Low Static Drive 535 546 556 567 578 589 601 612 624 0.4 0.43 0.45 0.48 0.5 0.51 0.54 0.55 0.57 Notes: 1. Performance based on a wet coil and 1 inch (25.4 mm) throwaway filters. 2. Tabulated brake horsepower is the motor shaft output required. 3. Factory setting of motor sheave is 1.5 turns open. Adjustments are made in 0.5 turn increments. Table PD-16 — Blower Speeds — TWE075A Motor DriveTurns Open Drive Standard Low Static High Static 6 5 4 3 2 1 0 N/A N/A N/A 600 428 700 650 464 750 700 499 800 750 535 850 800 571 900 850 606 950 581 592 602 613 622 631 640 648 657 0.44 627 0.48 673 0.51 0.47 638 0.51 684 0.55 0.5 649 0.54 695 0.59 0.52 660 0.57 706 0.62 0.54 667 0.6 711 0.64 0.57 672 0.61 714 0.66 0.58 678 0.63 717 0.68 0.6 684 0.65 720 0.69 0.62 690 0.66 723 0.71 .75 kW Standard Motor and Drive 0.55 0.59 0.63 0.67 0.69 0.71 0.72 0.74 0.75 765 0.59 791 0.62 818 0.66 771 0.63 798 0.67 825 0.72 776 0.68 804 0.72 831 0.77 782 0.72 810 0.77 838 0.82 784 0.74 813 0.8 842 0.85 786 0.75 815 0.81 844 0.87 787 0.77 817 0.84 847 0.9 789 0.78 819 0.86 850 0.92 790 0.8 821 0.87 853 0.95 1.12 kW Oversized Motor and High Static Drive Table PD-15 — Continued External Static Pressure (Pascal) m3/hr 299 324 349 374 398 RPM kW RPM kW RPM kW RPM kW RPM kW 3338 844 0.72 871 0.76 897 0.81 924 0.86 950 3547 852 0.77 879 0.81 906 0.87 933 0.91 — 3755 859 0.82 886 0.87 914 0.92 942 0.97 — 3964 866 0.87 894 0.92 922 0.97 950 1.02 — 4173 870 0.9 899 0.96 928 1.01 — — — 4381 874 0.93 903 0.99 932 1.06 — — — 4590 877 0.96 907 1.03 937 1.1 — — — 4798 880 0.99 911 1.07 942 1.13 — — — 5007 884 1.02 915 1.1 946 1.18 — — — 1.12 kW Oversized Motor and High Static Drive .75 kW Standard Motor and Drive SSP-PRC002-EN 719 730 742 753 756 757 758 759 760 0.9 — — — — — — — — 25 Performance Data (Air Handler) Table PD-17 — Evaporator Fan Performance TWE100A, TWE100B (I-P) External Static Pressure (In. Of Water Column) 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP CFM 2600 2775 2950 3125 3300 3475 3650 3825 4000 1.5 HP Standard Motor and Low Static Drive 460 0.32 493 0.39 527 0.47 565 0.55 603 0.63 641 0.71 679 0.79 473 0.37 506 0.45 540 0.53 576 0.61 613 0.69 649 0.77 686 0.85 487 0.43 519 0.50 552 0.58 587 0.67 623 0.75 658 0.83 693 0.91 501 0.49 532 0.56 565 0.64 599 0.72 632 0.81 666 0.89 700 0.97 520 0.58 548 0.65 581 0.73 613 0.81 644 0.89 677 0.98 710 1.06 541 0.69 568 0.76 600 0.84 631 0.93 658 1.00 691 1.08 721 1.16 562 0.82 588 0.88 618 0.97 648 1.05 671 1.11 703 1.19 732 1.27 582 0.96 608 1.03 637 1.11 666 1.20 685 1.26 711 1.31 739 1.38 602 1.11 628 1.17 656 1.26 683 1.35 698 1.40 720 1.43 747 1.50 1.5 HP Standard Motor and Drive Notes: 1. Performance based on a wet coil and 1 inch (25.4 mm) throwaway filters. 2. Tabulated brake horsepower is the motor shaft output required. 3. Factory setting of motor sheave is 1.5 turns open. Adjustments are made in 0.5 turn increments. 4. Low Static Drive must be field supplied. 717 723 728 734 740 746 753 763 773 0.87 0.93 0.99 1.05 1.13 1.21 1.31 1.44 1.58 744 748 751 755 759 764 772 787 801 0.94 772 1.01 826 1.16 1.00 775 1.07 830 1.20 1.06 779 1.12 833 1.25 1.11 783 1.18 737 1.30 1.19 787 1.25 841 1.37 1.28 793 1.34 846 1.48 1.38 801 1.45 853 1.59 1.51 815 1.58 862 1.74 1.64 829 1.71 872 1.89 2.0 HP Oversized Motor and High Static Drive Table PD-17— Continued External Static Pressure (In. Of Water Column) 1.40 1.60 RPM BHP RPM BHP CFM 2.0 HP Oversized Motor and High Static Drive 2600 881 1.30 936 1.45 2775 884 1.36 938 1.51 2960 886 1.41 939 1.57 3125 889 1.47 941 1.64 3300 892 1.54 945 1.73 3475 897 1.63 950 1.85 3650 902 1.73 955 1.99 3825 912 1.89 960 2.18 4000 922 2.04 965 2.30 Table PD-17— Evaporator Fan Performance TWE100A, TWE100B (SI) External Static Pressure (Pascal) m3/hr 1.12 4417 4715 5012 5309 5607 5904 6201 6499 6796 25 50 75 100 125 150 174 199 224 249 299 RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW kW Standard Motor and Low Static Drive 460 0.24 493 0.29 527 0.35 565 0.41 603 0.47 641 0.53 679 473 0.28 506 0.34 540 0.4 576 0.45 613 0.51 649 0.57 686 487 0.32 519 0.37 552 0.43 587 0.5 623 0.56 658 0.62 693 501 0.37 532 0.42 565 0.48 599 0.54 632 0.6 666 0.66 700 520 0.43 548 0.48 581 0.54 613 0.6 644 0.66 677 0.73 710 541 0.51 568 0.57 600 0.63 631 0.69 658 0.75 691 0.8 721 562 0.61 588 0.66 618 0.72 648 0.78 671 0.83 703 0.89 732 582 0.72 608 0.77 637 0.83 666 0.89 685 0.94 711 0.98 739 602 0.83 628 0.87 656 0.94 683 1.01 698 1.04 720 1.07 747 1.12 kW Standard Motor and Drive Notes: 1. Performance based on a wet coil and 1 inch (25.4 mm) throwaway filters. 2. Tabulated brake horsepower is the motor shaft output required. 3. Factory setting of motor sheave is 3.0 turns open. Adjustments are made in 0.5 turn increments. 4. Low Static Drive must be field supplied. Table PD - 18 — Blower Speeds — TWE100A, TWE100B Motor SheaveTurns Open Drive Standard Low Static High Static High Static II 26 6 5 4 3 2 1 0 N/A N/A N/A N/A 587 453 606 745 629 485 641 789 671 518 677 833 713 550 713 877 755 583 748 920 796 615 784 965 0.59 0.63 0.68 0.72 0.79 0.87 0.95 1.03 1.12 717 723 728 734 740 746 753 763 773 0.65 0.69 0.74 0.78 0.84 0.9 0.98 1.07 1.18 744 748 751 755 759 764 772 787 801 0.7 772 0.75 826 0.87 0.75 775 0.8 830 0.89 0.79 779 0.84 833 0.93 0.83 783 0.88 737 0.97 0.89 787 0.93 841 1.02 0.95 793 1 846 1.1 1.03 801 1.08 853 1.19 1.13 815 1.18 862 1.3 1.22 829 1.28 872 1.41 1.49 kW Oversized Motor and High Static Drive Table PD-17— Continued External Static Pressure (Pascal) m3/hr 349 398 RPM kW RPM kW 1.49 kW Oversized Motor and High Static Drive 4417 881 0.97 936 1.08 4715 884 1.01 938 1.13 5012 886 1.05 939 1.17 5309 889 1.1 941 1.22 5607 892 1.15 945 1.29 5904 897 1.22 950 1.38 6201 902 1.29 955 1.48 6499 912 1.41 960 1.63 6796 922 1.52 965 1.72 SSP-PRC002-EN Performance Data (Air Handler) Table PD-19 — Evaporator Fan Performance — TWE155B (I-P) External Static Pressure (Inches of Water Column) CFM 4000 4250 4500 4750 5000 5260 5500 5750 6000 .10" .20" .30" .40" .50" .60" .70" .80" .90" 1.00" 1.20" 1.40" RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 628 633 637 641 645 650 652 653 655 1.34 1.37 1.40 1.42 1.44 1.46 1.47 1.48 1.49 653 658 662 666 670 675 678 680 681 1.38 1.41 1.44 1.50 1.52 1.53 1.55 1.57 1.59 2.0 HP Standard Motor and Drive 678 1.43 692 1.48 708 1.52 723 683 1.46 697 1.51 713 1.55 728 687 1.49 701 1.53 717 1.58 732 691 1.53 705 1.61 721 1.63 736 695 1.56 710 1.65 725 1.67 739 700 1.59 716 1.67 728 1.70 741 703 1.63 721 1.71 734 1.75 747 706 1.68 726 1.76 743 1.81 761 709 1.74 731 1.80 752 1.87 774 1.57 1.60 1.63 1.65 1.68 1.73 1.78 1.86 1.94 738 743 747 751 758 765 775 789 803 1.60 1.62 1.64 1.66 1.70 1.75 1.83 1.94 2.05 749 751 754 765 777 790 804 817 831 1.61 1.63 1.65 1.67 1.74 1.82 1.92 2.04 2.17 759 770 782 793 806 819 832 846 860 1.62 1.64 1.67 1.72 1.81 1.92 2.03 2.16 2.29 795 806 817 828 839 849 861 875 889 3.0 HP Oversized Motor and High Static Drive 1.66 851 1.85 907 2.03 1.71 862 1.90 918 2.11 1.76 873 1.96 929 2.19 1.81 884 2.01 940 2.27 1.91 896 2.13 — — 2.03 907 2.28 — — 2.15 920 2.44 — — 2.29 935 2.61 — — 2.44 950 2.78 — — Notes: 1. Performance based on a wet coil and 2 inch (51 mm) throwaway filters. 2. Tabulated brake horsepower is the motor shaft output required. 3. Factory setting of motor sheave is 1.5 turns open. Adjustments are made in 0.5 turn increments. Table PD-19 — Evaporator Fan Performance TWE155B (SI) External Static Pressure (Pascal) m3/hr 6796 7221 7646 8070 8495 8937 9345 9769 10194 25 50 75 100 125 150 174 199 224 249 299 349 RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW 628 633 637 641 645 650 652 653 655 1 1.02 1.04 1.06 1.07 1.09 1.1 1.1 1.11 653 658 662 666 670 675 678 680 681 1.03 1.05 1.07 1.12 1.13 1.14 1.16 1.17 1.19 1.49 kW Standard Motor and Drive 678 1.07 692 1.1 708 1.13 723 1.17 683 1.09 697 1.13 713 1.16 728 1.19 687 1.11 701 1.14 717 1.18 732 1.22 691 1.14 705 1.2 721 1.22 736 1.23 695 1.16 710 1.23 725 1.25 739 1.25 700 1.19 716 1.25 728 1.27 741 1.29 703 1.22 721 1.28 734 1.3 747 1.33 706 1.25 726 1.31 743 1.3 761 1.39 709 1.3 731 1.34 752 1.35 774 1.45 738 743 747 751 758 765 775 789 803 1.19 1.21 1.23 1.24 1.27 1.3 1.36 1.45 1.53 749 751 754 765 777 790 804 817 831 1.2 1.22 1.23 1.25 1.3 1.36 1.43 1.52 1.62 759 770 782 793 806 819 832 846 860 1.21 1.22 1.25 1.28 1.35 1.43 1.51 1.61 1.71 2.24 kW Oversized Motor and High Static Drive 795 1.24 851 1.38 907 1.51 806 1.28 862 1.42 918 1.57 817 1.31 873 1.46 929 1.63 828 1.35 884 1.5 940 1.69 839 1.42 896 1.59 — — 849 1.51 907 1.7 — — 861 1.6 920 1.82 — — 875 1.71 935 1.95 — — 889 1.82 950 2.07 — — Notes: 1. Performance based on a wet coil and 2 inch (51 mm) throwaway filters. 2. Tabulated brake horsepower is the motor shaft output required. 3. Factory setting of motor sheave is 1.5 turns open. Adjustments are made in 0.5 turn increments. Table PD-20— Blower Speeds — TWE155B Motor SheaveTurns Open Drive Standard High Static SSP-PRC002-EN 6 5 4 3 2 1 0 619 777 648 806 677 835 705 863 734 892 763 921 N/A 950 27 Performance Data (Air Handler) Table PD-21— Evaporator Fan Performance TWE200B (I-P) External Static Pressure (In. Of Water Column) CFM 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 140 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 5200 — — 5525 — — 5850 — — 6175 473 0.99 6500 492 1.12 6825 510 1.25 7150 528 1.38 7475 550 1.61 7800 572 1.83 3.0 HP Standard Motor and Low Static Drive 461 479 497 515 534 552 570 594 618 0.74 503 0.91 545 0.88 521 1.04 563 1.01 539 1.18 581 1.15 557 1.31 599 1.28 576 1.45 618 1.42 594 1.59 636 1.56 612 1.73 654 1.77 640 1.92 683 1.97 668 2.10 712 3 HP Standard Motor and Low Static Drive System II 1.07 1.21 1.34 1.48 1.61 1.75 1.90 2.08 2.27 587 605 623 641 660 678 697 721 746 1.03 1.21 1.39 1.57 1.75 1.91 2.07 2.29 2.52 619 640 661 682 702 723 744 760 776 1.17 685 1.40 723 1.59 1.35 701 1.58 739 1.77 1.53 717 1.76 755 1.95 1.71 732 1.94 769 2.12 1.90 748 2.12 784 2.30 2.10 763 2.30 794 2.47 2.30 779 2.49 804 2.64 2.50 790 2.67 815 2.81 2.69 802 2.84 826 2.99 3 HP Standard Motor and Standard Drive System Notes: 1. Performance based on a wet coil and 2 inch (51 mm) throwaway filters. 2. Tabulated brake horsepower is the motor shaft output required. 3. Factory setting of motor sheave is 1.5 turns open. Adjustments are made in 0.5 turn increments. 4. Low static drive components referencing this note are field supplied. 750 766 782 796 811 820 830 840 851 1.74 1.92 2.10 2.27 2.45 2.62 2.78 2.96 3.13 777 793 809 823 838 846 855 865 876 1.89 851 2.19 898 2.39 2.07 859 2.37 906 2.60 2.25 868 2.55 915 2.81 2.43 877 2.73 924 3.02 2.60 886 2.91 933 3.22 2.77 894 3.09 941 3.42 2.94 903 3.26 950 3.62 3.11 914 3.47 959 3.85 3.27 926 3.67 969 4.08 5 HP Oversized Motor and High Static Drive System Table PD-21— Continued External Static Pressure (In. Of Water Column) CFM 1.60 1.80 RPM BHP RPM BHP 5 HP Oversized Motor and High Static Drive System 5200 944 2.75 989 3.12 5525 952 2.96 997 3.33 5850 961 3.17 1006 3.54 5175 970 3.38 1015 3.75 8500 978 3.59 1023 3.96 8825 986 3.80 — — 7150 994 4.01 — — 7475 1003 4.25 — — 7800 1012 4.50 — — Table PD-21— Evaporator Fan Performance TWE200B (SI) External Static Pressure (Pascal) m3/hr 25 50 75 100 125 150 174 199 224 249 299 349 RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW 8835 — — 461 0.55 503 0.68 545 0.8 9387 — — 479 0.66 521 0.78 563 0.9 9939 — — 497 0.75 539 0.88 581 1 10491 473 0.74 515 0.86 557 0.98 599 1.1 11044 492 0.84 534 0.95 576 1.08 618 1.2 11596 510 0.93 552 1.06 594 1.19 636 1.3 12148 528 1.03 570 1.16 612 1.29 654 1.42 12700 550 1.2 594 1.32 640 1.43 683 1.55 13252 572 1.36 618 1.47 668 1.57 712 1.69 2.24 kW Standard 2.24 kW Standard Motor and Low Motor and Low Static Drive System Static Drive System II 587 605 623 641 660 678 697 721 746 0.77 0.9 1.04 1.17 1.3 1.42 1.54 1.71 1.88 619 640 661 682 702 723 744 760 776 0.87 1.01 1.14 1.28 1.42 1.57 1.72 1.87 2.01 685 1.04 723 1.19 750 701 1.18 739 1.32 766 717 1.31 755 1.45 782 732 1.45 769 1.58 796 748 1.58 784 1.72 811 763 1.72 794 1.84 820 779 1.86 804 1.97 830 790 1.99 815 2.1 840 802 2.12 826 2.23 851 2.24 kW Standard Motor and Standard Drive System Notes: 1. Performance based on a wet coil and 2 inch (51 mm) throwaway filters. 2. Tabulated brake horsepower is the motor shaft output required. 3. Factory setting of motor sheave is 1.5 turns open. Adjustments are made in 0.5 turn increments. 4. Low static drive components referencing this note are field supplied. External Static Pressure (Pascal) m3/hr Motor SheaveTurns Open Standard Low Static I Low Static II High Static 28 777 1.41 851 1.63 898 1.78 793 1.54 859 1.77 906 1.94 809 1.68 868 1.9 915 2.1 823 1.81 877 2.04 924 2.52 838 1.94 886 2.17 933 2.4 846 2.07 894 2.3 941 2.55 855 2.19 903 2.43 950 2.7 865 2.32 914 2.59 959 2.87 876 2.44 926 2.74 969 3.04 3.73 kW Oversized Motor and High Static Drive System Table PD-21— Continued Table PD-22 — Blower Speeds — TWE200B Drive 1.3 1.43 1.57 1.69 1.83 1.95 2.07 2.21 2.33 6 5 4 3 2 1 0 706 457 574 N/A 732 478 595 821 758 500 617 862 784 521 638 903 811 542 659 945 837 563 680 986 863 585 702 1027 398 448 RPM kW RPM kW 3.73 kW Oversized Motor and High Static Drive System 8835 944 2.05 989 2.33 9387 952 2.21 997 2.48 9939 961 2.36 1006 2.64 10491 970 2.52 1015 2.8 11044 978 2.68 1023 2.95 11596 986 2.83 — — 12148 994 2.99 — — 12700 1003 3.17 — — 13252 1012 3.36 — — SSP-PRC002-EN Performance Data Table PD-23— Discharge Plenum And Grille Assembly Throw Distance — Air Handler — ft (m) Unit Louver Angle Deflection Position CFM m3/h Straight 20 40 55 1400 1600 1800 2000 2200 2100 2378 2718 3058 3398 3737 3568 38 (11.6) 42 (12.8) 46 (14.0) 48 (14.6) 51 (15.5) 49 (14.9) 24 (7.3) 31 (9.4) 37 (11.3) 43 (13.1) 50 (15.2) 38 (11.6) 22 (6.7) 26 (7.9) 29 (8.8) 33 (10.1) 36 (11.0) 31 (9.4) 18 (5.5) 20 (6.1) 22 (6.7) 24 (7.3) 25 (7.6) 27 (8.2) TWE075 2400 2700 3000 3200 3600 4077 4587 5097 5436 6116 52 (15.9) 55 (16.8) 58 (17.7) 56 (17.1) 62 (18.9) 43 (13.1) 48 (14.6) 53 (16.2) 46 (14.0) 51 (15.5) 35 (10.7) 38 (11.6) 42 (12.8) 38 (11.6) 42 (12.8) 29 (8.8) 31 (9.4) 32 (9.8) 30 (9.1) 33 (10.1) TWE100 4000 4400 4800 4300 4900 6795 7475 8154 7305 8324 66 (20.1) 71 (21.6) 76 (23.2) 42 (12.8) 47 (14.3) 57 (17.4) 62 (18.9) 67 (20.4) 32 (9.8) 38 (11.6) 47 (14.3) 52 (15.9) 56 (17.1) 29 (8.8) 32 (9.8) 35 (10.7) 38 (11.6) 42 (12.8) 21 (6.4) 25 (7.6) 5400 5600 6000 6400 9174 9514 10193 10873 52 (15.9) 50 (15.2) 57 (17.4) 56 (17.1) 44 (13.4) 40 (12.2) 49 (14.9) 46 (14.0) 37 (11.3) 33 (10.1) 41 (12.5) 38 (11.6) 29 (8.8) 27 (8.2) 32 (9.8) 30 (9.1) 7200 8000 12232 13591 62 (18.9) 66 (20.1) 51 (15.5) 57 (17.4) 42 (12.8) 47 (14.3) 33 (10.1) 35 (10.7) Model No. TWE050 TWE155 TWE200 Throw distance values are based on a terminal velocity of 75 FPM (0.38 m/s). Throw distance values at other terminal velocities may be established by multiplying throw distances in table above by throw factor: Terminal Velocity Throw Factor 50 fpm (.25 m/s) x 1.50 100 fpm (.51 m/s) x .75 150 fpm (.76 m/s) x .50 Table PD-24— Static Pressure Drop Through Accessories (Inches Of Water Column)1 — Air Handler Unit Model No. Discharge Return Grille Plenum and Grille2 In. wc1 Pascal In. wc1 Pascal 5-10 Electric Heaters (kW) 15-20 25-30 In. wc (Pascal) 35-50 CFM m3/h TWE050A 1400 1600 2000 2380 2718 3398 .09 .12 .18 (22.4) (29.9) (44.8) .16 .21 .33 (39.8) (52.3) (82.2) .06 (15.0) 08 (19.9) .13 (32.4) .06 (15.0) .08 (19.9) .13 (32.4) .12 (29.9) .14 (34.9) .19 (47.3) — — — TWE075A 2100 2400 3000 3568 4079 5098 .05 .08 .13 (12.5) (19.9) (32.4) .19 .27 .40 (47.3) (67.2) (99.6) .02 (5.0) .03 (7.5) .06 (15.0) .03 (7.5) .06 (15.0) .12 (29.9) .05 (12.5) .08 (19.9) .17 (42.4) .08 (19.9) .12 (29.9) .23 (57.3) TWE100A TWE100B 2800 3200 4756 5436 .04 .07 (10.0) (17.4) .34 .43 (84.7) (107.1) .03 (7.5) .06 (15.0) .04 (10.0) .13 (32.4) .14 (34.9) .19 (47.3) .20 (49.8) .26 (64.8) TWE155B 4300 4800 6000 7304 8154 10195 .07 .09 .15 (17.4) (22.4) (37.4) .18 .23 .34 (44.8) (57.3) (84.7) .02 (5.0) .03 (7.5) .06 (15.0) .02 (5.0) .03 (7.5) .06 (15.0) .04 (10.0) .06 (15.0) .12 (29.9) .05 (12.5) .08 (19.9) .17 (42.4) TWE200B 5600 6400 8000 9515 10872 13594 .07 .11 .17 (17.4) (27.4) (42.3) .32 .43 .66 (79.7) (107.1) (164.3) .04 (10.0) .06 (15.0) .10 (25.0) .04 (10.0) .06 (15.0) .10 (25.0) .10 (25.0) .13 (32.4) .20 (49.8) .15 (37.4) .19 (47.3) .30 (74.7) 1. Return air filter ESP included in Fan PerformanceTable data. 2. At louver opening angle of 42°F (5.5°C). For ESP at other angle openings, see accessory Installer’s Guide. SSP-PRC002-EN 29 Performance Data Table PD-25 — Auxiliary Electric Heat Capacity — Air Handler No. Stage 1 Total Total of kW Stages kW Input Btu Output kW Output kW Input Btu Output TWE050, 075,100 3.47 6.92 10.39 17.31 1 1 1 2 3.47 9.92 10.39 10.39 11,851 23,606 35,457 35,457 3.47 6.92 10.39 10.39 — — — 6.92 — — — 23,606 — — — 6.92 11,851 23,606 35,457 59,063 3.47 6.92 10.39 17.31 TWE075, 100A, 100 24.22 2 13.83 47,213 13.83 10.39 35,457 10.39 82,670 24.22 TWE155, 200 6.94 13.83 20.78 34,62 1 1 2 2 6.94 13.83 13.83 20.78 23,701 47,213 47,213 70,915 6.94 13.83 13.83 20.78 — — 6.94 13.84 — — 23,701 47,213 — 23,701 — 47,213 6.94 70,915 13.89 118,128 6.94 13.83 20.78 34.61 *Heaters are rated at 400v. For other than rated voltage, 2 Capacity = Voltage x Rated Capacity and kW = Rated Voltage ( 30 Stage 2 Unit Model No. ) ( RatedVoltage Voltage ) kW Btu Output Output kW Output 2 x Rated kW. SSP-PRC002-EN Electrical Data Table ED-1— Electrical Characteristics — Motors — Air Handler Unit Model No. TWE050 TWE075 TWE100 TWE155 TWE200 Standard Fan Motor Amps Phase FLA 3 1.4 3 3.2 3 3.6 3 4.6 3 7.6 Volts 380/415 380/415 380/415 380/415 380/415 LRA 8.2 19.7 25.5 37.5 39.2 Oversized Fan Motor Amps Phase FLA 3 1.8 3 4.0 3 5.3 3 6.9 3 9.0 LRA 21.6 25.5 37.5 39.2 65.1 Table ED-2 — Unit Wiring — Air Handler Unit Model No. TWE050 TWE075 TWE100 TWE155 TWE200 Minimum Circuit Ampacity 2 4 5 6 10 Unit Operating Voltage Range 380/415 380/415 380/415 380/415 380/415 Maximum Fuse Size or Maximum Circuit Breaker 15 15 15 15 15 Table ED-3— Electrical Characteristics — Motors — 50 Cycle — Heat Pumps Compressor Motor Amps Unit Model No. TWA075AD TWA100AD TWA155BD TWA200BD No. 1 1 2 2 Volts 380/415 380/415 380/415 380/415 Phase 3 3 3 3 RLA (Ea.) 8.8 15.8 11.2 15.8 Condenser Fan Motor Amps LRA (Ea.) 90.0 124.0 94.8 124.0 No. 1 1 2 2 Volts 380/415 380/415 380/415 380/415 Phase 1 1 1 1 FLA (Ea.) 1.6 2.7 1.6 2.7 LRA (Ea.) 3.7 7.0 3.7 7.0 Table ED-4 — Unit Wiring — Heat Pumps Unit Model No. TWA075 TWA100 TWA155 TWA200 SSP-PRC002-EN Unit Operating Voltage Range 380/415 380/415 380/415 380/415 Minimum Circuit Ampacity 12.6 22 .5 28.4 41.0 Maximum Fuse Size or Maximum Circuit Breaker 50 35 35 50 31 Electrical Data Table ED-5— Unit Wiring With Electric Heat (Single Point Connection) — Air Handlers Heater Model No. BAYHTRL405A BAYHTRL410A BAYHTRL415A BAYHTRL425A BAYHTRL405A BAYHTRL410A BAYHTRL415A BAYHTRL425A BAYHTRL435A BAYHTRL405A BAYHTRL410A BAYHTRL415A BAYHTRL425A BAYHTRL435A BAYHTRM410A BAYHTRM420A BAYHTRM430A BAYHTRM450A BAYHTRM410A BAYHTRM420A BAYHTRM430A BAYHTRM450A Heater kW Rating1 3.47 6.92 10.39 17.31 3.47 6.92 10.39 17.31 24.22 3.47 6.92 10.39 20.78 24.22 6.94 13.83 20.78 34.62 6.94 13.83 20.78 34.62 To Use with Unit Control Stages 1 1 1 2 1 1 1 2 2 1 1 1 2 2 1 1 2 2 1 1 2 2 TWE050AD TWE075AD TWE100AD, TWE100BD TWE155BD TWE200BD 1. kW ratings are at 400v for 3 phase, 400v air handlers 2 Voltage Voltage For other than rated voltage, ampacity = x Rated Capacity and kW = Rated Voltage Rated Voltage 2. Any power supply and circuits must be wired and protected in accordance with local codes. 3. Field wire must be rated at least 75°C. 4. Field wire must be rated at least 90°C. ( 32 ) ( Minimum Circuit Ampacity 2 9 17 24 39 11 18 26 41 56 12 19 27 42 57 21 36 51 81 25 40 55 85 ) Maximum Fuse Breaker Size 2 15 20 25 40 15 20 30 45 60 15 25 30 45 60 30 40 60 90 40 50 60 90 2 Rated kW. SSP-PRC002-EN Jobsite Connections Wiring shown with dashed lines is to be furnished and installed by the customer. All customer- supplied wiring must be copper only and must conform to NEC and local electrical codes. Codes may require line of sight between disconnect switch and unit. NOTE: 1. When electric heater accessory is used single point power entry or dual point power entry is field optional. Single point power entry option is through electric heater only. TWA050/TWE050 Field Wiring: A — 3 power wires. Line voltage. B — 3 power wires. Line voltage. C — Heat pump thermostat: 6 wires, 24 volts. — Electric heat: add 2 additional wires, 24 volts. D — 2 wires, 24 volts. — Outdoor thermostat: add 1 additional wire per ODT, 24 volts. — Electric heat: add 1 additional wire, 24 volts. (2) TWA050/TWE100B Field Wiring: A — 3 power wires. Line voltage. B — 3 power wires. Line voltage. C — Heat pump thermostat: 7 wires, 24 volts Electric Heat: add 2 additional wires, 24 volts. D — 5 wires, 24 volts to outdoor section ‘’A’’ 2 wires, 24 volts to outdoor section ‘’B’’ 2 wires, 24 volts between outdoor sections ‘’A’’ ‘’B’’ — Electric heat: add 1 additional wire, 24 volts. — Outdoor thermostat: add 1 additional wire, 24 volt. TWA075A/TWE075A; TWA100A/TWE100A Field Wiring: A — 3 power wires, line voltage. B — 3 power wires, line voltage. C — Heat pump thermostat: 6 wires, 24 volts. — Electric heat: add 2 additional wires, 24 volts. D — 6 wires, 24 volts. — Outdoor thermostat: add 1 additional wire, 24 volts. — Electric heat: add 1 additional wire, 24 volts. (2) TWA075A/TWE155B; (2) TWA100A/TWE200B Field Wiring: A — 3 power wires, line voltage. B — 3 power wires, line voltage. C — Heat pump thermostat: 7 wires, 24 volts. — Electric heat: add 2 additional wires, 24 volts. SSP-PRC002-EN D — 9 wires, 24 volts. — Electric heat: add 4 additional wires, 24 volts. — Outdoor thermostat: add 3 additional wires, 24 volts. TWA155B/TWE155B; TWA200B/TWE200B Field Wiring: A — 3 power wires, line voltage. B — 3 power wires, line voltage. C — Heat pump thermostat: 7 wires, 24 volts. — Electric heat: add 2 additional wires, 24 volts. D — 7 wires, 24 volts. — Electric heat: add 4 additional wires, 24 volts. — Outdoor thermostat: add 1 additional wire, 24 volts. 33 Typical Wiring (Heat Pump) Heat Pump — Single Compressor Typical unit wiring diagram. For specific wiring, see individual Service Facts. 34 SSP-PRC002-EN Typical Wiring SSP-PRC002-EN (Heat Pump) 35 Typical Wiring (Heat Pump) Heat Pump — Dual Compressors Typical unit wiring diagram. For specific wiring, see individual Service Facts. 36 SSP-PRC002-EN Typical Wiring SSP-PRC002-EN (Heat Pump) 37 Typical Wiring (Air Handler) Air Handler Typical unit wiring diagram. For specific wiring, see individual Service Facts. 38 SSP-PRC002-EN Dimensional Data (Heat Pump) Figure DD-1 — TWA075 Heat Pump All dimensions are in inches and millimeters. Note 1 MINIMUM CLEARANCE FOR PROPER OPERATION IS 36 INCHES (914 MM) FROM WALLS, SHRUBBERY, PRIVACY FENCES, ETC. MINIMUM CLEARANCE BETWEEN ADJACENT UNITS IS 72 INCHES (1828 MM) SSP-PRC002-EN 39 Dimensional Data (Heat Pump) Figure DD-2 — 10 Ton TWA100A Heat Pump All dimensions are in inches and millimeters. Note 1 MINIMUM CLEARANCE FOR PROPER OPERATION IS 36 INCHES (914 MM) FROM WALLS, SHRUBBERY, PRIVACY FENCES, ETC. MINIMUM CLEARANCE BETWEEN ADJACENT UNITS IS 72 INCHES (1828 MM) 40 SSP-PRC002-EN Dimensional Data (Heat Pump) Figure DD-3 — TWA155B Heat Pump All dimensions are in inches and millimeters. Note 1 MINIMUM CLEARANCE FOR PROPER OPERATION IS 36 INCHES (914 MM) FROM WALLS, SHRUBBERY, PRIVACY FENCES, ETC. MINIMUM CLEARANCE BETWEEN ADJACENT UNITS IS 72 INCHES (1828 MM) SSP-PRC002-EN 41 Dimensional Data (Heat Pump) Figure DD-4 — TWA200B Heat Pump All dimensions are in inches and millimeters. Note 1 MINIMUM CLEARANCE FOR PROPER OPERATION IS 36 INCHES (914 MM) FROM WALLS, SHRUBBERY, PRIVACY FENCES, ETC. MINIMUM CLEARANCE BETWEEN ADJACENT UNITS IS 72 INCHES (1828 MM) 42 SSP-PRC002-EN Dimensional Data (Air Handler) Figure DD-5 — TWE050A Air Handlers All dimensions are in inches and millimeters. Notes: 1. Length, Width, and Height Dimensions do not include 1/2” (12.7mm) access panel depth. 2. Removable drain pan and attached drain connection may be installed on either end of unit in either the vertical or horizontal configuration. Plastic drain pan access plate on the end of unit opposite drain connection must be removed to slide drain pan out for cleaning. Access plate must be reinstalled after sliding drain pan back into unit. 3. If periodic drain pan cleaning is required, allow room for partial removal of pan on drain connection end of unit. SSP-PRC002-EN 43 Dimensional Data (Air Handler) Figure DD-6 — TWE075A Air Handler All dimensions are in inches and millimeters. Notes: 1. Length, Width, and Height Dimensions do not include 1/2” (12.7mm) access panel depth. 2. Removable drain pan and attached drain connection may be installed on either end of unit in either the vertical or horizontal configuration. Plastic drain pan access plate on the end of unit opposite drain connection must be removed to slide drain pan out for cleaning. Access plate must be reinstalled after sliding drain pan back into unit. 3. If periodic drain pan cleaning is required, allow room for partial removal of pan on drain connection end of unit. 44 SSP-PRC002-EN Dimensional Data (Air Handler) Figure DD-7— TWE100A Air Handler All dimensions are in inches and millimeters. Notes: 1. Length, Width, and Height Dimensions do not include 1/2” (12.7mm) access panel depth. 2. Removable drain pan and attached drain connection may be installed on either end of unit in either the vertical or horizontal configuration. Plastic drain pan access plate on the end of unit opposite drain connection must be removed to slide drain pan out for cleaning. Access plate must be reinstalled after sliding drain pan back into unit. 3. If periodic drain pan cleaning is required, allow room for partial removal of pan on drain connection end of unit. SSP-PRC002-EN 45 Dimensional Data (Air Handler) Figure DD-8— TWE100B Air Handler All dimensions are in inches and millimeters. Notes: 1. Length, Width, and Height Dimensions do not include 1/2” (12.7mm) access panel depth. 2. Removable drain pan and attached drain connection may be installed on either end of unit in either the vertical or horizontal configuration. Plastic drain pan access plate on the end of unit opposite drain connection must be removed to slide drain pan out for cleaning. Access plate must be reinstalled after sliding drain pan back into unit. 3. If periodic drain pan cleaning is required, allow room for partial removal of pan on drain connection end of unit. 46 SSP-PRC002-EN Dimensional Data (Air Handlers) Figure DD-9— TWE050A, 075A, 100A and TWE100B Air Handler All dimensions are in inches and millimeters. Table DD-1 — Air Handler Dimensions — in. (mm) Model No. TWE050A TWE075A TWE100A TWE100B SSP-PRC002-EN AA 35 5/8 (905) 45 1/8 (1146.2) 61 1/8 (1552.6) 61 1/8 (1552.6) AB 12 1/16 (306.4) 16 (406.4) 16 (406.4) 16 (406.4) AC 1 5/8 (41.3) 1 11/16 (42.9) 1 11/16 (42.9) 1 11/16 (42.9) AD 32 1/4 (819.2) 41 15/16 (1065.2) 57 15/16 (1471.6) 57 15/16 (1471.6) AE 2 15/16 (74.6) 6 5/8 (168.3) 6 5/8 (168.3) 6 5/8 (168.3) AF 32 1/4 (819.2) 41 3/4 (1060.5) 57 13/16 (1468.4) 57 13/16 (1468.4) AJ 7 13/16 (198.4) 7 (177.8) 7 (177.8) 7 (177.8) AK 12 3/8 (314.3) 16 (406.4) 16 (406.4) 16 (406.4) AL 34 9/16 (878) 36 7/8 (936.6) 36 7/8 (936.6) 36 7/8 (936.6) 47 Dimensional Data (Air Handler) Figure DD-10— TWE155B Air Handler All dimensions are in inches and millimeters. Notes: 1. Length, Width, and Height Dimensions do not include 1/2” (12.7mm) access panel depth. 2. Removable drain pan and attached drain connection may be installed on either end of unit in either the vertical or horizontal configuration. Plastic drain pan access plate on the end of unit opposite drain connection must be removed to slide drain pan out for cleaning. Access plate must be reinstalled after sliding drain pan back into unit. 3. If periodic drain pan cleaning is required, allow room for partial removal of pan on drain connection end of unit. 48 SSP-PRC002-EN Dimensional Data (Air Handlers) Figure DD-11 — TWE200B Air Handler All dimensions are in inches and millimeters. Notes: 1. Length, Width, and Height Dimensions do not include 1/2” (12.7mm) access panel depth. 2. Removable drain pan and attached drain connection may be installed on either end of unit in either the vertical or horizontal configuration. Plastic drain pan access plate on the end of unit opposite drain connection must be removed to slide drain pan out for cleaning. Access plate must be reinstalled after sliding drain pan back into unit. 3. If periodic drain pan cleaning is required, allow room for partial removal of pan on drain connection end of unit. SSP-PRC002-EN 49 Dimensional Data (Air Handlers) Figure DD-12— TWE155B and 200B Air Handlers All dimensions are in inches and millimeters. Table DD-2 — Air Handler Dimensions — in. (mm) Model No. TWE155B TWE200B A 77 1/4 (1962.2) 89 1/4 (2267) B 1 3/16 (30.2) 1 11/16 (42.9) C 48 (1219.2) 50 13/16 (1290.6) D 11 7/16 (290.5) 11 1/2 (292.1) E 18 (457.2) 20 1/8 (511.2) F 3 3/8 (85.7) 3 1/16 (77.8) G 35 1/16 (890.6) 39 1/8 (993.8) H 73 7/8 (1876.4) 82 7/8 (2105) J 3 3/4 (95.3) 4 9/16 (115.9) P 2 7/8 (73) 4 13/16 (122.2) Q 35 1/16 (890.6) 39 1/8 (993.8) R 3 3/4 (95.3) 4 9/16 (115.9) S 35 1/16 (890.6) 39 1/8 (993.8) T 73 3/8 (1863.7) 82 7/8 (2105) Table DD-2— Air Handler Dimensions — in. (mm) (Continued) Model No. TWE155B TWE200B 50 K 35 1/16 (890.6) 39 1/8 (993.8) L 2 13/16 (71.4) 4 7/8 (123.8) M 18 (457.2) 20 (508) N 3 9/16 (90.5) 3 (76.2) SSP-PRC002-EN Dimensional Data (Accessories) Figure DD-13— Electric Heater for TWE050, 075, 100 Air Handlers All dimensions are in inches and millimeters. Figure DD-14 — Electric Heater for TWE155 and 200 Air Handlers SSP-PRC002-EN 51 Mechanical Specifications Heat Pumps General Unit shall be assembled on heavy gauge steel mounting/lifting rails and shall be weather proofed. Unit shall include a hermetic scroll or reciprocating compressor(s), plate fin condenser coil, fans and motors, controls, and holding charge of nitrogen. Operating Range shall be between 115° F (46°C) and 50°F (10°C) in cooling as standard from factory. Unit shall be UL 1995 listed and rated in accordance with ARI Standard 340/360. Casing Unit casing shall be constructed of zinc coated, heavy gauge, galvanized steel. Exterior surfaces shall be cleaned, phosphatized, and finished with a weather-resistant baked enamel finish. Unit’s surface shall be tested 500 hours in salt spray test. Unit shall have removable end panels which allow access to all major components and controls. Refrigeration System — Single Compressor TWA075A,TWA100A units shall have a single refrigeration circuit. Each refrigeration circuit has an integral subcooling circuit. A refrigeration filter drier, expansion valve, and check valves shall be provided as standard.The unit shall have both a liquid line and suction gas line service valve with gauge port. Unit shall have one direct drive,Trane hermetic scroll compressor with centrifugal oil pump providing positive lubrication to moving parts. Motor shall be suction gas-cooled and shall have a voltage utilization range of plus or minus 10 percent of nameplate voltage. Crankcase heater, discharge line thermostat, and current-sensitive motor overloads shall be included for maximum protection. Scroll type compressor shall provide inherently low vibration and noise by having no suction and discharge valves. External high and low pressure cutout devices shall be provided. Evaporator defrost control provided in indoor blower coil unit shall prevent compressor slugging by temporarily interrupting compressor operation when low evaporator coil temperatures are encountered. 52 Refrigeration System — Dual Compressor TWA155B,TWA200B units shall have two separate and independent refrigeration circuits. Each refrigeration circuit shall have an integral subcooling circuit. A refrigeration filter drier shall be provided as standard. Unit shall have both a liquid line and suction gas line service valve with gauge ports. Unit shall have twoTrane direct drive, hermetic scroll compressors with centrifugal oil pump and provide positive lubrication to all moving parts. Motor shall be suction gas-cooled and shall have a voltage utilization range of plus or minus 10 percent of nameplate voltage. Crankcase heater, and current-sensitive motor overloads shall be included for maximum protection. Scroll type compressor shall provide inherently low vibration and noise by having no suction and discharge valves. External high and low pressure cutout devices shall be provided. Evaporator defrost control provided in indoor blower coil shall prevent compressor slugging by temporarily interrupting compressor operation when low evaporator coil temperatures are encountered. Condenser Coil Coils shall be internally finned or smooth bore, 3/8" (10mm) copper tubes mechanically bonded to a configured aluminum plate fin as standard. Coil shall be factory pressure and leak tested to 420 psig (2,930 kPa) air pressure. Metal grilles with PVC coating for coil protection is optional. Condenser Fan And Motor(s) Direct-drive, statically and dynamically balanced, 26 or 28 inch (660 or 711 mm) propeller fan(s) with aluminum blades and electro-coated steel hubs shall be used in draw-through vertical discharge position. Either permanently lubricated totally enclosed or open construction type motors shall be provided and shall have built-in current and thermal overload protection. Motor(s) shall have either ball or sleeve bearing type. Controls Heat pump units shall be completely factory wired with necessary controls and contactor pressure lugs or terminal block for power wiring. Control wiring shall be 24-volt control circuit which includes fusing and control transformer. Units shall provide external location for mounting a fused disconnect device. Time delay timers to prevent compressors in dual compressor units from simultaneous start-up and antirecycle timers are available as optional accessories. Defrost Controls Electronic timed initiated, temperature terminated defrost system with choice of 50, 70, or 90 minute cycle shall be included.Timed override limits defrost cycle to 10 minutes. Low Ambient Operation Standard units shall start and operate to approximately 50°F (10°C) when matched withTrane air handlers and coils. Optional head pressure control accessory permits operation to 0°F (-17.8°C). ACCESSORIES Low Ambient Head Pressure Control — This accessory shall modulate the RPM of unit outdoor fan motor in response to outdoor ambient temperatures and liquid line temperature. Accessory provides unit cooling operation to outdoor temperatures of 0°F (-17.8°C). Vibration Isolation Packages —This accessory shall reduce transmission of noise and vibration to building structures, equipment, and adjacent spaces. Packages shall be available in either neoprene-in-shear or spring-flex types. Time Delay Relay —This accessory shall prevent compressors in dual compressor unit from coming on line simultaneously.Timer shall be 24-volt, 60 cycle, with four minute timing period. Anti-Short-Cycle Timer —This accessory shall prevent rapid on-off compressor cycling in light load conditions by not allowing compressor to operate for 5-7 minutes upon shutdown.This accessory shall consist of a 24-volt, 60 cycle, solid state timing device with either 5 or 7 minute fixedoff timing period. SSP-PRC002-EN Mechanical Specifications Condenser Coil Guard — Metal grille with PVC coating shall be provided to alleviate coil damage. Black Epoxy Coated Condenser Coil — This factory installed option is designed to provide corrosion protection of air cooled condenser coils for seacoast application. The black epoxy coil protection is a factory applied thermoset vinyl coating, bonded to normal aluminum fin stock. The uniform thickness of the bonded vinyl layer exhibits excellent corrosion protection in salt spray tests performed in accordance with ASTM B177. Air Handlers General Air handler units shall be completely factory assembled including coil, condensate drain pan, fan motor(s), filters, and controls in an insulated casing that can be applied in either vertical or horizontal configuration. Unit shall be rated and tested in accordance with ARI standard 340/360. Unit shall be UL listed and labeled in accordance with UL 1995 for indoor blower coil units. Casing Unit casing shall be constructed of zinc coated, heavy gauge, galvanized steel. Exterior surfaces shall be cleaned, phosphatized, and finished with a weather-resistant baked enamel finish. Casing shall be completely insulated with cleanable, foil faced, fire-retardant, permanent, odorless, glass fiber material. All insulation edges shall be either captured or sealed. Knockouts shall be provided for unit electrical power and refrigerant piping connections. Captive screws shall be standard on all access panels. Refrigeration System TheTWE050A,TWE075A,TWE100A units shall have a single refrigeration circuit and theTWE100B,TWE155B,TWE200B units shall have dual refrigeration circuits. Each refrigeration circuit is controlled by a factory installed thermal expansion valve. Evaporator Coil Configured aluminum fin surface shall be mechanically bonded to 3/8" (10 mm) internally enhanced copper tubing and SSP-PRC002-EN shall be factory pressure and leak tested at 375 psig (2586 kPa). Coil is arranged for draw-through airflow and shall provide a double sloped condensate drain pan constructed of PVC plastic.The drain pan shall be removable for cleaning.The condensate drain pan can be installed in any of four positions allowing for vertical or horizontal application and providing external connections on either side of the unit. Evaporator Fan Double inlet, double width, forward curved, centrifugal-type fan(s) with adjustable belt drive shall be standard. Thermal overload protection shall be standard on motor. Fan and motor bearings shall be permanently lubricated. Oversized motors shall be available as an option for high static application. All indoor fan motors meet the U.S. Energy Policy Act of 1992 (EPACT). Controls Magnetic evaporator fan contactor, low voltage terminal strip, check valve(s), and single point power entry shall be included. All necessary controls shall be factory-installed and wired. Evaporator defrost control shall be included to prevent compressor slugging by temporarily interrupting compressor operation when low evaporator coil temperatures are encountered. Filters One inch, throw-away filters shall be standard onTWE050A,TWE075A, TWE100A and TWE120B model air handlers. Filters shall be accessible from the side coil access panel. Filter rack can be field converted to two inch capability. Two inch, throw-away filters shall be standard onTWE155B andTWE200B models. ACCESSORIES Electric Heaters — UL and CSA approved electric heat modules shall be available for installation directly on fan discharge. Electric heaters shall be available in a wide range of capacities with one or two stage control, singlepoint electric power connection, and terminal strip connections. Electric heater elements shall be constructed of heavy-duty nickel chromium elements internally wye connected on 400 volt, three phase. Each 400 volt heater shall have automatic line break high limit controls. Discharge Plenums and Grilles — Accessory discharge plenums shall be available for vertical, free discharge applications. Plenums shall be constructed of heavy-gauge, zinc coated, galvanized steel finished with baked enamel to match the air handler unit. Grilles shall be satin finished aluminum and have four-way adjustable louvers. Return Air Grilles — Accessory return air grille shall be provided for vertical front, free return applications. Grilles shall be installed in place of the front lower side panel. Grille shall be satin finished aluminum with non-adjustable louvers. Mounting Subbase —The accessory shall be available for vertical floor mount configurations. Subbase shall be constructed of heavy gauge, zinc coated, galvanized steel with baked enamel finish to match air handler unit. Subbase is required in the vertical air flow application for condensate drain trapping and when isolators are required. Vibration Isolators —This accessory shall reduce transmission of noise and vibration to building structures, equipment, and adjacent spaces. Packages shall be available in either neoprene-in shear or spring-flex types in floor or suspended mountings. Oversized Motors — Field installed oversized motors shall be available for high static pressure applications. CONTROL OPTIONS Standard Indoor Thermostats —Two stage heating and cooling operation or one stage heating and cooling thermostats shall be available in either manual or automatic changeover. Programmable Electronic Night Setback Thermostat —The option shall provide heating setback and cooling setup with 7day programming capability. Outdoor Thermostat —This option shall provide staging control of electric heaters based on a set outdoor temperature. 53 Trane An American Standard Company www.trane.com For more information contact your local office or e-mail us at comfort@trane.com Literature Order Number SSP-PRC002-EN File Number PL-UN-SSP-PRC002-EN-0104 Supersedes SS-PRC002-EN 1103 Stocking Location Electronic Only Since Trane has a policy of continuous product and product data improvement, it reserves the right to change design and specifications without notice.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 56 Page Mode : UseOutlines Page Layout : SinglePage XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:d0aa52bf-82bf-4ab3-b7af-ae7c5e8bb310 Producer : Acrobat Distiller 5.0.5 (Windows) Create Date : 2003:10:21 16:23:47Z Modify Date : 2004:05:05 12:13:06-05:00 Metadata Date : 2004:05:05 12:13:06-05:00 Creator Tool : PageMaker 6.5 Document ID : uuid:f9e65cc4-993d-4961-b53d-6f4167eb0a23 Format : application/pdf Creator : lalko Title : SSPPRC002EN_BK1.p65 Author : lalkoEXIF Metadata provided by EXIF.tools