Trane Varitrac Dampers Brochure VAV SLB006 EN.p65

: Trane Trane-Varitrac-Dampers-Brochure-684384 trane-varitrac-dampers-brochure-684384 trane pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Zone Occupancy
Sensor
Figure 1: Zone Occupancy Sensor

The zone occupancy sensor works with
applications and zones having
intermittent occupancy during the
occupied mode.The sensor transmits a
signal to a building automation system
upon detection of movement in the
coverage area. Movement is detected by
Passive Infrared (PIR) sensing technology
contained within the zone occupancy
sensor. Since the sensor must detect
movement from an occupant, careful
consideration must be taken regarding
sensor placement.

Features
— Ceiling Mounted PIR Sensing
— SPDT Isolated Relay Contacts
— 0–360° Field of View
— 1200 square feet Coverage Area and 22
feet Radius
— Time Delays of 30 seconds, 10, 20, and 30
minutes
— Maximum and Minimum Sensitivity

The sensor is compatible with Trane
VAV and VariTrac® controllers.The sensor
provides isolated single-pole, doublethrow (SPDT) relay contact outputs to
signal the VariTrane® or VariTrac ontroller.
The zone occupancy sensor has a multicell, multi-tier lens with a maximum field
of view of 360°.The maximum coverage
area of the sensor is 1200 square feet
with a maximum radius of 22 feet from
the sensor when mounted at 8 feet above
the floor. Please visit trane.com or contact
a localTrane representative for
more information.

Table 1: Sensor Specifications

©2002 American Standard, Inc. All rights reserved

Power Supply

24 VAC or 24 VDC, ± 10%

Maximum VA Load

0.88 VA @ 24 VAC,
0.72 VA @ 24 VDC

Isolated Relay Rating

1 A @ 24 VAC or 24 VDC

Operating Temperature

32 to 131°F (0 to 55°C)

Storage Temperature

-22 to 176°F (-30 to 80°C)

Humidity Range

0 to 95% non-condensing

Effective Coverage Area

1200 sq ft

Effective Coverage Radius

22 feet

Housing Material

ABS Plastic

Dimensions

3.56" dia. x 1.9" deep
(90.5 mm x 48.2 mm)
Protrudes 0.36" (9 mm)
from ceiling when
mounted.

VAV-SLB006-EN

When the height of the sensor is less
than 8 feet, the effective range of the
sensor will decrease and the sensitivity
to smaller motions will increase.
Conversely, when height is greater than
eight feet, the effective range of the
sensor will increase and the sensitivity to
smaller motions will decrease. At heights
of more than 12–14 feet, the sensitivity of
the sensor will be significantly reduced.

Placement of the Sensor
Careful considerations must be taken
when locating the sensor in a zone.
Normally, the approximate coverage
with a sensor mounted at a height of
8 feet for an occupant walking is 22 feet
radius. For an occupant at a workstation
(hand motion) the approximate
coverage is 12 feet radius. The effective
coverage distance may be slightly less
than the maximum sensing distance,
depending upon obstacles such as
furniture or partitions.

Masking
Masking is a method to eliminate the
coverage area for applications not
requiring the full field of view of 360°. An
insert (mask) is supplied with each sensor
and is not needed if full area coverage is
desired. Simply cut the mask for the
desired coverage area.

Sensor Settings
The sensor is factory-defaulted with a
time delay of 30 minutes, a maximum
sensitivity and a normal override. By
changing the DIP switch settings located
on the sensor, the time delay can
be configured for 30 seconds, 10 minutes,
and 20 minutes, the sensitivity can be set
for minimum and the override can be
activated in the event of failure. See
installation instructions for details.

Figure 2: Effective Coverage Area
18'

12'

Figure 3: Dimensional Data

Ø0.1875" (4.8 mm)
(Qty of 2)

3.56"
(90.5 mm)

2.76"
(70 mm)
0.36"
(9.1 mm)
1.30"
(33 mm)

Trane
An American Standard Company
www.trane.com
For more information contact
your local district office or
e-mail us at comfort @trane.com
©2002 American Standard, Inc. All rights reserved

1.90"
(48.2 mm)

Literature Order Number

VAV-SLB006-EN

File Number

SB-TD-VAV-000-SLB006-EN-0602

Supersedes

New

Stocking Location

La Crosse

Trane has a policy of continuous product and product data improvement and reserves the right to change design
and specifications without notice.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 2
Create Date                     : 1910:20:62 80:95:65
Producer                        : Acrobat Distiller 3.01 for Windows
Author                          : lahke
Creator                         : PageMaker 6.5
Title                           : VAV-SLB006-EN.p65

EXIF Metadata provided by EXIF.tools