Trango Systems M5800SFSU 5Ghz Wireless Internet Access Point Subscriber User Manual

Trango Systems Inc 5Ghz Wireless Internet Access Point Subscriber 354865

a href="https://usermanual.wiki/Trango-Systems" itemprop="url"> Trango Systems >

users manual

TrangoFOX™ Subscriber Unit (for Access5830™ Wireless Broadband System) User Manual
TrangoFOX™ Subscriber Unit User Manual Trango Broadband Wireless Page 2 Overview This manual covers basic configuration and installation of TrangoFOX Subscriber Units for the Access5830 Wireless Broadband System. The FOX series subscriber units are available three variations. Model Part # Description __________ FOX5800 M5800S-FSU 5.8 GHz FOX SU with internal 15 dBi antenna FOX5300 M5300S-FSU 5.3 GHz FOX SU with internal 15 dBi antenna FOX5800-D M5800S-FSU-D 5.8 GHz FOX SU for Reflector Dish Part# AD5800-25 TrangoFOX subscriber units work in conjunction with 5.8/5.3 GHz dual-band Access5830™ access points. The FOX5800 and FOX5800-D also work in conjunction with 5.8 GHz single-band Access5800™ access points. Please refer to the Access5830 (or Access5800) user manual for detailed information on overall system implementation, configuration, and management of your point-to-multipoint system. The Access5830 User Manual also covers many important details of subscriber unit configuration. FCC Information This device complies with Part 15 of FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in any particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of more of the following measures: 1) Reorient the antenna; 2) Increase the separation between the affected equipment and the unit; 3) Connect the affected equipment to a power outlet on a different circuit from that which the receiver is connected to; 4) Consult the dealer and/or experienced radio/TV technician for help. FCC ID: NCYM5800SFSU NCYM5800SFSUD NCYM5300SFSU Canada: to be announced soon IMPORTANT NOTE: Intentional or unintentional changes or modifications must not be made unless under the express consent of the party responsible for compliance. Any such modifications could void the user’s authority to operate the equipment and will void the manufacturer’s warranty. To comply with FCC RF exposure requirements, the following antenna installation and device operating configurations must be satisfied. The antenna for this unit must be fixed and mounted on outdoor permanent structures with a separation distance of at least two meters from all persons. Furthermore, it must not be co-located or operating in conjunction with any other antenna or transmitter.
Download:
Mirror Download [FCC.gov]
Document ID354865
Application IDmO29hOm+SFvNwHtLoCvWOQ==
Document Descriptionusers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatMicrosoft Word - pdf
Filesize148.41kB (1855107 bits)
Date Submitted2003-09-09 00:00:00
Date Available2003-09-08 00:00:00
Creation Date2003-09-10 10:00:31
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2003-09-10 10:00:31
Document TitleMicrosoft Word - 354865.DOC
Document CreatorPScript5.dll Version 5.2
Document Author: fcc
FCC ID Filing: NCYM5800SFSU

Navigation menu