Trango Systems M915S 900 MHz Transceiver User Manual M915SOEMInstalltion manual

Download:
Mirror Download [FCC.gov]
Document ID	620333
Application ID	Bw4d5tfLyvCeOGjv/qkBAA==
Document Description	Installation Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.89kB (73586 bits)
Date Submitted	2006-01-17 00:00:00
Date Available	2006-01-17 00:00:00
Creation Date	2006-01-09 12:09:41
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2006-01-09 12:09:41
Document Title	Microsoft Word - M915SOEMInstalltion manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	chris

Instructions for use of the M915S-AP or M915S-SU module in an OEM
product without re-certification with the FCC.
1.
When using the external antenna port, the module must be used with either the PC9013N Yagi
antenna from Cushcraft or BS915XL7 from Comtelco.
For more information on these antennas please go to:
http://www.cushcraft.com or http://www.comtelcoantennas.com
IMPORTANT NOTE: If the OEM wishes to use a different external antenna, they MUST certify
their product with the FCC and obtain a unique FCC ID number.
2.
If the FCC ID on the front of the module is not visible when the module is installed in another device,
then the outside of the device into which the module is installed must also display a label referring to
the enclosed module. The exterior label should use wording such as the following:
"FCC ID of module inside: NCYM915S."
or
"This device contains transceiver module FCC ID: NCYM915S."
The exact wording is not specified in the FCC Rules so the OEM may use similar wording which
expresses the same meaning.
In addition, the OEM should place the following text on a label (can be the same label as above)
attached to the outside of the device:
"The transmitter module in this device complies with Part 15 of the FCC rules. Operation is
subject to the following conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference that may cause undesired operation."
3.
For optimum performance the module should be housed in a metal enclosure.
4.
The internal antenna should be clear of any metallic object by at least 1 inch on the sides and 5 inches
from above to prevent reflected RF energy from damaging the unit.
5.
It is recommended to use .050” thick polycarbonate or ABS directly above the internal antenna
element with a clearance of .5 to 1 inch minimum.
6.
Any labeling used on the module to cover up silkscreened text must be non-metallic to prevent
grounding test points and component leads.
7.
Chassis ground should be connected to one of the .125 holes located along the perimeter of the PCB.
8.
This device is static sensitive and should be handled at an ESD approved workstation only.
9.
This device is allowable for uncontrolled RF exposure at 100 cm. The unit is typically mounted in a
fixed position outdoors with at least a separation distance of 100 cm (1 meter) in front of the antenna.
This applies to the patch antenna or any of the approved antennas for the external port The end-user
manual that this module is incorporated into must state that the user should maintain a separation
distance of greater than 1 meter from the antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2006:01:09 12:09:41-08:00
Modify Date                     : 2006:01:09 12:09:41-08:00
Page Count                      : 1
Creation Date                   : 2006:01:09 20:09:41Z
Mod Date                        : 2006:01:09 20:09:41Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : chris
Metadata Date                   : 2006:01:09 20:09:41Z
Creator                         : chris
Title                           : Microsoft Word - M915SOEMInstalltion manual.doc

EXIF Metadata provided by EXIF.tools