Trans Electric BTR315 Bluetooth music receiver User Manual RF BTR315 14 1268 QSG V1 EN ai

Trans Electric Co., Ltd. Bluetooth music receiver RF BTR315 14 1268 QSG V1 EN ai

Manual

• Lights blue when paired and connected to your Bluetooth device.• Blinks blue when not connected to your Bluetooth device.• Turns o when the receiver is turned o.Wirelessly stream music from your iPhone, iPad, or other Bluetooth-enabled device to your home stereo or other audio device.Package contents• Bluetooth Music Receiver • 6 ft. 3.5 mm stereo audio cable• AC/DC adapter • 3.5 mm jack to RCA stereo audio plug adapter• Quick Setup GuideFeatures• aptX® audio decoding: The highest Bluetooth stereo audio quality possible• Supports Near Field Communication (NFC) for easy connection with compatible Bluetooth devices• Optical digital audio output: The highest quality audio connection to your home stereo• Analog stereo audio output: Easily connect to amplied speakers or any device with an audio input jack• Wireless range up to 33 feet (10 m)• Wall mount feature• Remembers up to eight Bluetooth devicesNote: Music can be played from only one device at a time.Setting up your Bluetooth Music Receiver Connecting to an output deviceYou can choose either analog (good) or digital (best) cables to connect your Bluetooth Music Receiver, depending on the connections available on your home stereo system.Digital connectionUsing an optical digital audio cable (not included), connect your home stereo system to the OPTICAL jack on your Bluetooth Music Receiver. ORTo pair your devices using NFC Fast connection:Note: Check your Bluetooth device to see if it is compatible with NFC. If it is not, use the steps above to pair your Bluetooth device.1 Turn on your receiver by plugging in the AC/DC adapter and sliding the power switch to ON. The LED indicator blinks on and o slowly. Your receiver is in pairing mode.2 Turn on Bluetooth on your Bluetooth device. 3 Turn on the NFC function (see documentation that came with your NFC-enabled device). 4 Touch your Smartphone or tablet to the NFC logo ( ) on the top of your receiver, to pair with your Bluetooth Music Receiver. The LED indicator on the receiver lights blue. 5 When your Smartphone or tablet tells you that the receiver is connected, you can begin playback.6 To disconnect, touch your Smartphone or tablet to your Bluetooth Music Receiver again (see documentation that came with your NFC-enabled device). Notes:• Some devices, such as an iPhone, connect immediately after pairing so the LED on the Bluetooth Music Receiver remains on. Other devices, such as notebook computers, may ask you if you wish to connect. In this instance, the LED continues to blink until a connection is established.• Your Bluetooth Music Receiver saves pairing information for up to eight devices. However, it can only be connected to and play content from one device at a time.• When you turn on your Bluetooth Music Receiver, it automatically connects to the last connected device if that device is in range. To connect to a dierent paired device, you have to turn o Bluetooth or unpair from the currently paired device and manually connect to the other paired one.Analog connectionUsing the included 3.5 mm stereo audio cable, connect your home stereo system or other component to the AUDIO OUT jack on your Bluetooth Music Receiver. Note: If your home stereo system does not have a 3.5 mm Audio In connector, use the included 3.5 mm jack to RCA stereo audio plug adapter.Connecting power:1 Plug the AC/DC adapter into the DC 5V jack on your receiver.2 Plug the AC/DC adapter into a wall power outlet and slide the power switch to ON. The LED indicator begins to blink blue to indicate that the unit is on and ready to be paired to your Bluetooth devices.Pairing your devicesBefore you can use your Bluetooth Music Receiver with a Bluetooth device, you need to pair the two. Your receiver can connect to a Bluetooth-enabled device using the Bluetooth settings on your device or by touching your Bluetooth device to the Bluetooth Music Reciever using NFC.To pair your devices using Bluetooth settings:1 Make sure that a compatible Bluetooth device (like a music player or phone) is turned on and within 33 feet (10 meters) of your receiver.2 Turn on your receiver by plugging in the AC/DC adapter and sliding the power switch to ON. The LED indicator blinks on and o slowly. Your receiver is in pairing mode.3 Turn on Bluetooth on your Bluetooth device, then set it to pairing mode. For more information, see the documentation that came with your Bluetooth device. 4 On the Bluetooth device, select Music Receiver in the list of found devices.5 On the Bluetooth device, enter 0000 as the PIN, if prompted. The LED indicator lights blue on the receiver.6 If you are pairing with a computer, make sure that your Bluetooth Music Receiver is selected as the computer’s default playback device. See the computer’s documentation for instructions.LED indicator QUICK SETUP GUIDERF-BTR315 Bluetooth Music ReceiverFinal at size 254 mm x 177.8 mm (W x H)Final fold size 127 mm x 177.8 mm (W x H)Optical digital audio cable(not included) ORNFC logo6 ft 3.5 mm stereo audio cable3.5 mm jack to RCA stereo audio plug adapterAudio device (such as an audio receiver)Before using your new product, please read these instructions to prevent any damage.v1R3
Reconnecting your device:When your receiver is not paired to a device, the LED indicator will slowly blink on and o.Note: The auto connect feature may not work with some Bluetooth devices. If this occurs, use your Bluetooth device settings menu to manually select the Music Receiver from the list of found Bluetooth devices.LED statusV1 ENGLISH 14-1268TroubleshootingIndicationSolid blueBlinks blueODescriptionPaired and connected to your Bluetooth device.Not connected to your Bluetooth device.Turns o when the receiver is turned o.Legal noticesFCC caution:Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC statement:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no Your receiver loses the Bluetooth connection if you...To reconnect…Turn o your receiver Move the Bluetooth device out of rangeTurn o your Bluetooth deviceTurn o Bluetooth on your Bluetooth deviceConnect your Bluetooth device to another Bluetooth deviceTurn on your receiver. Your receiver searches for the last connected Bluetooth device and reconnects.Make sure your Bluetooth device is within 33 feet (10 meters) of your receiver.Turn on your Bluetooth device, then make sure Bluetooth is on.Turn on Bluetooth on your Bluetooth device.Disconnect your Bluetooth device from the other Bluetooth device, then set your device to pairing mode. Select Music Receiver on your Bluetooth device.• Make sure that your receiver power cord is connected to your receiver and a power outlet.• Make sure your receiver is turned on.• Make sure that your Bluetooth device turned on, Bluetooth is turned on, and Music Receiver is selected.• Turn up the volume on your audio device connected to your Bluetooth Music Receiver.• Turn up the volume on your Bluetooth device.• Make sure that your Bluetooth device is not muted.• Make sure that the cable connections are secure.• Make sure that your receiver is not paired to another Bluetooth device.• Make sure that your Bluetooth device is not paired to another Bluetooth device.No sound or low volume Cannot establish Bluetooth connectionNo powerProblem: Solutions:guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.RSS-Gen & RSS-210 statement:This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillageradioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.RSS-102 statement:This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôléOne-year limited warrantyVisit www.rocketshproducts.com for details.Contact Rocketsh:For customer service, please call 1-800-620-2790.www.rocketshproducts.comROCKETFISH is a trademark of Best Buy and its aliated companies.Registered in some countries. Distributed by Best Buy Purchasing, LLC7601 Penn Ave South, Richeld, MN 55423 U.S.A.©2014 Best Buy. All rights reserved.Made in China• Shorten the distance between your receiver and your Bluetooth device.• Turn your devices o, then on. Re-pair your receiver and your Bluetooth device.• Make sure that your receiver is not paired to another Bluetooth device.• Make sure that your receiver and Bluetooth device are both in pairing mode.• Make sure that your Bluetooth device is not connected to any other device.• Make sure that you have selected Music Receiver on your Bluetooth device.• Make sure your device has the NFC feature. See the device's documentation for instructions.• Make sure your Bluetooth device is turned on and Bluetooth is turned on.• Make sure your NFC device supports Bluetooth pairing with NFC. Some devices have NFC but may not support Bluetooth pairing with NFC.• Make sure the your Bluetooth device is turned on and the NFC function is turned on.• When connecting, touch your Bluetooth device to the NFC logo ( ) on the top of your Bluetooth Music Receiver. NFC paring does not workProblem: Solutions:My Bluetooth device keeps unpairingMy Bluetooth Music Receiver does not appear on my Bluetooth device• Shorten the distance between your receiver and your Bluetooth device.• If battery on your Bluetooth device is low, recharge the battery.• Shorten the distance between your receiver and your Bluetooth device.• Put your receiver into pairing mode, then refresh your list of Bluetooth devices. For more information, see the documentation that came with your Bluetooth device.

Navigation menu