Trans Electric DIR300 Digital Remote Control Extender User Manual 1

Trans Electric Co., Ltd. Digital Remote Control Extender 1

Contents

User Manual 1

DIGITAL REMOTE CONTROL EXTENDERMODEL :DIR-300 OWNERS MANUAL
LOCATION OF CONTROLS Transmitter Side Receiver Side DC Power DC Power IR Probe Transmitter and Receiver FrontInfrared Remote Control Antenna Remote Control Indicators & IR Transmitter/Receiver Accessory DC 12 V AC 120V or 230V Adaptor x2Infrared Extender X 3 1,1.5,2m in length1
CAUTION: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2
IMPORTANT SAFETY PRECAUTIONS To prevent fire or shock hazard, do not submerge or expose this product to water. To avoid electric shock, do not open the units. The DIR-300 contains no user serviceable parts. Doing so will void the warranty. Use only the power supply provided with the DIR-300 Do not overload wall outlets or extension cords. If you are experiencing difficulty with this product, do not attempt to service it yourself. Please call your vendor for assistance. Product Description The DIR-300 Wireless Infrared Remote Control Extender enables you to extend the range of your present Infrared Remote Control so that you can operate VCRs, stereos, Cable Converter, Satellite receivers, etc., virtually anywhere in the home. Applications The remote operation of electronics products that utilize IR (Infrared) remote control technology such as: Satellite Receivers Television VCR's (Video Cassette Recorders) CDs (Compact Disc) DVD's (Digital Video Disc) LDP's (Laser Disc Players) Cable Converter Boxes Audio / Hi-Fi Stereo Systems Wireless Video Sender Systems Any IR Remote Controlled Devices 3
APPLICATION DIAGRAM IR Signal RF Signal1. Stereo system with remote control: DIR-300 ReceiverWire to Extension Speaker Probe Stereo Wall IR Remote Control DIR-300 Transmitter2. DSS / Satellite Receiver with remote control: 2nd TV DSS or Satellite Receiver Wall DIR-300 Receiver IR Remote Control DIR-300 Transmitter4
Installation & Operation Guide Receiver Picture 1 Picture 2Working with extender probeAntenna Power Adaptor(Using IR ) Make sure the IR probe is affixed toward IR sensor receiving Window with proper position (within 0.5M and working angles +/- 15°). Keep Vertical Picture 3 Picture 4Working without extender probe Working without extender probeSide View 5.7 M 6 M 0.3Not less than 0.3M and not more than 6M Working Angle not more than +/- 15°Working Angle not more than +/- 15°5
Transmitter Picture 6 Picture 5 Working Angle not more than +/- 15° Antenna Power AdaptorKeep Vertical Remote Control Picture 7AntennaDistance Not less than 0.3M and not more than 5M Working Angle not more than +/- 15°6
Care and Maintenance Keep the DIR-300 Remote Extender dry. If it gets wet, wipe it dry immediately. Use and store the DIR-300 only in normal temperature environments. Extreme temperature can shorten the life of electronic devices Handle the DIR-300 gently and carefully. Dropping it can damage the circuit board and can cause it to work improperly. Keep the DIR-300 away from dust and dirt, which can cause premature wear of parts. Wipe the DIR-300 with a damp cloth occasionally to keep it looking new. Do not use harsh chemicals, cleaning solvents, or strong detergents.Specifications Operating Voltage !!!!!!!.110 VAC, 60Hz/230V 50Hz DC 12V, 250mA Power Consumption (pair)..............................!.....3 Watts Max Transmission Frequency........!!!!!.433.92MHz+/-1MHz Power Gain......................................................................10dBm Effective operating range.......................!...!!....about 100M (clear line of sight) 7

Navigation menu