Trans Electric IR520 Wireless Remote Extender User Manual

Trans Electric Co., Ltd. Wireless Remote Extender Users Manual

Users Manual

Download: Trans Electric IR520 Wireless Remote Extender User Manual
Mirror Download [FCC.gov]Trans Electric IR520 Wireless Remote Extender User Manual
Document ID528729
Application IDSUbdBFtBujDFLb5afLQfkQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize84.24kB (1052979 bits)
Date Submitted2005-04-01 00:00:00
Date Available2005-04-01 00:00:00
Creation Date2005-01-07 13:44:19
Producing SoftwareAdobe PDF library 6.66
Document Lastmod2005-03-30 14:51:32
Document TitleUsers Manual
Document CreatorIllustrator

1511951
WIRELESS
REMOTE EXTENDER
USER MANUAL
Product Description
The Wireless Remote Extender enables you to extend the range of your present
Infrared IR Remote Control up to 100 feet, so that you can operate VCRs, stereos,
Cable Converter, Satellite receivers, etc, virtually anywhere within your home.
Unlike ordinary remote controls which are only effective in close range,
“line of sight” use. The Wireless Remote Extender uses radio frequencies and
can operate through walls, doors, around corners, etc.
Applications
The Remote operation of electronic products that utilize IR
(Infrared) remote control technology are:
Televisions
VCR's (Video Cassette Recorders)
CD Players
DVD Players
LDP's (Laser Disc Players)
Cable Converter Boxes
Satellite Receivers
Audio / Hi-Fi Stereo Systems
Wireless Video Sender Systems
Any (IR) Remote Controlled Devices
Installation
Transmitter:
You will be using your normal IR remote control and “aiming” it at the
extender transmitter.
1. Plug the supplied AC adapter into any standard electrical wall outlet.
2. Connect the other end of the AC adapter cable in the “power in” socket
located on the side of your transmitter unit.
3. Place the transmitter in the remote location so that it is in the line of
sight of the position where you are located (couch, chair, bed, etc.) so
that you can “aim” your remote control at the transmitter.
Receiver / Probe:
1. Plug the supplied AC adapter into any standard electrical wall outlet.
2. Connect the other end of the AC adapter cable into the “power in”
socket located on the side of the receiver unit.
3. Place the receiver in a high, line-of-sight position facing the front of the
electronic device you are going to control. Be certain that there are no
obstructions between the receiver and the infrared receiving window of
the equipment.
4. In situations where it is not possible or convenient to place the receiver in
line-of-sight of the controlled equipment, a remote probe is supplied.
The remote probe enables you to place the receiver in a high location,
or near the equipment being controlled, and have the probe transmit the IR
data directly to the IR receiving window of the equipment.
Plug one end of the probe cable into the jack located on the side of the
receiver. Attach the other end of the probe to the IR receiving window of the
equipment being controlled using double stick tape attached to the probe.
INSTALLATION DIAGRAM
A. Stereo System:
IR Signal
RF Signal
Speaker Wire
Stereo
Receiver
IR Remote
Control
Wall
Transmitter
B. Stereo System with remote Probe:
Stereo
Speaker Wire
Receiver
Probe
IR Remote
Control
Wall
Transmitter
C. VCR / TV /Wireless Video System:
2.4GHz Wireless
Video Sender
VCR
2nd TV
TV
Receiver
Wall
Transmitter
D. VCR / TV /Wireless Video System with remote Probe:
2.4GHz Wireless
Video Sender
Receiver
VCR
2nd TV
Probe
TV
Wall
Transmitter
Care and Maintenance
Keep the IR Remote Extender dry. If it gets wet, wipe it dry immediately.
Use and store the IR Remote Extender only in normal temperature environments.
Extreme temperature can shorten the life of electronic devices.
Handle the IR Remote Extender gently and carefully. Dropping it can damage
the circuit board and can cause it to work improperly.
Keep the IR Remote Extender away from dust and dirt, which can cause
premature wear of parts.
Wipe the IR Remote Extender with a damp cloth occasionally to keep it looking
new. Do not use harsh chemicals, cleaning solvents, or strong detergents.
Specifications
Operating Voltage .......................................105-130 VAC, 60Hz
Power Consumption (pair)............................4 Watts Max
Transmission Frequency...............................418 MHz + / - 1 MHz
Interference
Your extender might cause TV or radio interference even when it is operating
properly. To determine whether your extender is causing the interference, turn off
your extender. If the interference goes away, your extender is causing it. Try to
eliminate the interference by:
• moving your extender away from the receiver
• connecting your extender to an outlet that is on a different electrical circuit from
the receiver
• contacting your local electronic store for help
If you cannot eliminate the interference, you may be required to stop using your
extender.
This device complies with PART 15 of the FCC rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
To comply with the FCC RF exposure compliance requirements, this device and its antenna
must not be co-located or operated in conjunction with any other antenna or transmitter.
LIMITED WARRANTY
Who is Providing This Warranty?
Are There Other Warranties?
•
•
There are no express warranties other than those
expressed herein. Neither the sales personnel nor
any other person is authorized to make any other
warranties or to extend the duration of any
warranties.
•
ANY IMPLIED WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY (AN
UNWRITTEN WARRANTY THAT A PRODUCT IS
FIT FOR ORDINARY USE), ARE LIMITED TO 90
DAYS. Some states do not allow limitations on how
long an implied warranty lasts, so the above
limitation may not apply to you.
Orbyx Electronics, LLC (“Orbyx”), as the distributor
of this Nexxtech™ product (your “Product”).
What Does This Warranty Cover?
•
This warranty covers defects in materials or
workmanship in your Product under normal use and
conditions.
What is the Period of Coverage?
•
This warranty covers your Product for 90 days from
the original purchase date.
Who Is Covered?
How Does State Law Apply?
•
•
This warranty covers the original consumer
purchaser. Coverage terminates if you sell or
otherwise transfer your Product.
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state.
What Will We Do To Correct Problems?
•
We will repair your Product or replace your Product
with a new or reconditioned equivalent product, at
our option.
How Do You Get Service?
•
Call Orbyx TOLL FREE at 1-866-363-3059 for
instructions for obtaining warranty service from
Orbyx’s authorized service providers.
•
Or, return your Product directly to the retail store
from which you purchased the Product.
•
When you obtain service for your Product, you must
provide a purchase receipt (or other proof of the
original purchase date) and a description of the
defect(s).
What Does This Warranty Not Cover?
•
This warranty DOES NOT COVER:
•
damage due to misuse, abuse, alteration,
unauthorized repair, or accident (such as improper
electrical current);
•
damage due to “acts of God” (such as lightning) or
other contingencies beyond our control;
•
cosmetic damage;
•
externally generated static, signal reception or
antenna problems not caused by your Product; or
batteries.
•
This warranty also DOES NOT COVER, and in no
case will we be liable for, any incidental damages
(such as transportation costs to and from an
authorized service provider, or loss of time) or
consequential damages (such as costs of repairing
or replacing other property which is damaged,
including tapes, discs, speakers not included with
your Product or other accessories, or external
electrical systems) resulting from the use of your
Product. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to
you.
•
Defacing the serial number, or using your Product for
commercial or institutional purposes, voids this
LIMITED WARRANTY
ORBYX ELECTRONICS WARRANTY
ORBYX Electronics warrants that this product will be free
from defects in materials and workmanship for a period of
ninety (90) days from the date of purchase. Within this
period, simply take the product and your proof of purchase
to any ORBYX Electronics store or dealer and the product
will be repaired without charge for parts and labour. ORBYX
Electronics reserves the right to charge for transportation.
Any product which has been subject to misuse or accidental
damage is excluded from this warranty.
This warranty is only applicable to a product purchased
through ORBYX Electronics' company owned stores and
dealers and to a product that is presented for repair in a
country where ORBYX Electronics offers the product for
sale. While this warranty does not confer any legal rights
other than those set out above, you may have additional
statutory rights which will vary under the laws of the various
countries, states, province and other governmental entities
in which ORBYX Electronics operates. This warranty is
subject to all statutory rights you may have in the country of
purchase.
Distributed exclusively in the U.S. by
Orbyx Electronics, LLC
501 South Cheryl Lane,
Walnut, CA 91789
Imported in Canada for/Importé au Canada pour
Orbyx Electronics,
Concord, Canada, L4K 4M3
Manufactured in China
For product support please contact www.orbyxelectronics.com or
1-866-363-3059
Limited Warranty/Garantie Limitée
U.S.A & Canada
© 2004 ORBYX Electronics. All Rights Reserved.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2005:03:30 14:51:32+08:00
Create Date                     : 2005:01:07 13:44:19-05:00
Creator                         : Illustrator
Producer                        : Adobe PDF library 6.66
Page Count                      : 7
For                             : janine,
Title                           : 1511951ENcover_manual.ai
Bounding Box                    : 15 149 198 277
Creator Version                 : 11
Container Version               : 9
Has XFA                         : No
About                           : uuid:2f28db5a-9626-11d9-9b15-001124341aa0
Mod Date                        : 2005:03:30 14:51:32+08:00
Creation Date                   : 2005:01:07 13:44:19-05:00
Metadata Date                   : 2005:03:30 14:51:32+08:00
Document ID                     : uuid:f5659b94-60db-11d9-889b-000d932d827c
Format                          : application/pdf
Image Height                    : 128
Image Width                     : 183
Image Size                      : 183x128
Megapixels                      : 0.023
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BY4IR520

Navigation menu