Trans Electric WFD1000 Wireless Display Receiver, Miracast Wireless Adapter User Manual R5017 01G WFD 1000 manual 20130918 for w WFCC

Download:
Mirror Download [FCC.gov]
Document ID	2113595
Application ID	N0fEralpL4NcargeqO9ZZg==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	102.73kB (1284081 bits)
Date Submitted	2013-11-07 00:00:00
Date Available	2013-11-07 00:00:00
Creation Date	2013-11-06 11:48:57
Producing Software	GPL Ghostscript 9.04
Document Lastmod	2013-11-06 13:20:20
Document Title	(R5017-01G_WFD-1000_manual_20130918 for ?w?WFCC)
Document Creator	PDFCreator Version 1.2.3
Document Author:	pho

Wireless Display Receiver
Smartphone(Android 4.2) to HDMI
Model: WFD-1000
INTRODUCTION
Congratulations on your purchase of the WFD-1000 Wireless Display
Receiver. Your satisfaction is very important to us.
The WFD-1000 allows you to send image or video on your Smartphone to a
HDTV. Anything shows on the Smartphone will also show on the HDTV.
WFD-1000 now supports Miracast™ Wireless Display. You can launch the
wireless display application on a Miracast™-compatible Smartphone, tablet.
FEATURES
For the best performance of this Wireless Display Receiver, please read this
manual carefully and keep it for further information.
Features:
Wireless to HDMI Conversion (Smartphone to HDTV)
Mirroring display from Smartphone to HDTV
Up to 1080P/30fps
Support HDMI 1.3 output and HDCP 2.0
Micro USB powering
CONTENTS
Content of Package
WFD-1000 main unit
USB Power Cable
User’s manual
CONNECTION ILLUSTRATION
Connection step
(1) Connect HDMI cable from HDMI output to HDTV.
(2) Connect USB Power cable (attached) the micro USB end to the power
port of WFD-1000 and the USB A to the USB port of TV, Set Top Box or
power adapter with USB A port.
The LED of WFD-1000 will light on, but at this moment WFD-1000 is not
connected to your Smartphone yet.
WFD-1000
HDMI Cable
30 feet
USB Cable
HDTV
(3) Turn on your HDTV TV and select the correct HDMI input.
Note:
If you do not see this screen, make sure that the HDMI input of HDTV is set to
the HDMI port where the WFD-1000 is connected and all cable connections are
secured firmly.
PAIRING YOUR WFD-1000
EX: Samsung™ Galaxy S3 (support AllShare™ Cast)
1. Tap on the “Settings” of your Smartphone and make sure that the android
version of your phone is upgraded to the Android version 4.1.2 or above . (If
your android version of Samsung Smartphone is 4.1.2 or above,
AllShare™ Cast is built in and workable with WFD-1000)
Tap on the Setting and go to “More settings”, then select “AllShare Cast”. And
You can find the available devices name: AV Receiver-XXXXXX.
2. Select the available devices _ AV Receiver-XXXXXX and press the pairing
button on the front of WFD-1000 for 2 seconds.
3. When the pairing is finished successfully. You will see the Screen of
Smartphone on your HDTV.
Note:
1. Owing to the generic version of android, Miracast is supported in
version 4.2.0 and above. So if your Smartphone can not connect to
WFD-1000, Please check the version is correct (4.2.0 and above). If the
version is not the right version (4.2.0 or above), you are encouraged to
ask or wait the device vendors to release the new O.S to support
Miracast.
2. The effective range of WFD-1000 is 30 feet (L.O.S), if WiFi signal in your
area is too strong or too crowded, the distance and the quality of Picture
quality will decrease.
3. If you want to set to factory default, please press pairing button for 20
seconds.
ATTENTIONS
1. Not all Smartphone can support WiFi Miracast™. Please make sure the
Smartphone that you try to use with WFD-1000 can support Screen
output.
2. Some Smartphone(Android 4.1.2) may not support Miracast™ function.
When you try to upgrade the O.S. to the Smartphone, Please make sure
the Smartphone vender that they have been released the function or not.
3. If the USB port on HDTV can not supply enough power, please connect to
the USB port of HDTV which is for hard drive connection OR use the
Smartphone's power adaptor for powering.
TROUBLE SHOOTING
1. When there is no picture presented, please:
Check if the HDMI cable is high speed supported. (For resolution up to
1080p high speed HDMI cable is required.)
Check all the connections are correct and connected well.
Check the quality of connected HDMI cable, and make sure the cable
does not damage.
2. When use the Smartphone to pairing, it is not function?
The Smartphone may not support Miracast™ function.
Some Android O.S may not support Miracast™ function well. You may
provide feedback to the Smartphone vender.
3. When there is only picture displayed and without sound:
Check the volume of the phone; make sure the volume setting is right.
Check all the connection is correct and connected well.
Check your cable is damaged or not.
NOTICE
Manufacturer reserves the right to make changes in the hardware, packaging
and any accompanying documentation without prior written notice.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
WiFi Certified Miracast™ Logo are trademarks of WiFi Alliance
AllShare™ Cast is Media function of Samsung Galaxy series.
Trademarks and brand names are the properties of their respective owners.
FCC Statement
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator & your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2013:11:06 11:48:57+08:00
Creator Tool                    : PDFCreator Version 1.2.3
Modify Date                     : 2013:11:06 13:20:20+08:00
Metadata Date                   : 2013:11:06 13:20:20+08:00
Format                          : application/pdf
Description                     : 
Creator                         : pho
Title                           : (R5017-01G_WFD-1000_manual_20130918 for ?w?WFCC)
Keywords                        : 
Producer                        : GPL Ghostscript 9.04
Document ID                     : uuid:b94d60a4-d048-4149-b84b-c8a4890c405e
Instance ID                     : uuid:1052781f-e435-4546-8201-858d240e3fdc
Page Count                      : 9
Subject                         : 
Author                          : pho

EXIF Metadata provided by EXIF.tools