TransCore 05946 Location Monitoring Services Transmitter User Manual

TransCore Location Monitoring Services Transmitter

a href="https://usermanual.wiki/TransCore" itemprop="url"> TransCore >

User Manual

Trusted Transportation SolutionsPocketPass™Installation Instructions16-0042-001 Rev A2PocketPass is designed for mounting to a vehicle's interior windshield surface using 3M™ Dual Lock™ strips. This mounting method provide for easy mounting and removal when portability is needed.General Installation InformationMetallized WindshieldsSome vehicle windshields contain a metallic treatment that could prevent an interior windshield-mounted device from working correctly. If you have a vehicle with a metalized windshield, contact your local customer service center for more information. If your vehicle’s metalized windshield has a metal-free zone, it is typically located near the rearview mirror.Required Supplies•  PocketPass•  Commercial glass cleaner and paper towelsPocketPass Installation and Removal ProceduresInstalling the PocketPass with Dual Lock Strips1.  Choose the location for your PocketPass (Figure 1). It should be mounted as close to the bottom center of the windshield as possible; at least 3 inches away from the windshield frame or dashboard, and not behind the windshield wipers.Figure 1  –
Page 2Installation Instructions2.  Clean and dry the interior windshield surface completely before axing the Dual Lock strips. The windshield temperature must be at least 68ºF (20ºC) for optimum bonding.3.  Peel the backing o the Dual Lock strips (Figure 2). Leave both sides of the Dual Lock strips pressed together to ensure the strips will align between the tag and windshield. Apply the PocketPass to the windshield using moderate pressure.Figure 2  – Note: When installing the PocketPass using Dual Lock strips for the first time, leave it in place for at least 24 hours to allow the adhesive to cure.4.  To remove a PocketPass mounted with Dual Lock strips from the windshield, grip the case at the top and bottom sides. Gently lift the PocketPass away from the windshield on one end until the tag is free from the windshield.User Replaceable BatteriesTwo AAA batteries are pre-installed in your PocketPass. TransCore recommends Energizer® Advanced Lithium AAA batteries for use in the PocketPass. To replace the batteries, remove the tag from the windshield as described in Step 4 on page 2. 1.  Hold the tag with the LED side facing down. Locate the battery door. Press the indentation located under the arrow and slide the door in the direction of the arrow to open the door.
Download:
Mirror Download [FCC.gov]
Document ID2774361
Application ID1Cgny/KowAUlZuQSUJ0XEA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize80.66kB (1008224 bits)
Date Submitted2015-10-07 00:00:00
Date Available2016-04-04 00:00:00
Creation Date2015-09-08 10:43:58
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2015-09-08 10:44:02
Document TitleUser Manual
Document CreatorAdobe InDesign CC 2015 (Windows)
FCC ID Filing: FIH05946

Navigation menu