Transact Campus PS4100X005 Card Reader User Manual 1290 PS4100 InstallGuide

Blackboard Inc. Card Reader 1290 PS4100 InstallGuide

User Manual

DRAFTPS4100Installation Guide
DRAFTPS4100 INSTALLATION GUIDEDOCUMENT 1290 REV 01PRINTED N OVEMBER 24, 2009 1-1This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This devicemay not cause harmful interference, and (2) this device must accept any interference received, including interference thatmay cause undesired operation. Part 15.21: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authorityto operate the equipment.NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.Such modifications could void the user’s authority to operate the equipment.This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow thespecific operating instructions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed toprovide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any otherantenna or transmitter.This Class B digital apparatus complies with Canadian ICES-003Cet appareill numérique de la classes B est conform à la norme NMB-003 du CanadaBlackboard Inc. PS4100Tested To C o m p l yWith FCC StandardsFOR HOME OR OFFICE USE
DRAFTPS4100 INSTALLATION GUIDEPRINTED N OVEMBER 24, 2009 1-2PS4100 INSTALLATION GUIDEFigure 1-1 PS4100 Card ReaderPrerequisites:• POS terminal (BbTS 3.6 image)• Available USB port on the POS terminalOBJECTIVESAfter reading this guide you can:• Install the PS4100 Reader Stand • Install the PS4100 Reader
DRAFTPS4100 INSTALLATION GUIDEDOCUMENT 1290 REV 01PRINTED N OVEMBER 24, 2009 1-3INSTALL THE PS4100 STANDTo Install the PS4100 stand1Locate the Key Hole Pins on the stand, and the Keyholes on the back of the reader.Figure 1-2 Key Hole Pins and Keyholes2Align the reader Keyholes with the stand Key Pins, and then push in the direction shown.Figure 1-3 Reader and Stand Alignment3Push down to lock.
DRAFTINSTALL THE PS4100 READERPRINTED N OVEMBER 24, 2009 1-4INSTALL THE PS4100 READERThe PS4100 reader driver is pre-configured in the POS image, configuration is not required.The PS4100 reader uses a modulated magnetic field for reading contactless cards. Avoid operating the PS4100 within 2 feet of sensitive electrical equipment.To install the PS4100 reader1Connect the PS4100 USB cable into an available USB port on the POS terminal.Allow the POS terminal to recognize the new hardware.2To start using the reader, tap a Blackboard FeliCa card on the reader.Table 1-1: PS4100 LED ReferenceLED Color DescriptionGreen Valid card, the valid tone sounds.Red Denied, the invalid tone sounds.White (Blackboard logo)Power is present to the reader.
DRAFTSPECIFICATIONSPRINTED N OVEMBER 24, 2009 1-5SPECIFICATIONSPhysical Size: Dimensions: 2.25” W x 4.5” H x 1.2” DWeight: 0.25 lbsInput Power: 5VDC 150mA, 1.8 Watts MaximumOperating: Temperature: 0 to 60+ degrees CelsiusRelative Humidity: 0 to 95 percent, non-condensingAltitude: 0 - 10,000 feetNon-Operating: Temperature: -20 to +70 degrees CelsiusRelative Humidity: 0 to 95 percent, non-condensingAltitude: 0 - 35,000 feetThis device contains an integrated lithium battery (BR2032). There is a risk of fire if the battery is replaced with an incorrect type. Proper disposal of a used battery is essential.

Navigation menu