Tranwo Technology IPCAM-RFPIR RF_PIR Sensor / PIR Sensor_RF User Manual 410 000090 00 QC

Tranwo Technology Corp RF_PIR Sensor / PIR Sensor_RF 410 000090 00 QC

User manual

2Less than 50cm12. Name : Sensor Name3. : Search this sensor. If searched, the sensor LED will flash five times. 4. Alarm On/Off : “Alarm On ” will enable you to receive push message when PIR sensor event is triggered. The interval between checks is 1 minute.5. : The camera will rotate to a preset position when “Alarm On” and PIR sensor event is triggered. Through live view window to position the camera and tap “Locate” to confirm.1. No. : Sensor Number. Tap it to select other sensor. (No. 0,1,2….) Sensor Setting31243511Step1: Battery On1. Remove the back cover.2. Install three AAA batteries.Step2: Sensor Pairing1. Turn on camera and launch “iSmart-CAM” APP. Go to “Camera Setting” and tap ”IoT Sensor Setting”.2. Tap the then hold the pairing button for 3 seconds within 5 seconds.3. The sensor type will be displayed after paring completed.4. Tap the “RIR Sensor” for detailed settings. Note: If pairing successfully, the LED will light up for 3 seconds. If failed, the LED will blink.EN Pairing Button2. LED Light3. PIR Sensor1. Product Layout 1 Quick Setup2123RF_PIRRF_PIR Sensor Installation GuideManuel de l'utilisateurGuía de instalaciónInstallationsanleitungGuida all'installazione31 Placement41- Modulation: GFSK- Dimensions: 64x44x24 mm- Weight: 21.5 g- Detect Distance: 3~5m- Coverage Angle: 110°- Operating Distance: 30m* (indoor)- Power Supply: 4.5V (AAAx3)- Battery Life: 1 year* (Triggered twenty times a day)- Operating Temperature: *Actual operating distance and battery life may vary with the usage patterns and operating environment.- Frequency: 2.4G HzRF 0℃ ~ 40℃ (32℉ ~ 104℉) Specification52 m (Approx.) Note: 1. Avoid facing to glass windows/doors. 2. Avoid facing to heat/cold sources. 3. Avoid facing swing objects.410-000090-00FCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.

Navigation menu