Tranwo Technology IPCAM-RFTHS RF_Temp. & Humidity Sensor / Temp. & Humidity Sensor_RF User Manual 410 000091 00 QC

Tranwo Technology Corp RF_Temp. & Humidity Sensor / Temp. & Humidity Sensor_RF 410 000091 00 QC

Users Manual

2Less than 50cm12. Name : Sensor Name3. : Search this sensor. If searched, the sensor LED will flash five times. 4. Alarm On/Off : “Alarm On ” will enable you to receive push message when Temp. & Humidity sensor event is triggered. The interval between checks is 1 minute. a. Temp. Set the value of temperature threshold for alarm. b. Humidity Set the value of humidity threshold for alarm.1. No. : Sensor Number. Tap it to select other sensor. (No. 0,1,2….) Sensor Setting31243RF_THSRF_Temp. & Humidity Sensor Installation GuideManuel de l'utilisateurGuía de instalaciónInstallationsanleitungGuida all'installazione1Step1: Battery On1. Remove the back cover.2. Install three AAA batteries.Step2: Sensor Pairing1. Turn on camera and launch “iSmart-CAM” APP. Go to “Camera Setting” and tap ”IoT Sensor Setting”.2. Tap the then hold the pairing button for 3 seconds within 5 seconds.3. The sensor type will be displayed after paring completed.4. Tap the “Temp. & Humidity Sensor” for detailed settings. Note: If pairing successfully, the LED will light up for 3 seconds. If failed, the LED will blink.12EN Pairing Button2. LED Light3. Temp. & Humidity Sensor1.3 Product Layout 131- Modulation: GFSK- Dimensions: 64x44x24 mm- Weight: 20.5 g- Operating Distance: 30m* (indoor)- Power Supply: 4.5V (AAAx3)- Battery Life: 8 months*- Thermal Range: 0℃~50℃- Humidity Range: 20％~90％ RH*Actual operating distance and battery life may vary with the usage patterns and operating environment.- Frequency: 2.4G HzRF Specification4410-000091-00FCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.

Navigation menu