Tranwo Technology TTA-AB5805R 5.8 GHz Wireless Audio/Video Sender User Manual manual A5805 408 000638 00

Download:
Mirror Download [FCC.gov]
Document ID	1394670
Application ID	YSl+RKqamZMcNSuqsv5EXw==
Document Description	User manual 1 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.12kB (676532 bits)
Date Submitted	2010-12-22 00:00:00
Date Available	2010-12-22 00:00:00
Creation Date	2010-11-30 08:45:54
Producing Software	Corel PDF Engine Version 3.0.0.667
Document Lastmod	2010-11-30 08:45:54
Document Title	manual A5805 408-000638-00
Document Creator	CorelDRAW
Document Author:	user

5.8 GHz Wireless
Audio/Video Sender
Contents
1.Important Safety Information.......................................1
2.Package Content........................................................2
3.Panel Control And Function......................................... 3
4.Setup Guide...............................................................4
5.Orient Transmitter/Receiver for optimal performance.....5
1.Important Safety Information
To prevent fire or shock hazard, do not expose this product to rain and
moisture. For example: do not use near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or nearby a swimming pool. To
avoid electric shock, do not take apart this product, provided as an
accessory. This product should be operated only under power supply.
Do not overload wall outlets and extension outlets as this can result in
the risk of fire or electric shock.
FCC Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note:
This equipment has been tested and found to comply with the limits regulated
by FCC and CE. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction, may cause harmful interference to
radio communications. The change or modifcations not expressly approved by
the party responsible for compliance could void the user’s authority to operate
the equipment. To comply with the FCC RF exposure compliance requirements,
no change to the antenna or the device is permitted. Any change to the antenna
or the device could result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device.
Industry Canada Statement
This device complies with RSS-210 of Industry Canada. Operation is subject
to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
2.Package Contents
Check to make sure that all units shown as below are enclosed.
If something missed, please contact your dealer.
1. 5.8GHz Transmitter x 1
2. 5.8GHz Receiver x 1
UHF:433.92MHz
3. IR Cable LED x 1
4. Power Adapters
(9V/ 500mA) x 2
5. Cables x 2
EUROPE Type
EUROPE Type(SCART Cable)
USA Type
USA Type(RCA Cable)
2.Package
3.Panel
Control
Contents
and Function
Transmitter/Receiver
ID Code
ON
ON
ON
ON
123
123
123
123
ID 5
ID 6
ID 7
ID 8
ON
ON
ON
ON
123
123
123
123
ID 1
ID 2
ID 3
ID 4
ON
123
1. UHF Antenna
2. ON/OFF Switch
3. Power Indicator/IR Windows
4. IR mouse jack (transmitter only)
Channel selection button to find optimal reception (receiver only)
5. Power Adapter Jack
6. DIP switch for ID code, the transmitter and receiver
must to be configured as the same ID code.
7. A/V Jack
Note:
To eliminate static or unclear pictures caused by improper
installation, please check the power of transmitter is already on,
then turn off receiver power, press still on the channel selection
button of receiver until you have turned on receiver power again.
2.Package
4.Setup
Guide
Contents
To enjoy a life of wireless video and audio, just connect the
transmitter to whatever A/V source you like and connect the
receiver to a TV, monitor or speaker in another location.
2.Package
Not
e: Mak e su reContents
the ON/ OFF swi tch is in the 「OFF 」pos ition bef or e co nne ct ion
Transmitter
1. Connect one end of the RCA cable
(or scart cable) to the audio and video
jacks, and connect the other end to a
source device as well.
Transmitter
2. Connect the DC plug of the adapter
to the DC jack, and connect the power
supply to an outlet.
IR cable LED
3. Keep the IR window oriented toward
the source AV equipment, or
alternatively use the IR Mouse to
remotely control it.
Receiver
OUT
To AV Equipment
1. Connect one end of the RCA cable
(or scart cable) to the audio and video
jacks, and connect the other end to a
TV (or monitor, speakers) on which
you like to enjoy a program.
2. Connect the DC plug of the adapter
to the DC jack, and connect the power
supply to an outlet.
Remote
Controller
Receiver
3. Keep the IR window oriented toward
your remote controller.
* A complete set-up procedure consists of:
1. Press “CH” button on receiver, receiver
will make transmitter switch to the same
channel.
2. Make sure the ID on transmitter and
receiver is identical (For example, as exhibit
ON
Transmitter:
123
ON
Receiver:
123
ID 1
IN
To TV
ID 1
whenever there is problem with installation, please implement the set-up
procedure again.
5.Orient Transmitter/Receiver for optimal performance
For optimal performance, both the audio/video and remote
control antennas should be carefully oriented as described
below. For maximum transmitting range, try to minimize
obstacles (e.g. your TV or other electronics, large furniture)
where between the transmitter and receiver.
Orients the 5.8GHz A/V Antennas
The system delivers high-quality
audio and video by using directional
antennas, which must be oriented
to get the best results.
The antennas are designed to
be able to rotate in almost any
direction.
5.8GHz Antenna
Transmitter
5.8GHz Antenna
Receiver
Fig. 1
In most situations, the convex
of the antennas on both the
transmitter and receiver should be facing one another and
perpendicular (at a right angle) to an imaginary line drawn
between the two units. Two examples are shown as Fig.1,
Fig.2. Since all homes are different, for optimal reception,
additional alignment may be necessary.
If the transmitter and receiver are less than 10 feet apart,
suggest to lie the antennas on their casings since the distance
is so short.
5.8GHz Antenna
5.8GHz Antenna
Receiver
Transmitter
Fig. 2
Orients the UHF Antennas
In order to obtain optimal performance of the remote control
extender, the remote control antennas should also be oriented
at a right angle to an imaginary line drawn between the
transmitter and receiver.
If your remote control extender is not working satisfactorily,
rotate the remote control antenna on either the transmitter or
receiver 90 degrees so that it is still perpendicular to the path
between the units.(See Fig.3)
IF you notice improved performance, keep this orientation.
Rotating the antenna on both units should have no effect.
UHF Antenna
UHF Antenna
Transmitter
Fig. 3
Receiver
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should
not be treated as household or general waste. It
should be handed over to the applicable collection
point for the recycling of electrical and electronic
equipment, or returned to the supplier for disposal.
TTA-A5805T
TTA-A5805R
This equipment is intended to be
operated in below countries.
408-000638-00

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 8
Create Date                     : D:20101130084554
Modify Date                     : D:20101130084554
Producer                        : Corel PDF Engine Version 3.0.0.667
Author                          : user
Creator                         : CorelDRAW
Title                           : manual A5805 408-000638-00

EXIF Metadata provided by EXIF.tools