Tranwo Technology TTD-47T Digital Wireless USB Camera User Manual D4752B manual 2 3 FCC preliminary

Tranwo Technology Corp Digital Wireless USB Camera D4752B manual 2 3 FCC preliminary

Users Manual

2.4 GHz Digital Wireless USB CameraUser's ManualPreliminary Version 2.3
Contents1 Package Content2 Product Layout USB Receiver Camera3 PC System Requirements4 Camera Setup 4.1 Power Supply 4.2 Fine Tuning 4.3 Night Light / Night Vision5 Receiver Setup 5.1 Windows Detect & Install New Device 5.2 Driver Installation 5.3 Skype Resident Program Installation 5.4 Monitoring Software 5.5 Pairing 6 Details on the Skype Resident Program Installation7 Troubleshooting8 Care and Maintenance9 Specifications2.4 GHz Digital Wireless USB Camera
ENGLISH113456782MICLight9101112341. Package Content One Camera One USB Receiver One Power Adapter CD-ROM This User's Manual2. Product Layout USB Receiver 1. Antenna 2. Camera indicator LEDs 3. Camera switch / Pairing button* 4. USB plug Note: For Pairing, see section 5.5 Camera 1. Antenna 2. Power indicator LED 3. Infrared LEDs 4. Lens 5. Supporting stand 6. Night-light / IR control / pairing button 7. Night-light 8. Microphone 9. Battery compartment 10. Power ON / OFF switch 11. Power adapter socket3. PC System Requirements Windows XP(SP2 or higher) or Windows Vista Skype 3.0 or higher R RR
2 Pentium-IV 1.6GHz or higher (recommended) 256 MB RAM of system memory or higher (recommended) One available USB port (preferably USB2.0) Graphics Card (Must support DirectX 9.0c) Sound Card (AC97 compatible sound card) 1GB Free HD Space CD-ROM Drive (For software installation) 4. Camera Setup 4.1 Power Supply The camera uses either 4 AAA-Size batteries (alkaline battery recommended) or the household AC power current. Loading the Batteries 1. 2. Open the battery compartment cover. 3. Insert 4 AAA-size batteries (follow the plus (+) and minus (-) signs inside the battery compartment). 4. Close the battery compartment cover, and make sure it is locked securely. Note 1: Do not mix old batteries with new ones. Note 2: Remove the batteries from the camera if you do not plan to use it for a prolonged period of time. 5. Slide the POWER switch to the ON position. The LED on the camera will light up (red light). Note : When battery power is sufficient, the light is constantly red ; .Loosen the screw on the bottom of the camera by using a screw driver. when the battery is low, the LED light will start blinking342211ENGLISH
3ONOFF 213 Using AC Power 1. Plug one end of the provided power adapter into a wall outlet and the other end into the bottom of the camera. Note: Use the adapter labeled OUTPUT: 6V DC with the camera. 2. Slide the ON/OFF switch to the ON position. The LED on the camera will light up (red light). 4.2 Fine Tuning Place the camera in a convenient location, point the lens towards the observation area and adjust the angle by rotating the lens head. 4.3 Night Light / Night Vision Press the night light button, the night light LEDs will remain ON. The camera has nine high-intensity infrared LEDs for picking up clear images in unlit locations. Note: Press the night light button, the image changes automatically into the night vision mode.5. Receiver Setup There are 2 CD disks in the package, Disk 1: USB driver software / Skype resident program software, Disk 2: AP monitoring software. Please follow the steps below to setup USB receiver.LightMICLightENGLISH
4Driver Installation 5.1 Windows detect & install new device Make sure the OS of PC is Windows XP and the version is above (or equal) SP2. (Windows Vista is allowable). 1. Insert the USB Receiver into one USB port of PC and the "Found New Hardware wizard" screen will appear. Note: If the device has been searched and the screen isn't showed, please follow 5.2-2. 2. Choose "Install the software auto matically(Recommended)" in this screen and click "Next". (The wizard will detect & install the device automatically.) 3. Click "Finish" to complete the device installation. Note: In order to let the USB receiver get the best function, we propose strongly to consult the figure while you are operating. 5.2 Driver installation (Disk 1) 1. Insert the provided CD-ROM into your CD-ROM drive of PC and access to D:\Driver\ (Where D is the letter of your CD-ROM drive). 2. Double-click the execution file named "RFVideoClassUSB20PCCam_ v5.8.5003.X.exe" and the "Welcome to the InstallShield Wizard for USB Video Device" screen will appear. 3. Follow the steps and click"Finish" to complete the driver installation. 4. Restart the computer, you can use the USB Receiver correctly now. Note 1: When the USB driver is well installed and the USB Receiver plug in the computer, you can find icon on the task tray. If the USB Receiver unplug from the computer, the icon displays with a cross mark . ENGLISHReceiver
5 5.3 Skype resident program installation (Disk 1) You can watch senior citizen or disabled people through Skype from remote location. 1. Please download and setup Skype software from www.skype.com (free software). 2. Insert the provided CD-ROM into your CD-ROM drive of PC and access to D:\RemoteMonitor-Skype\ (Where D is the letter of your CD-ROM drive). 3. Double-click the execution file named "rm_e_s.exe" and the "Welcome to the Remote Monitoring Setup Wizard" screen will appear. 4. Follow the steps and click"Finish" to complete the driver installation. Note: For further details on the "Skype resident program installation", see the following section 6 . 5.4 Monitoring Software (Disk 2) For further details on the "Monitoring software installation", please consult the manual file in the monitoring software disk . 5.5 Pairing If you have trouble with your USB camera, try the following section 7, or try the following steps: 1. Make sure the camera is turned on, the power LED of the camera is red. 2. Press and hold the Pairing Button on the side of the receiver for about 2 seconds, the LED light will start blinking for about 5 seconds. 3. Press the night light button on the camera during the LED light of the receiver is blinking. When the night light on the camera flash three times, please release the button. 4. The pairing is finished. ENGLISHMICLight
66. Details on the Skype Resident Program Installation 6.1 Permit remote monitoring program to access Skype At the first launch of Remote Monitoring program, Skype displays a pop-up message asking allow Remote Monitoring program to access Skype. Please click Allow access button to permit Remote Monitoring program to connect to Skype. In case if you click Deny access button, or forgot to click Allow access button, you can enable Remote Monitoring program to access Skype by following steps below. 1. Select Skype's menu command Tools Options to open the Options dialog box. 2. In the Options dialog box, go to the Advanced tab, click the link "Manage other program's access to Skype" to open the Manage API Access Control dialog box. ENGLISH
7 3. In the Manage API Access Control dialog box, find program name "SWatch.exe". If the program's state is "Not allowed to use Skype", click Change button. 4. In the dialog box, select the option "Allow this program to use Skype ", and then click OK button to close the dialog box. 5. Click Save button to close the Options dialog box and confirm the setting change. 6.2 Remote monitoring program operation Three states of program icon When the Remote Monitoring program is well installed and launched, you can find its program icon on the task tray . If the camera's USB dongle unplug from the computer, the program icon displays with a cross mark . When the Remote Monitoring function is enabled, the program icon displays with a check mark . Remote Monitoring setting In the Remote Monitoring tab, you can enable/disable remote monitoring function, change password, set the waiting length to answer a call, and sound off speaker when auto-answer a call.ENGLISH
8 3. Change password The password is used for verifying the identity before sending Skype video. The default password is "123'. You can click Change password button to open Password dialog box to change the password string. 4. Speak sound off while remote monitoring camera video Sound off speaker during sending Skype video. The function is useful if you don't want to get attention during watching camera video remotely. 6.3 Interact with Skype to watch camera remotely You can set up camera to monitor secure area remotely. Setup camera 1. Turn on the computer and make sure the USB receiver plugged to the computer securely. Adjust the camera view to watch the security area. 1. Enable automatic-answering Skype incoming calls and start Skype video sending Check the option to enable the function of Remote Monitoring. Remote Monitoring program will auto-answer Skype calls and ask for a password to start sending Skype video. 2. Incoming call ringing period before asking password Specify the time length to wait to answer an incoming call. The waiting length can be from 0 to 30 seconds. ENGLISH
9 2. Run Skype program and the Remote Monitoring program. 3. Enable the remote monitoring function of Remote Monitoring program. Watch camera video remotely 1. Make a Skype call to the name that hosts the Skype on the computer with camera monitoring the security area. 2. After several ringing, the call will be answered with a chat message asking for a password. 3. If the password you enter is not correct, a chat message will ask you to enter password again. 4. When the password gets passed, the remote came video will display. 5. You can enter commands in Skype chat box to switch cameras, turn on/off Infra-red lights. If the command is correct and accepted, a message "Command received!" will be returned. ENGLISH
10 Note: The "LED" means the infrared light of the indoor camera. See the figureThe following table lists the available commands and their descriptions. The following table lists the available commands are for indoor camera only. *Command Description CAM1 CAM2 CAM3 CAM4 LED ON* LED OFF* LED AUTO* LED MANUAL* Display the video of camera 1Display the video of camera 2Display the video of camera 3 Display the video of camera 4 Turn on the infra-red light Turn off the infra-red lightSet the infra-red light to auto-mode. The infra-red light turns on if the lighting condition is not good Set the infra-red light to manual mode LEDs 7. Troubleshooting You don't get a signal at all Make sure the camera and the computer are turned on. Make sure the power plugs are pushed all the way in. If the camera is powered by batteries, replace all batteries with new ones. If the signal is poor, or there is interference Make sure the camera and the USB receiver are within range of each other (range of approximately 450 feet; 150 meters in a clear line of sight). ENGLISH
118. Care and Maintenance Keep all parts and accessories out of children's reach. Fingerprints or dirt on the lens surface can adversely affect camera performances. Avoid touching the lens surface with your fingers. Should the lens become dirty, use a blower to blow off dirt and dust, or a soft, dry cloth to wipe off the lens. Keep the camera dry. Precipitation, humidity, and other liquids contain minerals will corrode electronic circuits. Do not use or store in dusty, dirty areas. Do not store in hot areas. High temperatures can shorten the life of electronic devices and warp or melt certain plastics. Do not store in very cold areas. When the system warms up (to its normal temperature), moisture can form inside the case, which may damage electronic circuit boards. Do not attempt to open the case. Non-expert handling of the device may damage the system. Avoid dropping or strong shocks. Operate this product using only with the power supply included or provided as an accessory. Do not overload electrical outlets or extension cords this can result in fire or electric shocks. 9. SpecificationsSpecifications subject to change without noticeCameraFrequencyAntennaTransmission distanceModulationImage SensorLensIR LEDDimensionsWeightPowerOperating temperatureReceiverFrequency 2.4 GHzAntennas Mono-pole antennaModulation GFSK, FHSSDimensions 3.1(W) x1(H) x 8.4(D) cmWeight 16gPower USB portOperating temperature 0 ~ 40 (32 ~ 104 )2.4 GHzMono-pole antenna150 M (Line of Sight)GFSK, FHSSColor CMOS image sensorf 3.0mm, F 2.49 pcs8.4(W) x 12.4(H) x 6.1(D) cm 175gDC 6V, 800mA or 4 AAA alkaline batteries0 ~ 40 (32 ~ 104 )0413This device is for indoor use onlyENGLISH
12FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antennaIncrease the separation between the equipment and receiverConnect the equipment into an outlet on a circuit different from that to which the receiver is connectedConsult the dealer or an experienced radio/TV technician for helpFCC Label Compliance Statement:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.Trademarks Microsoft and Windows are registered trademarks of the U.S. Microsoft Corporation in the United States and other countries. Skype is trademark or registered trademark of Skype limited. In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the or marks are not used in all cases in this manual.ENGLISHRTMCaution:1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons.2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

Navigation menu