Tranzeo Wireless Technologies TR-6019 WIRELESS NETWORKING DEVICE User Manual TR 6000 Quickstart Guide
Tranzeo Wireless Technologies, Inc WIRELESS NETWORKING DEVICE TR 6000 Quickstart Guide
Contents
- 1. USERS MANUAL 1
- 2. USERS MANUAL 2
USERS MANUAL 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 526334 |
| Application ID | 0UoK6RB8CH9xwbqBPFYjFQ== |
| Document Description | USERS MANUAL 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 90.21kB (1127597 bits) |
| Date Submitted | 2005-03-24 00:00:00 |
| Date Available | 2005-03-22 00:00:00 |
| Creation Date | 2005-03-23 14:33:55 |
| Producing Software | GNU Ghostscript 7.05 |
| Document Lastmod | 2005-03-23 14:34:20 |
| Document Title | Microsoft Word - TR-6000 Quickstart Guide.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Andrew Marles |
Administrative Settings Image File Name Factory Defaults Restore Device Name User Name Password/Confirm Password Ext. Info Enabled Enter the location of the Bios update file then press ‘Upgrade Software” Returns all settings to factory defaults. The network name of the device. The access user name. Enter the password for accessing the device Enable extended information. Page 13 of 24 20155 Stewart Crescent, Maple Ridge, B.C. Canada V2X 0T6 Phone (604) 460-6002 Fax (604) 460-6005 www.tranzeo.com 3/10/2005 WDS Enabled AP MAC Address 1-6 Select this box to enable WDS Enter the MAC addresses of the other APs Page 14 of 24 20155 Stewart Crescent, Maple Ridge, B.C. Canada V2X 0T6 Phone (604) 460-6002 Fax (604) 460-6005 www.tranzeo.com 3/10/2005 Security Basic Enabled Authentication Key Length Default Key Activate Keys Turn On WEP Turn on Shared Key Authentication Level of Encryption. NOTE: 64 bit is called 40 bit on some systems Choose the default WEP key Enter your WEP keys. NOTE: Keys must be entered in HEX only. Page 15 of 24 20155 Stewart Crescent, Maple Ridge, B.C. Canada V2X 0T6 Phone (604) 460-6002 Fax (604) 460-6005 www.tranzeo.com 3/10/2005 Security Advanced Enabled Cipher Type PSK Update Interval Enabled RADIUS Server IP Address Timeout (min) Turn On WPA Level of Encryption. TKIP or AES Enter your password Enter the update interval Turn on 802.1x RADIUS Server Authentication Enter the server IP Enter the timeout period Page 16 of 24 20155 Stewart Crescent, Maple Ridge, B.C. Canada V2X 0T6 Phone (604) 460-6002 Fax (604) 460-6005 www.tranzeo.com 3/10/2005 RADIUS Server Shared Secret Server Port Enter the name of the server Enter the port of the server Page 17 of 24 20155 Stewart Crescent, Maple Ridge, B.C. Canada V2X 0T6 Phone (604) 460-6002 Fax (604) 460-6005 www.tranzeo.com 3/10/2005 Access Control Enable Access Control Associated Wireless Devices Wireless Devices Available Associate With This Station Manualy Select this box to enable access control. Click any devices to disassociate them Click any wireless device that should be associated with the AP Enter the MAC address of a client and then click “add” to associate with it. Page 18 of 24 20155 Stewart Crescent, Maple Ridge, B.C. Canada V2X 0T6 Phone (604) 460-6002 Fax (604) 460-6005 www.tranzeo.com 3/10/2005 Stations List This page displays a list of the stations associated with the AP and their connection statistics. Page 19 of 24 20155 Stewart Crescent, Maple Ridge, B.C. Canada V2X 0T6 Phone (604) 460-6002 Fax (604) 460-6005 www.tranzeo.com 3/10/2005 Network Configuration This page allows you to control the network configuration of the device. Enable the Router option to change the IP configuration for the LAN. You can also choose Static or DHCP IP configuration for both the device and any associated IP clients. Page 20 of 24 20155 Stewart Crescent, Maple Ridge, B.C. Canada V2X 0T6 Phone (604) 460-6002 Fax (604) 460-6005 www.tranzeo.com 3/10/2005 "" 2 $( ' 3 What is a proper Ground? This antenna must be grounded to a proper Earth Ground. According to the The National Electrical Code Sections 810-15s and 810-21, the grounding conductor shall be connected to the NEAREST accessible locations of the following: a) The building / structure grounding electrode b) The grounded interior metal water piping system c) the power service accessible means external to enclosure d) the metallic power service raceway e) the service equipment enclosure f) The grounding electrode conductor The important thing is to connect to ground at the nearest point. Why is coiling the LMR or CAT5 bad? The myth is that lighting follows the path of least resistance. It actually follows the path of least impedance. Coiling cables creates an air-wound transformer, which lowers the impedance. This means you are in fact making your radios a more appealing target for surges. What standard does Tranzeo Wireless equipment meet? This radio exceeds International Standard IEC 61000-4-5 when properly grounded. For a copy of the full testing report, see Report Number TRL090904 - Tranzeo Surge Protection board located on the Tranzeo website. Is lightning damaged covered by the Warranty? No. Lightning is not covered by the warranty. If you follow the instructions, you chances of lightning damage are greatly reduced, but nothing can protect a radio from a direct lightning strike. Page 21 of 24 20155 Stewart Crescent, Maple Ridge, B.C. Canada V2X 0T6 Phone (604) 460-6002 Fax (604) 460-6005 www.tranzeo.com 3/10/2005 Where to Ground the device This radio must be grounded at the Pole AND at the POE. This is because the radio is between the Exterior Antenna and the POE ground. See the examples below Ungrounded Radio An ungrounded radio causes the surge to pass through the radio. In this case the radio most likely will be damaged. Antenna Radio POE Ground Grounded Radio An grounded radio causes the surge to pass directly to ground, bypassing the radio. Antenna Radio POE Ground Page 22 of 24 20155 Stewart Crescent, Maple Ridge, B.C. Canada V2X 0T6 Phone (604) 460-6002 Fax (604) 460-6005 www.tranzeo.com 3/10/2005 Ungrounded POE Mounting Pole In this case, the surge will be picked up by the Cat 5 cable, and since the POE is not grounded, the route for the surge is through the radio to the antenna, and out through the building. POE Cat 5 Cable Grounded POE Mounting Pole In this case, the surge will be picked up by the Cat 5 cable, and since the POE is grounded, the route for the surge is through the POE to ground. Ground POE Cat 5 Cable Page 23 of 24 20155 Stewart Crescent, Maple Ridge, B.C. Canada V2X 0T6 Phone (604) 460-6002 Fax (604) 460-6005 www.tranzeo.com 3/10/2005 Best Practices 1) Always try to run the Cat5 and LMR inside of the mounting pole wherever possible. This helps to insulate the cable from any air surges. Building Cat 5 Cable 2) Keep all runs as straight as possible. Never put a loop into the cables. 3) Test all grounds to ensure that you are using a proper Ground. If using a electrical socket for Ground, use a socket tester, such as Radio Shack 22-141 4) Buy a copy of the National Electrical Code Guide and follow it. 5) If you are in doubt about the grounding at the location, drive your own rod and bond it to the house ground. At least you will know that one Rod is correct in the system. Page 24 of 24 20155 Stewart Crescent, Maple Ridge, B.C. Canada V2X 0T6 Phone (604) 460-6002 Fax (604) 460-6005 www.tranzeo.com 3/10/2005
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 12 XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:30e8bf32-ee0f-4c6c-a389-ae2fbd93efe7 Modify Date : 2005:03:23 14:34:20-05:00 Create Date : 2005:03:23 14:33:55-05:00 Metadata Date : 2005:03:23 14:34:20-05:00 Document ID : uuid:0852eb30-60fe-439a-bd95-8e12cc589e61 Format : application/pdf Title : Microsoft Word - TR-6000 Quickstart Guide.doc Creator : PScript5.dll Version 5.2.2 Author : Andrew Marles Producer : GNU Ghostscript 7.05EXIF Metadata provided by EXIF.tools