Trapeze Software Group 50T0178B Smart Color Touch MDT User Manual Draft x

Trapeze Software Group, Inc. Smart Color Touch MDT Draft x

Contents

User Manual

1 Smart Color Touch MDT Manual | Trapeze March 14, 2017 Smart Color Touch MDT (50T0178-001) Manual Version Author Approval date Approved by Change DRN/DCN Number A A. Edaburn Initial Release
2 Smart Color Touch MDT Manual | Trapeze March 14, 2017 Contents 1Overview ................................................................................................................................ 42References ............................................................................................................................ 43Acronyms ............................................................................................................................... 44Electromagnetic Specifications .............................................................................................. 55Environmental ........................................................................................................................ 65.1Temperature ................................................................................................................... 6 5.2Shock and Vibration ....................................................................................................... 65.3Electrostatic Discharge ................................................................................................... 65.3.1SAE J1455 Sec. 4.13.2.2.3.1 SAE J1113/13: ......................................................... 65.3.2SAE J1455 Sec. 4.13.2.2.3.2 SAE J1113/13 Operational (In‐Vehicle) ESD: .......... 65.4MTBF .............................................................................................................................. 65.5Power Input .................................................................................................................... 65.6Mechanical ..................................................................................................................... 66Connectors ............................................................................................................................ 76.1Serial Communications ................................................................................................... 76.1.1Connector ................................................................................................................ 76.1.2Pinout ...................................................................................................................... 76.2Power ............................................................................................................................. 76.2.1Connector ................................................................................................................ 76.2.2Pinout (mating connector) ....................................................................................... 76.3I/O Connector ................................................................................................................. 8 6.3.1Connector ................................................................................................................ 86.3.2Pinout ...................................................................................................................... 86.4Ethernet .......................................................................................................................... 96.4.1Connector ................................................................................................................ 96.4.1Pinout ...................................................................................................................... 96.5USB ................................................................................................................................ 97Card Interfaces ...................................................................................................................... 97.1Micro-SD Card Slot ......................................................................................................... 97.2SIM Card Slot ................................................................................................................. 9 
3 Smart Color Touch MDT Manual | Trapeze March 14, 2017 8Interface Specifications/Recommendations ........................................................................... 98.1J1708 .............................................................................................................................. 98.2J1939 (CAN Bus) ............................................................................................................ 98.3RS232 ............................................................................................................................. 98.3.112V Systems ........................................................................................................... 98.3.224V Systems ......................................................................................................... 108.4Digital Inputs ................................................................................................................. 108.5Digital Outputs .............................................................................................................. 108.6Audio ............................................................................................................................ 108.7GPS .............................................................................................................................. 108.8Wi-Fi ............................................................................................................................. 108.9Ethernet ........................................................................................................................ 118.10LTE/Cellular .................................................................................................................. 11
4 Smart Color Touch MDT Manual | Trapeze March 14, 2017 1 Overview This document is to provide the specifications and recommendations for the interconnection of the Smart Color Touch MDT. 2 References [1] SAE J1708 Serial Data Communication Between Microcomputer Systems in Heavy-Duty Vehicle Applications Aug 2004 [2] SAE 1939-11 Physical Layer, 250K bits/s, Twisted Shielded Pair Oct 1999 [3] Telit Jupiter JF2 Datasheet [4] IEEE 802.3 3 Acronyms Acronym Meaning DC Direct Current EMI Electromagnetic Interference FCC Federal Communications Commission GPS Global Positioning System IEEE Institute of Electrical and Electronic Engineers, Inc. LAN Local Area Network MTBF Mean Time Before Failure RMS Root mean square USB Universal Serial Bus Wi-Fi Wireless network based on IEEE 802.11
5 Smart Color Touch MDT Manual | Trapeze March 14, 2017 4 Electromagnetic Specifications Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an output on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 1) This product is not a handheld device. 2) This equipment complies with radiation exposure limits set forth for uncontrolled environment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
6 Smart Color Touch MDT Manual | Trapeze March 14, 2017 5 Environmental The Smart Color Touch MDT is designed and tested to meet the following SAE J1455 specifications. 5.1 Temperature Operating: -20°C - + 60°C Storage: -30°C - +75°C 5.2 Shock and Vibration SAE J1455 Sec. 4.10.4.1 Swept Sine Wave Vibration: Sweep 10 Hz to 2000 Hz, 2g’s equivalent Sweep Rate of ½ Octave/min. for 3 hours/axis on 3 axis SAE J1455 Sec. 4.11.3.4 Mechanical Operational Shock: 20g peak acceleration, 11 ms duration, ½ sine wave pulse shape 3 drops/axis on 3 axis 5.3 Electrostatic Discharge 5.3.1 SAE J1455 Sec. 4.13.2.2.3.1 SAE J1113/13: Tested to +/- 4kV direct contact discharge. 5.3.2 SAE J1455 Sec. 4.13.2.2.3.2 SAE J1113/13 Operational (In‐Vehicle) ESD: Tested to +/- 8kV direct contact discharge. 5.4 MTBF TBD hours MTBF minimum 5.5 Power Input Operating voltage range: 8 – 36V DC Current: Nominal value 1A @ 13.8V Peak value 1.5 A @ 13.8V Overvoltage (>36V) and reverse voltage protected. 5.6 Mechanical Depth (w/o RAM ball mount): 63.5mm (2.5”) Depth (w/ RAM ball mount): 101.6mm (4.0”) Width: 254mm (10.0”) Length: 165.1 mm (6.5”)
7 Smart Color Touch MDT Manual | Trapeze March 14, 2017 6 Connectors 6.1 Serial Communications 6.1.1 Connector Connector: D-SUB 15 Female Mating Connector: D-SUB 15 Male 6.1.2 Pinout Pin # Signal Signal Type Pin # Signal Signal Type 1 CAN1_H CAN-High (Port 1) 9 GND CAN-GND (Port 2) 2 CAN1_L CAN-Low (Port 1) 10 CAN2_H CAN-High (Port 2) 3 GND CAN-GND (Port 1) 11 CAN2_L CAN-Low (Port 2) 4 J1708_A J1708-A 12 GND J1708-GND 5 J1708_B J1708-B 13 RS232_RX2 RS232 Receive Data (Port 1) 6 GND RS232 GND (Port 2) 14 RS232_RX1 RS232 Receive Data (Port 2) 7 RS232_TX2 RS232 Transmit Data (Port 2) 15 GND RS232 GND (Port 1) 8 RS232_TX1 RS232 Transmit Data (Port 1) 6.2 Power 6.2.1 Connector Connector: TE Connectivity 284516-3 Mating Connector: TE Connectivity 284510-3 or equivalent 6.2.2 Pinout (mating connector) Pin Number Signal Signal Type 1 IGN_SENSE Vehicle Ignition Sense 2 BATT- Vehicle Battery 1 3 BATT+ Vehicle Battery +
8 Smart Color Touch MDT Manual | Trapeze March 14, 2017 6.3 I/O Connector 6.3.1 Connector Connector: D-SUB 25 Female Mating Connector: D-SUB 25 Male 6.3.2 Pinout Pin # Signal Signal Type Pin # Signal Signal Type 1 DISCRETE_IN1 Input 1 14 DISCRETE_IN2 Input 2 2 DISCRETE_IN3 Input 3 15 DISCRETE_IN4 Input 4 3 DISCRETE_IN5 Input 5 16 DISCRETE_IN6 Input 6 4 GND Ground 17 HS_LINEIN_P Handset Mic + 5 DISCRETE_OUT1 Output 1 (Open Drain) 18 HS_LINEIN_N Handset Mic - 6 DISCRETE_OUT2 Output 2 (Open Drain) 19 GND Handset Mic Shield 7 DISCRETE_OUT3 Output 3 (Open Drain) 20 HS_DIFF_LINEOUT1_P Handset Spkr + 8 DISCRETE_OUT+5V +5V Output 21 HS_DIFF_LINEOUT1_N Handset Spkr - 9 GND Ground 22 EXT_PA_LINEOUT2 PA Lineout 10 ODOM_SIGNAL_DIFF Odometer Ground/ Differential - 23 GND PA Lineout Return 11 ODOM_SIGNAL_IN Odometer Signal/ Differential + 24 EXT_PA_OUT_P PA Output + 12 GND Ground 25 EXT_PA_OUT_N PA Output 1 13 NC Not Connected
9 Smart Color Touch MDT Manual | Trapeze March 14, 2017 6.4 Ethernet 6.4.1 Connector Connector: RJ45 Modular Connector Female Mating Connector: RJ45 Modular Connector Male 6.4.1 Pinout Use standard Cat5e or Cat6 Ethernet cable. 6.5 USB Two USB 2.0 Type A female connectors. - The USB +5V power is fused at 1A hold and 1.8A trip current on both connectors. 7 Card Interfaces 7.1 Micro-SD Card Slot One MicroSD card slot for removable memory storage. 7.2 SIM Card Slot One Mini-SIM (2FF) card slot. 8 Interface Specifications/Recommendations 8.1 J1708 See SAE J1708 Serial Data Communication Between Microcomputer Systems in Heavy-Duty Vehicle Applications Aug 2004 for best practices when connecting to a J1708 vehicle network. 8.2 J1939 (CAN Bus) See SAE 1939-11 Physical Layer, 250K bits/s, Twisted Shielded Pair Oct 1999 for best practices when connecting to a J1939 vehicle network. 8.3 RS232 The minimum/maximum voltages on the bus are specified to be +/-15V. A ‘0’ is +5 to +15V and a ‘1’ is -5 to -15V. Voltages between -3V and +3V are undefined by the standard. The limiting factor for line length is the maximum allowable capacitance of 2500 pF. This limits the wire length to 15m (50ft). 8.3.1 12V Systems Maximum voltages: -3 to +16V with the bus idle
10 Smart Color Touch MDT Manual | Trapeze March 14, 2017 8.3.2 24V Systems Maximum voltages: -3 to +32V with the bus idle 8.4 Digital Inputs VIL < 0.5V and VIH 1.2V. These inputs are protected with 47K of series resistance. Transients to 60V can be tolerated with circuit damage becoming more likely above 60V. 8.5 Digital Outputs Three open drain outputs with a sink current fused at .5A hold current and 1A trip current. One +5V output with a source current fuse at .5A hold current and 1A trip current. 8.6 Audio The internal speaker is an 8 ohm speaker rated to 2W, 200 – 20,000 Hz. The external speaker PA can drive a 4 or 8 ohm speaker up to 15W, 200 – 20,000 Hz. Two microphones, one omnidirectional and one unidirectional (software selectable) with a sensitivity of -46 dB +/-3dB. 8.7 GPS The Smart Color Touch MDT uses an active external GPS antenna. Specifications taken from Telit Jupiter JF2 Datasheet [3]. Channels 48 Sensitivity To -163 dBm Heading 0.01 deg Velocity 0.01 m/s Accuracy 2.5 m Acquisition Rate Cold start: 35s, average Hot start: 1s, average Protocol NMEA and OSP 8.8 Wi-Fi The Smart Color Touch MDT uses an internal half-size mini PCIe Wi-Fi module with external antenna. This supports 802.11 b/g/n and WEP, WPA, and WPA2 encryption.
11 Smart Color Touch MDT Manual | Trapeze March 14, 2017 8.9 Ethernet There is one 10/100/1000 BASET port. Full details of the physical layer are found at IEEE 802.3. 8.10 LTE/Cellular The Smart Color Touch MDT uses an internal Mini PCIe (USB interface) LTE/Cellular modem with external diversity antenna. This supports diversity antenna configuration on LTE band 13 (700MHz) as well as the Cellular (800MHz) and PCS (1900MHz) CDMA bands.

Navigation menu