Traxxas LP SA11201 Track and Field Events Timing Transmitter User Manual DTS Stage UserManual

Traxxas LP Track and Field Events Timing Transmitter DTS Stage UserManual

manual

    DTS User Manual  Stage  Version 1.0
DTS    Version:           1.0 User Manual    Date:  2/24/2012 9:59:00 AM  Confidential  © Traxxas 2009  Page 2 of 7  Revision History  Date  Version  Description  Author 10/10/2011  1.0  Original.  Chris S. Russell
DTS    Version:           1.0 User Manual    Date:  2/24/2012 9:59:00 AM  Confidential  © Traxxas 2009  Page 3 of 7  Table of Contents 1. INTRODUCTION ............................................................................................................................................... 4 2. USERS GUIDE INFORMATION ...................................................................................................................... 5 2.1 ANTENNA REGULATION ................................................................................................................................. 5 2.2 EMISSIONS COMPLIANCE TESTING ................................................................................................................. 5 2.3 WORKING WITH ADDITIONAL TRANSMITTERS................................................................................................ 5 2.4 PRODUCT LABELING REQUIREMENTS ............................................................................................................. 6 3. FCC RF EXPOSURE STATEMENT ................................................................................................................ 7
DTS    Version:           1.0 User Manual    Date:  2/24/2012 9:59:00 AM  Confidential  © Traxxas 2009  Page 4 of 7  1.  Introduction The user manual contains information pertaining to output power, operating frequency, operating channels, data rates, tuning range, intended use, general installation instructions, and antenna connector and gain information.   .
DTS    Version:           1.0 User Manual    Date:  2/24/2012 9:59:00 AM  Confidential  © Traxxas 2009  Page 5 of 7  2.  Users Guide Information It  is  required  that  Traxxas  LLP  place  the  text  below  in  the  product  user  guide  along  with  all  other  pertinent regulatory information.  General Conditions: The following conditions must be strictly adhered to for modular approval: 1. No modification to the module including the circuitry is permitted. 2. Design criteria to include antenna, interconnects, and local oscillator. 3. Testing of the final device configuration for Digital Emissions Compliance  The  Spectrum  2.4  GHz,  DTS  may  not  be  altered  or  modified  in  any  manner  by  the  OEM  or  other  entity. Additionally, no component may be added which could change the radio frequency (RF) characteristics. These include,  but  are  not  limited  to  unintentional  or  spurious  emissions,  immunity,  ESD  characteristics,  or  other items commonly associated with RF devices. This includes all components; passive and active. Additionally, no RF components may be placed between the RF output of the module and the antenna. 2.1  Antenna Regulation The antenna has been selected and specifically tested with the Spectrum 2.4GHz, DTS, and has been certified through the regulatory agencies in the US and European Union authorized use. Use of any other antenna type used with this unit voids the LMA grant for the said module.  2.2  Emissions Compliance Testing Notwithstanding the Modular Approval for the device with associated antenna, the end product configuration must  meet  digital  emissions  compliance  and  must  be  tested  in  accordance  with  FCC  Part  15  requirements confirming radiated emissions are within specified limits.  Applicable FCC guidelines: • Part 15 Section 15.109 Sub-paragraph A, Class B Radiated Emission Limits.  These emission tests can be conducted by the manufacturer or by contacting an approved test facility equipped and certified accordingly. The results of these emissions tests are not required to be submitted to the FCC or Traxxas, but should be kept on file by the OEM.  2.3  Working with Additional Transmitters The DTS should not be operated with any other transmitter in the end product. However, if such an application comes about, further regulatory compliance from the FCC must be obtained.
DTS    Version:           1.0 User Manual    Date:  2/24/2012 9:59:00 AM  Confidential  © Traxxas 2009  Page 6 of 7  2.4  Product Labeling Requirements FCC  product  labeling  requirements  stipulate  an  FCC  label,  including  specific  text,  be  placed  on  the  device containing the module. The product label must include the following text and must be affixed to the exterior of the final product. The text should be located beneath the FCC compliance logo.  This product contains an integrated 2.4GHz (DSSS) radio. FCC ID: XVE-SA11201 In addition to the above text FCC Part 15.21 stipulates that the Digital Electronic Devices manufacturers must also have the following statements printed in their user/operations manual and/or indicate this exact text on the side of the final device.  “This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is  subject  to  the following two conditions: (1) This device may not cause harmful interference, and (2) this  device  must  accept  any  interference  received,  including  interference  that  may cause undesired operation. Caution:  Changes  or  modifications  not  expressly  approved  by  the  party  responsible for compliance could void the user’s authority to operate the equipment.  Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized  modifications  to  this  equipment.  Such  modifications  could  void  the user’s authority to operate the equipment”
DTS    Version:           1.0 User Manual    Date:  2/24/2012 9:59:00 AM  Confidential  © Traxxas 2009  Page 7 of 7  3.  FCC RF Exposure Statement  “This equipment complies with FCC radiation exposure limits set  forth for an uncontrolled environment. End users must follow the specified operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”                          This  document  is provided  “as  is”  with  no warranties  whatsoever  including  any  warranty  of  merchantability, non-infringement,  fitness  for  any  particular  purpose,  or  any  warranty  otherwise  arising  out  of  any  proposal, specific or simple.  Traxxas LLP disclaims all liability, including liability for infringement of any proprietary rights, relating to use of information in this document. No license, expressed or implied, by estoppel or otherwise, to any intellectual property rights is granted herein.

Navigation menu