Traxxas LP TRX1018 Traxxas Link wireless module User Manual
Traxxas LP Traxxas Link wireless module Users Manual
Contents
Users Manual
TRAXXAS LINK WIRELESS MODULE INSTALLATION INSTRUCTIONS
3
76
4
8
5
9
2
1
KC2043-R02 Rev 160309
Module
Port Cover
Download the Traxxas Link® application
from the Apple App Store™. Download
Traxxas Link App
Screw
1.5mm
hex wrench Traxxas Link®
Wireless Module
1110 12 13
Blinking LED
Traxxas Link® App,
Garage Screen,
Wireless Module Button
Connected to Traxxas
Link Wireless Module
Press here to search for
Traxxas Link Wireless Module
3.
TX
Garage Traxxas Link Wireless Module
Connecting...
TX
Garage Traxxas Link Wireless Module
Connected
Exit the app or turn off the
transmitter to disconnect.
TRAXXAS.com
Traxxas, 6250 Traxxas Way, McKinney, TX 75070,
Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
Note: The Traxxas Link Wireless Module (part #6511)
can only be used with the following Traxxas TQi
transmitters: part #6528, #6528A, #6529, #6529A,
#6530, #6530A, #6507R, #6507X, #6509R, #6509X.
FCC Compliance
This device complies with the limits for a Class B digital device as described in part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential settings. This equipment generates, uses, and can radiate radio frequency energy
and, if not operated in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installatiion.
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Canada, Industry Canada (IC)
This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
For body-worn operation, this device has been tested and meets FCC and Industry Canada RF exposure guidelines when used with an accessory that contains no metal and that positions the device
a minimum of 5mm from the body. Use of other accessories may not ensure compliance with RF exposure guidelines.
End Product Labeling
This module is marked with an FCC ID and IC certification number. The host system using this module must be labeled in a visible area with the following: “Contains FCC ID: XVE-TRX1018,
IC: 8668A-TRX1018”. This LMA is tested and approved as a stand-alone configuration. Additional evaluation may be required for any system integrated with this radio module. This module and its
antenna should not be installed or operated in conjunction with any other transmitter.