Triamp Technology NOODLEBUDS Wireless Bluetooth Earbuds User Manual Noodle Buds 0225

Triamp Technology., Ltd. Wireless Bluetooth Earbuds Noodle Buds 0225

User manual

OVER-EAR FITTING 141226USE YOUR FINGER TO GENTLY INSERT THE EARBUDS IN YOUR EAR. TAKE OFF HEADPHONES, INSERT CORD INTO THE FINAL ROUNDED SLOTS,PUT HEADPHONES BACK ON, NOW YOU ARE READY TO GO! 24 01YOU CHOOSE YOUR EAR TIPS FOR COMFORT AND STABILITY... NOW IT’S TIME TO EXPERIENCE PURE MUSIC PLEASURE. THIS IS THE OVER-EAR FITTING OPTION. IT IS NOT NECESSARY TO REMOVE THE EARBUD STABILIZERSTO ADJUST THEM FOR AN OVER-EAR FITTING. 16182022THE OVER-EAR FITTING OPTION IS DESIGNED FOR PURE LISTENING PLEASURE.THE MICROPHONE AND CONTROLS ARE LOCATED BEHIND THE EAR IN THIS FITTING OPTION.WHILE OVER-EAR FITTING IS A GREAT WAY TO LISTEN TO MUSIC, SOME ADJUSTMENT IS REQUIRED TO FIT THE EARBUDS CORRECTLY. 04 CORD MANAGEMENT CLIPSINSERT CORD INTO THE 2 SLOTS IN EACH CLIP AS SHOWN.OVER-EAR MODE REQUIRES LESS CORD, SO BEFORE FITTING, INSTALL THE CORD MANAGEMENT CLIPS TO SECURE THE SLACK FOR A CUSTOMIZED FIT. SEE NEXT STEPS.THE EARBUD AND EAR TIP DESIGN IS INTENDED TO FIT COMFORTABLY IN THE EAR CANAL. IN COMBINATION WITH THE EARBUD STABILIZER, YOUR EARBUDS MAKE LISTENING TO MUSIC SHEER ECSTASY. INSTALL THE EAR STABILIZER OVER THE EARBUD AS SHOWN.TO ADJUST THE FIT, ROTATE THE STABILIZER ON THE EARBUD. R03 EAR BUD ORIENTATIONOVER LEFT EAR:Controller and MIC locationLTHE EAR TIP IS SPECIFICALLY DESIGNED FOR A SPECIFIC EAR ORIENTATION.FOR BEST RESULTS USE THE LEFTEARBUD IN THE LEFT EAR.02 COMFORTABLY SECUREDRLINSERT THE EARBUD IN YOUR EAR AND ADJUST AS THE EAR STABILIZER NEEDED FOR MAXIMUM COMFORT.IT IS BEST TO TEST EACH EAR TIP TO DETERMINE THE BEST FIT AND SOUND PERFORMANCE.MAKE AN “S” SHAPE WITH THE MIDDLE SECTION OF THE CORD. 06 ConnectedCONTROLS AND MIC ON LEFT SIDE02 EARBUD ORIENTATION04EAR TIP ANGLE DESIGN FOLLOWS INWARD DIRECTION OF YOUR EAR CANAL FOR A SNUG FIT.L RSETTING UP AND FITTING02INDEXBASIC SETUPSETTING UP AND FITTINGOVER-EAR FITTINGUSING THE EARBUDSACCESSORIESCHARGING THE BATTERYPAIRINGCOMMANDSSPECIFICATION ...................................................................................02...............................................................................................14..................................................................................................... 31.................................................................................... 31.............................................................................................................. 33...................................................................................................... 37............................................................................................ 38WARRANTY ............................................................................................ 39THE EAR STABILIZERS CAN BE ADJUSTED FOR BEST FIT. POSITION THE EAR STABILIZER AS SHOWN AND GENTLY ADJUST OVER THE NOZZLE. 0805 COMFORT AND SECURITY RLIN PLACE TO A MORE COMFORTABLE AND SECURE FIT.STABILIZERCONTROLON Left EAR ROTATE THE STABILIZER SO ITFITS UNDERNEATH THE RIM OF THE EAR STEM.ONCE ADJUSTED, THE STABILIZERFITS UNDER THE EAR STEM AND1004 PROPER FITTINGThe best music performance is only achieved with the right ear to eartip seal. NEED TO PAIR?See page 33-37 to pair your earbuds. HOLD4 SEC.TOPAIR“PAIRING”06ONATTACH AN EAR TIP AND PAIR YOUR EARBUDS TO A BLUETOOTH ENABLED DEVICE. TRY EACH EAR TIP TO DETERMINE THE BEST FIT AND SOUND PERFORMANCE.ALTERNATING RED/BLUEUSER GUIDEWireless Bluetooth Earbuds03 THE RIGHT SIZE FOR GREAT SOUND PERFORMANCEHEARING IS BELIEVINGGreat sound can only be believed with the right size eartip. Occassionally the eartips move out of place due to body movement resulting in a reduction in audio quality. The earbud stabilizers hold the earbuds in place to a more comfortable and secure fit.LMSTHE CORDMANAGEMENTCLIPSSILICON EAR TIPSEAR STABILIZERWIRELESS BLUETOOTHEARBUDS01 WHAT'S INSIDETHE STABILIZERS ARE ONLY AVAILABLE FOR THE TYPE OF EAR TIPS INDICATED IN THE ILLUSTRATION. ADD STABILITY AND COMFORTVOICE PROMPT:INSTALL THE EAR STABILIZER TO HOLD THE EARBUDSCREATES A COMFORTABLE SNUG FIT.3941 3640383537343230ACCESSORIES CHARGING 2927252321191715131109070503013133USING THE EARBUDS CONNECTED05HOLD4 SECTOPAIRAUDIBLE: When you hear “Power on”, continue pushing until youhear “PAIRING”. PAIRING MODE: ALTERNATING RED AND BLUE LEDSREGISTER YOUR DEVICE TO RECEIVE UPDATE INFORMATION http://www.noodlebuds.comGREAT MUSIC REQUIRES GOOD EARSAvoid prolonged periods of useand excessive audio levels.The use of earbuds around road traffic is not advisable. Wireless bluetooth earbudsCarrying case3 eartips pairs (S,M,L)1 ear stabilizer pair2 cord management clips1 USB cable1 quick start quicleBefore using your Bluetooth earbuds, make sure you fully charge them to extend the life of the battery. 1. To access the USB port (controller box), pull back the cover to expose the USB port.2. Insert the USB cable into the port. The LED light starts red and turns blue once charging is complete. A full charging requires up to 1.5 hours.3. To check earbuds’ battery status: Turn earbuds on. top volume up or down to trigger a status response.Note:When listening to music, tap Pause and wait for blueLED to flash rapidly. Tap volume up or down to trigger a status response.PAIRING TO YOUR PHONE / MUSIC DEVICE THE FIRST TIME 1. Press and hold the audio/call button for more than four seconds. The LED flashes an alternating red and blue indicating the pairing process is ongoing. 2. Turn on the Bluetooth on your phone/device and allow it to search for new devices. 3. Select the [NOODLEBUDS] to initiate pairing. If a password is necessary, enter 0000. After successfully pairing to your phone/device, an audible prompt “Headset connected” is heard. 4. If the pairing is not successful, power down the earbuds by pressing the the audio/call button for four seconds. Repeat the pairing process once again. PAIRING WITH A BLUETOOTH ADAPTER Once the initial pairing has taken place, you may want or require to pair to other smart devices.1. Set the earbuds in pairing mode: If earbuds are powered off, press and hold the audio/call button until the audible “pairing” sounds. The LED alternates between blue and red to indicate a pairing mode. 2. Activate the Bluetooth function on your smart device and allow it to search for devices.3. On your smart device list, select [NOODLEBUDS]. If a password is necessary, enter 0000. After successfully pairing to your phone/device, an audible prompt “headset connected” is heard. PAIRING WITH SEVERAL BLUETOOTH DEVICESOnce a device is paired to the Handsfree Bluetooth Earbuds, you do not need to pair it again.Up to eight smart devices can be paired to the earbuds. Follow the same instructions as provided previously to pair new devices. Once the total of eight devices are paired and upon pairing the ninth device, the oldest paired device will be deleted from the memory list. Switching between paired devices is easy. Turn off the Bluetooth function on the smart devices to disconnect them from the Wireless Bluetooth Earbuds. Turn on the Bluetooth function of the device that requires the connection and, from the device list, press the [NOODLEBUDS] to re-connect. COMMANDS TAP PRESS > 2 SEC. PRESS > 4 SEC.ONOFFRedialTap to answer or end a callReject a call, voice dialMute & unmute call: Simultaneously press volume up (+) and down (-) buttons. The audible “mute on” or “mute off” is heard. An alert repeats every 5 minutes when mute is on. Use call waiting: Tap the audio/call button to put the first call on hold and answer the second call. To switch between calls, tap the audio/call button. To end the second call and retrieve the first call, press the audio/call button for 2 seconds.SPECIFICATIONSaptX™ audio enhancement HFP v1.6 wideband speech, HSP v1.2, A2DP v1.2, AVRCP v1.4MAX. 10 meters (30 feet)Music & calls up to 5 hoursAuto sleep after 5 minutes, >180 days in sleep modeDC 5V 100mAApproximately 1.5 hours34.5(H) x 15.7(W) mm earbud size, 643 mm cord lengthApprox 14.5gBluetooth v3.0 specification support ProfileEffective RangeWorking timeStandby timeInput voltage Charging timeDimensions Weight AUDIBLE “BATTERY LOW”Approx. 5 mins prior to empty.LED STATUS ARE HEADPHONES ON? IS BATTERY LOW?LED flashes: Red: Low battery / Power onBlue: During connectedOff: Powered offMICRO USB PORTLocate the cover and pull back to expose the micro USB port. 1.5+ hrs for full charge provides 5 hours of playtime. 30 mins charging provides 90 minutes of playtime. Red (USB cable connected): ChargingBlue (USB cable connected): ChargedRed+Blue Alternating: Pair ModeLED off: Powered OffTap the + & - button to change language*.Press the + & - button for 2 seconds to toggle Voice Prompt on.Press the + & - button for 5 seconds to toggle Voice Prompt off.* Voice guide supported: English , France, German, Spain, * Chinese and Japanese. Voice Alert List : Redial, Power on, Power off, Select Language English,*Enable voice Prompt, Pairing, Pairing successful, Low battery charge*headset, Battery Low, Battery middle, Battery high, Headset connected, Mute on, Mute off.Voice PromptsWARRANTY, CARE & MAINTANCEWARNING: Due to the isolating characteristics of these headphones do not use while driving, riding a bike or where vehicular traffic is present , or in any other activity where failure to hear surrounding sounds could be dangerous. Use of these headphones at excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Take caution in regards to inserting objects into ear canal, use at own risk.Copyright 2014 Triamp Technology., LTD. All rights reserved. Triamp and the Triamp logo are trademarks of Triamp Technology., LTD. Bluetooth is a trademark owned by Bluetooth SIG, Inc. USA, and licensed to Triamp Technology., LTD. iPhone is a trademark of Apple, Inc., registered in the U.S. and other countries. Manufactured under European patent no. EP1410607B1 & corresponding foreign patents. Assembled in China.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications to device will void the user’s authority to operate the device. The battery is recycled. Do not dispose of the battery in fire, as it may cause explosion.Full warranty, care and maintenance details at http://www.noodlebuds.com28Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu