Trigiants Technology SGM-03 Smart Clucose Meter User Manual SMART GLUCOSE METER

Trigiants Technology Co., Ltd. Smart Clucose Meter SMART GLUCOSE METER

user manual

© 2014 Smart Meter Corp. FCC ID: 2ACEUSGM-03 SMART GLUCOSE METER USER MANUAL Brand Name: IGLUCOSE
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Table of Contents Part I: Safety and Precautions .............................................................................................................................. 1 1. Safety Measures .......................................................................................................................................... 1 2. Interference with Medical Equipment .......................................................................................................... 2 3. Charging the Battery .................................................................................................................................... 2 Part II: Features and Functions Highlights ............................................................................................................ 3 Part III: Smart Meter Parts ................................................................................................................................... 4 1. Smart Meter at a Glance .............................................................................................................................. 4 2. Smart Meter Functions ................................................................................................................................ 5 Part IV: Operating Smart Meter ........................................................................................................................... 6 1. Preparing the unit ........................................................................................................................................ 6 2. Getting started ............................................................................................................................................. 6 3. Testing glucose level .................................................................................................................................... 6 4. Selecting Menu Options ............................................................................................................................... 8 5. Obtaining Averages and History ................................................................................................................... 8 6. Obtaining information .................................................................................................................................. 9 Appendix: Models .............................................................................................................................................. 10
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 1 Part I: Safety and Precautions To ensure your safety and wellbeing, and the optimal functioning of your Smart Meter unit, please familiarize yourself withthe followingsafety measures and precautions before using Smart Meter. 1. Safety Measures 1. Switch off and do not use Smart Meter when you are:  Ata gas station, chemical plant or other location containing explosive or inflammable materials.  Before boarding an airplane and throughout the flight.  In the vicinity of devices such as pacemakers, hearing aids and other electro-medical equipment which may be disrupted by Smart Meter (see “Interference with Medical Equipment” below). 2. Charge Smart Meter safely:  Charge the unitonly when the battery is properly installed. Attempting to charge without aproperly installed battery will result in damage to the unit.  Charge the unitonly in a well-ventilated environment and away frominflammable and explosive materials (see “Charging the Battery” below). 3. Protect Smart Meter from damage:  Keep the unit away from magnetic substances, such as magnetic discs or credit cards, so as to avoid demagnetization.  Never leave the unit exposed to direct sunlight, or industy or high humidity environments.  Keep the unit away from liquid. If the unit is soaked or immersed in liquid, dry and remove the battery and contact the supplier. Do not attempt to use a unit in this condition!  Do not use liquids or a cloth with detergents to clean the unit,, use soft dry cloth only.. 4. Use only authorized parts and services for repairs:  Never attempt to take the unitapartby yourself. Contact the supplier in case of any malfunction of your Smart Meter.
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 2  Warranty and guarantee for the accessories and parts are voided by any unauthorized repairs or the use of parts not produced by the original factory. 5. Store the unit safely:  Avoid storing or using the unit at too high or too low temperatures. The working temperature of SGM-03 is -10ºC ~ 50ºC  Keep the unit out of reach of children.Store itin a secure location when not in use. 2. Interference with Medical Equipment The use of equipment that transmits radio signals, at the time of transmitting data, can interfere with insufficiently protected medical apparatus. Consult a doctor or the manufacturer of the unit to determine if it has adequate protection against external radio signals, or if you have any questions about where and how to use this unit. Pacemaker manufacturers recommend a distance at least 15 cm (6 inches) between a mobile wireless device and a pacemaker to avoid the risk of interference with the pacemaker. 3. Charging the Battery Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. If you do not intend to use Smart Meter for a long time e.g. more than 1 month, remove the battery from the Smart Meter so as to prevent damage to the battery or the unit. If the battery is completely discharged when recharging commences, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. Note: Actual operation time of the battery varies according to operation mode, network settings and call settings. Warnings: Be careful not to short-circuit the battery accidently. Short-circuiting will occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 3 Dispose of batteries safely and legally.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries safely according to local regulations. Do not dispose of as household waste.Please recycle when possible. Part II: Features and Functions Highlights The Smart Meter is a new brand of glucose meter, with the following special features and functions:  High quality color display  Rechargeable battery  Voice prompt  Glucose reading transmitted automatically to server  Alerts and reports to family member or other designated individual if needed  Compact and fashionable look
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 4 Part III: Smart Meter Parts 1. Smart Meter at a Glance Figure 1: Front and reverse views of the Smart Meter unit Please see the following page for descriptions of the functions of the parts numbered above.
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 5 2. Smart Meter Functions Note: Several keys perform different functions depending on the mode of use. The normal mode is indicated first; where applicable,anotherfunctionis indicated by the “in standby” or “press and hold”mode. # Name Function 1 Up key Go up In main standby: go to Main Menu Press and hold: go to Information 2 Middle („home‟) key Enter In standby:change Test Mode Press and hold:turn unit on oroff 3 Down key Go down In standby:go to Average Press and hold: go to History 4 GSM signal strength Indicates GSM signal strength Signal strength is shown by number of bars (0 -4; in airplane mode, it is zero 5 Battery level Indicatesbattery level 6 Airplane mode Network name shows here in when GSM is on. In standby: GSM is off 7 Sending signal Signal blinks when data is being sent to server 8 Test mode Icon indicates one of three test modes: Before Meal, After Meal orControl Solution. 9 Glucose value Indicates the glucose value 10 Time/Date Indicates the time and date 11 Charging light Small indicator light illuminates while battery is charging 12 Strip slot Test strip is inserted here 13 USB port USB port for charging battery only 14 Speaker Sound comes from here 15 Strip ejector Push key to eject test strip after test is completed
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 6 Part IV: Operating Smart Meter 1. Preparing the unit Take out the battery from the plastic bag, open the back cover, and install the battery inside battery compartment. Prepare some test strips and test solution to test the unit. 2. Getting started To turn Smart Meter on, press and hold the middle key. A brief animation appears and the screen lights up. Note: 1) When the meter is turned on for the first time, it automatically connects to GSM to synchronize the time and date (This may take few seconds to 3 minutes!), and the network name will show at the top of the screen. If it does not synchronize, select Menu, then Date and Time, then Synchronize Time. To set the time and date manually. 3. Testing glucose level 1) To test glucose level, go to main standby mode, press the middle keyto select Test Mode. OR Go to Menu and select Test Mode One of three 3 options appears – Before meal, After meal and Control solution. 2) Insert a strip to the slot.The meter displays “Strip inserted” After 3-4 seconds, a prompt “Apply a drop of blood” appears. 3) Place a drop of blood on the strip.The meter shows the glucose value with a 5 seconds count-down before it activates the GSM and sends the data. The sending signal (see #7 of Figure 1) blinks. “Successfully recorded” displays once the data is sent successfully to the server. 4) After the test, push the strip ejector (#15 of Figure 1) to eject the strip, without touching the used strip.
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 7 Notes:  Whenever the unit is turned on, it will synchronize the time and date; however,it must connect to network. In areas with poor network coverage, this maytake a long time, or fail to connect. In this case, you must set time and date using the menu options.  If the network signal is weak, sending data can fail. Check the signal strength indicator (#4 of Figure 1). If the unit indicates that the signal is poor, the unsent data will be sent automatically the next time the unit connects and the signal strength is sufficient.  You can manually select a test mode, and this will remains as the default mode. Do not change modes or the data will be inconsistent and the results unreliable.  To save power, the units is ALWAYS in airplane mode, except for the occasions that network connection is needed, e.g. sending data, synchronizing time etc.
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 8 4. Selecting Menu Options The following table indicates the first level of menu options that are available when you select “menu” and then the second level of options, and where applicable, the third level of options, available under each menu: First level options Second level options Third level options Date and time Synchronize time Set Date Set Time Date Format Time Format Back Year – Month - Day Hour – Minutes MM/DD/YYYY DD/MM/YYYY YYYY/MM/DD 24 hours 12 hours Test Mode Before Meal After Meal Control Solution Glucose Unit Mg/dl Mmol/l User Mode Single User Multi User Back Go back to last page 5. Obtaining Averages and History 1) To go to Averages, press the key on the right (#3 in Figure 1) The average figures will be displayed for the last 7, 14, 30 and 90 days, and the previous readings. 2) To go to History, press and hold the key on the right. All the tested records are stored here.
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 9 6. Obtaining Information 1) To go to Information, press and hold the key on the left (#1 in Figure 1).The following information appears:  IMEI: International Mobile Equipment Identity number of the device  IMSI: International Mobile Subscriber Identitynumber for the SIM card  Network selection: you can select network here  Tools: Switch between flight mode and normal mode, or test other functions  Version: Software version information  Shutdown: to turn off the device  Back: go back to previous screen 7．Testing data transfer principle。 1）In most of time，this device is in flight mode，the GSM module is closed。so，get more battery life and negligible radiation。 2）When using this device to test gluclose，hand it in front of eyes，easily viewing（about 20cm-30cm），and insert stripe，get the gluclose data。 3）After getting the data，the device open the GSM module， send these data to the service web by GSM network. If finished，show the informations in screen，and close the GSM again。 Note:In “User Mode”, if you select “Multi User”, up to 35 patient IDs will be shown in the Menu (from P01 – P35).
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 10 Appendix 1: Models The Smart Meter models can be identified by model number as follows:
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 11 APPENDIX 2: SGM-03 Specification Main Sub Details Hardware GSM GSM Platform MT6260 Frequency GSM850/900/1800/1900 Antenna Interior on the bottom Glucose Type Module mounted IC NEC 78F0593 Test Sample Fresh Capillary Whole Blood Test Result Plasma / Serum glucose Sample Size Less than 0.5 uL Measuring Time Less than 5 seconds Measuring Range 10 – 650 mg/dL (0.6 – 36.1 mmol/L) Working temp -10ºC ~ 50ºC General LCM Size 2.4" QVGA Nature Hi contrast TFT Colors 260K Resolution 320 * 240 pixels Keypad (3 Keys) Left key Menu Middle key ON/OFF; Enter, test mode change Right key Check data Dimension 100 * 50 * 15mm Port Micro-usb Charging, software download Speaker 15mm mini-speaker as buzzer or vocal reminding
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 12 Battery Capacity 3.7V, 1,000mAh Li-Ion Last time 25-30 days for normal use (2-3 tests per day) Software function 1 Data entry Storage 1,000 entries 2 Main standby page GSM signal strength, battery level, carrier name, date/time etc 3 Message Yes Server can send to SGM-03, for any tips, feedbacks etc 5 Alarm Yes 5 items 6 GPRS/USSD Yes -- 8 Languages English, Chinese, Spanish, Arabic, Hebrew, Potuguese, Indian etc
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 13 APPENDIX 3 Trouble Shooting Problem Possible reason Solution Cannot turn on meter No battery Battery connection error Fix a battery Check the connection Battery running out fast Meter in normal mode during standby Switch the meter to airplane mode manual, long press Left key, go to Tools No promots after inserting strips Connection error between glucose & GSM Return for service Cannot turn it off by pressing middle key Software error Long press left key, go to Shutdown Cannot insert strips Strips spec mistake Change strip Cannot send data Weak signal or network error All unsent data will be sent together with data for next test Cannot synchronize time Network error Do it by hand. Menu – Date and time
Smart Meter Corporation SMART GLUCOSE METER USER MANUAL ___________________________________________________________________________________________ Page | 14 Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user‟s authority to operate the equipment. *RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Do not use the device with the environment which below minimum -10℃ or over maximum 50℃, the device may not work. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user‟s authority to operate the equipment.

Navigation menu