Trilithic 360DSP Cable Installer Meter with Wi-Fi User Manual Seeker Operation Manual v4 08 PN 0010266001

Trilithic, Inc. Cable Installer Meter with Wi-Fi Seeker Operation Manual v4 08 PN 0010266001

Users Manual

Wi-Fi OptionOperation Manual360 DSPNext Generation Certification MeterThis  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device,  pursuant  to  Part15  of  the  FCC  Rules.  See  Page  2  for  complete  details.This  Class  B  digital  apparatus  complies  with  Canadian  ICES-003.  See  Page  2  for  completedetails.
360 DSP - Operation Manual, Wi-Fi Option2Industry Canada ComplianceThis device complies with Industy Canada license-exempt RSSstandard(s). Operation is subject to the following two conditions:(1) This device may not cause harmful interference. and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.FCC Part 15 ComplianceNote: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to providereasonable protection against harmful interference in a residential installation.  Thisequipment generates, uses, and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications.  However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interferenceby one or more of the following measures:Reorient or relocate the receiving antennaIncrease the separation between the device and receiverConnect the device into an output on a circuit different from that to which the receiver isconnectedConsult the dealer or an experienced radio/TV technician for helpPersuant to FCC 15.21 of the FCC rules, changes not expresslyapproved by Trilithic might cause harmful interference and voidthe FCC authorization to operate this product.The antenna used for this instrument is installed at the Trilithicfactory or by Trilithic approved repair facilities. During operationof the device, a distance of 20 cm or more should be maintainedbetween the antenna in this device and person. To ensurecompliance, do not operate at closer distances than this. Theantenna on the 360 DSP is located inside the device at the top ofthe unit attached to the back plastic case. Do not use anyantenna other than the installed antenna.
360 DSP - Operation Manual, Wi-Fi Option31. General Information .............................................................................................................. 5Helpful Website ..................................................................................................................... 5Where to Get Technical Support ............................................................................................. 5How this Manual is Organized ................................................................................................ 6Conventions Used in this Manual ........................................................................................... 6Precautions ........................................................................................................................... 7What is the 360? .................................................................................................................... 8Overview .......................................................................................................................... 8The Standardization Solution ............................................................................................ 8Next Gen Features ........................................................................................................... 8Comprehensive Testing .................................................................................................... 9Total Home Certification Management .............................................................................. 9Auto Test Apps ...............................................................................................................10Justify ROI ......................................................................................................................10Testing Features .................................................................................................................. 11Additional Functions ............................................................................................................11Equipment Supplied with the 360 DSP ................................................................................ 12A Guided Tour of the 360 DSP .............................................................................................13Front View ......................................................................................................................13Rear View ......................................................................................................................14Top View ........................................................................................................................15Bottom View................................................................................................................... 152. Wi-Fi Setup .......................................................................................................................... 17Wi-Fi Setup Procedure ........................................................................................................ 173. Wi-Fi Operation ................................................................................................................... 19Enable Wi-Fi ....................................................................................................................... 19Disable Wi-Fi ...................................................................................................................... 21Wi-Fi Survey Mode ..............................................................................................................224. Specifications ..................................................................................................................... 23Table of Contents
360 DSP - Operation Manual, Wi-Fi Option4THIS  PAGE  LEFT  INTENTIONALLY  BLANK
360 DSP - Operation Manual, Wi-Fi Option5Helpful WebsiteThe following website contains general information which may be of interest to you:http://www.trilithic.comTrilithics website contains product specifications and information, tips, release information,marketing information, Frequently Asked Questions (FAQs), bulletins and other technicalinformation. You can also check this website for product updates.Where to Get Technical SupportTrilithic technical support is available Monday through Friday from 8:00AM to 5:00PM EST.Callers in North America can dial 317-895-3600 or 800-344-2412 (toll free).  International callersshould dial 317-895-3600 or fax questions to 317-895-3613. You can also e-mail technicalsupport at support@trilithic.com.For quicker support response when calling or sending e-mail, please provide the followinginformation: Your name and your company name The technical point of contact (name, phone number, e-mail) The firmware version number A detailed description of the problem you are having, including any error or informationmessages1. General InformationChapter  1
360 DSP - Operation Manual, Wi-Fi Option6Conventions Used in this ManualThis manual has several standard conventions for presenting information.Connections, menus, menu options, and user-entered text and commands appear in bold. Section names, web and email addresses appear in italics.A NOTE is information that will be of assistance to you relatedto the current step or procedure.A CAUTION alerts you to any condition that could cause amechanical failure or potential loss of data.A WARNING alerts you to any condition that could causepersonal injury.How this Manual is OrganizedThank you for choosing the 360 DSP. This manual is provided with the 360 DSP to help the userbecome better acquainted with the device and to become productive faster. This manual isdivided into the following sections:Chapter 1: General Information - provides an overview of the instrument and its basicfeatures. Before using the instrument, it is recommended that the user read this section foran overview of features, basic commands and other important details.Chapter 2: Wi-Fi Setup - provides instructions on the setup of the Wi-Fi option.Chapter 3: Wi-Fi Operation - provides instructions on the usage of the Wi-Fi option.Chapter 4: Specifications - provides instrument specifications.
360 DSP - Operation Manual, Wi-Fi Option7PrecautionsA strong electromagnetic field may affect the measurementaccuracy of the 360 DSP.Use only the battery charger supplied with the 360 DSP.Persuant to FCC 15.21 of the FCC rules, changes not expresslyapproved by Trilithic might cause harmful interference and voidthe FCC authorization to operate this product.The antenna used for this instrument is installed at the Trilithicfactory or by Trilithic approved repair facilities. During operationof the device, a distance of 20 cm or more should be maintainedbetween the antenna in this device and person. To ensurecompliance, do not operate at closer distances than this. Theantenna on the 360 DSP is located inside the device at the top ofthe unit attached to the back plastic case. Do not use anyantenna other than the installed antenna.
360 DSP - Operation Manual, Wi-Fi Option8What is the 360?OverviewAdvanced Home Certification Capabilities Simplify Installation and TroubleshootingIntuitive Color Touch Screen with Simple Pass/Fail Indicators Reduce Installer EntryErrors and Improves Decision MakingNext-Generation Auto Test Apps Streamline CertificationConvenient Multiple Standard Tests in a Single Auto Test App helps to Standardize TechProcesses & ProceduresPowerful Troubleshooting Tools Improve the Overall Health of the SystemThe Standardization SolutionTrilithics 360 DSP is the first meter designed specifically for Home Certifications. Built fromthe ground up, this fulfillment meter is ideal for standardizing processes and procedures forinstallation and troubleshooting  and includes a price point that makes it feasible for systemoperators to outfit their entire fleet.Tailored for the challenges faced by installers, contractors and service techs, this go-to next-gen meter helps simplify decision making and streamline standard processes andprocedures. This improves tech efficiencies and the overall health of the entire system.Next Gen FeaturesThe 360 DSP features an intuitive color touch screen interface, simple pass/fail indicators, andsimple apps to streamline certification and make the installers job easier.Everything about this next-gen meter was built with the technician in mind, from the longestbattery life and quickest charge time of any installation meter to its unique built-in LEDflashlight for those dark cramped spaces.Including next-generation smart device technology the 360 DSP is virtually the easiest, mostfeature-rich, bestperforming installation meter available today.
360 DSP - Operation Manual, Wi-Fi Option9Comprehensive TestingThe 360 DSP makes Home Certification a breeze for technicians at all levels includinginstallation, service, and contractor. Techs will appreciate the advantages of a quick andefficient device at their disposal that features a flexible and easy-to-operate interface that isinspired by modern smart devices.This next gen fulfillment tool comes equipped with powerful troubleshooting tools to performtriple play tests, set Home Certifications standards and measure both Analog and Digitalsignals. With its built-in CableLabs Certified DOCSIS 3.0 (8x4) Modem, Ethernet and Wi-Ficommunications capabilities, all testing results can be easily forwarded to ViewPoint in theback office in near real-time.Total Home Certification ManagementCombining 360 DSPs in the field with the new ViewPoint WFM Module in the back office,managers now have simplified access to intelligent management tools for monitoring,assessing and improving the efficiency of their total home certification operation.By unifying an entire MSOs field operations in one convenient dashboard, managers caneasily verify installation compliance and quality throughout the entire plant, either by home,system, region, division or any other attribute from billing systems.This simple and completely customizable integrated system of field analysis and reportingtools allows managers to watch over their entire field operations in one convenient dashboardand compare each location in the system, analyze the overall health of their entire organizationand address concerns in near real-time. (See the ViewPoint WFM Module datasheet for moreinformation).
360 DSP - Operation Manual, Wi-Fi Option10Auto Test AppsThe 360 DSP features next generation auto test applications that practically walk thetechnician through a job. By performing standardized measurement tests at various requiredlocations on the job site using user set test plans, channel plans and limit sets, the meter veryclearly indicates (using color and symbols) what areas still need attention, before thetechnician leaves the job site.Multi-user support allows technicians that work in various territories to easily switch channelplans and standardized auto test apps and test limits or login as a completely different user.The built-in web browser allows techs to upload job data in near real-time as well as transmitand receive channel plans, auto tests, work orders and firmware. Leaving less room for entryerror, this new simple user interface can translate into less training and more efficient time inthe field for techs. The 360 DSP also offers a higher comfort factor for novice technicians,reducing decision making in the field, which can ultimately result in more productive work daysand more satisfied customers.Justify ROIField operations managers can now easily verify that all of their technicians are performing theproper tests and are doing so at the right place and timein near-real time. The potentialbenefits include identifying techs who need additional training, improving team performance,reducing truck rolls and cutting operating costs could obviously be significant.At a higher level ViewPoint can deliver simple, standardized, system-wide reports anddashboards that can help a director or VP of technical operations view the entire operation ata glance to gain information that can be used to reduce service and repeat trouble calls.Essentially, this integrated system approach allows cable operators to see much more of theirhome certification operations and use the information in practical ways. The insights canenable them to identify both localized problems and highlevel system issues to makedecisions based on a clearer understanding of their overall operations and the associatedROI.Combining 360 DSPs in the field with the new ViewPoint WFM Module in the back office,managers can view the health of their entire system in near real-time, for total HomeCertification management.
360 DSP - Operation Manual, Wi-Fi Option11Testing FeaturesUpstream Return Spectrum Analysis (4 to 110 MHz)Level ModeC/N MeasurementQAM mode (MER/BER/Constellation)Complete Channel PlanScan with Tilt MeasurementDOCSIS 3.0 modem 8x4 (100/304 MBPS)RJ-45 (10/100MBPS)Wi-Fi b/g 2.4 GHz (Optional)Cable Modem StatisticsBuilt-in CM to RJ-45 ModeNetwork Test Suite, includes Thru-put, VoIP, Ping, and Trace RouteCM Source (optional)Built-in Frequency Domain Reflectometer (optional)Built-in MoCA® Test Set (optional)Linear Distortions Test Suite (optional)Additional FunctionsMulti-user supportMulti-language supportCreate work orders right on the meterBuilt-in web browser, real-time data transmissionInteractive home certification process
360 DSP - Operation Manual, Wi-Fi Option12Equipment Supplied with the 360 DSPThe 360 DSP comes with the following:360 DSP Next Generation Certification MeterBuilt-in batteryProtective Carrying Case with Shoulder StrapAC to DC Power Adapter & Battery ChargerAC US Power CableOperation manual on CD
360 DSP - Operation Manual, Wi-Fi Option13A Guided Tour of the 360 DSPFront ViewRF Input ConnectorTouch Screen LCDSoft KeysBack ButtonArrow ButtonsPower ButtonEnter ButtonFunction Button
360 DSP - Operation Manual, Wi-Fi Option14Rear ViewRF Input ConnectorOptional Wi-Fi Antenna(Internal - 2 dB Gain)Identification Label(FCC ID & Notice)
360 DSP - Operation Manual, Wi-Fi Option15Bottom ViewTop ViewRF Input ConnectorLED FlashlightOptional Wi-Fi Antenna(Internal - 2 dB Gain)USB Port (Type A)DC Charge PortSystem Reset ButtonEthernet Port
360 DSP - Operation Manual, Wi-Fi Option16THIS  PAGE  LEFT  INTENTIONALLY  BLANK
360 DSP - Operation Manual, Wi-Fi Option17This chapter: Describes the setup of the Wi-Fi OptionWi-Fi Setup ProcedurePerform the following steps to setup the optional Wi-Fi:1. Power on the 360 DSP by pressing the Powerbutton.2. The Welcome screen will appear as shown inthe image to the right.3. Use the touchscreen to select the user profilethat you would like to use.4. By default, the Autotest navigation menu willappear as shown in the image to the right.5. Use the touchscreen to select the Setup softkeyat the bottom of the screen.6. The Setup navigation menu will apper, use thetouchscreen to select the Setup icon as shownin the image to the right.2. Wi-Fi SetupChapter  2
360 DSP - Operation Manual, Wi-Fi Option188. The Meter Configuration screen will appear,use the touchscreen to select the Wi-Fi buttonas shown in the image to the right.9. The Wi-Fi menu will appear, the following itemscan be adjusted within this menu:Prompt User - Use the keypad to selectfrom either of the following options:When set to NO, this will cause theNetwork Manager to automaticallylogin using the current SSID/Password and prevents the user fromadjusting the Wi-Fi settings.When set to YES, this will cause the Network Manager to disable automatic loginand allows the user to select an alternate SSID or Password.Current SSID - This field allows you to set a default SSID to use when Prompt User isset to NO. Use the touchscreen and virtual keyboard to enter a new value.Current Password - This field allows you to set a default Password to use whenPrompt User is set to NO. Use the touchscreen and virtual keyboard to enter a newvalue.10. After making any changes, select the Back button to save your changes and exit to theMeter Configuration screen.
360 DSP - Operation Manual, Wi-Fi Option193. Wi-Fi OperationChapter  3This chapter: Describes the how to use of the Wi-Fi OptionEnable Wi-FiPerform the following steps to use the optional Wi-Fi:1. Power on the 360 DSP by pressing the Powerbutton.2. The Welcome screen will appear as shown inthe image to the right.3. Use the touchscreen to select the user profilethat you would like to use.4. By default, the Autotest navigation menu willappear as shown in the image to the right.5. Press the Function button to display theFunction window and then use the touchscreento select the Network Manager button asshown in the image to the right
360 DSP - Operation Manual, Wi-Fi Option206. The Network Manager window will appear, usethe touchscreen to select the Wi-Fi button asshown in the image to the right.7. If Prompt User is set to NO, the Wi-Fi will automatically try to connect to the default SSID ifit is within range.8.  If Prompt User is set to YES, the Wi-FiSettings window will appear as shown in theimage to the right.Current Password - This field allows you toset the current Password to use for theselected SSID. Use the touchscreen andvirtual keyboard to enter a new value.Current SSID - This field allows you toselect from a list of SSIDs that are in range.Use the arrow keys to select a SSID from the list.Current SSID - After the Password & SSID have been selected, select this button toLogin and enable the Wi-Fi.10. After successful connection to Wi-Fi, the currentnetwork statistics will be displayed as shown inthe image to the right.
360 DSP - Operation Manual, Wi-Fi Option21Disable Wi-Fi1. When the Wi-Fi is enabled, select the Wi-Fibutton again from the Network Managerwindow to disable the Wi-Fi.2. The Continue window will be displayed asshown in the image to the right. Use thetouchscreen to select Yes to disable to Wi-Fi orselect Cancel to exit without disabling the Wi-Fi.2. When the Wi-Fi is disabled, the NetworkManager window will display Unavailable asshown in the image to the right.
360 DSP - Operation Manual, Wi-Fi Option22Wi-Fi Survey ModePerform the following steps to access the Wi-Fi Surveymode.1. Use the touchscreen to select the Utility softkeyat the bottom of the screen.2. The Utility navigation menu will apper, use thetouchscreen to select the Wi-Fi icon as shown inthe image to the right.3. The Wi-Fi Survey screen will be displayed asshown in the image to the right. Use the Arrowbuttons to highlight each of the networksdisplayed.
360 DSP - Operation Manual, Wi-Fi Option234. SpecificationsChapter  4Forward Frequency Tuning Range 50 - 1003 MHzReverse Frequency Tuning Range 4 - 110 MHzAmplitude Measurement RangeAnalog: 40 dBmV to +50 dBmVDigital: -40 dBmV to +50 dBmVReturn < -40 dBmV (Ground Block Test)IF Bandwidth 6 MHZ standard, 8 MHz optionalDeep Interleave Compatibility YesCarrier-to-Noise As per FCC Part 76.605. Carrier and Noise bothmeasured in same analog channel => 50 dBDownstream MER 34 dB for => -6 dBmV RF level,typical: 40 dB for => +6 dBmV RF levelDownstream BER True BER (derived from code words not from MER)Range: 1 E-7 to 1 E-9 for signal => -6 dBmVITU J.83 annex A, B, CCommunications DOCSIS 3.0 Modem (8x4)Bluetooth (optional USB plug in)USB AEthernet (10/100)Wi-Fi 802.11 b/g (optional)Display Color LCD touch screen;480 x 272 pixels (approx 4 x 2.25)Annunciators Audible annunciator for key strokesFlashlight High intensity LED (0.25W)Battery Twin 2600 mAh @ 7.2V LiOn packsCharge Time 3 hoursOperating Time 8 hours continuousMechanical Unit housed in rubber overmolded plastic enclosureOperational Unit controlled via 12 rubber keys and LCD touchscreen and/or via a wireless connection to a mobiledevice such as a laptop, tablet, iPad® or iPhone®, orAndroid® handset
9710 Park Davis DriveIndianapolis,  IN  46235(317)  895-3600www.trilithic.com

Navigation menu