Trilliant Networks SC4120 DUAL BAND 802.11 a/b/g BASED, FIXED WIRELESS NODE User Manual Manual 1

Trilliant Networks, Inc. DUAL BAND 802.11 a/b/g BASED, FIXED WIRELESS NODE Manual 1

UserManual.wiki >

Trilliant Networks >

SC4120 User Manual >

Contents

Manual 1

SkyPilot SkyAccess DualBand Installation

Contents CONTENTS.................................................................................................................................... 3 ABOUT THIS GUIDE ................................................................................................................. 4 OVERVIEW................................................................................................................................ 5 FEATURES AND BENEFITS ............................................................................................................. 5 ABOUT ACCESS POINT CONFIGURATION........................................................................................ 5 SKYPILOT NETWORK TOPOLOGY .................................................................................................. 6 SKYGATEWAY ............................................................................................................................. 7 SKYEXTENDER AND SKYEXTENDER DUALBAND......................................................................... 8 SKYCONNECTOR AND SKYACCESS DUALBAND........................................................................... 8 THE SKYACCESS DUALBAND INSTALLATION KIT ..............................................................11 WHAT THE KIT PROVIDES ........................................................................................................... 12 WHAT ELSE YOU NEED ............................................................................................................... 12 GETTING HELP ............................................................................................................................ 14 INSTALLING A SKYACCESS DUALBAND.............................................................................. 15 PLANNING THE INSTALLATION ................................................................................................... 15 CABLING THE SKYACCESS DUALBAND ..................................................................................... 16 POWERING ON THE SKYACCESS DUALBAND.............................................................................. 19 OPTIMIZING LOCATION............................................................................................................... 21 Confirm signal acquisition.................................................................................................... 21 Verify network connection .................................................................................................... 21 MOUNTING THE SKYACCESS DUALBAND .................................................................................. 24 CONNECTING TO THE WIRELESS NETWORK................................................................................. 26 Connect to the wireless network with Ethernet..................................................................... 26 Connect to the wireless network via a Wi-Fi connection...................................................... 27 CONFIGURING THE SKYACCESS DUALBAND.............................................................................. 28 ACCESSING SKYACCESS DUALBAND COMMAND-LINE INTERFACES.............................. 29 CONNECT TO THE SKYACCESS INTERFACE ................................................................................. 29 CONNECT TO THE ACCESS POINT INTERFACE .............................................................................. 30 FCC REGULATORY INFORMATION....................................................................................... 32 FCC RADIO FREQUENCY INTERFERENCE STATEMENT ............................................................... 32 FCC RADIATION EXPOSURE LIMITS ........................................................................................... 33 SPECIFICATIONS.................................................................................................................... 35

About This Guide This guide explains how to install and set up a SkyPilot™ SkyAccess™ DualBand that provides access to a SkyPilot wireless mesh network and serves as an access point for users of 802.1x wireless (Wi-Fi). This guide assumes administrator-level knowledge of IP networks and a familiarity with configuring wireless devices.

SkyPilot SkyAccess DualBand Installation 5 Overview SkyAccess DualBand is a dual-radio solution that combines SkyPilot’s long- range, high-capacity 5 GHz mesh backhaul with a high-powered 802.11b/g access point that lets service providers and municipalities offer standard Wi-Fi to subscribers. Features and benefits SkyAccess DualBand provides a highly flexible wireless solution that combines scalable Wi-Fi capacity with the seamless coverage of a wireless mesh network. Each SkyAccess DualBand can support multiple WLANs (wireless local area networks), each with its own VLAN and security policy. One SkyAccess DualBand can support several business models with a single service installation. About access point configuration The SkyAccess DualBand access point is set up to provide Wi-Fi access right out of the box. The access point includes a preconfigured WLAN with the SSID (service set identifier) SkyAccessDualBand, providing WPA-PSK (Wi-Fi protected access – pre-shared key) protection. Users attempting to connect to the SkyAccessDualBand WLAN must provide a password (publicpublic by default). The default configuration is provided for initial management and configuration of the SkyAccess DualBand access point via a wireless connection. You should always create a unique access point configuration before testing the device or making it available to customers. 1

SkyPilot SkyAccess DualBand Installation 6 NOTE A wireless network protected by WPA-PSK is vulnerable. To provide a more secure level of protection, configure the WLAN for WPA authentication in which each user is authenticated separately. SkyPilot network topology SkyPilot Networks™ delivers a wireless, end-to-end broadband solution that seamlessly supports high-capacity, high-coverage mesh networks. Designed for managed-access networks and service providers, the SkyPilot network takes broadband wireless the “last mile” with a cost-effective, robust infrastructure solution. Based on a high-performance architecture that deploys intelligent antenna arrays, the SkyPilot network delivers a dynamic broadband solution with significant advantages for business and home users. SkyPilot wireless devices are simple to install and easily fit into any type of wireless environment—metropolitan, business, or home. The auto-discovery and rapid provisioning features of a SkyPilot wireless mesh network greatly reduce deployment and maintenance costs. Support for multiple topologies and high scalability allow attractive options for rapidly expanding a metro Wi-Fi customer base. A SkyPilot network (as illustrated in Figure 1) may include the following physical components: SkyGateway™ (required) SkyExtender™ SkyExtender™ DualBand SkyConnector™ Indoor SkyConnector™ Outdoor SkyAccess™ DualBand

SkyPilot SkyAccess DualBand Installation 7 Figure 1. SkyPilot wireless mesh network SkyGateway The SkyGateway operates as a base station for a wireless mesh network. It provides an interface between wired infrastructure and a wireless network of subscribers who enjoy secure, high-speed access to the Internet or to wide area networks (WANs). A SkyPilot wireless network requires at least one SkyGateway for normal operation. If necessary, you can add additional SkyGateways to increase network capacity or provide redundancy. The SkyGateway typically resides at a location with easy access to wired infrastructure—usually a POP (point of presence) or data center.

SkyPilot SkyAccess DualBand Installation 8 For optimal performance, install the SkyGateway on an elevated site such as a cell tower or the top of a tall building. SkyExtender and SkyExtender DualBand SkyExtenders and SkyExtender DualBands provide a cost-effective way to add capacity and balance network loads, by operating as “repeaters” to extend the wireless range of a SkyGateway (see Figure 1). You can add these devices to your network to expand your coverage footprint and provide redundancy through SkyPilot’s mesh networking features. (A SkyExtender can also provide subscribers with a direct connection to the wireless network via its Ethernet port.) In addition, the SkyExtender DualBand serves as a Wi-Fi access point, enabling service providers and municipalities to provide standard 802.11 wireless access across great distances, for targeted hot zones, or for dense coverage patterns. For optimal performance, install the SkyExtender in an elevated location such as a roof, tower, or utility pole. SkyConnector and SkyAccess DualBand SkyConnectors link your subscribers to the SkyPilot wireless network. An Ethernet port on the SkyConnector enables a connection to be established to the subscribers’ computers, or to a local area network (LAN) via a data switch or router. For flexibility of installation, SkyPilot offers indoor and outdoor versions of the SkyConnector. Designed for installation by the service provider, the outdoor version of the SkyConnector attaches to an external structure such as an eave, roof, or pole. Because it provides a better line of sight to the SkyGateway or a SkyExtender, the outdoor SkyConnector generally offers greater range than the indoor unit. The indoor version of the SkyConnector is a plug-and-play network device that a subscriber can easily install without technical assistance. Service providers should advise subscribers to place the SkyConnector

SkyPilot SkyAccess DualBand Installation 9 in a location with an optimal sight line to the SkyGateway or a SkyExtender. SkyAccess DualBand offers the same features as a SkyConnector, plus a Wi-Fi access point that allows service providers and municipalities to provide standard 802.11 wireless access across great distances, for targeted hot zones, or for dense coverage patterns.

SkyPilot SkyAccess DualBand Installation 11 The SkyAccess DualBand Installation Kit The SkyPilot SkyAccess DualBand must be professionally installed by a trained technician. The kit provides everything needed for the installer to mount and configure the device as both a connector to the wireless mesh network and an 802.11b/g Wi-Fi access point. This chapter reviews the provided equipment to ensure that all parts are present in the kit prior to the technician starting installation. NOTE Professional Installation is required to ensure that the proper antenna is employed such that FCC transmit power limits for this equipment are not exceeded. 2

SkyPilot SkyAccess DualBand Installation 12 What the kit provides Figure 2. Contents of SkyAccess DualBand installation kit SkyPilot also offers accessories, including a tilt mount for optimizing SkyAccess DualBand installation. For more information, contact a SkyPilot sales representative. NOTE The 5 GHz antenna is integrated into the dualband connector housing. The 2.4GHz antenna is the external antenna. What else you need Before starting installation, the following are needed: 5 GHz Antenna

SkyPilot SkyAccess DualBand Installation 13 For basic mounting: A Phillips screwdriver For pole mounting: A magnetic level (optional) A secured steel pole between 1.13" (2.87 cm) and 1.37" (3.48 cm) in diameter For network cabling: A spool of CAT5 network cable (shielded cable is recommended) NOTE Ethernet cabling must comply with the requirements of NEC/CEC codes for outdoor CAT5 cables. The outer jacket of the cabling must be clearly marked as CAT5e per ANSI/TIA/EIA-568-B.2. Ethernet crossover cable (for connecting to data switch or router) RJ-45 connectors (connectors without a protective “boot” are recommended) RJ-45 crimping tool For wireless mesh network configuration: A laptop with a Telnet client application and a 10/100bT Ethernet network interface card Setup information for the access point: A (case-sensitive) wireless SSID for each virtual WLAN Wi-Fi network A unique IP address for the management of the access point if it’s not connected to a DHCP server A default gateway and subnet mask for the management network if the access point is not on the same subnet as your PC NOTE Plan on configuring the SkyAccess DualBand before mounting it. Some steps are easier if the access point is more accessible.

SkyPilot SkyAccess DualBand Installation 14 Getting help For technical assistance, contact SkyPilot support by logging in to customer support at www.skypilot.com.

SkyPilot SkyAccess DualBand Installation 16 The site survey should include an RF scan to identify available frequencies. Check the preferred frequency at all locations; a frequency that’s clear at one location may be crowded at another. Frequency planning is a critical factor in planning and implementing a wireless mesh network. The site survey process should be ongoing. To verify that a site is relatively free of interference, site audits should occur every 6 to 12 months, scheduling regular maintenance visits to coincide with the site audits. Cabling the SkyAccess DualBand Ethernet cabling provides both power and data connectivity for the SkyAccess DualBand. The section provides instructions for attaching CAT5 cable to the device. 1 Terminate the appropriate grade and length of CAT5 cable with an RJ-45 connector and plug it into the RJ-45 port on the back of the SkyAccess DualBand.

SkyPilot SkyAccess DualBand Installation 17 Figure 3. Connecting CAT5 cable to the SkyAccess DualBand Make sure the fit is snug so that the cable does not interfere with the weather gasket. 2 Insert the weather gasket and secure the metal cover. Press the CAT5 cable into the gasket and insert the gasket into the housing, taking care not to twist or place unnecessary force on the RJ-45 connector. Fit the metal cover over the weather gasket and secure it with the four machine screws supplied in the accessory kit. 5 GHz

SkyPilot SkyAccess DualBand Installation 18 Figure 4. Attaching weather gasket and metal cover 5 GHz

SkyPilot SkyAccess DualBand Installation 19 4 Attach tie wraps to the neck of the weather gasket and tighten them so that they slightly depress the neck. Figure 5. Attaching tie wraps to the gasket neck The tie wraps provide relief from cable strain and ensure a fully weatherproof seal. Powering on the SkyAccess DualBand Prior to mounting the SkyAccess DualBand, power on the unit to use the onboard LEDs to facilitate optimal placement. 1 Connect the SkyAccess DualBand to the power supply, as follows: a. Plug the AC adapter into an AC outlet. b. Connect the Ethernet cable to the port labeled “CPE” on the power injector. c. Plug the AC adapter into the power injector. 5 GHz

SkyPilot SkyAccess DualBand Installation 20 Figure 6. Providing power to the SkyAccess DualBand 2 Check the LEDs on the SkyAccess DualBand. If the connections are correct, the power LED (labeled “PWR”) and the WAN activity LED (labeled “WAN Act”) on the SkyAccess DualBand will illuminate. The WAN Act LED should blink and turn off, but the PWR LED should remain lit. Figure 7. Checking the SkyAccess DualBand LEDs 5 GHz