Trilliant Networks SD1085 Tri-Band 2.4GHz/5GHz Wireless LAN User Manual gwexi fcc
Trilliant Networks, Inc. Tri-Band 2.4GHz/5GHz Wireless LAN gwexi fcc
manual
SkyGateway/SkyExtender Installation and Setup | 37
FCC Statements
FCC Class A Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Class B Notice
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to part 15/90 of the FCC Rules. These limits are designed
to provide reasonable protection against interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and if not
installed, and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
B
38 | Appendix B FCC Statements
This equipment has been certified to comply with the limits for a class B
computing device, pursuant to FCC Rules. In order to maintain compliance with
FCC regulations, shielded cables must be used with this equipment. Operation
with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and
modifications made to the equipment without the approval of manufacturer
could void the user's authority to operate this equipment.
Maximum Permissible Exposure
In order to meet Industry Canada, FCC and other regulatory requirements for RF
Exposure, the SkyGateway and SkyExtender units must be located a minimum of
68.4 cm (26.9 inches) from all persons.
FCC 15.203 statement
Because DualBands and TriBands use standard RF connectors for the external
removable antennas, professional installation is required.
Regulatory Statements for Canada
IC RSS-210 statements
This device complies with Class A Limits of Industry Canada. Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause
undesired operation of the device.
SkyPilot Networks SkyGateway devices are certified to meet the requirements of
RSS-210 for 5 GHz. Use of this device in a system must follow the Canadian
regulations. For further information, contact your local Industry Canada office.
Regulatory Statements for Canada | 39
To reduce potential radio interference with other users, choose an antenna type
and and gain that ensures that equivalent isotropically radiated power (EIRP) is no
more than what is permitted for successful communication.
This device is designed for operation with internal antennas having a maximum
gain of 18 dBi. Antennas displaying a gain greater than 18 dBi are strictly
prohibited for use with the SkyPilot device. (Required antenna impedance is 50
ohms.)
NOTE High power radars are allocated as primary users (meaning they have
priority) of the 5650 5850 MHz band, and, these radars could cause
interference and/or damage to LE-LAN devices.
The SkyExtender is equipped with a pair of detachable antenna for the optional
Dual Band and Tri Band modes.
In addition to the provided antennas, SkyPilot SkyExtender DualBand devices can
also operate with the external antenna models for the 2.4 GHz band listed in Table
B-1, or the same type of antenna with a maximum gain of 7.4 dBi. Antennas not
included in this list or having a gain greater than 7.4 dBi are strictly prohibited for
use with this device. (Required antenna impedance is 50 ohms.)
Table B-1. Antennas approved for use SkyExtender DualBand:
A SkyPilot SkyExtender TriBand uses the 4.9 GHz band.
Prior to operating thes devices, users are legally required to obtain frequency
licenses from their local communications governing agency. Operating
parameters are defined by the certification requirements of the device and the
limitations listed on the user license. Any of these guidelines may affect the
installation and operation of this device.”
Manufacturer Model
Comet SF245
Comet SF245+12
Comet SF245+12x
40 | Appendix B FCC Statements