Contents
- 1. Users Manual
- 2. User Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 815688 |
| Application ID | 1DdVBRPGp1z0ul8xZ+YWjg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 48.78kB (609706 bits) |
| Date Submitted | 2007-07-13 00:00:00 |
| Date Available | 2007-07-13 00:00:00 |
| Creation Date | 2007-07-09 13:09:50 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2007-07-09 13:09:50 |
| Document Title | Microsoft Word - Nomad Eng insides rev5 with carrying.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | bobg |
Contents Welcome ...........................................................................1 Device Hardware ..............................................................2 Unit Setup .........................................................................4 Working with the Unit and the Battery.............................8 Settings on your Unit ......................................................15 Communication...............................................................19 Caring for your Unit .......................................................27 Environmental Considerations........................................28 Safe use of your Unit ......................................................29 Environmental Specifications .........................................31 Hardware Specifications .................................................31 Troubleshooting ..............................................................32 Regulatory Information...................................................34 Declaration of Conformity..............................................35 Welcome Congratulations on your purchase of the most powerful and advanced handheld computer available on the market today. The rugged design of your handheld allows you to work in harsh outdoor environments. You can operate your unit in blazing heat, subzero cold, driving rain, or dusty job sites – places you could not take a consumer-grade unit. NOTE: Not all the features discussed in this manual will apply to every unit, as some of the features are offered as options. If the feature described does not apply to your unit, please disregard that section. Device Hardware Front View Front View PDA Keypad Numeric Data Keypad Expansion Cap Expansion Cap Notification LED Battery LED Application Soft Key* Application Soft Key* Start* OK* Notification LED Battery LED Application Soft Key* Application Soft Key* OK* Backspace* Today* Start* Tab* Shift Key* Today* Power Enter Navigation pad Enter* Power The Number pad and Navigation keys shift key accesses the shifted functions For more information about shifted keys, see page 17 *See settings for assignable application buttons (keys) USB I/O Boot MiniUSB USB Host Audio Jack Serial I/O Boot External Power MiniUSB Serial External Power Back View Back View with hand strap Expansion Cap Expansion Cap Battery Door Stylus Holder Hand Strap Battery Door screws I/O Boot I/O Boot Basic Expansion Cap Basic without Cap SD slot CF slot type II 8-pin custom An extended cap, sold as an accessory, can be used for oversized CompactFlash (CF) and Secure Digital (SD) cards. NOTE: Be sure to read the warranty and safety information in this manual prior to using your unit. Unit Setup 1. Install the battery The Lithium-Ion (Li-Ion) battery and battery cover are shipped detached from the unit. Insert the battery into the compartment so the connectors on the battery mate with the pins in the battery compartment, pressing firmly. Place the battery door over the battery, with the flat side of the battery door at the top. Remove the cap from the Philips screwdriver end of the stylus or use a small #1 Philips head screwdriver to finger tighten the four screws in the battery door. NOTE: DO NOT use the screwdriver part of the stylus on the touchscreen or it will scratch your screen. Only use the smooth end of the stylus. IMPORTANT: Fully charge the battery once installed in the unit. The battery gauge may not be accurate until it has been fully charged at least one time. The battery LED (right side of unit) will turn green once fully charged. 2. Charge the battery The AC adapter that ships with your unit has interchangeable AC plugs to fit almost every electrical outlet. Connect the appropriate AC plug to the AC adapter. Plug into an electrical outlet and plug the barrel end of the AC adapter into the unit. The battery gauge may not be accurate until it has been fully charged at least one time and may take up to about 4 ½ hours, depending on the initial state of the battery. A full charge is indicated by the battery LED (right side of the unit) turning green. Warning! Be sure to only use the AC adapter included with your unit. Use of other adapters will void the product warranty. 3. Install the screen protector To keep the touchscreen clean and protected, install the screen protector following the instructions provided on the screen protector package. Unprotected screens become scratched and scuffed over time. Screen protectors extend the life of the display by providing a protective and replaceable barrier between abrasive grit and the surface of the display. Screen damage associated with failure to use a screen protector is not covered under warranty, 4. Attach the hand strap Attach the hand strap to the back case. 5. Turning your unit on and off The unit will boot up when the battery is installed. If not, press and release the green Power key on the keypad. To turn your unit off, press and release the Power key again. One of the most convenient features of your unit is “instant on” and “instant off” (also known as “suspend/resume”). There is no waiting for the unit to boot up every time it is turned on. “Instant on” does not occur on the first boot-up. When the unit first turns on, the message “Tap the screen to set up your Windows Mobile-based device” will appear. 6. Align screen The Align Screen message will display a series of targets to tap in sequence on the screen. Use the stylus to tap the targets firmly and accurately. Sometimes you need to repeat the alignment procedure more than once to provide a satisfactory alignment. 7. Location – time zone Select your time zone location, set the time and date to the correct values and tap Next. 8. Password – lock (optional) You do not have to provide a password unless you are concerned about unauthorized use. To eliminate using a password, tap Skip. If you opt for password protection the password must be entered every time you turn the unit on or use the Power key to resume operation. WARNING: BE CERTAIN TO REMEMBER THE PASSWORD. The only way to recover from a forgotten password is to perform a Clean Boot and you will LOSE all application software, licenses, settings and data on your unit. See page 12 about how to perform a Clean Boot. 9. Using the expansion ports To access the expansion ports, use the Philips screwdriver end of the stylus or a small #1 Philips head screwdriver to rotate the two quarter-turn fasteners and remove the Expansion Cap. Under the Expansion Cap is a Secure Digital (SD) expansion slot. (Windows Mobile® 6 will not recognize storage cards greater than 2GB). There is also a CompactFlash (CF) type II slot and an 8-pin custom connector (for third-party developers). Gently insert cards with the front of the card facing toward the display side of the unit. Insert the card into the slot and release; the card should catch in the slot. Always push the card in straight, never at an angle or forced. SD slot CF slot type II To eject an SD card, gently press the top of the card to release it. To eject a CF card, press the eject button located next to the CF. NOTE: DO NOT use the unit without reattaching the cap and the boot. The unit is NOT sealed when the cap or boot is off and water damage can occur, voiding the warranty. 10. I/O Boots There are two types of Boots available. The boots can be swapped by loosening the screws pointed out in the picture below. MiniUSB USB I/O Boot Serial I/O Boot Screws to swap Boot Screws to swap Boot USB Host Audio Jack External Power Pin 1 MiniUSB Pin 6 Pin 9 Pin 5 Power Serial Both boots have a mini-USB connector that uses a USB 2.0 A male to mini USB B 5-pin cable (included with the unit). The Mini-USB can be used to connect to a personal computer (PC). USB I/O Boot: Has a USB host port to connect to USB client devices. Has an audio jack that is wired for a headset with a mono speaker(s) and mic combination. It is not for stereo headsets. Note: Many USB host peripheral devices supported on personal computers are not supported by this unit. There are two classes of USB devices that have native support in the OS: 1.) USB Human Interface Devices (HID) examples include keyboards and some barcode scanners. 2.) USB Mass-Storage devices examples include memory-keys, hard disks, some digital cameras, and memory card readers. Before purchasing a USB peripheral, check with the manufacturer to ensure that it will operate with one of these natively supported USB classes. Some devices have no applicability in Windows Mobile. For example, mice do not make sense to use with your unit because it is designed to be touchscreen operated. Serial I/O Boot: For use with serial devices. NOTE: COM1 is always reserved for the 9-pin port, even if you don’t have a unit with a serial boot. Working with the Unit and the Battery Battery life: The Lithium-Ion (Li-Ion) battery life is dependent upon the application and operating environment. Frequent keypad and display backlight usage, heavy usage of the Wireless LAN (WLAN), cold temperatures, GPS, and high power consumption CF and SD devices can all significantly reduce the battery life. Other factors that may have some impact on battery life include heavy usage of the Bluetooth radio and heavy processing by the CPU, but these factors are typically less significant. Tips for extending the battery life: - Keypad backlight: The default is off. This backlight uses a lot of power so use only when necessary. For information on changing the backlight settings, see page 16. - Display backlight: The default is on. Minimize the amount of time the backlight stays on when idle. Dim the backlight to only as bright as required to view the display. - Wireless LAN: If your unit comes with embedded WLAN, use ONLY when necessary. Turn off when not needed. - Cold temperatures: Keep the unit as warm as possible. If feasible, keep it inside your coat or a vehicle when not in use. - GPS: Ensure that the GPS-aware applications that communicate with the GPS are closed when not being actively used. The Today screen tells if the GPS is running. - Expansion ports: Use low-power consumption CF and SD cards and use them only when necessary. - Auto features: Tap Start / Settings / System / Power / Advanced. Make sure the unit is powered off when not in use with the shortest amount of time. Charging the battery: The battery can be charged in the unit or separate from the unit with an external battery charger, sold as an accessory. Connect the appropriate AC plug to the AC adapter. Plug into an electrical outlet and plug the barrel end of the AC adapter into the unit. The unit will be fully charged in about 4 to 4.5 hours. A full charge is indicated by the battery LED (right side of the unit) turning green. The manufacturer recommended temperature range for charging the battery is between 0°C and +45°C (+32°F and +113°F). If the battery temperature is outside of this range, the battery will not charge. Warning! Be sure to only use the AC adapter included with your unit. Use of other adapters will void the product warranty. Battery Status (right LED) Color Off Solid yellow Solid green Blinking yellow Function On battery power Charging on AC adapter Fully charged on AC adapter Battery fault during charging (temperature out of range, defective or missing battery) Changing the battery: The battery is designed to be quickly changed (if you have additional batteries). The unit saves enough power that if you swap the battery within approximately one minute, it will not trigger a reset. If the saved power runs out before the new battery is installed, the unit will reset. This will not impact saved data, programs or configuration, however unsaved data will be lost and the time will need to be reset. To change a battery, perform the following steps: 1. Close open applications and save data in case the battery exchange takes too long. 2. Remove the hand strap from the unit. 3. Turn the unit off using Replace Battery (ensures that alarms will not wake up the unit while changing the battery). Press and hold the Power key and tap Replace Battery. See page 12 about the Power Menu. 4. Use the supplied stylus or a small #1 Philips head screwdriver to loosen the four screws in the battery door. 5. Remove the battery from the unit. 6. Quickly insert the replacement battery onto the unit. 7. Place the battery door over the battery, with the flat side of the battery door at the top of the unit. Use the stylus or screwdriver to finger tighten the four screws. 8. Replace the hand strap. 9. Turn the unit ON to resume operation. Calibrating the battery: The battery has an internal gauge that provides an estimate of the amount of energy in the battery as it charges and discharges. If your battery is showing inaccuracy in the power gauge or large jumps in capacity, (i.e. the power is reading 50% and goes dead shortly thereafter) it may need calibration. Tap Start / Settings / System / Power / Calibration to see if the message reads “Calibration recommended” or “Calibration not necessary”. If calibration is recommended or the battery is reporting inaccurately, perform the following: 1. Plug in the AC adapter. The unit MUST stay charging while doing the calibration or you may need to restart the process. 2. Ensure the temperature is between 0°C and +45°C (+32°F and +113°F) while charging. 3. Tap Start Calibration. 4. During the calibration process, the Power key is disabled temporarily and the backlight is turned up to 100%. It takes up to 25 hours to complete the calibration. A notification will state “Calibration is complete”. It is recommended to not use your unit during the calibration process so calibrate when the use of the unit is not required. If you wish to stop the calibration process, tap Start / Settings / System / Power / Calibration / Stop Calibration. Possible error messages that can occur during calibration: Error Message Battery is not charging, aborting Solution Battery temperature may be out of range. Wait until battery temperature settles and try again. Calibration will restart itself. Discharge became invalid, restarting AC power is in an Plug in unit and restart calibration. Try a unknown or uncontrolled different AC adapter and restart calibration. state; aborting If it continues to fail, have the unit serviced. 10 Speaker and microphone Your unit comes with an integrated speaker and a microphone. It also has an audio jack that is wired for a headset with a mono speaker(s) and mic combination. It is not for stereo headsets. To record, tap Start / Programs / Notes. If you do not see the Recording toolbar, tap Menu / View Recording Toolbar. Tap the round record symbol on the screen. The unit will record until Stop is pressed. The recorded file will be saved in the Notes folder. To change the directory where recorded files will be saved, tap the folder icon and navigate to the desired folder. To play the recorded file, tap the desired file from the Notes program. You cannot play and record simultaneously; playback will be disabled during recording. To change the volume or mute all sounds, tap the speaker icon in the status bar of the Today screen. The Today screen The Today screen provides information that you need for the day. Tap an item to view or edit details. To customize which items are shown on the Today screen, tap Start / Settings / Today / Items. Tap to go to a program Tap to view and change connection settings. Tap to change or mute volume Tap to view power settings Tap to change time settings Tap to change WLAN & Bluetooth settings Indicates whether GPS is turned on or off. (not a live link, but informational only) Tap to change owner information Your day at a glance. Tap to open the associated program Application soft keys The screen shows the function of the two application softkeys 11 Power key features The Power key turns the unit on and off and performs a number of additional functions. Turn backlight on/off: To toggle the backlight on or off, hold down the Power key for approximately 1 second. Once toggled off, the backlight will stay off until it is toggled back on. Screen taps and key presses will not cause it to turn on. Power menu: Hold down the Power key for about 3 seconds to display a countdown. Continuing to press the Power key will cause a reset when the countdown reaches zero. If you release the Power key while the countdown is proceeding, you access the following menu. Tap an option or OK to exit. Clean Screen: Disables the touchscreen for cleaning. Press the enter key to re-enable the touchscreen. Align Screen: A series of targets is displayed. Use a stylus to tap each target to align the touchscreen. Replace Battery: Ensures that alarms will not wake up the unit while changing the battery. Shutdown: Closes all running applications and puts the device in its lowest power mode. No file system data is lost, only open or unsaved files will be lost. All registry settings, control panel, personal information and databases are preserved. NOTE: while shutdown, the battery LED does not work but if the AC adapter is plugged in, it will still charge. The GPS will be reset to its default settings if the unit is shutdown for 5 or more minutes. Reset: Restarts a running program that has become unresponsive. No file system data is lost, only open or unsaved files will be lost. All registry settings, control panel, personal information, GPS settings and databases are preserved. Perform a Clean Boot WARNING: All application software, (installed by the factory and the customer) licenses, settings and user data will be cleared if you perform this function! Hold down the Power key to display a countdown. Continue to hold down the Power key until it counts down to zero, followed by a brief appearance of the boot screen. Continue to hold the Power key down. When you see the boot screen a second time (about a second after its first brief appearance), briefly press the right 12 while still holding down the Power key. Release both keys and wait a few moments. A screen will appear warning that if you continue, this operation will clear the persistent store. Follow the instructions on the screen ONLY if you want to completely clear your unit. (GPS applications installed will need to be reinstalled, but GPS settings will be retained unless the unit is shutdown prior to performing a Clean Boot.) Storage memory Unlike many handhelds which can lose data if they lose power, all your data is always stored in non-volatile persistent storage memory. Losing power will not impact saved data or configurations other than the real time clock. This means that you do not have to use a RAM backup utility to protect your data. However, you can lose data by accidentally deleting or overwriting it. As with any computer system, we recommend that you regularly backup your data to removable media or to a PC. Accessing storage memory using file explorer File Explorer (Start / Programs / File Explorer) lets you browse the contents of folders on your unit. To easily delete, rename, or copy an item, touch and hold the item. NOTE: Unlike PCs, Windows Mobile does not support a Recycle Bin. Once a file is deleted, it cannot be recovered. Notification LEDs At the top of the unit are two LEDs that provide status information. The LED states are shown in the following table. LED Color Function Battery Off Status Solid yellow (right LED) Solid green Blinking yellow On battery power Charging on AC adapter Fully charged on AC adapter Battery fault during charging (temperature out of range, defective or missing battery) Notification Off No notifications (left LED) Blinking yellow Appointment/task due 13 GPS Tap Start / Settings / System / System Information / Wireless to see if your unit has a built-in GPS. COM2 is the dedicated hardware port for the built-in GPS and GPS Address shows the COM port. Your unit does NOT come with a GPS-aware application installed. If you want to use GPS capabilities on your unit, you must install a GPS-aware application. The GPS is turned on when a GPS-aware application accesses it and it is turned off when all GPS-aware applications are closed. To see if the GPS is on or off, refer to the Today screen. You cannot modify its state from there. Running the GPS will impact the Nomad’s battery performance, so the GPS should be turned off when not in use. GPS settings: If you only run one GPS-aware application at a time, there is no need to adjust the GPS settings. If you want to use multiple GPS-aware applications to share a single GPS device, change the settings at Start / Settings / System / GPS. For more information on these settings, refer to page 17. Using the stylus Ensure that you DO NOT use the metal screwdriver of the stylus on the touchscreen; it will scratch your screen. Only use the smooth end of the stylus. Use the stylus to navigate and select objects on the screen. • Tap: Tap the screen with the stylus to select or open an item. Tapping is the same as clicking the left button on a PC mouse. • Drag: Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to select multiple items. • Touch and hold: is similar to a right mouse click on a computer and uses pop-up menus to easily select an action for an item. To access a pop-up menu, touch and hold the stylus on an item name. A circle of dots will appear to indicate that a pop-up menu will soon appear. 14 Status indicators Following are some of the status indicators seen on your unit. Icon Description Battery power is low Icon Description Indicates that one or more networks are present. Tap to access an available network Battery power is very low Wireless LAN connected Battery charging Active connection, but not currently synchronizing Battery level Inactive connection to computer or wireless network Battery calibration in progress Synchronizing Instant messages received Synchronizing error Speaker is on E-mail has been received Speaker is off (or in mute position) Pending alarm Settings on your Unit Tap Start / Settings. Tap any of the icons on the Personal, System or Connections tabs to customize the unit settings to your own preferences. Tap OK to exit the settings. Some of the more useful settings are described below. Lock (password) If you want password protection from unauthorized use of your unit, tap Personal / Lock. The password must be entered every time you turn the unit on or resume operation. WARNING: BE CERTAIN TO REMEMBER THE PASSWORD. The only way to recover from a forgotten password is to perform a Clean Boot and you will LOSE all application software, licenses, settings and data on your unit. See page 12 about how to perform a Clean Boot. 15 Buttons (keys) Tap Personal / Buttons. You can assign your favorite programs to several of the keypad buttons. The list of assignable keys is shown on the left hand side with the program that is assigned by default on the right. To reassign a key, select the key you wish to change in section 1 and choose the desired program or action from the pull-down list in section 2. shift key If your unit has the numeric data keypad, the yellow (sticky FN) accesses yellow shifted functions, including the Navigation arrows. There are several settings that can be changed under Keyboard Options. Auto release: Press and release the shift key to access the shifted function for one use. It then goes back to the keytop function. Manual release: This is the default. Press the shift key to toggle it on and off. The shifted function stays on until the shift key is pressed again to input the keytop function. Disabled: The shift key has to be held down while pressing any other key to access the shifted function. Play Sticky Key Sounds: To turn the sound off for sticky key sounds, remove the check in the box. Input Tap Personal / Input. You can change settings related to input method, word completion, voice recording and other options. Today Tap Personal / Today. This screen allows you to customize the Today screen. Backlight for display and keypad Tap System / Backlight. To change the settings: Display backlight: The default is on. Tap Battery Power, External Power and Brightness tabs to change settings. Keypad backlight: The default is off. Scroll by tapping the arrows over to Keypad Battery, Keypad External and Keypad Brightness tabs to change settings. 16 Encryption Tap System / Encryption. To prevent sensitive data on a CF or SD storage card from being used if the card is lost or stolen, files can be encrypted as they are placed on the card and will only be readable on the unit that they were encrypted. If you put a check in the checkbox, the files saved thereafter will only be readable on this unit. It will not be possible to read these files on the storage card by any other device or even from a PC. Files saved on storage cards before enabling encryption will not be encrypted. NOTE: if you perform a Clean Boot on your unit, previously encrypted files on storage cards will no longer be readable by that unit or by any other device, including PCs. GPS Tap System / System Information / Wireless to see if your unit has a built-in GPS If you do, COM2 is the dedicated hardware port and GPS Address shows the COM port. (COM1 is dedicated to the external 9-pin.) To allow your unit to use multiple GPS-aware applications to obtain GPS data simultaneously, your unit can manage access to your GPS. If you are using only one GPS-aware application, the following settings do not need changed. To use multiple GPS-aware applications, tap System / GPS and select the following tabs: Access: The GPS Intermediate Driver is disabled by default. To enable, check the box “Manage GPS automatically (recommended)”. Hardware: If you have an internal GPS in your unit, COM2 is the hardware port dedicated for the internal GPS. Verify COM2 is selected. The internal GPS communicates at 9600 baud by default, though you may need to adjust the baud rate to match the baud rate that the receiver is set to. Programs: Programs that use GPS need to know which port to use to access GPS data. Ensure that the COM port on the GPSaware application is set to the same port as shown in the 17 programs tab. The programs port must be a different port than the hardware port. NOTE: Some GPS-aware applications may not communicate over GPD ports. If you are unable to connect to the GPS using the default GPS settings, you can restore it to factory default settings by performing a shutdown. See page 12. Power Tap System / Power to view the approximate battery power remaining. Tap the Advanced tab and choose the settings for automatically turning off the unit when not in use. Tap System / Power / Calibration to see if the message reads “Calibration recommended” or “Calibration not necessary”. For more information on calibration, refer to page 10. Memory Tap System / Memory to see how much Storage memory (Flash) and Program memory (RAM) is available. Closing programs still leaves them resident in RAM. As more programs are started, available RAM decreases. If RAM resources become low, you can stop programs and remove them from RAM. First, ensure you have saved all your data. To stop a program, tap the tab Running Programs. You can stop individual programs or tap Stop All. Screen Tap System / Screen. The orientation can be changed to landscape for some programs that are not screen aware. To change the size of the text on the screen, tap Text Size to see more content or increase the readability in many programs. System information Tap System / System Information. Unit information can be found here including firmware version, serial number, processor speed, RAM and Flash size, as well as the wireless configurations, and battery and card port information. 18 Communication The unit is equipped with multiple ways to communicate with other devices. Many of these are described in the following sections. Not all the features apply to every unit, as some of the features are offered as options. If the feature described does not apply to your unit, please disregard that section. Connecting to a PC Connecting your unit to a PC allows you to copy files, synchronize information, send and receive e-mail and install applications on your unit. Connectivity software is pre-installed on your handheld unit. You will need to install connectivity software on your PC using the Getting Started Disc that will automatically launch what is needed for your PC depending on the operating system (OS). NOTE: If you have an earlier version of ActiveSync installed on your PC, you will need to upgrade it to version 4.5 prior to connecting to your unit. - Windows XP SP2 or earlier: Microsoft ActiveSync 4.5. (Microsoft Office Outlook 2000 is not supported by ActiveSync 4.5.) - Windows Vista: Microsoft Windows Mobile Device Center ensures that synchronization will work correctly. NOTE: It does not recognize the serial port. You must connect by either USB or Bluetooth. IMPORTANT: Do not connect your unit to the USB port on the PC until after you install connectivity software to your PC. If you prematurely connect the unit to your PC, your PC USB drivers may get into a confused state and will not connect. If you suspect that something like this has happened, uninstall the connectivity software on your PC, reboot, and reinstall. 19 After the connectivity software is installed on the PC, connect the unit to the PC: 1) Connect the USB end of the synchronization cable to the PC. 2) Turn on your unit. 3) Connect the mini-USB end of the cable to your unit. Troubleshooting connection problems 1. Confirm the unit is configured to communicate with the PC. Tap Start / Programs / ActiveSync / Menu / Connections. Confirm the box Synchronize all PCs using this connection is checked and USB is selected from the dropdown list. 2. Try disabling any personal firewall software running on the PC. TCP/IP ports need to be open. 3. Reset the unit. 4. If you have more than one unit, PC and/or cable, testing different combinations of equipment can help isolate the cause of the problem. 5. As noted earlier, if you suspect the unit may have been connected to the PC USB port before the connectivity software was installed, uninstall, reboot the PC, and reinstall. 6. Confirm that the version of connectivity software used on your PC is the same as or later than the one on the Getting Started Disc. 7. Tap Start / Settings / Connections / USB to PC and try changing the check box Enable advanced network functionality. 20 Bluetooth All units come with embedded Bluetooth capability—a shortrange of about 10 meters (30 feet) wireless communications technology that allows your unit to beam (exchange information) with other Bluetooth-enabled devices without a physical connection. Bluetooth settings: tap Start / Settings / Connections / Bluetooth. Mode: To enable Bluetooth, check the box Turn on Bluetooth. If you want other Bluetooth devices to find your unit, also check the box Make this device visible to other devices. Device: tap Add new device to search for other Bluetooth devices. For enhanced security, use passcodes. COM Ports: Available only for Bluetooth-connected devices that support serial (COM) connections. Power: Maintain Bluetooth connections when device is turned off. When checked, BT connections are not terminated on your unit when suspended. When the unit is turned back on, applications can continue to use their BT connections as if nothing happened, provided the other BT device is still connected. NOTE: communication cannot occur with other BT devices while the unit is suspended and the other device may disconnect. Power: Allow Bluetooth activity to turn the device on. When checked, BT connections are also maintained during suspend. If the device on the other end of the connection (existing as well as new requests) sends data, the unit will wake from suspend and reply if necessary. Note: It is strongly recommended that your unit is configured to automatically turn off when not in use. (See the power section on page 18.) Otherwise, a BT device could wake your unit and not suspend again, therefore draining the battery. The details of configuring Bluetooth connections vary depending upon how the other Bluetooth device works. Refer to the other device documentation. 21 Bluetooth file transfer between two units Confirm Bluetooth is enabled on both units, the receiving unit is visible and within close range. Tap Add new device to pair with the other unit. Tap Start / Programs / File Explorer on the unit that will send the file. Browse to the file to be sent, and touch and hold on it. Tap Beam File. Wait for several moments while the sending unit searches for Bluetooth devices in the vicinity. Select the receiving unit from the list, and tap Tap to send. Wait a few moments while the file is transferred. The receiving unit will open a window saying you are receiving data and if you want to stop receiving, tap Cancel. The file will be saved in the My Documents folder. Bluetooth connection with a PC Ensure that your PC has connectivity software installed. See Connecting to the PC on page 19. Ensure that Bluetooth on the PC is enabled and configured to be discoverable. Refer to your PC documentation for instructions. Confirm that Bluetooth is enabled on your unit. Under Bluetooth Settings, the Devices tab, tap Add new device… Wait a few moments while your unit searches for Bluetooth devices in the vicinity. Select the PC from the list and tap Next. For enhanced security, use passcodes. On your unit, confirm that the ActiveSync service is available and check in the check box and tap Finish. Tap Start / Programs / ActiveSync / Menu / Connect via Bluetooth. Bluetooth connection with a printer NOTE: Windows Mobile 6 does not support printing without additional third-party software. 22 If the printer is Bluetooth-enabled via Bluetooth serial profile, it is possible to establish a Bluetooth connection. Refer to the printer documentation to see if a passcode is required. If the wireless printer wants to connect to your unit using Bluetooth, tap no. Confirm that serial port service is available, put a check in the box next to it and tap Finish. Bluetooth-enabled headphone You can use a Bluetooth stereo A2DP headphone only. Bluetooth handsfree audio devices that are typically used with cell phones are not supported. Troubleshooting Bluetooth connection problems If your unit cannot find another Bluetooth device, confirm that the device is within range (less than 10 meters / 30 feet) and no large objects obstruct the path of other Bluetooth-enabled devices. Also confirm that the device is turned on and has been configured to be discoverable as devices such as printers and cell phones are typically not discoverable by default. 23 Wireless LAN If your unit comes with built-in Wireless Lan (WLAN) capability, also known as 802.11, you can wirelessly transmit data to and from your unit by connecting to available access points or hot spots. Once connected, you can access the Internet and other network information, send and receive email and use virtual private networks (VPNs) for secure remote access. To find out if you have WLAN installed in your unit, tap Start / Settings / System / System Information / Wireless. The WLAN is off by default; however the on/off state will persist after a reset. To turn the WLAN on or off, tap WLAN from the Today screen or tap Start / Settings / Connections / Wireless Manager and tap Wireless LAN. The unit will automatically detect wireless networks or hot spots. (There can be a slight delay before it updates.) Turn it off when not in use to save battery power and possibly speed up other processes. If you have trouble with your unit adding a new connection from within the Wireless Manager, tap Menu / Wireless LAN Settings / Add New. Type in the Network name and select connection to Internet or Work and tap ok. Configuring the Work option is usually best left to network administrators. The Internet option is simpler and serves most needs. Depending upon the configuration of the wireless network, you may be prompted to enter a Wireless Encryption Protocol (WEP) key or an Internet login for authentication purposes. Obtain the WEP key from your network administrator. NOTE: The Internet connection is one in which Virtual Private Network (VPN) services are not involved and proxy servers may or may not be utilized. This can include a typical Internet connection through a corporate wireless network. A Work connection allows you to view file shares on a corporate network. 24 If you choose to create an Internet connection, open Internet Explorer Mobile on the unit (Start / Internet Explorer) to browse the Internet. Some features supported by PC browsers are not supported by Internet Explorer Mobile. For instance, there are no pop-up windows, some sites may not be accessible and you may be unable to send e-mail with file attachments. If you choose to create a Work connection, open File Explorer on your unit. Tap Menu / Open Path / New Path to open a window, allowing you to enter the name of a computer on the network on which you want to view file shares. Tap OK. From here, you can browse the network file shares and copy and paste files between PCs on the network and the unit. Exchange ActiveSync Exchange ActiveSync, a component of Exchange Server, facilitates data synchronization between your unit and an Exchange server. This synchronization can occur over WLAN, allowing you to update calendars, contacts, tasks and the Inbox on your unit without directly connecting to a PC. The server must be running Exchange Server 2003 SP2 or later. To use Exchange ActiveSync, confirm with your system administrator that an Exchange Server is available. The administrator will provide you with a login name, password, server name, and domain name. To configure Exchange ActiveSync on your unit, tap Start / Programs / ActiveSync / Menu / Add Server Source. Enter the server address and confirm with your administrator whether the Exchange server requires an encrypted (SSL) connection. Tap Next. Enter the login name, password and domain name and tap Next. Choose the data types you want to synchronize and tap Finish. 25 Troubleshooting WLAN connection problems If the unit seems to be connected to the network, but you are having difficulty using the network connection, tap Start / Settings / Connections / Network Cards / Network Adapters, and confirm that the connection is appropriately configured as either a Work or Internet connection. Additional connectivity Your unit supports several additional kinds of connections. If you do not have embedded WLAN or GPS, you can purchase CF or SDIO cards to add the functionality. The following types of additional connectivity are also possible: Modem: The unit supports dial-up connections to an Internet Service Provider and sending and receiving e-mail with file attachments. You will need to purchase an external modem or a CF modem. Web-enabled cell phones: The unit can connect to the Internet via Bluetooth and Web-enabled cell phones that are compatible with Windows Mobile devices. USB phone connections are not supported. Refer to your phone service provider for more information on establishing Internet connections via your cell phone. For more information on creating these connections, see the Web site listed under reference materials on the cover of this manual. Installing additional software on your unit The unit can run third-party software designed for Microsoft Windows Mobile. If needed, some programs may run better if the screen orientation is changed in Start / Settings / System / Screen. Most third-party software is installed by running a setup program on the PC while the unit is connected with ActiveSync or the Windows Mobile Device Center. Follow the setup instructions that came with your software. If prompted, perform a reset to complete the installation. 26 Caring for your Unit Cleaning the unit Clean the unit with a soft cloth dampened with either water or a diluted mild detergent. If a mild detergent is used, rinse with water to ensure all residue is removed. Do not use any chemical cleaners and do not put the unit in the dishwasher. Care of the touchscreen Use only the included stylus or other devices specifically designed for use with touchscreens. Ensure that you DO NOT use the metal screwdriver end of the stylus on the touchscreen or it will scratch your screen. Only use the smooth end of the stylus. The use of ballpoint pens, nails or other sharp objects to operate the touchscreen will scratch and/or damage the unit. Keep the touchscreen clean by gently wiping the display, using a soft cloth dampened either with clean water or glass cleaner. Do not use abrasive cleaners or apply any cleaner directly to the display. Doing so will void your warranty. Use the screen protectors included with the unit to keep the touchscreen clean and protected, following the instructions provided on the screen protector package. Case vent hole A GoreTex membrane is used at the vent hole to equalize the atmospheric pressure Vent within the unit and to prevent dust, water, hole etc. from entering. The vent must remain clear of any obstruction. Damage to the touchscreen will occur if the vent is covered. Covering the vent with stickers and labels may void the warranty. Mechanical shock The unit is designed to resist damage for drops up to 1.22 meters (4.0 ft). However, you should protect the display from impact, pressure, or abrasive substances that can scratch it or crack it. The unit should not be dropped unnecessarily. 27 Environmental Considerations The unit’s rugged design allows you to run your applications in harsh outdoor environments. Here are some considerations that will help you get the most out of your unit when working in very wet, hot or cold conditions. Water This unit is designed to withstand accidental immersion. To maintain the unit’s water resistant seal, it is important to ensure that the quarter turn fasteners on the cap are clamped. Keep the bottom boot and its connectors as dry as possible. If the boot does get wet, dry off the contacts as much as possible. Removal of the back case torx screws or failure to reattach the cap or boot could cause leakage and will void your warranty. Temperature range The operational temperature range is from -30°C to +60°C (-22°F to +140° F). Although the unit is designed to be rugged, do not leave it in direct sunlight or in a parked vehicle in the sunlight for extended periods. Batteries perform best at room temperatures. The battery also has a very stable capacity as temperatures rise above the human comfort level. However, cold temperatures cause battery life to drop, and the colder the temperature the greater the reduction in available battery life. Under very cold conditions (-20°C / -4°F and below), you can expect your battery life to be shortened. When working in very cold conditions, consider carrying a fully charged, spare battery in a warm place. The unit is designed so that battery replacement can be easily done. The battery performance will improve by keeping the unit and the spare battery warm (for instance, keeping them inside your coat). 28 Safe use of your Unit Carrying the unit Due to radio frequency emissions, it is unsafe to operate the radio with the unit in a holster, dangling from a lanyard, or with any method that keeps the powered unit in very close proximity to the head or torso. For safe operation, carry the unit in your hand with the antennas located at least 20 cm (~8 inches) from the head or torso. Repair Do not attempt to dismantle the unit for repair. There are no userserviceable parts inside. For service, use the contact details listed on the cover of this manual or contact your local dealer. Battery safety • Use only the battery supplied with your unit to power the unit. Use of other power sources could damage the unit, void your warranty and pose safety hazards. • Caution: Do not expose to temperatures above 70 C (158 °F) Do not short external contacts. Do not disassemble or mistreat the battery. Failure to follow those instructions may present risk of explosion, fire or high temperatures. There are no user-serviceable parts in the battery pack. • Handle a damaged battery with extreme care. If the electrolyte comes in contact with your skin, wash the exposed area with soap and water. If it comes in contact with the eye, flush the eye with water for 15 minutes and seek medical attention. • Lithium-Ion batteries are classified by the U. S. Federal Government as non-hazardous waste and are safe for disposal in the normal municipal waste stream. These batteries, however, do contain recyclable materials and are accepted for recycling. AC adapter safety • Use only AC and vehicle adapters intended for the unit. Other external power sources may damage your product and void the warranty. 29 • Make certain the input voltage on the adapter matches the voltage in your location. Make certain the adapter has prongs compatible with your outlets. • AC adapters are designed for indoor use only. Avoid using the AC adapter in wet areas. • Unplug the AC adapter from power when not in use. • Do not short the output connector. 30 Environmental Specifications TEMPERATURE HUMIDITY WATER DROP SAND AND DUST VIBRATION ALTITUDE EMI ROHS COMPLIANT Operation: -30 to +60 C (-22 to +140 °F) Storage: -40 to +70 C (-40 to +158 °F) Shock: MIL-STD-810F, Method 503.4 MIL-STD-810F, Method 507.4 IP67, sealed against accidental immersion (submersible to 1 meter for 30 minutes), MIL-STD 810F, Method 512.4, Procedure 1 MIL-STD-810F, Method 516.5, Procedure IV 26 drops @1.22 m (4 ft.) onto plywood over concrete; 6 drops @-30 C (-22 °F), 6 drops @60 C (140 °F) IP67, sealed against dust, MIL-STD 810F, Method 510.3, Procedure I & 2 MIL-STD 810F Method 514.5, Procedure I & II MIL-STD 810F, to 4572 m (15,000 ft) at a nominal temp. of +23 C (+73 °F), Method 500.4, Procedures I, II, & III Meets FCC class B requirements This product complies with international RoHS regulations Hardware Specifications OS CPU RAM (VOLATILE) FLASH STORAGE MEMORY (NONVOLATILE) DISPLAY KEYPAD BATTERY LIFE BATTERY CHARGING BATTERY CAPACITY I/O BOOTS SOUND EXPANSION PORTS INTEGRATED WIRELESS CONNECTIVITY Windows Mobile 6 Marvel PXA320 XScale® 806 MHz 128 MB DDR SDRAM 512 to 1G MB of nonvolatile Nand Flash storage 480 x 640 pixel (VGA) color TFT with LED backlight PDA or Data Numeric 15 hours continuous room temperature operation with default settings and no embedded radios 4 to 4.5 hours to full charge 5200 mAh Li-ION rechargeable USB Boot: Mini-USB, USB, Audio Jack, Power Serial Boot: Mini-USB, RS-232 serial (9-pin), Power Integrated sealed speaker and microphone. Audio jack is for a headset with mono speaker(s) and mic. Basic: SD slot, CF Type II, 8-pin custom connector All units have Integrated Bluetooth Optional Wireless LAN and GPS 31 Troubleshooting It is critically important that my battery doesn’t fail during a job. Do you have any suggestions? Consider carrying a fully charged spare battery in the field. The unit is designed so that battery replacement can be easily done. How do I delete files? Open File Explorer and browse to the file to be deleted. Touch and hold on the file and tap Delete from the menu that appears. Unlike PCs, Windows Mobile does not support a Recycle Bin. Once you delete a file, it cannot be recovered. How can I tell how much memory is available? Tap Start / Settings / System / Memory to view available free storage and program memory. The screen shot shows 94 MB of storage memory is available for files and 31 MB of program memory is available for running applications. Tap Storage Card to view available memory on memory cards that may be installed. If there is more than one card installed, tap on the dropdown arrow to select the different cards. How can I make the display more viewable? The default backlight brightness is set to about 65 percent of the maximum brightness. Tap Start / Settings / System / Backlight / Brightness, and adjust the slider to increase display brightness; however, doing this will reduce battery life. You can also change background theme found under Start / Settings / Personal / Today. Confirm that you have only one screen protector in place. 32 Can I use my SDIO device with my unit? SDIO devices work as long as they are supported with Microsoft Windows 6 drivers. An extended cap, sold as an accessory, can be used for oversized SD cards. How can I see file extensions or file attributes? The File Explorer included in Windows Mobile does not have any support for viewing file extensions or attributes like the Windows Explorer program on a PC. There are two ways to get around this limitation. You can connect the unit to your PC and browse from the PC to view file extensions and attributes. (Refer to Connecting to a PC on page 19 for details.) Alternatively, third-party file management programs are available for Windows Mobile devices that may support a Recycle Bin as well as viewing file extensions, file attributes, zip archives and more. Can I work with Microsoft Office files in Word Mobile and Excel Mobile? Office Mobile applications are trimmed down versions of the PC Microsoft Office applications that allow you to view simple documents and to make simple changes on your unit. However, they do not support all of the formatting and other features that are supported by the PC applications. Can I use my USB memory stick (or mouse, keyboard, cell phone or other USB device) with my unit? Memory sticks and many other USB devices will work. Other USB devices may require special drivers that must come from the device manufacturer. Check with the device manufacturer to see if the device is supported under Microsoft Windows Mobile. 33 Regulatory Information U.S.A. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Canada This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par le Ministère des Communications du Canada. 34 Declaration of Conformity Europe According to ISO / IEC Guide 22 and EN 450 14 Manufacturer’s Name: Manufacturer’s Address: Tripod Data Systems, Inc. 345 SW Avery Ave. Corvallis, OR 97333 USA Declares, under our sole responsibility, that the product: Product Name: Handheld Data Collector Model Number: Nomad Product Options: ALL conforms to the following Product Specifications: R&TTE Directive 1999/5/EC ETSI EN 300 328 V1.6.1 (2004) ETSI EN 301 489-1 V1.5.1 (2004) ETSI EN 301 489-17 V1.2.1 (2002) EN 55022 (1998) CISPR 22 (2005) EN 55024 (1998), Amendments A1:2001, A2:2003 EN 60950-1 (2001) CFR 47, Part 15, Subpart B EN 61000-3-2 (2000) EN 61000-3-3 (2001) EN 61000-4-3 (2002) EN 61000-4-2 (2001) EN 61000-4-4 (2004) EN 61000-4-5 (2001) EN 61000-4-6 (2004) EN 61000-4-11 (2004 Supplementary Information: In addition, the product is battery powered and the AC adapter provided with this product has been certified to IEC 60950 +A1, A2, A3, A4, A11. As manufacturer, we declare under our sole responsibility that the equipment follows the provisions of the Standards stated above. Corvallis, OR USA CAUTION: Only approved accessories may be used with this equipment. In general, all cables must be high quality, shielded, correctly terminated and normally restricted to two meters in length. AC adapters approved for this product employ special provisions to avoid radio interference and should not be altered or substituted. Unapproved modifications or operations beyond or in conflict with these instructions for use may void authorization by the authorities to operate the equipment. 070807 35
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2007:07:09 13:09:50-07:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2007:07:09 13:09:50-07:00 Format : application/pdf Title : Microsoft Word - Nomad Eng insides rev5 with carrying.doc Creator : bobg Document ID : uuid:a343c1ea-bb9d-42fc-b3ae-1920eb286bd7 Instance ID : uuid:b0721b58-f6dd-4a9a-b9df-bea9081cdf3f Page Count : 35 Author : bobgEXIF Metadata provided by EXIF.tools