Trimble WCSNM941 Connected Site Gateway User Manual

Trimble, Inc. Connected Site Gateway SNM941 Connected Site Gateway Installation Guide

a href="https://usermanual.wiki/Trimble" itemprop="url"> Trimble >

User Manual Draft_SNM941_InstallGde_1.2EDITS.pdf

Version 1.2Revision AOctober 2017SNM941CONNECTED SITE GATEWAYINSTALLATION GUIDETRANSFORMING THE WAY THE WORLD WORKSDRAFT
SNM941 Connected Site Gateway Installation Guide | 2Legal NoticesCorporate OfficeTr i m b l e  I n c.935 Stewart DrivePO Box 3642Sunnyvale, CA 94085USAwww.trimble.comCivil Engineering and ConstructionTr i m b l e  I n c.10368 Westmoor DriveWestminster, CO 80021USA800-538-7800 (toll free in USA)+1-937-245-5600 Phone+1-937-233-9004 Faxwww.trimble.comCopyright and Trademarks© 2017, Trimble Inc. All rights reserved. Trimble, the Globe & Triangle logo, and Connected Site are trademarks of Trimble Inc, registered in the United States and in other countries. VisionLink is a trademark of Trimble Inc.Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners.Release NoticeThis is the October 2017 release (Revision A) of the SNM941 Connected Site Gateway Installation Guide. It applies to version 1.2 of the SNM941 Connected Site Gateway.Limited Warranty Terms and ConditionsSee Limited Warranty Terms and Conditions, page 35.Software Components NoticesSee Software Components, page 36.NoticesTrimble SNM941-90 – LTE, BLE, Wi-Fi – AmericasFCC Identifier: PWR-WCSNM941 Trimble SNM941-90 complies with FCC radiation exposure limits set forth for an occupational/controlled environment. This equipment should be operated with a minimum distance of 20cm between the radiator and your body or another transmitting antenna.The marketed product name is SNM941. The -90 variant of the SNM941 is certified for use with the Trimble GNSS, 112057.In order to maintain compliance with FCC RF exposure requirements,the Trimble SNM941 antenna, 112057 must be used.Class A Statement – Notice to UsersThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and the receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission rules.CanadaThis Class A digital apparatus complies with Canadian RSS-GEN, RSS-247Cet appareil numérique de la classe A est conforme à la norme RSS-GEN, RSS-247 du Canada.I Pour SNM941-90:Trimble SNM941-90 conforme à l'exposition de l'industrie rayonnement Canada limites établies pour un travail / environnement contrôlé. Cet équipement doit être utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps ou une autre antenne d'émission.Trimble SNM941-90 est certifié pour une utilisation avec l’antenna Trimble 4-In-1, 112057.Afin de maintenir la conformité aux exigences d'exposition aux RF IC, l'antenne Trimble SNM941, 112057, doit être utilisée.Types d'antennes sont approuvés:GNSS 4-In-1 antenna, 112057Trimble SNM941-90 complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Under Industry Canada regulations, this radio transmitter may only operate using Trimble SNM941, 112057.Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne Trimble SNM941, 112057.This radio transmitter has been approved by Industry Canada to operate with the antenna types listed.Le présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés.Industry Canada Identifier: 1756A-SNM941Trimble SNM941-60 - LTE, BLE, Wi-Fi - Non AmericasEuropeThe global variant of this product is intended to be used in all EU member countries. This product has been tested and found to comply with the requirements for a Class A device pursuant to European Council Directive 89/336/EEC on EMC and CB Scheme for electrical safety, thereby satisfying the requirements for CE Marking and sale within the European Economic Area (EEA). These requirements are designed to provide reasonable protection against harmful interference when the SNM941 equipment is operated in a commercial environment. Hereby, Trimble Navigation declares that the SNM941 devices are in compliance with the essential requirements and other relevant provisions of CE. DRAFT
Download:
Mirror Download [FCC.gov]
Document ID3612740
Application ID7sEKivqwniYj8TXln5Rnqw==
Document DescriptionUser Manual Draft_SNM941_InstallGde_1.2EDITS.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize108.01kB (1350122 bits)
Date Submitted2017-10-20 00:00:00
Date Available2017-12-04 00:00:00
Creation Date2017-10-06 11:44:13
Producing SoftwareAcrobat Distiller 10.1.16 (Windows)
Document Lastmod2017-10-10 09:41:45
Document TitleSNM941 Connected Site Gateway Installation Guide
Document CreatorFrameMaker 2015.2
Document Author: Trimble Inc. - Technical Publications
FCC ID Filing: JUP-WCSNM941

Navigation menu