Trinus Systems TDSS-2400T DIGITAL TRANSMISSION SYSTEM HANDSET User Manual TDSS2400 fcc with block
Trinus Systems Inc. DIGITAL TRANSMISSION SYSTEM HANDSET TDSS2400 fcc with block
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 828458 |
| Application ID | Xrb/w/Ko9r3TRb/8CjhdNQ== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 33.39kB (417336 bits) |
| Date Submitted | 2007-08-13 00:00:00 |
| Date Available | 2007-08-13 00:00:00 |
| Creation Date | 2007-08-08 11:39:17 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2007-08-10 16:39:22 |
| Document Title | Microsoft Word - TDSS2400 fcc_with block_.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | isv |
2400MHz DSSS DIGITAL Transmitter/Docking MODEL : TDSS2400 USA VERSION User’s Manual TRINUS CO.LTD 2.4GHz DSSS DIGITAL Transmitter/Docking MODEL : TDSS2400 USA VERSION FCC NOTICE This DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED PERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, my cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. - Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’'s authority to operate the equipment. WIRELESS TRANSCEIVER SYSTEM TDSS-2400 User’s Guide INSTALLATION - Connect the battery pack to TX Set and switch the power ON (located on the bottom of TX unit) - Install the bracket by using the screws - Connect the antenna to the RX Set - Slide RX Set onto the Bracket - Connect the RJ-45 cable to RX Set - Prior to use, charge the unit by placing TX set in the RX set for at least for 8 hours - Place TX in RX to match ID - Connect the microphone to TX set THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE CONDITION THAT THIS DEVICE DOES NOT CAUSE HARMFUL INTERFERENCE. 2400MHz Series ● Read this user’s guide carefully for safe operation and proper use of the product ● Features and specifications are subject to change without notification. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. OPERATION (TX) OPERATION (Cradle) Rec ON/OFF Internal MIC BEEP Microphone Jack MODE MUTE ON/FF Internal MIC 1. Rec On/OFF: Talk ON – BLUE LED Rec on Blinking Out Of Range – RED LED Fast Flickering Low Battery – RED LED Slow Flickering 2. Beep: Beep Tone 3. Mode: Beep > Vibration > Beep + Vibration > NO action Every time you push the button, mode will be automatically changed in order. (This Function operate only at St-by mode) * Rec On/Off, Out of range, Low battery 4. Mute On/Off: When user want to mute the voice in the Communication. Press the button to mute and Press the button again to unmute. 5. Power On/Off: Turn on/off the power of unit. When this is turned off, Unit will not work. * Internal MIC is built in. * Microphone Jack Antenna connection Recording ON/OFF ID Matching Battery Charging Status Charging PIN RJ-45 Jack 1. Antenna Connection: 2. Rec On/Off BLUE LED : - Green LED : Recording on / OFF 3. Battery Status and Communication Status - RED LED: Battery Charging - Flickering Green LED: Communication On/Off - Green LED: Battery is fully charged 5. RJ45 Jack for the cable PIN DESCRIPTION RJ-45 Connector Pin Description Pin# 1: VCC, DC power (10V ~ 16VDC) Pin# 2: GND Pin# 3: Audio Signal Pin# 4: Audio Signal GND Pin# 5: GND Pin# 6: VCR ON Pin# 7 : 0V when TX is ON, 5V when TX is OFF. Use this pin for recording trigger (Recording Trigger) Normal “H” 5.0V 0V Pin# 8 : FULL UP 5V 470 OHM TX unit is oFF
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 5 PDF Version : 1.6 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:26ca78ce-7411-428b-b284-4c65a91cc83f Modify Date : 2007:08:10 16:39:22+09:00 Create Date : 2007:08:08 11:39:17+09:00 Metadata Date : 2007:08:10 16:39:22+09:00 Document ID : uuid:960d4b81-86e3-4c41-9a58-05c5a6e16b9a Format : application/pdf Title : Microsoft Word - TDSS2400 fcc_with block_.doc Creator : PScript5.dll Version 5.2 Author : isv Producer : Acrobat Distiller 5.0 (Windows)EXIF Metadata provided by EXIF.tools