Trio Datacom ER450-XXF01 Remote Radio Data Modem User Manual ER Leaflet
Trio Datacom Pty Ltd (a wholly owned company of Schneider Electric) Remote Radio Data Modem ER Leaflet
Contents
Advertising Material
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 340236 |
| Application ID | 2UhYUVg4eNyUYsfDyM0Njg== |
| Document Description | Advertising Material |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 7.41kB (92663 bits) |
| Date Submitted | 2003-07-15 00:00:00 |
| Date Available | 2003-07-15 00:00:00 |
| Creation Date | 2003-05-22 14:34:18 |
| Producing Software | Acrobat Distiller 4.05 for Macintosh |
| Document Lastmod | 2003-05-22 14:35:22 |
| Document Title | ER Leaflet |
| Document Creator | QuarkXPress(tm) 4.11 |
| Document Author: | Thomae |
Remote Data Radio - ER450 E Series Features and Specifications Trio DataCom’s ER450 is an advanced high speed digital data radio modem designed for the most complex and demanding requirements in both Point-to-Point and Point-to-Multipoint (Multiple Address Radio) SCADA and telemetry applications. The powerful and flexible ER450 is part of the high performance E Series data radio system products that includes the EB450 Advanced Base / Repeater and the EH450 Hot Standby Base / Repeater stations. Features Radio and Modem - Fully integrated radio, modem and data multiplexer - True 19,200 bps over-air data rates (also 4800 and 9600 bps) - Fast data turnaround - Simplex, Half Duplex and Full Duplex - Broad frequency range with fully synthesized all digital radio design - Full specification operation from -30° to + 60°C (+70°C option) - Compact, rugged diecast alloy housing - Low power consumption with sleep mode operation - Insurance against obsolescence with field upgradeable firmware in flash memory - Multi-function LED Front Panel Status Display - Digital orderwire option Data Ports - Two independent configurable data ports and separate system port - Compatible with most industry standard data protocols. eg: MODBUS, DNP-3, IEC 870 etc. - Selectable 300 -76.8 k bps asynchronous RS-232 interface - Multistream™ simultaneous data streams allow for multiple vendor devices/protocols to be transported on the one radio network - Flexible data stream routing providing optimum radio channel efficiency - Internal repeater operation - buffered store and forward - Unique integrated C/DSMA collision avoidance technology permits simultaneous polling and spontaneous alarm reporting operation in the same system Network Management Remote Diagnostic option (In conjunction with TView+™ Software) - Exceptional network management tools - Over-the-air user configuration - Transparent Operation - simultaneous with user data - Network wide operation from any radio terminal Innovative and sophisticated digital communications designs product s and solutions Remote Data Radio - ER450 E Series Radio Diagnostics (Optional) Frequency Range: 330-520 MHz (various sub-frequency bands available) Network wide operation from any remote terminal. Frequency Splits: Various Tx/Rx frequency splits - programmable Non intrusive protocol - runs simultaneously with the application. Channel Selection: Dual synthesizer, 6.25 kHz channel step Over-the-air re-configuration of user parameters. Channel Spacing: 12.5 or 25 kHz Programmable exception reporting of alarms. Frequency Accuracy: ±1ppm (-30 to 60°C) (-22 to 140°F) ambient, Optional (-30 to 70°C) (-22 to 158°F) Aging: <= 1ppm/annum Connections Configuration: All configuration via Windows based software User Data Ports: 2 x DB9 female ports wired as DCE (modem) Compliances: ETSI EN300113, EN301489 FCC PART 15, PART 90 IC RS119, ICES-001 ACA AS4295-1995 System Port: RJ45 for diagnostic, configuration and re-programming Transmitter Power: 2 pin locking, mating connector supplied Modulation: User configurable narrow band digitally filtered binary GMSK or 4 level FSK Tx Keyup Time: <1mS Timeout Timer: Programmable 0-255 seconds regulatory conditions. Performance data indicates typical values related to the LED Display: Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs (for both port A and B) Modem Data Serial Port #1: RS232, DCE, 60076,800 bps asynchronous Data Serial Port #2: RS232, DCE, 30038,400 bps asynchronous PTT Control: Auto (Data) / RTS line (Port A or B) / System Port Override System Port: RS232, 19,200 bps asynchronous Receiver Flow Control: Selectable hardware / software / 3 wire interface Selectivity: Better than 80 dB RF Channel Data Rate: 4800/9600/19,200 bps Half / Full duplex* Intermodulation: Better than 75 dB Data Buffer: 16 kbyte of on-board RAM Spurious Response: Better than 80 dB Bit Error Rate: < 1x10-6 @ -110 dBm (4800 bps) < 1x10-6 @ -108 dBm (9600 bps) < 1x10-6 @ -106 dBm (19,200 bps) AFC Tracking: Digital receiver frequency tracking the performance and suitability of individual responsibility of the buyer to confirm these Antenna: N female bulkhead. Separate N (Tx) and SMA (Rx) connectors for full duplex.* Tx Spurious: <= -37 dBm Sensitivity: -118 dBm for 12 dB SINAD versions in different countries. It is the In-built Error Rate testing capabilities. Operational Modes: Simplex, Half duplex or Full duplex* Tx Power: 0.1 - 5W (+37 dBm) ±1 dB User configurable with over-temperature and reverse power protection Local regulatory conditions may determine Storage of data error and channel occupancy statistics. Mute: Programmable digital mute Collision Avoidance: Trio DataCom’s unique supervisory channel C/DSMA collision avoidance system Multistream™: Trio DataCom unique simultaneous delivery of multiple data streams (protocols) Data Turnaround Time: <10mS Firmware: Field upgradeable Flash memory General Power Supply: 13.8 Vdc nominal (10-16 Vdc) Transmit Current: 750 mA nom. @ 1 W 1600 mA nom. @5 W Receive Current: <125 mA nom Sleep Mode Hardware: External control, < 1 mA Software: User configurable modes Dimensions: Rugged Diecast Enclosure 170 x 150 x 42mm 6.7 x 5.9 x 1.65 inches With Mounting Plate 190 x 150 x 47mm 7.5 x 5.9 x 1.85 inches Mounting: Fitted Mounting Plate Weight: 1.27 kg (2.8lbs.) Options ERFD450 Full Duplex Operation with separate N (Tx) and SMA (Rx) connectors DUPLX450BR External Duplexer, Band Reject (for single antenna operation) EDOVM Digital Order Wire Voice Module NEMA 4/R Stainless Steel Enclosure (IP65, NEMA 4 rated) TVIEW+™ Configuration, Network Management and Diagnostic Windows GUI Software DIAGS/E Network Management and Remote Diagnostics Facilities per Radio Modem Related Products EB450 Base Station EH450 Hot Standby Base Station 95MSR 6 and 9 Port Stream Router Multiplexer described unit. Information subject to change without notice. Copyright 2003 Trio DataCom Pty Ltd. * With ERFD450 full duplex option plus external duplexer for single antenna operation All rights reserved. Issue 05/03 Head Office 41 Aster Avenue, Carrum Downs Victoria, Australia 3201 Phone +613 9775 0505 Fax +613 9775 0606 sales@trio.com.au www.trio.com.au
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Create Date : 2003:05:22 14:34:18 Producer : Acrobat Distiller 4.05 for Macintosh Author : Thomae Title : ER Leaflet Creator : QuarkXPress(tm) 4.11 Modify Date : 2003:05:22 14:35:22+10:00 Page Count : 2EXIF Metadata provided by EXIF.tools