Triple C Designs ASN121 blueGENIUS Wireless Speaker User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	2066585
Application ID	ThYC7ZZeBgIrgTNPDj0EUg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42kB (524957 bits)
Date Submitted	2013-09-09 00:00:00
Date Available	2013-09-09 00:00:00
Creation Date	2013-09-03 13:45:53
Producing Software	Adobe Acrobat 7.0 Image Conversion Plug-in
Document Lastmod	2013-09-03 13:46:18
Document Title	Manual
Document Creator	Adobe Acrobat 7.0

biuGENIUS.
BLLIETDEITH‘EPEAKER 1‘“ MAGNET
Desc pt on ofButtons. m
Before using the bluGENIUS, please takea few minutes to familiarize 3.5mm audio cable:
yourself with the buttons on the speakeras shown below: “a
A / E /C D E F G
U W ”sa‘ha'm‘ab'e:
. . --—a:l
A Play/Pause Music/Phone Bluetooth mode: for Play/Pause
music.
Handslrel mode: for Answer/End
calls.
a NextNol+Musi< Puss Once: Skip to next song.
Press and hold: For volume up.
c Frev/VohMusic Press OncozFor previoussong.
Press and hold: For volume down.
D Power Switch Pow-r Rem Push power switch tn‘ON”: for Line-In
function which allows you to connect
your bluGENlUS directly to device via
included 3.5mm audio cable.
Swltch to "Bluetooth it)": to activate
Bluetooth speaker function and pairing
mode.
Switch to "OFF”: to turn offthe speaker.
E aux Jack Charge/Flay When Charging: plug in use cable.
When Line—in Mode: plug in 3.5mm audio
cable to connect audio devices.
F LED Light Charge/Flay When Charging: Red light will appear.
When fully charged, red light goes off.
When in “Bluetnoth (*i Mode: Blue indis
cator light will blink rapidly when in pairing
mode. Slow blinking indicates pairing is
successful.
G MIC Handslree Microphone
Charging:
Vour bluGENIUS uses a rechargeable battery Fully charge battery before using. Please turn OFF
quGENIUS before charging
l . Use the USB cable provided to connect to any computer/notebook or USB power adaptor.
when charging, the red indicator light will appear.
2. when fully charged, the red. tor light will turn off. charging tim : Approx'mately 2.5hrs.
Turn quGENIUS OFF when not u ng to save battery life. Battery saver will move into sleep mode
when no sound input for more than 20 minutes. Swi h OFF and to Bluetooth (at) mode to restart.
Before using the bluGENIUS, please pair it with your smartphone, MP3 player, Computer or any
Bluetooth-enabled device. Set your Bluetooth device to discover the bluGENIUS by following
the instruction manual for your device. Typically the steps are going to 'Setup‘”Connect” or
“Bluetooth‘ menu and then selecting the option to discover Bluetooth devices.
1.Turn the bluGENIUS to 'Eluetooth (sti' mode. Speaker will automatically begin pairing. The
blue indicator light will blink rapidly. Th ndicates'in pairing mode”.
2. When your Bluetooth-enabled device discovers the bluGENlus. press ”OK” to pair with the
bluGENlUS. Blue indicator will switch to slow blinking to indicate pairing is successful.
Troubleshooting:
- If pairing to bluGENlUS fails, make sure speaker is in pairing mode. If blue light indicator is
not flashing, it indicates speakers is not in pairing mode. Please reset device by turning OFF
and then switching back to ”Bluetooth (W'mode again to restart.
- Ii Bluetooth-enabied device fails to locate bluGENIUS, chedt that the speaker is in pairing mode.
Ensure that your device is within range (within 30leeU10 meters). Restart your bluGENIUS to
reactivate Bluetooth pairing mode. Ensure that your device is not connected/paired to any
other Bluetooth device as the bluGENIUS can only be paired to one device at a time.
Pia
After pairin ed, you can play music irom your Bluetoothsenabled device.
Your bluGENIUS buttons can control music in all the ways detai In "Description of Buttons"
section. PLEASE NOTE: you should set your device on top volume as the bluGENlUS
can not increase the volume higher than the maximum you set on your device.
How to handle calls:
After pairing is established, you can answer/end calls from your Bluetoothenabled smart phone
Your bluGENIUS buttons can control calls in all the ways detailed in ”Description of Buttons"
section. PLEASE NOTE: you should set your device on top volume as the bluGENlUS
can not increase the volume higher than the maximum you set on your device.
How to use Line-in function:
Turn the biuGENIUS to 'ON'and plug 35mm audio cable in. Plug other end into your device.
You can only control the music and volume from your device.
FCC Stateme
This equipment has been tested and found to comply with the limits
for Pan 15 ofthe FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation.This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. Ifthis equipment does cause harmful interference to
radio or television reception,which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
o Reorient or relocate the receiving antenna.
0 Increase the separation between the equipment and receiver.
0 Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
This device complies with part 15 ofthe FCC rules. Operation is subject to the
following two conditions: (iiThis device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Note; Modifications to this product will void the user‘s authority to operate this
equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2013:09:03 13:46:18+08:00
Create Date                     : 2013:09:03 13:45:53+08:00
Metadata Date                   : 2013:09:03 13:46:18+08:00
Creator Tool                    : Adobe Acrobat 7.0
Format                          : application/pdf
Document ID                     : uuid:0d9098c1-a159-4e94-bcfc-201fcaefff54
Instance ID                     : uuid:7600eb7e-bd2c-416f-b689-c1c53c8823e9
Producer                        : Adobe Acrobat 7.0 Image Conversion Plug-in
Page Count                      : 1
Creator                         : Adobe Acrobat 7.0

EXIF Metadata provided by EXIF.tools