Trisquare Communications GMRS380 GMRS Transceiver User Manual GMRS380 OM
Trisquare Communications Inc. GMRS Transceiver GMRS380 OM
Contents
- 1. Users Manual
- 2. Revised Users Manual
Revised Users Manual
GMRS380_OM.qxd 01/15/2002 4:13 PM Page 1 GMRS380 • 8 GMRS / 7 FRS Channels • Battery Level Meter • 38 CTCSS Codes • Channel Monitor • Up to 5 Mile Range* • Channel Scan • Internal VOX Circuitry • Keypad Lock • 5 Selectable Call Tone Alerts • VOX Circuitry • Backlit LCD Display Congratulations on your purchase of the Uniden GMRS380 (General Mobile Radio Service) radio. This product is a lightweight, palm-sized radio. Use it at sporting events to stay in contact with family and friends, hiking, skiing, outdoors, or in a neighborhood watch for vital communication. This compact, stateof-the-art device is equipped with many features. OPTIONAL ACCESSORIES Your package contains the GMRS380 radio, this reference guide, and a product registration card. You may operate the unit using 4 AAA alkaline batteries or the rechargeable NiMH battery pack (not included). The following optional accessories may be purchased from your participating Uniden dealer or call 1-800-554-3988 or visit us on the web at www.uniden.com. Use only Uniden accessories. • Optional Headset Accessories • Headset Jack • Battery Recharge Circuit • Optional NiMH Battery Pack and Charger •Earset Mic w/ PTT - #HS2468 •Vox Headset Mic - #HSV2469 BATTERY LEVEL AND LOW BATTERY ALERT This unit has a battery level meter on the display to indicate the status of the batteries. When the batteries in the unit are low, the battery meter icon will flash and the unit will emit a low battery tone. Replace the alkaline batteries immediately or if you are using the NiMH battery pack, you must recharge the batteries in order to continue using the radio. Warning! To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden accessories specifically designated for this product. USING THE RADIO In order to get the most out of your new radio, read this reference guide completely before attempting to operate the unit. •NiMH Battery Pack - #BP38 Turning the Radio On and Adjusting the Volume •Recharging Cradle - #RC5248 *Range may vary depending on environmental and/or topographical conditions. FOR PURCHASING A UNIDEN PRODUCT THANK YOU FCC GMRS LICENSE The GMRS380 radio operates on the General Mobile Radio Service (GMRS) frequencies which require a Federal Communication Commission license to operate. For licensing information and application forms, visit the FCC online at: www.fcc.gov/wtb/uls or call the FCC hotline at 1-800-418-3676. If you have any questions you can contact the FCC direct at 1-888-225-5322. INSTALL THE BATTERIES Your GMRS380 radio uses 4 AAA alkaline batteries or the optional NiMH battery pack (not included). If alkaline batteries are used, we recommend using high quality alkaline batteries. 1 Antenna 2 Monitor Button 3 PTT Button 4 Up Key 5 Down Key 6 Select Key 7 Speaker 8 On/Off/Volume Control 9 Beltclip 10 Headset Jack 11 Keypad Lock Key 12 Call Key 13 Microphone 14 Battery Cover 15 Battery Level Meter 16 VOX Indicator 17 Scan Indicator 18 Transmit Indicator 19 Channel Indicator 20 Lock Indicator 21 Call Alert 22 Receive Indicator 23 CTCSS Code Choosing a Channel Your radio has 15 channels and 38 CTCSS codes you can use to talk to others. In order to speak to someone, each of you must be set to the same channel and CTCSS code. To choose a channel: With the radio in normal operating mode press the ▲ or ▼ key to increase or decrease the channel number displayed. Each of the channels 1-15 may have any one of the codes 0-38 selected. Code "0" indicates no CTCSS code selected and your radio can receive a signal regardless of the code settings of the transmitting radio. Your GMRS380 radio is equipped with 5 selectable call tones that will be transmitted when the call key is pressed. 1) Enter the Menu. The CTCSS code on the LCD display will flash. 2) Press the ▲ or ▼ key to increase or decrease the code number displayed. 2) Rotate the on/off/volume control clockwise to decrease the speaker volume and turn the unit OFF. To talk to others using the radio: Navigating through the Menu To access the advanced features of the GMRS380, your radio has a Menu function. Talking on Your Radio 1) Press and hold the PTT button and speak in a clear, normal voice about 2-3 inches away from the microphone. While you are transmitting, the TX icon will appear on the display. To avoid cutting off the first part of your transmission, pause slightly after pressing the PTT button before you start talking. 2) When you are finished speaking, release the PTT button. You can now receive incoming calls. While receiving, the RX icon will appear on the display. To install the 4 AAA alkaline batteries: Voice Operated Transmission 1) Make sure your radio is OFF. Your GMRS380 radio is equipped with a user selectable Voice Operated Transmitter (VOX) that can be used for automatic voice transmissions. The VOX feature is designed to be used with a headset with a microphone, but not a remote PTT switch. Transmission is initiated by speaking into the remote microphone instead of pushing the PTT button. 2) Remove the battery compartment door by pressing the tab at the bottom of the compartment door allowing the door to be removed. 3) Install 4 AAA alkaline batteries (not included) into the battery compartment. Be certain to follow the + and - symbols in the compartment. Installing the batteries incorrectly will prevent the unit from operating. 4) Replace the battery compartment door. 1) To enter the Menu, press the select key. 2) Additional presses of the select key will advance you through the menu until exiting to "normal" operating mode. 3) Other methods of exiting the menu function are: a. Press and hold the select key again. b. Press PTT. (Push To Talk) c. Wait 10 seconds until the unit automatically returns to "normal" mode. 3) Exit the Menu. Transmitting a Call Alert Tone 3) Exit the Menu to return to "normal" mode. Your radio emits a beep each time one of the buttons or keys are pressed. To turn this sound OFF, press select while turning on the radio. Repeat this step to turn the sound ON. 2) Press either the ▲ or ▼ key to the desired VOX sensitivity level. Use level 1 for increased sensitivity to voice in normally quiet environments, and use a higher level to reduce undesired activation in very noisy environments. Choosing a CTCSS Code 1) Rotate the on/off/volume control counter clockwise to turn the unit ON and increase the speaker volume. Adjusting the Sound (Key Beeps) be indicated. Level ‘0’ disables VOX, while levels 1-3 set the sensitivity of the VOX circuit. To select the VOX level: 1) Enter the Menu. Advance through the Menu,until the VOX icon appears on 0-3 3) will the display. The current level (0 To select a call tone: 1) Enter the Menu. Advance through the Menu until the CALL icon is shown on the display. The current call tone number 1-5 5) will be indicated. (1 2) Press the ▲ or ▼ key to increase or decrease the number to the desired call tone. Each tone will be heard through the speaker. Keypad Lock To Lock the keypad, press and hold the lock key until the icon is displayed. To remove the keypad Lock, press and hold the lock key until the Lock icon disappears. Auto Squelch Feature The GMRS380 radio is equipped with an automatic squelch system which shuts off weak transmissions and unwanted noise due to terrain conditions or if you have reached your range limit. To temporarily disable the Auto Squelch and monitor the selected channel, press and hold the monitor button. When the monitor button is released, the Auto Squelch will be re-engaged. To persistently monitor the channel between transmissions, press and hold the monitor button until the second confirmation beep is heard. Automatic Power Save Feature Your GMRS380 radio has a unique circuit designed to dramatically extend the life of the batteries. If there is no transmission within 5 seconds, your radio switches to the Power Save mode. The radio is still able to receive transmissions in this mode. 3) Exit the Menu. LCD Backlight To transmit the selected call alert tone, press the call key. The selected tone will automatically be transmitted for a fixed length of time. Channel Scan Feature Your GMRS380 radio has a channel Scan feature that allows you to easily Scan all 15 channels. When an active channel is detected, the unit will pause on that channel until the channel is clear. Then after a 4 second delay, the unit will continue scanning. Pressing PTT while the Scan is paused on a channel will allow you to transmit on that channel. To turn ON channel scanning: Press and hold either the ▲ or ▼ key until the SCAN icon is displayed. The channel number on the display will rapidly cycle through the channels. To turn OFF channel scanning: Press and release either the ▲ or ▼ key. The LCD backlight will automatically turn on when any key is pressed. The LCD display will illuminate for 5 seconds before turning OFF.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2002:01:15 16:14:43Z Modify Date : 2002:04:10 16:59:53-06:00 Page Count : 2 Creation Date : 2002:01:15 16:14:43Z Producer : Acrobat Distiller 3.01 for Windows Author : Laura Cleaver Mod Date : 2002:04:10 16:59:53-06:00 Metadata Date : 2002:04:10 16:59:53-06:00 Creator : Laura Cleaver Title : GMRS380_OM.qxdEXIF Metadata provided by EXIF.tools