Troybilt 020242 User Manual PRESSURE WASHER Manuals And Guides L0501058
TROYBILT Power Washer, Gas Manual L0501058 TROYBILT Power Washer, Gas Owner's Manual, TROYBILT Power Washer, Gas installation guides
User Manual: Troybilt 020242 020242 TROYBILT PRESSURE WASHER - Manuals and Guides View the owners manual for your TROYBILT PRESSURE WASHER #020242. Home:Lawn & Garden Parts:Troybilt Parts:Troybilt PRESSURE WASHER Manual
Open the PDF directly: View PDF 
.
Page Count: 36
| Download | |
| Open PDF In Browser | View PDF |
0
®
d
Pressure Washer / Lavadora de Presi6n
Modem / Modemo 020242
Before using this
produc[_
read this manua[
Safety Rules and Operating
TroyoBiH_O is a registered
TroyoBik®
and follow
Antes de uti[izar e[ producto_ tea este manual y siga todas [as
Reg[as de Seguridad e hstrucdones
de Uso.
aH
hstructions.
Questions_
Preguntas_
Heipiine
= 1=888=611=6708
H-F 8-5 CT
trademark
ofTroyoBilt,
LLC and is used under license to Briggs & Stratton
es una marca registrada de TroyoBilt, LLC y se usa abajo licencia a Briggs & Stratton
BRJGGS
& STRATTON
POWER
JEFFERSON,WiSCONSiN,
8
Printed in USA
PRODUCTS
GROUP,
Power Products.
Power Products.
LLC
UoSoAo
Manual No. 196365GS
Revision 0 (I 2/21/2004)
Safety Rules
SAVE THESE
TABLE
mNSTRUCTmONS
OF CONTENTS
Section
Section
I o Safety Rules ..........................
2 - Features and Controls
...................
Section
Section
Section
3 o Assembly ............................
4 o Operation
..........................
5 o Maintenance ........................
SAFETY
2-4
5
6-8
9-13
14ol6
Section 6 o Storage ..............................
Section 7 oTroubleshooting
........................
Warranty
......................................
17
18
19
EQUmPNENT
Read your
this manual
familiar
........... with
pressurecarefully
washer. and
Knowbecome
its
a_pmications, its mimitations and any hazards
invomved°
This manual contains information for a high pressure
washer that operates at a maximum pressure of 3_000 PSI
and a maximum flow rate of 2.8 gallons per minute.This
powerful, high quality system features large 10" wheels, a
pump equipped with an automatic cool down system,
chemical iniection system, nozzle extension with quid<
connect, ProiectPro TMnozzle system, safety goggles, heavy
duty 25' hose, and more.
RULES
This is the safety amert symbol it is used to
amert you to potentiam personam iniury
hazards. Obey all safety messages that follow
this symbol to avoid possibme iniury or death.
The safety alert symbol (_) is used with a signal word
(DANGER, CAUTION_WARNING),
a pictorial and/or a
safety message to alert you to hazards. DANGER
indicates
a hazard which, if not avoided, will result in death or serious
injury. WARNING
indicates a hazard which, if not
avoided, could result in death or serious iniury. CAUTION
indicates a hazard which, if not avoided, might result in
minor or moderate
iniury. CAUTION,
when used
without
the alert symbol, indicates a situation that could
result in equipment
damage. Follow safety messages to
avoid or reduce the risk of iniury or death.
Hazard
Symbols
and Meanings
Every effort has been made to ensure that information in
this manual is accurate and current. However, we reserve
the right to change, alter or otherwise
improve
product and this document
at any time without
notice.
the
prior
Toxic Fumes
Slippery Surface
Fire
Moving Parts
Electrical
Fall
Explosion
Flying Obiects
Shock
Fluid Iniection
Hot Surface
Kickback
Section 1: Safety Rules
WARNING
WARNING
WHEN
ADDING
FUEL
Turn pressure washer OFF and let it cool at least 2 minutes
before removing fuel cap.
Operate
pressure washer ONLY outdoors,
Fill fiJeI tank outdoors.
Keep exhaust gas from entering a confined area through
windows, doors, ventilation intakes or other openings.
DO NOT
operate
DO NOT
over{ill tank.AIIow
Keep fueI away from sparks,
other ignition sources.
pressure washer inside any building or
space for fuel expansion.
open
flames, pilot lights, heat, and
enclosure.
DO NOT
Use a respirator or mask whenever
vapors may be inhaled,
there
is a chance that
VHEN
light a cigarette
OPERATmNG
or smoke.
EQUmPMENT
Read all instructions with mask so you are certain the mask wilI
provide the necessary protection against inhaling harmful vapors,
WARNING
• Transport/repair
valve OFE
WHEN
STORING
iN TANK
with fuel tank EPIPTY or with fuel shutoff
FUEL
OR EQUIPMENT
WiTH
FUEL
Store away from furnaces, stoves, water heaters, clothes
dryers or other appliances that have pilot light or other
ignition source because they can ignite fuel vapors.
WARNING
Keep spray nozzle
between
8 to 24 inches
away from cleaning
SUY{ace,
Operate
this unit on a stable
surface.
The cleaning area should have adequate
slopes and drainage
reduce the possibility of a fall due to slippery surfaces.
to
Be extremely
careful if you must use the pressure
washer from
a ladder; scaffolding or any other relatively unstable location.
NEVER aim spray gun at people, animals or plants,
DO NOT allow CHILDREN to operate pressure washem
NEVER repair" high pressure hose, Replace it.
Firmly grasp spray gun with both hands when using high
pressure spray to avoid iniury if gun kicks back,
WARNING
Keep high pressure hose connected to pump and spray gun
while system is pressurized,
Squeezetrigger on spray gun to relieve trapped pressure,
every time you stop engine. Engagetrigger lock on spray gun.
WARNING
When starting engine, pull cord slow, Jy until resistance
and then pull rapidly to avoid kickback.
is felt
If engine starts and fails to continue to run or if increased
resistance
is felt during starting pull attempts,
squeeze trigger
on spray gun,
Keep water spray away from
shock may result.
electric
wiring
or fatal electric
Section 1: Safety Rules
WARNING
CAUTION
DO NOT
tamper
with governed
DO NOT operate
pressure
speed.
washer
above
rated
pressure.
CAUTION
DO NOT
Allow
touch hot surfaces.
equipment
to coo[ before
touching.
The pressure washer must be at [east 5 feet from structures
having combustible wails and/or other combustible materials.
Keep at least 3 feet of clearance on all sides of pressure
washer
for" adequate cooling, maintenance
In the State of California
a spark arrester
(Section 4442 of the California
in effective working
leave spray gun unattended
while machine is
NEVER use a spray gun which does not have a trigger
by law
trigger
PuNic Resources Code). Other
guard in place and in working
Always be certain spray gun, nozzles
correctly attached.
states may have similar Jaws. Federal laws apply on federal
lands. If you equip the muffler with a spark arrester; it must be
maintained
secure spray gun in open position.
DO NOT
running.
and servicing.
is required
DO NOT
lock or
order:
and accessories
are
orden
WARNING
DO NOT point spray gun at glass when using MAX (pin
point) nozzle,
.
DO NOT wear loose clothing, ieweiry or anything that may
be caught in the starter or" other rotating parts.
.
Tie up long hair and remove
NEVER aim spray gun at plants.
]ewelD:
WARNING
If you have questions about intended use, ask dealer or
contact Briggs & Stratton
Power Products.
NEVER operate
Always wear
vicinity
eye protection
of where
equipment
when
using this equipment
without
or in
DO NOT
is in use,
1
WARNING
provided
machine
or missing
parts, or
or covers.
any safety
pressure
device
washer
of the equipment
NEVER move
handle
housing
by-pass
Before starting
parts
units with broken
protective
on this machine.
in cold weather,
check
to be sure ice has not formed
by pulling on high pressure
all
there.
hose. Use
on unit.
Check fuel system for leaks or"signs of deterioration,
such as
chafed or" spongy hose, loose or missing damps, or damaged
tank or cap. Correct
all defects
before
operating
pressure
washerL
WHEN
ADJUSTING
PRESSURE WASHER
Disconnect
where
OR MAKING
REPAiRSTOYOUR
spark plug wire from spark plug and place wire
it cannot
contact
spark plug.
This equipment
is designed
to be used with Briggs & Stratton
Power Products authorized
parts ONLY. ff equipment
is used
with parts that DO NOT comply with minimum specificadons,
user assumes all risks and liabilities.
Features and Controls
KNOWYOUR
Read this owner's
Compare
PRESSURE WASHER
manual
the illustrations
adjustments,
Save this
and safety rules
before
operating
with your pressure washer to familiarize
manual
for future
your
pressure
washer,
yourseff with the [ocaqons of various controB
Pump equipped with
Automatic Cool Down System
ProjectPro TM
Nozzles
and
reference,
Fuel Tank
Choke Lever
Throttle Lever
Recoil Starter
(on front of engine)
Air Filter
AccessoryTray
Spray Gun
High Pressure Hose
Data Tag
Oil Fill/Dipstick
Chemical injection
High Pressure Oudet
Accessory
Tray -- Provides convenient storage for
standard and optional accessories, such as brushes, turbo
wands, etc.
Air FiTter -- Protects engine by filtering
out of intake air.
Automatic
Cool
Down
System
--
High Pressure Hose -- Connect one end to water
pump and the other end to spray gun.
High Pressure
hose.
dust and debris
through pump when water reaches 125°, 155°EVVarm
water wiN[ discharge from pump onto ground,This system
prevents internal pump damage.
Oil
Lever --
Prepares a cold engine for starting.
DataTag
(not shown) - Provides mode[ and serial
number of pressure washer. Please have these readily
available if calling for assistance.
Fuel TankFill tank with regular unleaded fuel.Always
Heaveroom for fuel expansion.
for high pressure
Fill/Dipstick
--
--Allows
you
Check and fill with oil here.
ProjectPro
TMNozzles -- Chemical injection, 0°, 15°, and
40°: for various high pressure cleaning applications.
Chemical
injection
Siphon/Filter
-- Use to siphon
detergent or other pressure washer chemicals into the low
Choke
-- Connection
Nozzle
Extension
with Quick Connect
to switch between four different nozzles.
Cycles water
pressurestream,
Outlet
Pump
-- Develops high pressure.
Recoil
Starter
-- Used for starting the engine manually.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Inchdes trigger lock.
Throttle
Lever -- Sets engine in starting mode for recoil
starter and stops a running engine.
Water
@@
inlet
-- Connection
for garden hose.
ASSENBL¥
PREPARING
WASHER
Read entire owner's manuaH before you
mNPORTANT:
PRESSURE
FOR USE
attempt to assembHeor operate your new pressure washer.
Remove
Pressure
Carton
If you have any probHems with the assembHy of your
pressure washer or if parts are missing or damaged_ caHHthe
pressure washer heHpHineat i -888-6 i i -6708_
4asher from
To prepare
o Remove the parts bag packed with pressure washer.
will
o Ske two corners at the end of carton from top to
bottom so the pane[ can be folded down fHat_then
remove aHH
pacHdng material
o RoHHpressure washer out of carton.
Carton
Contents
Items in the carton
o HaHn Unit
include:
Safety Goggles
HandHe
NozzHe Extension with Qu[cH;
3.
Pressure
Chemical
of detergent
siphoning
tube
into
Operate
container.
8 to 24 inches
away from cleaning
this unit on a stable surface_
Be extremely
l
between
careful if you must use the pressure
a ladden scaffolding
or an>, other
relatively
w,asher
unstable
from
location.
Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury if gun kicks back,
• When
inserting
the filter into a detergent
solution
route the tube so as to keep it from inadvertently
the hot mufflen
4.
Hake sure black ProjectPro
nozzle is installed.
NOTE:
Detergent
pressure
nozzles
5.
cannot
bottle,
Apply a high pressure spray to a small area and then
check the surface for damage. If no damage is found,
you can assume it is okay to continue rinsing.
6.
Start at top of area to be rinsed, working down with
same overlapping strokes as you used for cleaning.
contacting
TM cleaning detergent
be applied with the high
(Yellow, Orange
S.
or Red).
Hake sure garden hose is connected
to water inlet.
Check that high pressure hose is connected
to spray
gun and pump and start engine.
6.
Apply detergent
to a dry surface, starting at lower
portion of area to be washed and work upwar& using
Iong, even, overlapping strokes.
7.
Allow detergent
to soak in between 3-5 minutes
before washing and rinsing. Reapply as needed to
prevent surface from drying. DO NOT allow detergent
to dry on (prevents streaking).
iMPORTANT:You
must flush the chemical injection
system after each use by placing the filter into a bucket of
clean water, then run the pressure washer in low pressure
for 1o2 minutes.
Cleaning
If you
with
I.
used
clean
Detergent
the
detergent
water
before
Place chemical
clean water.
2.
Attach
3.
4.
Flush
tube,
stopping
injection
black
for
Siphoning
siphoning
cleaning
the
Tube
must
flush
it
engine.
siphon/filter
detergent
you
in a bucket
full of
nozzle.
I-2 minutes.
IMPORTANT:
Simply shutting OFF engine will not
release pressure in the system. When
the engine has
shut down, squeeze the trigger
on the spray gun to
relieve the pressure in the hose.
Automatic
Cool
(Thermal
If you
run
3°5 minutes
circulating
the
System
Down
Relief)
engine
without
water
on
your
pressing
in the
above
125°EThe
system
discharging
the warm
pump
pressure
the
can
engages
water
trigger
reach
washer
on the
for
spray
temperatures
to cool the pump
onto the ground.
by
gun,
SPECmFICATIONS
Max
Outmet
Max
Flow
Pressure
Rate
Detergent
Water
.....................
..........
2.8 gallons
Use detergent
Supply
approved
Not
.............
Weight
per minute
for pressure
................
Automatic
Coo[
Down System
Shipping
3000 psi
(gpm)
washers
to Exceed
IO0°F
Will cycle when water
reaches 125°° 155°F
...........................
95 Ibs.
have been
recove
washer
warranty
subjected
full value
does
to operator
from
maintain
the pressure
NOTE:
Should
not
properly
you have questions
wH[ need
maintain
gun and nozzle
your
about
air filter
assure
for
engine
run
engine
owner's
the
better
air fiker.A
and
exist,
the
value
with
please
for more
details.
on
the
Before
Each
Use
I.
Check
engine oillevel.
2.
Check
water
tires,
tire
Check
immediately.
Replacement hose rating MUST exceed maximum
rating of unit.
to
the
spray
the spark
_ent
Siphonin_
Examine
the
clogged.The
plug,
tube
the
filter
on the
detergent
tube
should
fit tightly
tube
for leaks
if either
keep
the
or within
or
tube
on
tears.
the
pressure
Tube
and clean
barbed
Replace
if
fitting.
the
filter
or
is damaged.
plug and clean
refer
Check
and Nozzle Extension
Gun
to your
Examine
air pressure
15 and 40 psi.
the
at
hose connection
"springs
sure it
the
trigger
for damage.
3.
Check
Ched< high pressure
in=line filter for damage.
5.
Ched< chemical
6.
Check spray gun and nozzle extension assembly for
leaks.
7.
Rinse out garden
Refer
lock
not
Check
4.
to
becomes
in the
Nozzle
into
ON
by pressing
place when
position
you
it and making
release
In-Line
Figure
17 and
clogged,
Extension
Filter
service
as follows:
the
it. Put
and test the trigger.You
be able to press the trigger.
hose and filter for damage.
hose to flush out debris.
to the spray gun and make
the trigger
back"
hose for leaks.
injection
If any of these
hose
NEVER repair high pressure hose, Replace it.
should
inlet screen
using
of cover,
WARNING
caI[
and help your
Please
marked
the
wear,
before
rephcing
spark
mixture
last longer.
inflatable
or bulging
of couplings.
replace
sure it is secure.Test
o If equipped
leaks from
the hose each time
manual.
for wear.
new
fueloair
manual
Hose
cuts, leaks, abrasions
or movement
it if the
is damaged.
must
in this
clean or replace
proper
inlet. Clean
it if screen
hose can develop
or abuse. Inspect
Examine
clean or replace
Screen
Pressure
The high pressure
that
to be made periodically
assembly
a year you should
water
or replace
_h
conditions
o All maintenance
in this manual and the engine owner's
manual should be made at least once each season.
° Once
on the
screen
is clogged
damage
items
washer,
pressure washer.
extension
the
screen
it. Check
the operator
as instructed
components
on your TroyoBik pressure
[ =888=6 [ [ =6708 for assistance.
° Some adjustments
Examine
Inlet
abuse or negligence.To
the warranty,
washer
cover
and Clean
Check
kinking,
GENERAL
HAINTENANCE
RECOHHENDATIONS
The pressure
PRESSURE
WASHER
MAINTENANCE
in:line
filter
if it
Section 5: Maintenance
H.
Detach
spray gun and nozzHe extension
pressure
hose. Detach
and remove
o:ring
from
nozzHe extension
and screen
from
PHace inoHine filter
extension.
with
Direction
eraser
4.
into
PHace o:ring
inoHine filter
care to not
into recess.
screen.
trigger
sensation
principaH
cHoKed
or restricted
etc.To
Push screen
correct
bend
screen.
Push o:ring
following
with
these
foreign
the
pump
pressure
off water
dean
the
nozzHe from
end of nozzHe extension.
3.
Remove
inoHine filter
from
other
nozzHe
Use
wire
chip to free
nozzHe
any foreign
(Figure
materiaH
H8).
flushing
water,
and start
with
each quick
Maintenance
It is not
nearest
the
inHet filter.
Refer to the
your
instruction
number
authorized
pressure
o-rings_ rubber
to
service
the
incHuded with
Kit_ part
washer
sheet
service
washer.This
provided
in the kit
unit's o-rings.
Maintenance
Pump
Oil
Change oiH every 50 hours or once yearly, whichever
occurs first.
pump
bottle of pump
the nearest
oil as follows:
H.
Drain engine oiH and fuel from pressure
washer.
2_.
Use a 8ram aHHenwrench to remove bHack pump oiH cap
between high pressure outlet and garden hose inHet
(Figure 2.0).
Oil Cap
a garden
water
BacH< flush
hose,
through
between
remove
additionaH
nozzHe extension
30 to
60 seconds.
kit
and water
here
debris.
Using
on
by operating
an O-Ring/Maintenance
incHudes repHacement
Change
end of nozzHe
tO remove
5,
gun.
NOTE:You
must purchase a premeasured
oil item number H90585GS_ by contacting
authorized
service center.
supply.
extension.
restricting
center.
Changing
is a nozzHe
materiaHs_ such as dirt_
immediately
and turn
nozzHe extension.
to spray
suppHy, turn
Test pressure
washer
connect nozzHes.
Pump
spray gun
Remove
or
water
into
pressure.The
instructions:
a smaHH paper
Reconnect
Purchase
to spray gun_ as described
2.
dogging
inoHine filter
of
snugly against
Shut off engine
Use
nozzHe extension
O-R[n_
H.
4.
and
H9H92.2.GS by contacting
pump
the probHem,
Reconnect
in
it rests fiat at bottom
by excessive
cause of excessive
7.
9.
end of nozzHe
matter.
felt whiHe squeezing
may be caused
ReinstaHH nozzHe
engine.
Maintenance
A pulsing
6.
8.
with
until
AssembHe nozzHe extension
earHier in this manual
Nozzle
threaded
does not
end of pencil
opening.TaH
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Page Count : 36
Page Layout : SinglePage
Page Mode : UseNone
Producer : Goby Monitor Application version 3, 2, 1, 4
Create Date : Tue Aug 14 19:33:43 2007
Author :
Title :
Subject :
EXIF Metadata provided by EXIF.tools