Tru Remote Welding Equipment TR8 Industrial Radio Remote Controller User Manual TRU REMOTE PATENT PENDING

Download:
Mirror Download [FCC.gov]
Document ID	3447841
Application ID	IpcCuui+mu6UDdfRIdVHYA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.59kB (257402 bits)
Date Submitted	2017-07-03 00:00:00
Date Available	2017-07-03 00:00:00
Creation Date	2017-06-16 17:46:50
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2017-06-16 17:46:52
Document Title	TRU-REMOTE PATENT PENDING
Document Creator	Acrobat PDFMaker 7.0 for Word
Document Author:	Danny

TRU-REMOTE
INDUSTRIAL WELDING EQUIPMENT LTD.
WORLDWIDE PATENTS PENDING
WIRELESS WELDING MACHINE REMOTES
OWNER’S MANUAL
MODEL TYPES: TR8
TABLE OF CONTENTS
SECTION
DESCRIPTION
1.
Transmitter specifications
2.
Receiver Specifications
3.
Scope of Supply
4.
Operation
5.
Trouble Shooting
6.
Warranty
SECTION ONE
General Specifications Models TR8
Transmitter Specifications:
1.
Structure: glass fibre
2.
Operating temperature: -30℃ to +70℃
3.
ID code: 32 bit.
4.
Hamming distance ≥ 4
5.
Weight 130g (w/o batteries)
6.
2 x AA size alkaline batteries
7.
Push button jam detector
8.
Normal power consumption – 15mA
9.
Modulation: FM
10.
Error free hamming code technology
SECTION TWO
Receiver Specifications:
1.
Structure: glass fibre
2.
Operating temperature: -30℃ to +70℃
3.
Weight: 695g (w/o cable)
4.
Size: 167mm x 154mm x 65mm
5.
Power supply 12 – 24 Volts DC
6.
Sensitivity: 105dBm
7.
Shock resistant
8.
20 amp rated output relays
SECTION THREE
Scope of Supply
Standard unit consists of the following:
1.
One transmitter unit – batteries not included
2.
One transmitter unit carrying strap
3.
One receiver box unit complete with 1.8 meter of 20 Amp rated cable
and one cable strain relief connector.
4.
One 75 mm antenna
5.
One Owner’s Manual
SECTION FOUR
Operation:
1.
Verify correct wiring procedure of receiver wiring according to
welding machine model.
2.
Install 2 fresh AA batteries in transmitter.
3.
Push start button to turn on receiver.
4.
For TR8 models; please note that for diesel or gas driven engines
using a TR8 remote transmitter it is necessary to push the GP/C push
button before trying to start the engine.
This push button
electronically engages the glow plugs or choke for a preset time
(factory set at 10 seconds). After 10 seconds press the start push
button.
5.
Once welding machine is running, push increase button to increase
amperage – push and hold to rapidly increase amperage setting.
6.
Once welding machine is running, push decrease button to decrease
amperage – push and hold to rapidly decrease amperage setting.
7.
Push stop button to shut down welding machine and radio system.
SECTION FIVE
Trouble Shooting:
♦ Do not drop the transmitter or damage to the encoder board may
occur. Should you drop your transmitter causing it to no longer
operate, contact your nearest Tru-Remote distributor.
♦ Although your Tru-Remote transmitter is designed for outdoor use,
it is not designed to be left lying unprotected in adverse weather
conditions such as rain, snow etc. Failure to store the transmitter
properly may cause corrosion problems due to moisture build-up.
♦ If the transmitter range decreases, check battery signal strength on
the display. New batteries will provide maximum signal and range.
♦ If the liquid crystal display stops functioning, check the batteries. If
batteries are fine, contact your nearest Tru-Remote distributor for
service.
♦ If transmitter indicates that the welding machine is in “run” mode
but you cannot strike on arc, check to ensure that the welding
machine is actually running. Check to ensure that the receiver unit
is turned on and receiving power. There is a green light mounted
on the receiver unit that when lit indicates that power is being fed to
the receiver unit.
♦ If receiver unit will not power up check for loose wires and make
sure that 12 volts DC is being fed to the receiver unit. If there is 12
volts DC active in the receiver but no functions operating; check for
a blown fuse. If there is 12 volts DC power and fuses are fine,
contact your nearest Tru-Remote distributor for service.
Tru-Remote INDUSTRIAL WELDING EQUIPMENT LTD.
WARRANTY
LIMITED WARRANTY – Subject to the terms and conditions below, Tru-Remote
Industrial Welding Equipment Ltd., warrants to its original retail purchaser that new TruRemote equipment sold after the effective date of this limited warranty is free of defects
in material and workmanship at the time it is shipped by Tru-Remote. THIS
WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
New Equipment:
The warranty period for complete Tru-Remote radio systems is twelve months from date
of installation or eighteen months from date of shipment, whichever is earlier.
Parts and Service:
The warranty period for parts and labor, including replacement transmitters, is ninety
days only.
Tru-Remote PRODUCTS ARE INTENDED FOR PURCHASE AND USE BY
COMMERCIAL/INDUSTRIAL USERS AND PERSONS TRAINED AND EXPERIENCED
IN THE USE AND MAINTENANCE OF WELDING EQUIPMENT.
This warranty does not include consumptive parts such as batteries, fuses, push buttons
or relays. In addition, this warranty does not cover problems caused by improper
installation, improper operation or unauthorized modifications.
In the event of a warranty claim covered by this warranty, the exclusive remedies shall
be, at Tru-Remote’s option (1) repair, or (2) replacement; or, where authorized in writing
by Tru-Remote in appropriate cases, (3) the reasonable cost of repair or replacement at
an authorized Tru-Remote service facility; or (4) payment of or credit for the purchase
price (less reasonable depreciation based on time in service) upon return of the goods at
customer’s risk and expense. Tru-Remote’s option of repair or replacement will be
F.O.B., factory at Surrey, B.C., or F.O.B. at a Tru-Remote authorized service facility as
determined by Tru-Remote.
Therefore no compensation or reimbursement for
transportation costs of any kind will be allowed.
Tru-Remote shall not be liable for any direct, indirect, special, incidental or
consequential damages.
Warranty Questions?
In Canada or U.S.A. call 1-800-883-1814 for your local Tru-Remote distributor.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
(3) Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
IMPORTANT NOTE
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
Industry Canada Notice
Operation is subject to the following two conditions: (1) this device may not cause interference and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device.
Industry Canada Caution
This device complies with Industry Canada licence‐exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'IndustrieCanadaapplicables aux appareils radio
exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Tag Email Subject               : TRU-Remote Complete Manual
Tag Author Email Display Name   : Christa McGregor
Tag Author Email                : cmcgregor@crscranesystems.com
Tag Ad Hoc Review Cycle ID      : -51776455
Company                         : Hewlett-Packard Company
Source Modified                 : D:20170616094635
Create Date                     : 2017:06:16 17:46:50+08:00
Creator Tool                    : Acrobat PDFMaker 7.0 for Word
Modify Date                     : 2017:06:16 17:46:52+08:00
Metadata Date                   : 2017:06:16 17:46:52+08:00
Document ID                     : uuid:2dbbc27e-2ab9-44e7-b8fd-2ced78225928
Instance ID                     : uuid:943f05f0-1839-4f97-9a86-a0a01d04b5cb
Version ID                      : 3
Format                          : application/pdf
Title                           : TRU-REMOTE PATENT PENDING
Creator                         : Danny
Subject                         : 
Headline                        : 
Page Count                      : 9
Page Layout                     : OneColumn
Author                          : Danny

EXIF Metadata provided by EXIF.tools