Contents
- 1. User Manual
- 2. user manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1518829 |
| Application ID | OAHes/HdKUYwpHZO4e6Rag== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 196.89kB (2461143 bits) |
| Date Submitted | 2011-08-08 00:00:00 |
| Date Available | 2011-08-08 00:00:00 |
| Creation Date | 2011-04-01 19:16:25 |
| Producing Software | Corel PDF Engine Version 1.0.0.458 |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | Users Manual |
| Document Creator | CorelDRAW 版本 12.0 |
TRULY Netpad Tablet PC N701 Series Manual Suitable for the following models: N701 N701E N701G N701EG N701T N701W N701TG N701WG Netpad N701 Series Manual Guide to safe and effective use For safe and effective use, please read carefully the following information before use. Always pay full attention during driving. Checking navigation system screen during driving may lead to serious traffic accident. In order to avoid accident, please pull over the car before operating the GPS system. The map data inside the GPS system may be different from actual road conditions, so it can only be used as a reference. Please use the system in compliance with actual traffic rules. The Company will not be held responsible for any traffic accident or other accident caused by the use of the system. When using the files in the T-Flash card, do not pull out the card so as to avoid damage to the memory card or the machine. When using the headset, please make sure the headset volume is within the acceptable range to avoid damage to your hearing. Do not let the machine and its accessories come into contact with liquid or moisture environment. Do not place the machine in the environment with too high or too low temperature. Do not place the machine aside the flame or lighted cigar or cigarette. Do not paint or varnish the machine. Do not drop or throw the machine. Do not place the machine at where the temperature may exceed 60°C such as on the car dashboard, window sill or behind the glass exposed to direct sunlight etc. Do not attempt to disassemble the machine, and do not repair the machine and accessories without authorization. The charging voltage of the machine is 5.0V. Please confirm before use. Do not use any charger not specified by the manufacturer of the machine, otherwise there will be potential danger. Use only a damp or anti-static cloth to clean the machine. Do not use dry cloth or cloth with static to wipe the machine. - 1- As the components such as LCD are breakable parts, please take good care and do not let the machine under impact or strong compression. Do not let children play with the machine or its accessories. Children are likely to cause injury to themselves or others, and may inadvertently damage the machine or its accessories. Do not freely uninstall the application in the system so as to avoid that the machine or part of the feature is not functional. The adapter of this product should not be subjected to water splashing or water droplets, and items filled with liquid such as vase should not be placed on the adapter. - 2- Content 1. Before use…………………………………………………… -41.1 The appearance and various parts…………………………………… -41.2 Before use …………………………………………………………… -51.2.1 Buttons …………………………………………………………-51.2.2 Batteries …………………………………………………………. -51.2.3 MICRO SD card …………………………………………………. -51.2.4 SIM or USIM card ………………………………………………. -51.2.5 Connecting the computers ………………………………………-6- 2. Main interface operation and setting ……………………………………… -72.1 Main interface ……………………………………………………… -82.2 Task bar and task bar icon ……………………………………………… -92.3 Setting ……………………………………………………………… -102.3.1 Wi-Fi connection ………………………………………...……… -102.3.2 3G network connection……………………………………………-122.3.3 Sound and display …………………………………………………-172.3.4 Location and security …………………………………………… -182.3.5 Application ……………………………………………………… -182.3.6 Account and synchronization ………………………………………. -192.3.7 SD card and system memory ………………………………………-202.3.8 Language and keyboard ………………………………………… -202.3.9 Date and events ……………………………………………………-202.4.0 About the mobile multimedia …………………………………… -213. Electronic Market …………………………………………………………-223.1 Login and use of the Electronic Market …………………………… -224. Browser ………………………………………………………………… -255. GPS and MAPS ………………………………………………………… -265.1 MAPS …………………………………………………………………-265.2 GPS maps …………………………………………………………… -27Appendix I: Technical Data ……………………………………………… -28Appendix II: Technical Data ……………………………………………… -29- 3- 1.Before use 1.1 The appearance and various parts 14 10 11 12 13 Figure 1.1 Appearance 1, 2: Speaker 3: Back button 4: Headphone jack 5: MENU button 6: Main interface button 7: On/Off button 8: HDMI port 9: MICRO SD card 10: Power charging port 11: USIM/SIM card port (suitable for models with 3G function) 12: USB port 13: Reset button 14: MIC - 4- 1.2Before use 1.2.1 Buttons On/Off button: in the shutdown mode, short press this button to perform power on operation; in the power on mode, short press this button to let the machine be in the sleep mode; long press this button to enter the mode switch dialogue interface, where you can select shutdown option to shut off the machine. Menu button: press this button to a pop-up menu of the program in the current interface. Back button: press this button to back to the last interface. Repeatedly press the back button can exit the program and return to the main interface. Reset button: Press the reset button to comeback the machine from abrormity, and then turn on the machine via.press the power button. Main interface button: short press this button to quickly return to the system's main interface and long press to recall the last running program for quick access. Tip: During using, if you do not know how to operate, press the "menu Button" or "back button" will definitely help 1.2.2 Batteries This machine uses 4500mAh polymer battery. During the charging the following matters should be paid attention to: 1. The charging voltage of the machine is 5.0V. Please confirm before use to avoid damage to the machine and other dangers; 2. If the battery is too low, the machine will automatically shut down. Please charge the battery. The machine can be charged in both the power on or power off mode; 3. When the machine is being charged in the power on mode, the battery icon in the task bar will display the charge mode; 4.When the charging is completed, please pull out the plug and unplug the charger from the power outlet; Charging time: it needs 4.5 hours to charge with standard charger in the shutdown mode. If charging in the power on mode, due to the simultaneous consumption of electricity, it needs more time to fully charge the battery. Using time: 3-4 hours' continuous use (the specific using time depends on the using function and machine settings). 1.2.3 MICRO SD card This machine supports 32GB or lower MICRO SD card. Because some applications require the support of SD card, it is suggested to configure with a SD card. Tip: When accessing the files in the SD card, do not pull out the card, so as to avoid damage to the SD card. To remove the SD, please firstly uninstall the SD card in the "Settings/SD card and mobile phone memory” 1.2.4 USIM or SIM card When selecting 3G network services, you need to purchase a USIM/SIM card from network providers (respectively for WCDMA or EVDO network), which contains detailed purchasing information, such as personal identification number (PIN) and optional services. - 5- To install the USIM or SIM card: 1. Please turn off the machine. 2. Insert the USIM/SIM card into the machine with the gold contact point downward. 3. Push the USIM/SIM card into the card slot until it locks into place. To remove the USIM/SIM card: 1. Please turn off the machine. 2. Gently push inward the USIM/SIM card until it is detached from th e machine. 3. Pull out the USIM/SIM card from the USIM/SIM card slot. Note: Do not insert the MICRO SD card into the USIM/SIM card slot. Figure 1.2 Presentation of USIM/SIM card insertion 1.2.5 Connecting the computers The operation of files in the SD card such as add, delete and so on can be done through USB connection. Before connecting there should be a SD card in the machine. 1. Connect the machine to the PC via USB cable. 2. When the USB connection icon appears in the task bar, press and hold the task bar and drop down to open the task bar (when the task bar is open, you can not press and hold the task bar to drop down again. The next figure is only an indication). 3. Open the USB connection message and select "Load", then you can operate the files in the SD card as the operation of U disk. And you can also copy files to the SD card. - 6- 2.Main interface operation and setting After turning on and unlocking, the machine will enter the system main interface. This section describes some of the basic operation of the main interface and machine settings, mainly including the creation and deleting of shortcuts, switch between interfaces, wallpaper replacement, task bar, the machine language environment settings, WI-FI and 3G network settings etc. 2.1 Main interface The main interface operations are shown as below figure. The main interface menu will appear after pressing the menu button on the main interface. The main interface has three pages. Press and hold the interface and drag to switch the pages, and each page can be defined of different functions according to individual needs. For example: when defining a page as game page, the effective page will contain only the shortcut to games. Task bar Shortcut Press and drop down to open the task bar Press and drag to the left and right to switch the main interface Programs list Shortcut Music Electronic Market Menu of main interface Add Wallpaper Search Notice Setting Figure 2.1 Graphical presentation of the operation of the main interface Click the program interface switch button to switch between the main interface and the program interface. The program interface shows the icons of all the installed applications. You can create a shortcut for some frequently used program in the main interface. Press an icon and do not release, the interface will automatically switch to the main interface, and then drag the icon to an appropriate location to set such icon as a shortcut of the main interface and place it in the main interface. - 7- Panda reading Gmail PicSay Photo gallery Advanced Task Manager free Google Talk AppManager Google maps Quickoffice Ringdroid Meridian Player Calendar ASTRO Dev Market Mediapiayer Spare parts Browser tools Global Note Sending message Time pad Straight flush game (high-end version) Touch screen calibration (Press and hold, the interface will automatically switch to the main interface, and then drag to the appropriate location and release.) Setting Figure 2.2 Create shortcuts in the main interface The unnecessary main interface shortcut icon can be dragged to the recycle bin to delete. The deleting of the shortcut icon does not affect the program's use. Recycle bin will be formed by the interface switch button after pressing the shortcut icon. Recycle bin is located at the button area of the Program list Drag the shortcut to the Recycle bin Music Photo gallery Electronic Market Gmail Browser Figure 2.3 To delete a shortcut - 8- Map 2.2 Task bar and task bar icon The taskbar interface displays the current system time, battery status, WI-FI status, applications, USB connectivity and other information. August 6, 2010 Click to clear the notification message Ongoing Connected USB debugging Ongoing task Choose to disable the USB debugging. Notice Task start time card is not normally removed Notification message Please uninstall the SD card and then remove it to avoid data loss Figure 2.4 Task bar interface Task bar icon and the meaning New message Data download GPS status Download completed Agent events Alarm Audio playing Data synchronizing SD card space not enough WI-FI connection Battery change indication Charging No SD card Flight mode (WI-FI off) USB connection Mute icon Warning 3G network and signal Table 1 Task bar icon and the meaning - 9- 2.3 Setting You can adjust the machine state to fit the individual's using habits through machine settings. Wi-Fi, 3G network connection, sound, brightness, machine pattern lock, system language, applications management and more can be set in the settings. Setting Wireless and network Sound and display Location and safety Applications Account and synchronization Privacy Figure 2.5 Setting interface 2.3.1 Wi-Fi connection Enter the "Settings/wireless and network" to set the Wi-Fi, and Experience the Android system's powerful networking capabilities after the network connection. Icon showing that Wi-Fi is connected Settings Turn off or turn on Wi-Fi Connected to SMIT MTV-1 Network notification Notify me when there is an open network available Notification options Network Connected The network is not encrypted White curve is the signal strength Open network The network is encrypted Encryption method is on the left side Protected by WPA2 Scan Advanced settings Re-scan the network Advanced settings for Wi-Fi Figure 2.6 Wi-Fi setup interface - 10- Wi-Fi menu Figure 2.7 Wi-Fi password connection interface Some Wi-Fi network settings are not the same as the initial settings of the machine. You can press the "menu button" in the "Wi-Fi settings interface" and then enter the advanced settings to adjust the machine to adapt to the appropriate Wi-Fi networks. Advanced settings Wi-Fi sleep mode strategy Specify the desired time to switch from the Wi-Fi to mobile phone data MAC address Set when the Wi-Fi will be in sleep mode MAC address of the machine 00.11.F6.8B.0E.AA IP settings Set whether the machine will automatically obtain IP Use static IP IP address Gateway Netmask Figure 2.8 Wi-Fi advanced settings interface - 11- 2.3.2 3G network connection Please firstly insert the 3G USIM/SIM card into the USIM/SIM card port at the underside of the machine at the power-off status. After turning on the machine, if the 3G network signal is successfully detected, the icon shown in Figure 2.9 will be displayed in the system task bar: 3G network signal is successfully received Setting Music Photo gallery Browser Map Figure 2.9 3G signal icon If the 3G network signal is not detected, the icon shown in Figure 2.10 will be displayed in the system task bar: 3G network is not detected Please turn off the machine and check whether the USIM/SIM card is inserted correctly Setting Music Photo gallery Browser Map Figure 2.10 3G signal icon is not detected Touch the "Settings" in the main menu to enter the system setting interface. Touch the "wireless and network settings" option to select the "mobile network" in the interface, and then select the "access point name.” - 12- Wireless and network settings Wi-Fi Turn on the Wi-Fi Wi-Fi settings Set and manage wireless access points Virtual private network settings Set and manage virtual private network Mobile network Setting roaming, network, APN options Figure 2.11 Wireless and network settings Mobile network settings Data roaming Connect to data service when roaming Access point name Use only 2G network Network operators Select a network operator Figure 2.12 Mobile network settings Reset to default settings New APN Figure 2.13 Set the access point name - 13- Press the system's "menu" button in the "access point settings" interface and the APN settings menu will pop up. Then select the "new APN" option. Figure 2.14 shows the access point setting mode of the China Unicom WCDMA 3G network, and Figure 2.15 shows the access point setting mode of the China Telecom EVDO 3G network. Please select the corresponding network access point settings according to the configured 3G network module of the machine. Configure the access point information in accordance with the information shown in the figure, and keep other options as the default settings. Modify the access point Users can set the name Name The name of the China Unicom WCDMA network access is 3gnet Agent (Not set) Port (Not set) Username Card for entering the username Password Card for entering the password Server Figure 2.14 WCDMA access point settings Modify the access point Users can set the name Name The name of the China Telecom EVDO network access is ctnet Agent (Not set) Port (Not set) Username Card for entering the username Password Card for entering the password Server Figure 2.15 EVDO access point settings - 14- After completion of the network access point settings, click the system's "menu" button and then click the "save" button on the screen to save the current APN settings. If you do not need the current settings, click the "abandon" button. Modify the access point Name WCDMA 3gnet Agent (Not set) Port (Not set) Username Save the current APN settings and exit the current settings page Card Figure 2.16 Save the current access point settings Abandon the current APN settings and exit the current settings page After successful settings, the just set APN access point can be seen in the APN list. Click the circular button on the right of the corresponding APN (the center of selected button is green) to initiate the connection to the 3G wireless networks. APN currently used Figure 2.17 Select the 3G network access point to be used - 15- If you need to delete the APN access point, please click the APN name in the APN list and enter the "modify the access point" setting interface and click the system's "menu" button to select the "delete APN" option. Modify the access point Name EVDO APN Ctnet Agent (Not set) Port (Not set) Username Delete the APN setting Card Password Delete APN Abandon Save Figure 2.18 Delete APN After a successful connection to the 3G network, the icon shown in Figure 2.18 will be displayed in the system task bar. 3G network has been successfully connected Setting Music Photo gallery Browser Map Figure 2.18 3G network is successfully connected - 16- 2.3.3 Sound and display In this interface you can adjust the volume and display-related items, such as mute, media volume, screen brightness, time required for entering the power saving mode when the machine is not under operation and so on. Sound and display settings Sound settings Mute mode System mute All sounds are set to mute except that of the media and the alarm clock Ring volume Set the volume of system and notification Volume regulation Media volume Set the volume of music and video System tone System tone settings Set default system tone System vibration This item is not valid System tone vibration Notification tone Set notification tone Set default notification tone Figure 2.9 Volume and display interface 1 Sound and display settings Touch feedback Vibrate when pressing soft buttons and when carrying out some UI interact SD card notification This item is not valid Set whether to open SD card insertion notification Play SD card notification sounds Display settings Direction Automatically change the display direction when rotating the mobile Phone Animation Set whether to use the gravity sensing Window animation settings Show all window animation Brightness Brightness adjustment Adjust screen brightness Screen standby Machine sleep mode settings Adjust the delay before the automatic screen lock Figure 2.10 Volume and display interface 2 - 17- 2.3.4 Location and security Open the "using wireless network", and you can view the IP address used by the machine and the location on the Google Maps. To use the GPS positioning, please make sure the "enable GPS satellites setting" is on. If do not use GPS for a long time, you can turn off this option to save power. When setting the unlock pattern password, please make sure to keep in mind the pattern to avoid that the machine can not be unlocked when there is need to use. Figure 2.12 Security and location interface 2.3.5 Application When installing some programs with unknown source, you need to set the machine to allow the installation of program with unknown source, but this may bring risk of virus to the machine, so please confirm the security of program before installation. Application settings Unknown source Allowed to install applications not provided by the Electronic Market Quick start Set shortcut to start the application Manage applications Select this option to allow the installation of program from the SD card This item is not valid Management of installed programs Manage and remove installed applications Running services Management of running programs View and control currently running services Development Development related matters Setting up the application development options Figure 2.13 Program management interface - 18- Enter the "management application", and you can view relevant information of the application, and you can also delete unwanted applications. Management of applications Click and enter the program list to carry out operation such as delete, etc. Sort list Sorting by size Filter Select the program to be displayed Figure 2.14 The list of applications 2.3.6 Account and synchronization Manage Google account and set network synchronization of Gmail, calendar and contacts of the account. Synchronizing data Account and synchronization settings Conventional synchronization settings Background data You can synchronize applications and send and receive data at any time Allow the program to be updated at any time Set whether to automatically synchronize account data Automatic synchronization Application automatically synchronize data Manage account Existing account Synchronization is turned on Add a new account Add account Figure 2.11 Account management interface - 19- 2.3.7 SD card and system memory You can view the SD card and remaining space of the built-in Flash as well as manage the SD card in this interface. Total size of SD card Remaining space of SD card Uninstall the SD card from the machine Format the SD card (need to uninstall first) Figure 2.15 T-Flash card and the storage management interface Remaining space of the built-in FLASH in the machine 2.3.8 Language and keyboard You can set language, keyboard and input method of the machine at the region and text settings. System language selection. Chinese is in the final position Keyboard selection option. You can use the Chinese input when clicking this option Input method setting Figure 2.17 Region and text settings 2.3.9 Date and events You can set the display method of date and time of the machine in this interface. You can also set whether to automatically match to the network time. - 20- Date and time settings Set whether to automatically synchronize time Automatic Using the valued provided by the network Setting the date Date setting Select time zone Time zone setting China standard time Setting the time Time setting Use 24-hour format Time display format Select the date format Date display format Figure 2.16 Set the date and time 2.4.0 About mobile multimedia You can view the machine's firmware version, system version, MAC address, machine production number and other relevant information in the "About" interface. Figure 2.18 Machine information - 21- 3. Electronic Market Market offers a large variety of software to the user for experiencing and using, which generally can be divided into two versions (paid and free) to meet the different needs of different users. Software in the Market are provided, maintained and updated by software engineers from around the world. 3. 1 Login and use of the Market Before using the Market, please make sure the date is correct and the Wi-Fi is connected successfully. When initial using the Market or using after the account unbundling, you need to log in using the Gmail account. If you do not have a Gmail account, you can apply through PC or directly click the "create" button to apply for a new Google account. Please keep in mind the account and account retrieve condition after successful application. Add Google account No Google account? Create Already has a Google account? Login Back Figure 3.1 Login interface Enter the Market main interface after the completion of login. Application: applications will be displayed according to category, and you can choose the application that you want to download according to the category; Game: games will be displayed according to category, and you can choose to download different games; Download contents: to manage the downloaded applications and applications that used to be downloaded and view the updates of the installed applications. - 22- Electronic Market Games Applications Download content Free Free Hong Kong price Free Free Free Figure 3.2 Market main interface Download content shows the installation status of the selected software. Yellow bar refers to the downloading software. The one with "installed" shown on the right refers to the installed software, and the one with "free" shown on the right refers to free software not installed. If the installed so ftware has update, it will show the "updates available" information which you can click to update the software. Program search Download content Download is undergoing Download is starting Tasks waiting for download Download is starting Download content Update available Free - 23- Program status My rating Rating Uninstall application Download times The Weather Channel will be removed from this mobile phone. You can install the product once again in your mobile phone for free Cance OK Open Uninstall Figure 3.4 Uninstalling the software If you do not want to use any software or the software can not meet demand, you can choose uninstall such software. For the final step in the uninstall process, you need to choose a reason of uninstalling the software to complete the uninstall process. Please choose the reason to provide help for the software writer to improve the software. - 24- 4. Browser Before using a browser, please make sure that the WI-FI connection is normal. Press the "menu button" in the browser main interface and the browser menu will pop up. The specific functions are shown as below. Webpage Pictures Peripheral Nformation More Address bar Create a new window New window Go into the Window Browser settings Open bookmark Refresh the page previous page management interface and history management Bookmark Window Refresh Forward More Figure 5.1 Browser menu interface You can open a new window, switch window and close the window through the "window management". The settings of browser are similar to that of PC. Press the "menu button" in the browser interface in the browser press and select the "more/settings" to enter the browser settings. In the settings interface you can set the browser home page, close page, manage password, manage privacy and manage security. You can also restore the browser to factory settings. Clear all browser data and reset all settings to default Figure 5.2 Browser settings - 25- 5. GPS and MAPS The maps in this machine include GPS maps and MAPS. GPS maps are mainly used for navigation, which has the advantage of accurately locating the machine's real-time position. Meanwhile, the MAPS is more convenient in searching the map, which can be viewed through the map or satellite. When viewing in the satellite mode, you can clearly see the geographical environment of the surrounding on the map, but MAPS's machine positioning uses a Wi-Fi IP address, therefore the location shown on the map may not match the actual location. 5.1 MAPS MAPS is a map system comes with the Android system, whose map data is downloaded through the network in real time. The data will be cleared after the closure of the map, so please make sure the Wi-Fi network is connected properly before using the MAPS. Press the menu button on the map, and you can complete the address search, route planning, layer selection and other functions. MAPS can display three layers: satellite layer, standard layer and road condition layer. The road condition layer can cover the standard layer or the satellite layer. The satellite layer is a satellite aerial view of the maps, by which you can view the geographical details of the surrounding. The map data will take a long time to update, so it may have a greater difference from the actual environment. Figure 6.1 MAPS's satellite layer - 26- The standard layer has little difference from the GPS map. After adding the road condition layer, you can view the real-time traffic conditions of major roads in order to choose a relatively smooth road. Green indicates smooth road surface Brown indicates road block or red traffic light Yellow indicates a busy road Location of the machine IP Menu Search Route Layer My Location Adding vertical and horizontal Figure 6.3 Display of the standard layer + road condition layer 5.2 GPS maps GPS map uses the global positioning system to position the location, so the positioning is more accurate and suitable for car navigation Check the navigation system screen during driving may lead to serious traffic accidents. To avoid accidents, please pull over the car before operating the GPS system. The map data inside the GPS system may be different from actual road conditions, so it can only be used as a reference. Please use the system in compliance with actual traffic rules. The Company will not be held responsible for any traffic accident or other accident caused by the use of the system. Driving in the building intensive areas and under the viaduct, and the weather change or turning off of the satellite signals and other factors may affect the receiving of GPS signals, resulting in the positioning failure or inaccurate positioning, navigation failure, system dysfunction and other phenomenon. GPS is a U.S. Government-owned global satellite positioning system. The system and the Company or its agents can not guarantee its positioning accuracy at all times. During operation, please follow the operating rules and requirements of related mobile devices, otherwise the system may not function properly or stop responding. In these cases please restart the system. See GPS manual for detailed using method. - 27- Appendix I: Technical Data Product Specifications Product name Screen Processor Operating system Program running memory Built-in memory SD card slot WiFi GPS Netpad 800*480 WVGA resolution 7 TFT touch screen ARM11 + DSP Android 2.1 256MB DDR 2-32GB(can choose) Supports standard MicroSD CARD WiFi802.11 b/g Receiving frequency: 1575.42MHz (L1 band C/A code) (suitable for N701G N701EG N701WGN 701TG models) WCDMA (suitable for N701W N701WG models) 3G network EVD O/CDM A200 0 (suitable for N701 E N701 EG mode ls) TD-SCDMA (suitable for N701T N701TG models) Batteries Power adapter Supported languages Transmission method Temperature Main frame size Weight Polymer rechargeable battery 4500mAh Input: 100-240V AC Output: DC 5V, 2A Chinese, English, German, French, Spanish, Italian USB 2.0 Operating temperature: 0-40°C Storage temperature: -10-60°C 203.5*136.5*15.5mm The non-3G module weights 430g - 28- Appendix II: Technical Data Audio and Video Specifications Category Description Audio playing Format: mp3, wav, arm, ogg Video playing Format: 3gp, mp4, avi, mpeg, wmv Audio More than 6 hours of continuous playing Video More than 4 hours of continuous playing Play time - 29- Your Natpad is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile Netpad employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted with the Netpad transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the Netpad while operating can be well below the maximum value. This is because the Netpad is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a Netpad model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model Netpad when tested for use at the body is 1.572 W/Kg While there may be differences between the SAR levels of various USB WIFI and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model Netpad with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model Netpad is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: ZM2-N701. - 30- Truly Industrial (Shanwei) Co., Ltd. Address: Industrial City, North Dongchong Rd., Shanwei, Guangdong Province, China Fax: 0660-3380759 E-mail: service.sale@truly.com.cn http://www.truly.com.hk Free advisory hotline: 400-830-1989 Headquarters: Truly International Holdings Limited Address: Building 2, Chung Shun Knitting Centre, 1-3 Wing Yip Street, Kwai Chung, New Territories, Hong Kong Tel: (852) 2487 9803 Fax: (852) 2146 5756, 2480 0018, 2480 0126 http://www.truly.com.hk Free advisory hotline: 400-830-1989
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Creation Date--Text : Producer : Corel PDF Engine Version 1.0.0.458 Mod Date--Text : Creator Tool : CorelDRAW 版本 12.0 Modify Date : 2011:06:22 09:07:04-07:00 Metadata Date : 2011:06:22 09:07:04-07:00 Format : application/pdf Title : N701纯英文版说明书V03 Document ID : uuid:009587b5-bc24-4369-abd4-e5a5599fbc5b Instance ID : uuid:be6d8249-46f6-440c-894d-d693b21e7dd1 Page Count : 32 Create Date : D:20110401191625 Creator : CorelDRAW 版本 12.0EXIF Metadata provided by EXIF.tools