Tung Keng Enterprise LK003 Console for Sporting Goods User Manual ST5iB Manual English

Tung Keng Enterprise Co. Ltd Console for Sporting Goods ST5iB Manual English

User Manual

Download: Tung Keng Enterprise LK003 Console for Sporting Goods User Manual ST5iB Manual English
Mirror Download [FCC.gov]Tung Keng Enterprise LK003 Console for Sporting Goods User Manual ST5iB Manual English
Document ID2371512
Application IDFkBmXi3sLOFA4sgiCb6zNQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize192.01kB (2400154 bits)
Date Submitted2014-08-28 00:00:00
Date Available2014-08-28 00:00:00
Creation Date2014-07-01 11:31:19
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2014-07-29 13:53:27
Document TitleST5iB_Manual_English-電子錶.pdf
Document CreatorAdobe Illustrator CS3
Document Author: PC191

ST5iB CONSOLE OPERA
RATIONS
Time
HRC & Age
Heart Rate
Training
Program
Array
Incline
Level
Calories
Muscle Display
Speed
Weight/Distance
iDevice
Connection Status
Alpha-Numeric
Display
17
ABOUT THE MUSCLE DISPLAY
When the USER changes the incline level it will display on the screen.
Level 0
Levels 1-3
Levels 4-6
Levels 7-9
Levels 10-12
Levels 13-15
SPECIFICATIONS:
ENTER: To confirm all setting values
MODE: To switch Program Mode
START: To start training
STOP : 1) In training stage, pressing stop will pause the program. 2) In pause stage, pressing
stop for "4" seconds puts the program into idle status. 3) In general, pressing stop will take
you back to the previous function
*/45"/5*/$-*/&"EKVTUT*ODMJOFUPMFWFMT
*/45"/541&&%"EKVTUT4QFFEMFWFMTUP CZNJMFT
FUNCTION:
TIME
SPEED
DISTANCE
PULSE
CALORIES
18
Displays the workout time while exercising
Displays the current speed
Displays distance while exercising
30-240 BPM
Counts calories while exercising
GETTING STARTED
Idle & Sleep
t*EMF1MVHBOEVOGPMEUIFNBDIJOF UIFCV[[FSXJMMTPVOEBOEUIFTDSFFOXJMMMJHIU
up. (Figure 1, 2).
t4MFFQ8IFOUIFNBDIJOFJTMFGUJOQBVTFGPSBDFSUBJOBNPVOUPGUJNF UIF 
computer will go back to Idle mode and enter into sleep.
t4MFFQ4UBUVT MJHIUPĂŞTDSFFO 
Note: Engineer can adjust the amount of time before entering sleep mode
in Engineer Mode II--F01.
t4FUVQ8FJHIU
1. SPEED+ or SPEED- Edit Weight, the default is 70 Kg.
Figure 1
Figure 2
START TRAINING
How to Start Training
Press START (or Quick START) button to Enter into Training directly. The Screen will
show “Ready” and count down 3 seconds.
In Training Status:
1. Press Incline Instant button or INCLINE+ or INCLINE- to adjust the Incline Level.
2. Press Speed Instant button or SPEED+ or SPEED- can adjust the Speed value.
Figure 3
Figure 4
19
How to Pause / Stop
8IFOUIFCFMUJTNPWJOH QSFTT45013&4&5UPFOUFSJOUP1BVTFTUBUVT
*O'JOJTI5BSHFU7BMVF 5JNF%JTUBODF$BMPSJFT UIF.PUPSXJMMTUPQBOETIPX
“RUN END” on the screen.
*O1BVTF4UBUVTPS36/&/% 6TFSDBO1SFTT45013&4&5CVUUPOTGPSTFDPOETUP
back to Idle Mode.
PROGRAM
1. Press ENTER to enter your weight into the Program Selection Status.
2. In Program Selection Status, User can press Mode button to switch the Program Function.
MANUAL P1, P2, P3, P4, P5, P6, RANDOM, USER, H.R.C.1-3.
3. Pressing the STOP button will bring you can back to the previous Function Page.
MANUAL
1. Press ENTER to select Manual and enter the Target Time Setup.
Press SPEED+ or SPEED- to setup target time. (Time Scale: 0:00, 20:00~99:00).
2. Press ENTER to input your target time and enter into the Target Distance Setup.
Press SPEED+ or SPEED- to setup target distance. (Distance Scale: 0.00~99.00).
3. Press ENTER to input your target distance and enter into the Target Calories Setup.
Press SPEED+ or SPEED- to setup target calories. (Calories Scale: 0~9990).
4. When you have finished your set up, press START to enter Training.
20
P1 (9 HOLE): INCLINE & SPEED
1. Press ENTER to select MANUAL and press SPEED+ or SPEED- to select P1. Press
ENTER and Press SPEED+ to setup Level (Level 1 ~ Level 10).
2. Press ENTER to get into the Target Distance Setup. Although the display will show
"Enter Distance", the distance is fixed and cannot be changed. Press SPEED+ or SPEED- to
TFUVQ%JTUBODF %JTUBODF4DBMF_,..JMF 
3. Press ENTER to input the default target distance. The Screen will show “Ready Go” and
count down 3 seconds to enter the training mode.
P2 (HILL CLIMB): INCLINE & SPEED
1. Press ENTER to select MANUAL and press SPEED+ or SPEED- to select P2. Press
ENTER and Press SPEED+ to setup the Level (Level 1 ~ Level 10).
2. Press ENTER to input the level and to enter into the Target Time Setup.
Press SPEED+ or SPEED- to setup Target Time. (Time Scale: 20:00~99:00).
3. Press ENTER to input the target time. The Screen will show “Ready Go” and count
down 3 seconds to enter the training mode.
Note: P3-P6 operation is the same as P2.
RANDOM (Random Speed)
1. Press ENTER to select MANUAL and press SPEED+ or SPEED- to select RANDOM.
Press ENTER to get into Target Time Setup. Press SPEED+ or SPEED- to setup the target
time. (Time Scale: 0:00, 20:00~99:00).
2. Press ENTER to input the target time and enter into the Target Distance Setup.
1SFTT41&&% PS41&&%UPTFMFDUUBSHFUEJTUBODF %JTUBODF4DBMF_,..JMF 
3. Press ENTER to input the target distance and enter into the Target Calories Setup.
Press SPEED+ or SPEED- to select target calories. (Calories Scale: 0~9990).
4. When you have finished your training setup, please press START to enter into Training.
USER (USER CAN EDIT SPEED & INCLINE PROFILE)
1. Press ENTER to select MANUAL and press SPEED+ or SPEED- to select USER. Press
ENTER to get into the User Program and selection status.
(1) Press SPEED+ or SPEED- to choose U1, U2, U3, U4.
(2) Press ENTER for 3 seconds, enter into edit profile status. Press SPEED+ or SPEED- to
edit Speed profile shape.
21
Press INCLINE+ or INCLINE- to Incline profile shape
Press ENTER to select the next stage.
Press ENTER for 3 seconds to finish edit.
2. Press ENTER to Select U1 and enter into Target Time Setup.
Press SPEED+ or SPEED- to setup target time. (Time Scale: 0:00, 20:00~99:00).
3. Press ENTER to input the target time and enter into the Target Distance Setup.
1SFTT41&&% PS41&&%UPTFMFDUUBSHFUEJTUBODF %JTUBODF4DBMF_,..JMF 
4. Press ENTER to input the target distance and enter into the Target Calories Setup.
Press SPEED+ or SPEED- to setup the target calories. (Calories Scale: 0~9990).
5. When you have finished the setup, please press START to enter into Training.
Note: Only one target (Time, Distance, Calories) can be setup for each U1-U4 training.
H.R.C 1-3
Press ENTER to select H.R.C 1-3.
Press SPEED+ or SPEED- to selet 60%, 75%, THR (Target Heart Rate).
Note: In HRC Program, the computer will only accept the “Wireless Heart Rate Signal”
(we suggest using a wireless heart belt). If no pulse signal is detected for 45 seconds, the
computer will stop and show “No Pulse” automatically.
1. 60%, 75%
(1). Press ENTER to select 60% (or 75%) and enter into the Target Time Setup. Press
SPEED+ or SPEED- to select the target time. (Time Scale: 0:00, 20:00~99:00).
(2). Press ENTER to input the target time and enter into the Age Setup. Press SPEED+ or
SPEED- to select User Age. (Default 30 years old).
(3). Press ENTER to input your age and enter into the Target Heart Rate Setup. Press
SPEED+ or SPEED- to adjust.
(4). Press ENTER to input the target heart rate. The screen will show “Ready Go” and
count down 3 seconds to enter into the training mode.
2. THR (Target Heart Rate)
(1). Press ENTER to select your THR and enter into the Target Time Setup. Press SPEED+
or SPEED- to select the target target time. (Time Scale: 0:00, 20:00~99:00).
(2). Press ENTER to input the target time and enter into the Target Heart Rate Setup.
Press SPEED+ or SPEED- to setup target heart rate (Default 72).
(3). Press ENTER to input your target heart rate. The screen will display “Ready Go” and
count down 3 seconds to enter Training.
22
BODY FAT MODE
Press ENTER to select BODY FAT and the treadmill will ask for the following information:
 "HF1SFTFUWBMVFJT SBOHF_ 4UFQJT QSFTTTQFFE GPSBEKVTUNFOU"GUFSVTFS
selecting the right value, press ENTER to move to the next parameter setting.
 )FJHIU1SFTFUWBMVFJTDN SBOHF_DN 4UFQJTDN QSFTTTQFFE GPS
adjustment. After selecting the right value, press ENTER to move to the next parameter
setting.
 4FYSFTFUJTNBMF QSFTTTQFFE DBODIBOHFNBMF  PSGFNBMF  "GUFSTFMFDUJOHUIF
right value, press ENTER to move to the next parameter setting.
(4) Weight - Preset value is 70 kg (150LB), range:23~130kg (50~286LB),Step is 1 kg, press
TQFFE GPSBEKVTUNFOU"GUFSTFMFDUJOHUIFSJHIUWBMVF QSFTT&/5&3
Please use both hands to hold the pulse detector for 15 seconds and after 15 seconds,
windows will show body fat value (refer to below list by your result). After the value is
EJTQMBZFE QSFTTTUPQPSNJOVUFMBUFS JUXJMMSFUVSOUPTUBSUTUFBEZXJOEPXT
PROGRAM REVIEW
MANUAL
P1 9 Hole
Hidden Area
P2 Hill Climb
Hidden Area
P3 Hill Run
Hidden Area
23
P4 Interval
Hidden Area
P5 Rolling
Hidden Area
P6 Weight Loss
Hidden Area
RANDOM
HRC 75%
USER
HRC THR
HRC 1-3
BODY FAT (BDF)
HRC 60%
24
SAFETY KEY & ERROR WARNING
Safety Key Unplug:
1. When the safety key is unplugged, the machine will stop automatically and display
“SAFETY OFF” on the Screen.
2. If the user plugs the safety key back in, the machine will re-start and enter into Idle Mode.
Error Warning:
When there is an error, the machine will stop automatically and display an “Error Message”
on the screen.
1. E1 Can not detect Speed Value.
2. E6 The Incline Data is incorrect.
3. E7 The Incline AD Value is outside the normal range.
Troubleshooting:
t&3FTUBSUNBDIJOF1MFBTFDBMMGPSTFSWJDF JG&TUJMMBQQFBST
t&3FTUBSUNBDIJOF1MFBTFDBMMGPSTFSWJDF JG&TUJMMBQQFBST
t&1SFTT4UPQ*ODMJOF   BUUIFTBNFUJNFBOETUBSUUPBEKVTUUIF"%WBMVF POUIF
screen).
25
DOWNLOADING APPS AND
PAIRING YOUR DEVICE WITH THE TREADMILL
DOWNLOADING THE SOFTWARE
Connect the iPad with App Store (iTunes), search for "Pafers", then read the APP introduction
and Download the APP with running machine functions to the iPad, for example Tread
Monitor or other applicable apps.
t The App uses bluetooth mode, so please make sure the treadmill and device you are
using has bluetooth function.
t The App contains the following functions, the user must open the 3G network or wi-fi
network:
(a) Sports management: after completing the registration, log on to your personal account,
you can record or view every movement the movement of the accumulated value
(b) Some APP need connection to Google maps.
PAIRING THE BLUETOOTH DEVICE WITH THE iPad
1. Users place the iPad on area in front of the LCD screen.
2. Enter into the iPad settings and turn Bluetooth on.
3. iPad will detect all Bluetooth devices within the scope , click on the treadmill bluetooth
device name for pairing iPad Confirmation screen display connected.
4. After paired successfully, please perform the treadmill APP in 2 minutes, but not more
than 2 minutes, or iPad with the treadmill at a distance of more than 2 meters. If so, the
Bluetooth will automatically cancel the attachment. If you see“not connected,” please
perform the above steps again.
5. Press the iPad home button, the screen will return to the desktop.
6. Start the treadmill APP you downloaded, enter the APP page. When the APP connects
with the treadmill successfully, the APP screen buttons will be unlocked. Start from APP
interface using a variety of modes to control the treadmill. APP instructions, attention
and function introduction, please browse the APP download page description or contact
1BGFSTEFBMFSGPSJOTUSVDUJPOT
7. Every time after using the APP, please press the main screen (HOME) button on the
iPad twice, close the APP
26
Android
Bluetooth Enabled Android Device
Apple Products
iPod touch (4th generation)
iPod touch (3rd generation)
iPhone 5
iPhone 4S
iPhone 4
Mini iPad
iPad 2
iPad
Bladez Fitness i.Concept Bluetooth products are compatible with Apple devices with iOS
5.1 or later. It is recommended to update iOS to latest version to obtain the best user
experience.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch, is a registered
trademark of Apple, Inc., in the United States and other countries.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory
has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been
certified by the developer to meet Apple performance standards. Apple is not responsible
for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessorywith iPod, iPhone, or iPad may affect wireless
performance. iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
CHANGING METRIC TO STANDARD MEASURMENTS
6OEFSXFJHIUTFUUJOHXJOEPXT QSFTT&/5&3GPSTFDPOETBOEFOUFS.1),1)DIBOHJOH
mode. If it is MPH, LCD windows will show"English". If it is KPH, windows will show
h.FUSJD 1SFTT TQFFE JOSFBTFEFDSFBTF DBO DIBOHF &OHMJTI.FUSJD  UIF QSFTT &/5&3 GPS
confirmation. If your operation is successful, systems will do initialization action.
27
MAINTENANCE AND CLEANING
Care has been taken to assure that your equipment has been properly adjusted and
lubricated at the factory. It is not recommended that the user attempt service on the internal
components. Instead, seek service from an authorized service center. However, you may
clean the outer surface. Use a soft cloth, dampened with warm water. Do not use aerosol
of harsh chemicals will destroy the protective coating and cause a static build-up that may
damage the some of the components.
NOTE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
◆ Reorient or relocate the receiving antenna.
◆ Increase the separation between the equipment and receiver.
◆ Connect the equipment into an outlet on a circuit different from that to
which the receiver is needed.
◆ Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the equipment.
1. To comply with FCC RF exposure compliance requirements, a separation distanc
of at least 20 cm must be maintained between the antenna of this device and all
persons.
2. This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC ID: PHGLK003
28
EXPLODED VIEW DRAWING
29
PARTS LIST
To order replacement parts: provide your customer service representative with the product model
number and the part number located on the Parts List below, along with the quantity you require.
NO#
DESCRIPTION
Frame assembly
Endcap
Power wire socket
Round head philips screw
Power switch
Circuit breaker
Round head philips self tapping screw
Extension wire (white)
Extension wire (black)
44
45
46
47
48
49
10
11
12
13
14
15
16
17
18
19
20
50
51
52
53
54
55
56
57
58
59
60
21
Extension wire (white)
Extension wire (black)
Extension wire
Sensor
6HQVRUÂż[LQJEDVH
Controller set
Philips screw
Control wire (lower)
Wire clip knob
Wire clip knob
Washer drilling philips self tapping
screw
Motor
61
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Hex screw
Spring washer
Rubber pad
Washer
Drive belt
Running board
Air-shox
Double sided tape
Philips screw
Nylon nut
Socket hex screw
Foam sticker
Running belt
Running board extension plate
Philips self tapping screw
Upper motor cover
Isolation pad
Rail
Rail shim
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
30
QTY
NO#
41
42
43
DESCRIPTION
Philips self tapping screw
Lower motor cover
Washer drilling philips self
tapping screw
Wheel
Hex screw
Nylon nut
Rear end cap (left)
Rear end cap (right)
Round head drilling philips self
tapping screw
Incline motor
Plastic washer
Cks hex screw
Front roller
Hex screw
Washer
Hex nut
Rear roller
Truss hex screw
End cap
Foot pad
QTY
14
NO#
81
82
83
DESCRIPTION
Upright left
Upright right
Shocker tube assembly
Washer drilling philips self
tapping screw
Incline base assembly
End cap
Hex screw
,QFOLQHEDVHÀH[LURQSODWHSLQ
R-pin
/RZHUIROGLQJÀH[WXEH
Iron nut
Pedal
Iron core
Spring
Inner end cap
Philips screw
Philips screw
Nylon nut
Plastic post pad
Hex screw
Upper Folding Flex Tube
Cylinder
End Cap
QTY
84
85
87
88
89
90
Guide thread
Computer console
Hand pulse set
Computer holder assembly
Hex screw
Nylon nut
10
92
93
95
97
98
99
100
102
103
104
107
Water bottle
Safety key
Hex screw
L hex wrench
Hex wrench+plus screw driver
Hex wrench+plus screw driver
Silicon
Rubber pad
Wire clip knob
Philips self tapping screw
Power wire
108
Base assembly
109
110
111
112
114
117
118
119
120
121
122
123
124
125
126
127
128
132
Wheel
Washer
Oval end cap
PVC foam grip
Foam sticker
Left decorative cover
Right decorative cover
Philips self tapping screw
Two sides suction cup
Hex screw
Motor plate
Hex screw
Washer
Spring
Spring washer
Anti-skid washer
Washer
Hex screw
16
WARRANTY
RESIDENTIAL WARRANTY
Bladez Fitness will repair or replace, free of charge, at its option, parts that are defective as
a result of material or workmanship. Lifetime replacement warranty coverage on frame
and Three (3) year on other parts. Labor warranty coverage is one (1) year. Warranty
covers the original consumer purchaser only.
THIS WARRANTY DOES NOT COVER
t Pre-delivery set-up.
t Components that require replacement due to dirt or lack of regular maintenance.
t Expendable items which become worn during normal use.
t Repairs necessary because of operator abuse or negligence or the failure to operate
BOENBJOUBJOUIFFRVJQNFOUBDDPSEJOHUPUIFJOTUSVDUJPOTDPOUBJOFEJOUIF0XOFST
Manual.
For more detailed warranty information or to register your product warranty easily
online, visit our website at: http://www.bladeziconcept.com
* Applies to defects from the manufacturer only.
FOR WARRANTY REPAIRS, PLEASE DO NOT TAKE YOUR MACHINE
BACK TO THE RETAIL STORE. CONTACT BLADEZ FITNESS FIRST.
#MBEF['JUOFTT#)/PSUI"NFSJDB$PSQPSBUJPO
20155 Ellipse
Foothill Ranch, CA 92610
Phone: 949.206.0330; Toll Free: 866.325.2339; Fax: 949.206.0013
Web: www.bladeziconcept.com
Mon - Fri 8am - 5pm PST
31
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.1-c036 46.277092, Fri Feb 23 2007 14:17:08
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2014:07:01 11:31:19+08:00
Modify Date                     : 2014:07:29 13:53:27+08:00
Metadata Date                   : 2014:07:29 13:53:27+08:00
Creator Tool                    : Adobe Illustrator CS3
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 10615 bytes, use -b option to extract), (Binary data 8196 bytes, use -b option to extract)
Thumbnail Width                 : 200
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 21389 bytes, use -b option to extract)
Document ID                     : uuid:3B792624D000E4119AC9BFB7AB8DC484
Instance ID                     : uuid:bfc53d07-2b94-44c4-867e-9907cf572293
Derived From Instance ID        : uuid:a706e142-7d34-4f21-9535-7a2a0f634106
Derived From Document ID        : xmp.did:E47F821CD5206811808393F1ACE3A832
Derived From Rendition Class    : proof:pdf
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 215.900000
Max Page Size H                 : 279.400000
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, AGaramondPro-BoldItalic, AGaramondPro-Bold, AGaramondPro-Regular, TimesNewRomanPSMT, MyriadPro-Bold, PMingLiU
Font Family                     : Arial, Adobe Garamond Pro, Adobe Garamond Pro, Adobe Garamond Pro, Times New Roman, Myriad Pro, 新細明體
Font Face                       : Regular, Bold Italic, Bold, Regular, Regular, Bold, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, TrueType
Font Version                    : Version 3.00, OTF 1.007;PS 001.000;Core 1.0.30;makeotf.lib1.4.1030, OTF 1.007;PS 001.000;Core 1.0.30;makeotf.lib1.4.1030, OTF 1.007;PS 001.000;Core 1.0.30;makeotf.lib1.4.1030, Version 3.00, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 3.21
Font Composite                  : False, False, False, False, False, False, False
Font File Name                  : ARIAL.TTF, AGaramondPro-BoldItalic.otf, AGaramondPro-Bold.otf, AGaramondPro-Regular.otf, TIMES.TTF, MyriadPro-Bold.otf, mingliu.ttc
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 預設色票群組
Swatch Groups Group Type        : 0
Doc Change Count                : 26823
Format                          : application/pdf
Creator                         : PC191
Title                           : ST5iB_Manual_English-電子錶.pdf
Page Count                      : 15
Author                          : PC191
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PHGLK003

Navigation menu