Tunstall Healthcare 6460403 Radio PIR type 64604/03 User Manual Installation guide

Download:
Mirror Download [FCC.gov]
Document ID	488512
Application ID	WJpzVtEFd/hsj8yMt0q/8g==
Document Description	Installation guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	142.65kB (1783178 bits)
Date Submitted	2004-11-16 00:00:00
Date Available	2004-11-16 00:00:00
Creation Date	2004-10-25 12:28:06
Producing Software	Acrobat 5.0 Image Conversion Plug-in for Windows
Document Lastmod	2004-10-25 12:31:57
Document Title	Installation guide
Document Creator	Acrobat 5.0 Image Conversion Plug-in for Windows

31 ZMHz Radio Passive Infrared Sensor (Supervised) Installation Guide
This guide is for use with Tunslall Radio Passive Infra Red Sensor (FIR) 64604/03
These word supplement the instructions provided by the FIR manufacturer to which reference should he made.
Confirm Functionality and Compatibility
The Radio Passive Infra Red sensor (PIR) is a passive infra red movemcnt detector uith an integral radio module.
Installation
(3) Refer to provided installation instructions for optimal mounting position for I’m detector.
(b) Note that the PIR must be mounted away from electrically conductive surfaces/ materials to ensure no impairment of radio range.
(0) Partially dismantle the PIR to access the rear pattress within which knock out holes provide for mounting
(d) Connect the provided battcry- ensure polarity is correct
(a) Program the FIR into the appropriate Personal Emergency Response System (PERS). The PERS should he placed into radio
programming mode and a PIR transmission initiatedt This is most easily donc by placing the FIR into walk test tnodc- sce FIR
instntcttons. Complete any configuration it“ necessary (eg non plug and play systems). Refer to the relevant advanced user or
programming guide.
(0 Test the installation- note the alarm interval statement in the instmctions.
!. Images
Not yet available
Label lnterpreta on
The product and packaging have a small label containtng a bar code.
This bar code (code 128) contains (reading ICE to right):
6 digits, decimal to represent the radio identity; 1 digit to represent the product type (4 for PlR): 1 digit checks-urn.
(Eye readable version is printed underneath)
Additionally on the label is the part number and issue (top right) and the week and year ormanutacture (bottom left)
On the packaging there is a larger label and bmcodc.
This bar code contains:
8 digit serial number (being week number, year. scqucntial serial), 7 digit part numher, 2 digits issue. (Eye readable
version is printed underneath)
D6408034A draft Page 1 of2
Specification
Battery life: 2 years (with typical movement detection). 9V alkaline battery provided,
Battery Monitoring: The battery status otthe PIR is communicated to the PERS Equipment. The battery is checked upon manual
activation or within the supervision cycle.
Radio Range: 120 metres free space.
Weight: 190grams.
Supervision interval: Every 4 hours a supervision transmission is made. The battery is checked at the same lime. No indication of
transmission is given. (i.e o transmissions per day)
Environment: intended operating temperature between 0 to +40 Celsius.
Frequency: 312.000MHZ.
Programming: Plug and play (automatically configuring PIR product type) on compatible 34 bit systems only. Limited automatic
configuration is provided on non-34 hit systems.
l. Approvals and Statements
Federal Communications Commission (FCC) notices
l This equipment has been tested and found to comply wilh the Iimils for a Class B digital device, pursuant to part 15 ofthc
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation This equipment generates, uses and can radiate radio frequency energy and, ifnot installcd and used in
accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee
that interference will not occur in a particular installation, If this equipment docs cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
thc intcrfcrence by one or more ofthc following measures:
- Rcoricrlt or relocate the receiving antenna.
- Increase the separation between the equipment and recctvcr.
- Conncct the equipment into an outlet on a circuit different from that lo which the receiver is connected.
- Consult the dealer or an experienced radiofrv technician (or help.
3I2 Radio PIR (Part Number 64604/03) FCC ID: G2X-6460403
This Device complies with Pm I5 ofthc FCC Rules, Operalion is subject to the following two conditions: (I) This device
may not cause harmful interference, and (2) This device must acccpl any inlcrference received, including interference [hill
may cause undcsircd operation, Wanting Changes or modifications to this unit not expressly approvcd by the party
responsible for compliance could void the user’s authority to operate lhc equipment.
Industry Canada Notice This equipment mccts thc applicaolc industry Canada Equipment Technical Specifications This is
confirmed by the registration number. The abbreviation, 1c, before the registration number signifies that registration was
performed based on a Declaration of Conformity indicating that Industry Canada technical specificalions wen: met It does
not imply that industry Canada approved the equipment.
Service
This product contains no uscr serviceable parts,
It is recommended that regular testing ofihc syslcm is canted out.
Development fiIcname
K-lSystcms and Producis\USA 312 Petipheralslphase tidesign-pindoaoxoaiagldoc
Draft Nas last save: 29/09/04 15-51
D6408034A draft Page 2 of 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2004:10:25 12:31:57+01:00
Create Date                     : 2004:10:25 12:28:06+01:00
Creator                         : Acrobat 5.0 Image Conversion Plug-in for Windows
Page Count                      : 2
Mod Date                        : 2004:10:25 12:31:57+01:00
Creation Date                   : 2004:10:25 12:28:06+01:00
Producer                        : Acrobat 5.0 Image Conversion Plug-in for Windows
Metadata Date                   : 2004:10:25 12:31:57+01:00

EXIF Metadata provided by EXIF.tools