Turning Technologies RCXR02 Response Card XR02 User Manual RCXR 02 User s Manual PRELIM
Turning Technologies, LLC Response Card XR02 RCXR 02 User s Manual PRELIM
Exhibit D Users Manual per 2 1033 b3
REGULATORY INFORMATION
FCC Statement
This product has been tested and found to comply
with Part 15 of the FCC Rules. Operation it subject
to the following conditions: it may not cause
harmful interference and must be accept
interference received, including interference that
may cause undesired operations.
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.
Canada Statement
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
This devices should not be connected to a PC with a
USB cable exceeding 3 meters in length.
Turning Technologies
ResponseCard XR
User’s Manual
RCXR-02 User’s Manual Ver. Preliminary
Overview:
The RI XR-02 Keypad is designed to be used with
the RI RF & LR Receiver(s) connected to a PC.
The keypad transmits key presses via radio
frequency to the RF receiver for accumulation by
the PC. The keypad consists of 30 data and control
keys (0-9, +/-, ., CLR, Channel, Up Arrow, Down
Arrow, Left Arrow, Right Arrow, Center
Navigation button, Left Soft Key and Right Soft
Key) and an LCD.
In Idle state, the LCD is OFF. The keypad returns
to idle state after completion and processing of a
key press.
Presentation Operation Mode:
Initially the status LCD is OFF.
Pressing a single key will cause the key to be
transmitted to the receiver. After pressing a key the
status LCD shows status.
Test Mode:
The XR-02 has a test mode which can be used to
batch user responses and answers for later
transmission.
Setup Modes:
Active at any time the keyboard is ready for input.
Set RF Channel
Press Menu and Change Channel from user menu.
The current RF channel is displayed. The requested
RF channel (1-74) can be entered. Valid keys are
‘0’ through ‘9’. Valid RF Channels are ‘000’
through ‘74’.