Turning Technologies RRLR01 ResponseCard Receiver LR User Manual 732064

Turning Technologies, LLC ResponseCard Receiver LR 732064

Exhibit D Users Manual per 2 1033 b3

Download: Turning Technologies RRLR01 ResponseCard Receiver LR User Manual 732064
Mirror Download [FCC.gov]Turning Technologies RRLR01 ResponseCard Receiver LR User Manual 732064
Document ID732064
Application IDESSGpNfSF3r6cHwziA7w8w==
Document DescriptionExhibit D Users Manual per 2 1033 b3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatMicrosoft Word - pdf
Filesize6.76kB (84509 bits)
Date Submitted2006-11-27 00:00:00
Date Available2006-11-27 00:00:00
Creation Date2006-11-27 14:33:18
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2006-11-27 14:33:18
Document TitleMicrosoft Word - 732064.DOC
Document CreatorPScript5.dll Version 5.2
Document Author: Administrator

Responsive Innovations
ResponseCard RU
User’s Manual
RCRU-01 & RRLF-01/RRRF-01 User’s Manual Ver. Preliminary
REGULATORY INFORMATION
FCC Statement
This product has been tested and found to comply
with Part 15 of the FCC Rules. Operation it subject
to the following conditions: it may not cause
harmful interference and must be accept
interference received, including interference that
may cause undesired operations.
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.
Canada Statement
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
pressed. Valid keys are ‘0’ through ‘9’.
Valid RF Channels are ‘000’ through ‘127’.
While in Set RF Channel mode pressing a
valid key will cause the status LED to
briefly flash YELLOW. When Set RF
Channel Mode exits, the status LED
indicates the result as follows:
SOLID GREEN
RF Channel successful
SOLID RED
RF Channel failed
- Set
Overview:
The RI RU Keypad is designed to be used with the
RI RF & LR Receiver(s) connected to a PC. The
keypad transmits key presses via radio frequency to
the RF receiver for accumulation by the PC. The
keypad consists of 12 data keys (0-9, Go/Login, ?)
and a single status LED.
In Idle state, the LED is OFF. The keypad returns
to idle state after completion of a key press.
- Set
Standard Operation Mode:
Initially the status LED is OFF.
Pressing a single key will cause the key to be
transmitted to the receiver. After pressing a key the
status LED shows status as follows:
Quick YELLOW Blink then OFF
Receiver is not accepting data at this time
BLINKING YELLOW
being transmitted (up to 5 seconds)
SOLID GREEN
transmit successful - ready for input
SOLID RED
transmit failed – ready for input
BLINKING GREEN
Receiver indicated correct answer
BLINKING RED
Receiver indicated incorrect answer
- key is
- key
- key
Blinking Green and Blinking Red will only occur if
the Receiver is configured to indicate a correct or
incorrect answer (CORRECT POLLING mode).
Setup Modes:
Active at any time the keyboard is ready for input.
Match Mode (Check RF connection)
Press ‘?’
In order for Match Mode to operate properly
an RF Receiver MUST also be placed into
Match Mode.
Quick YELLOW Blink then OFF Receiver is not accepting data at this time
BLINKING YELLOW
- key is
being transmitted
SOLID GREEN
- RF
receiver found, but not in Match Mode
SOLID RED
- Key
transmit failed
BLINKING GREEN
- RF
receiver in Match Mode found
BLINKING RED
- RF
receiver found, but not in Match Mode
Auto Match Mode(find RF Receiver)
Press Go/Login, while holding Go/Login,
quickly press and hold ‘?’. Release both
keys.
In order for Auto Match Mode to operate
properly an RF Receiver MUST also be
placed into Match Mode, otherwise the
keypad will always indicate that Auto Match
Mode has failed.
BLINKING YELLOW
search is in progress
SOLID GREEN
search successful – Match Mode exits
SOLID RED
search failed – Match Mode exits
Set RF Channel
Press GO/LOGIN
Set RF Channel mode is indicated by the
status LED flashing a RED then GREEN
pattern. Set RF Channel mode exits
automatically after three valid keys are
pressed, if no valid key is pressed for 5
seconds, or at any time an invalid key is

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2006:11:27 14:33:18-05:00
Modify Date                     : 2006:11:27 14:33:18-05:00
Page Count                      : 4
Creation Date                   : 2006:11:27 19:33:18Z
Mod Date                        : 2006:11:27 19:33:18Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Administrator
Metadata Date                   : 2006:11:27 19:33:18Z
Creator                         : Administrator
Title                           : Microsoft Word - 732064.DOC
EXIF Metadata provided by EXIF.tools
FCC ID Filing: R4WRRLR01

Navigation menu