Tv Ears Headphones Users Manual

Headphones to the manual bc47dc32-b2f0-46d4-acf8-91390ac1757d

2015-02-03

: Tv-Ears Tv-Ears-Headphones-Users-Manual-460724 tv-ears-headphones-users-manual-460724 tv-ears pdf

Open the PDF directly: View PDF PDF.
Page Count: 11

TV Ears Original Plus User Manual
Congratulations!
You’ve taken the rst step toward the TV Ears television experience. The TV Ears Original Plus System will help you hear
TV better at your own volume. To ensure the best TV listening experience please read this manual thoroughly.
TV Ears Customer Service
Please feel free to contact us with any questions, concerns, or problems about your TV Ears product. Here are a few
ways to contact your local TV Ears customer service:
 •Call:
  USCorporateOceTollFree:1-888-883-3277
Monday – Friday 7AM – 4PM PST
  Canada:1-800-263-4864
 •Visitwww.tvears.com
Lifetime Service Guarantee
Your new TV Ears Original Plus Wireless Headset system comes with a Lifetime Service Guarantee. The Lifetime
Service Guarantee ensures TV Ears, Inc. will provide repairs and replacements at a nominal fee (plus shipping) after the
limited warranty has expired. Refer to the limitedwarrantyfor full terms.
30-dayMoneyBackGuarantee
TV Ears, Inc. honors a 30-daymoneybackguaranteefor all TV Ears products purchased through TV Ears. If for some
reason you are not fully satised within 30-days of the purchase date, please call one of the customer service numbers
listed above. We will issue a Return Merchandise Authorization (RMA) number. All returns must have an RMA number.
SafetyInstructions
1. Read all instructions completely and heed all warnings. Install in accordance with TV Ears, Inc.’s
instructions.
2. Keep these instructions in a safe place for future reference.
3. Do not use or submerge TV Ears products near water, moisture, or other liquids.
4. Clean with a dry cloth.
5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
6. For safety purposes, do not deface the prongs on the AC adapters. If the provided plug does not
t into your outlet, purchase the correct adapter or consult an electrician for replacement of the
obsolete outlet.
7. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where the cord exits from the transmitter.
8. TV Ears recommends using a surge protector to protect your TV Ears from power surges.
9. Only use attachments and accessories specied by TV Ears, Inc. with your TV Ears system.
10. Refer all servicing to qualied service personnel. Servicing is required when the TV Ears product has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the TV Ears product, the TV Ears product has been exposed to rain or
moisture, does not operate normally, or has been dropped, cracked, or broken.
Page 1
Warnings
Warning:
To reduce the risk of re or electric shock, do not expose the TV Ears product to rain or moisture. The TV Ears product
should not be exposed to dripping or splashing liquids. Do not place objects lled with liquid such as vases on or near
the TV Ears product.
Warning:
Keep batteries out of reach of children. Discard the battery faceplate (leave batteries installed in faceplate)
appropriately and carefully. If swallowed, call:
The National Button Battery Ingestion Hotline: 202-625-3333
Warning:
The magnetic eld emitted by the TV Ears ear tip speakers is minimal. When used as indicated, TV Ears headsets should
not cause magnetic interference with pacemakers or internal debrillators. The magnetic eld strength of the speakers
is less than 1 Gauss when within1 inch (3 cm) of the pacemaker or internal debrillator. It is recommended that the
user keep the ear tips at least an inch away from any pacemaker or internal debrillator.
We have not had any customers indicate a problem using TV Ears in the presence of a pacemaker or internal
debrillator. We recommend not placing the ear tip ends of the headsets (where the speakers are) on your chest or
directly in the vicinity of a pacemaker or debrillator. If you have concerns, we recommend you contact your physician.
IncludedinBox
Original Headsets
Original Transmitter
Power Stacker Transmitter
Power Stacker Patch Cord
Faceplate with battery (attached)
AC adapter (system may come with 1 or 2)
Audio Cord
Alternate Installation Kit
Power Microphone
Headphone jack adapter
Extender Cord
Balance Tool
Diagrams
IOriginal Headset
On / O and Volume Control
Tone Control
TV Ears Tips w/ Snap Tip adapters (attached)
Faceplate w/ battery (attached)
Balance Control
IIIInstallationGuide
Original Transmitter and Power Stacker (stack
combo)
AC adapter (power supply)
Audio Cord
Power Stacker Cord
II Original Transmitter
Infrared Diodes
Charging Indicator Light
Charging Cradles
Audio Port
12V port
EXT port
1
2
3
4
5
6
7
8
9
12
13
14
15
10
11
Page 2
1 2
3
4 5
6
7
8
9 10
11
9
14
15
13
DiagramI
DiagramII
DiagramIII
Front
Front Back
Back
Back
95kHz
TV
EARS
•
95kHz
TV
EARS
•
O R I G I N A L
6
O R I G I N A L
11 10
12
Transmitter
PowerStacker
Page 3
InstallationInstructions
Your new Original Plus System should come with all necessary cords pre-connected into the transmitter and power
stacker. Do not unplug any cords. If the cords come unplugged, the following instructions include directions to
re-connect in the cords.
Beforeyoustart
The transmitter and power stacker should already be stacked. If they are not, place the transmitter on top of the power
stacker. This stacked combination will be called thestack throughout the instructions.
Step 1 | Plug in the Audio Cord
For bestresults, plug the audio cord into your television’s analog (RCA) audio out ports.
1. Plug the dual end of the audio cord (red and black male plugs) into the analog (RCA) audio out ports on the
back of the television. *
2. The single end of the audio cord should already be plugged into the port labeled ‘Audio’ on the back of the
TV Ears transmitter.
If the audio cord is not plugged into the transmitter, plug it in now.
3. The power stacker cord should already be plugged into the port labeled ‘EXT’ on the back of both the
transmitter and power stacker .
If the power stacker cord is not plugged in, plug the red end of the cord into the port labeled
‘EXT’ on the back of the transmitter. Plug the black end of the power stacker cord into the port
labeled ‘EXT’ on the back of the power stacker.
 *Ifaudiooutportsarenotavailableonthebackofyourtelevision:use the audio out ports on
your cable or satellite box.
*IfoutsidetheU.Sandaudiooutportsarenotavailableonthebackofyourtelevision: use a
SCART to RCA signal out adapter.
TouseaDVDplayerorVCRwhentheaudiocordispluggedintoacableorsatellitebox:
1. Take the dual end of the audio cord (red and black male plugs); gently pull apart the red and black
plugs.
2. Insert the red plug into the analog (RCA) audio out ports of the cable or satellite box.
14
14
TV
AUDIO OUT
DVD
SATELLITE
AUDIO OUT
AUDIO OUT
14
14
12
3. Insert the black plug into the analog (RCA) audio out
ports of the DVD player or VCR.
4. The single end of the audio cord should already be
plugged into the audio port labeled ‘Audio’ on the
back of the TV Ears transmitter. If the audio cord is not
plugged into the transmitter, plug it in now.
When installed this way, you must turn o whichever
device is not in use. Turn o the cable/satellite box when
watching a DVD or video. Turn o the DVD/VCR player
when watching TV. Function may vary depending on set
up.
AlternateInstallationKit:
This kit comes with your Original Plus System. Use this kit if audio
out ports are not available or not present.
Option 1: Power Microphone
1. Plug the power microphone into the female end of the
extender cord.
2. Plug the male end of the extender cord into the port labeled
‘Audio’ on the back of the transmitter.
3. Remove the protective cover from the Velcro on the power
microphone. Stick the power microphone to the television
speaker.
The TV volume must be on for the power microphone to
work. The TV volume cannot be muted when using the
power microphone.
14
12
9
15
11
9
Page 4
Step 2 | Place and Power the TV Ears Transmitter and Power Stacker
The transmitter and power stacker infrared diodes must be in direct line of sight with the headset so the headset
can receive the infrared signal.
1. Place the stack on a at surface 3-5 feet o the ground. Point the front of the stack towards the seating
area where the headset will be used.
2. The dual plug end of the AC adapter should already be plugged into the ports labeled ‘12V’ on the back
of both the transmitter and power stacker . If the dual end of the AC adapter is not plugged into the
transmitter and power stacker, insert one plug into each ‘12V’ port; one in the transmitter and one in the
power stacker.
1. Turn the headset volume knob to the o position.
2. Place the headset in the transmitter-charging cradle facing forward.
3. Check to see that the charging light illuminates. It will glow green if the
headset is placed in the front charging cradle of the transmitter and it will glow
red if placed in the rear-charging cradle of the transmitter. It will glow amber if
one headset is placed in each cradle.
TV Ears recommends storing the headset in the charging cradle of the transmitter
when not in use, to avoid damaging the headset. The headset cannot be over charged.
If returned to the charging cradle of the transmitter, the headset will always be easy to
nd and ready for use.
Step 3 | Charging the Headset
Each headset comes pre-charged with enough battery power for 10 minutes of use. The headset will last up to 10
hours on a full charge, depending on volume level. A fully exhausted battery will take between 8-10 hours to charge
completely. The automatic 1-hour “Quick Charge” feature will rapidly charge a partially drained battery suciently for
typical use, 2-4 hours.
Option 2: Headphone Jack Adapter
1. Plug the single end of the audio cord into the port labeled ‘Audio’ on the back of the transmitter.
2. Plug either the red or black plug of the dual end of the audio cord into the female end of the headphone jack
adapter.
3. Plug the headphone jack adapter into the headphone jack of your TV.
This method of installation often cuts volume to TV speakers.
 InstallationTips:
• Ports on the front of TVs are usually audio in ports and will not send sound to your TV Ears.
• Fixed/Variable Audio Setting: audio out ports may be marked xed or variable/xed or R & L. A xed
audio out setting will allow the television volume to work independently from the TV Ears headset. The
television volume can be on mute or at a low level while the TV Ears’ volume can be turned up.
• Consult your television manual / manufacturer to manually program the television to FIXED audio if
currently set to variable audio.
• TVEarsdoesnotworkwithdigitalaudiooutportswithouttheTVEarsDAC(digitalanalog
converter).Please use audio out ports on cable or satellite box, purchase a TV Ears DAC or contact TV Ears
customer service department for assistance with digital audio out ports.
13
14 9
6
3. Plug the AC adapter into a standard electrical outlet or surge
protector.
 Note:The stack will not operate properly if unplugged from
an electrical source and must remain plugged-in to charge
the headset and transmit the infrared signal.
12
10
1
8
7
O R I G I
Page 5
Maintenance
ReplacingEarTips:
Your headset comes with foam TV Ears Tips attached. We also oer Silicone Ear Tips. The foam ear tips must be used
with black snap tip adapters; the silicone ear tips do not use snap tip adapters. Ear tips can be purchased from
TV Ears customer service.
The TV Ears headset receives an invisible infrared signal from the stack that is connected to the television.
Be certain that the infrared diodes located on the front of the stack are in direct sight with the front of
the headset to receive the signal. The infrared signal from the stack to the headset should be clear of any
obstruction (plants, books, furniture, etc.). The infrared signal cannot pass through walls or solid objects. The
headset can only pick up the infrared signal in the same room as the stack.
Step 2 | Removing the Headset after use
Always use two hands to place and remove your headset from your ears. Using one hand may loosen or tug on the
bow arms and damage your headset.
1. Remove the headset from the charging cradle of the transmitter.
2. The BALANCE control is located on the back of the headset. The balance comes set
equal to both ears. To change the balance of volume to the right and left ears, insert
the balance control tool into the opening and turn the tool towards the ear you want
to increase the volume to.
3. The writing on the front of the headset should face away from your body. The
infrared signal is received on the front of the headset.
4. Using both hands, gently separate the bow arms and place earpieces into each ear
(similar to placing a stethoscope).
5. The VOLUME control will be located on the RIGHT side. Rotate the dial to turn ON
the headset and set the volume to your comfort level.
6. The TONE control (bass and treble) will be located on the LEFT side. Rotate the
dial to adjust the tone to your preference.
UsingtheSystem      
Step 1 | Using the Headset
2
8
1
3
6
1. Turn the headset OFF by rotating the VOLUME dial , reducing the volume until you feel or
hear a click.
2. Using both hands, gently separate the bow arms from your ears.
3. Remove the headset by lowering it under your chin.
4. Place the headset into the charging cradle of the transmitter.
1
ReplacingthefoamTVEarsTipswithnewfoamTVEarsTips:
Note:Depending on usage, TV Ears Tips will become dirty and frayed. Replace TV Ears
Tips if they are soiled or show signs of wear. Do not re-attach or reuse ear tips after they
have become detached. For safety purposes, we recommend replacing TV Ears Tips every
30-60 days.
1. Use the top portion of the TV Ears Tips package to remove the ear tip from the
headset. Place the ear tip into the triangular cutout of the package.
2. Slide the ear tip to a corner and gently pull the ear tip o. The black snap tip
adapter should remain on the headset.
3. If a white o-ring remains on the tip of the snap tip adapter, remove it before
attempting to install a new ear tip.
4. Open the package of ear tips and place it on a level surface.
5. Place the pointed end of the snap tip adapter into the center hole of the new ear
tip and push down rmly until you feel the new ear tip snap.
6. Gently pull the headset away from the tray. Repeat with other ear tip. The ear tips
should now be installed.
Page 6
ReplacingtheSiliconeEarTipswithfoamTVEarsTips:
Heed all above warnings and notes about foam TV Ears Tips and Silicone Ear Tips.
1. If you are already using silicone ear tips, remove them prior to installing the foam TV Ears Tips. They will easily
pull o the headset.
2. Install the snap tip adapters by gently twisting them onto the ends of the headset.
3. Open the package of ear tips and place it on a level surface.
4. Place the pointed end of the snap tip adapter into the center hole of the new ear tip and push down until you
feel the new ear tip snap on the snap tip adapter (see diagram above).
5. Gently pull the headset away from the tray. Repeat with other ear tip. The ear tips should now be installed.
ReplacingtheBattery:
Batteries will last between 1-2 years depending on usage. If you notice reduced sound and
range it may be time to replace the battery. Only use batteries purchased from TV Ears. Be sure
to purchase the same model battery as the headset you own.
Toreplacethebatteries,youwillneed:
• New faceplate with TV Ears batteries installed (can be purchased from TV Ears
representatives)
• TV Ears headset
• Small #1 Phillips head screwdriver
ReplacingthefoamTVEarTipswiththeSiliconeEarTips:
Note:Depending on usage, silicone ear tips will become discolored and dirty with use. For
cleanliness wash the silicone ear tips with mild soap and warm water every 30 days. We
recommend replacing silicone ear tips every 6 months or as needed.
1. If you have the foam TV Ears Tips installed on your headset and are replacing them
with the silicone ear tips, remove the black snap tip adapters. To remove the snap tip
adapters, you will need something with a at edge such as a butter knife or a spoon.
2. Place your at object in the gap between the snap tip adapter and the headset. Gently
force the snap tip adapter o the headset.
3. Once the foam ear tips and snap tip adapters are removed from the headset, place
each silicone ear tip directly onto the tip of the headset where the snap tip adapter
was initially located. The ear tip should now be installed.
4
4
ReplacementInstructions:
If you are uncomfortable or have trouble replacing the battery yourself, contact TV Ears customer
service.
1. Turn the headset OFF.
2. Place the headset on a level surface, front side down.
3. Using the small #1 Phillips head screwdriver, remove the two screws on the back of the headset next to
each bow arm.
4. Turn the headset over and remove the faceplate with the TV Ears logo.
5. Place the new faceplate with batteries on the headset and turn over.
6. Using the same screwdriver gently put the screws in place and attach the new faceplate.
7. Place the headset on the transmitter-charging cradle and allow your TV Ears to charge for the full 8-10
hours.
 Note:The supplied rechargeable batteries can be recycled. In order to protect the environment, only dispose
of exhausted rechargeable batteries at a recycling facility. Do not dispose of batteries in trash.
Page 7
Repairs
Before sending in your TV Ears products for repair, please call our customer service representatives for troubleshooting
assistance. If we are unable to resolve the problem or if the product needs to be repaired, a Return Merchandise
Authorization (RMA) number will be issued. RMA numbers allow TV Ears to keep track of your product and return it to
you quickly. All returned items must have an RMA number.
ObtainaRMAnumberbycallingTVEarsCustomerService:
• USCorporateOceTollFree:1-888-883-3277
Monday - Friday 7:00AM - 4:00PM PST
• Canada:1-800-263-4864
AdditionalAccessories&ReplacementParts
Additional accessories and replacement parts can be purchased to extend your TV Ears system.
AdditionalHeadset:The transmitter is designed to hold and charge two headsets at a time. The transmitter can
transmit to more than 2 headsets at one time. Additional headsets can be used when more than one household
member wants to use TV Ears. Be sure to purchase the same model headset as the system you own.
SeatSideCharger:This charger keeps your headset charged right next to your seating area. The charger does not
transmit an infrared signal.
Foam TV Ears Tips :Pack of 10 replacement ear tips. Replace TV Ears Tips if they are soiled or show signs of wear.
Discard ear tips after they are detached; do not attempt to re-attach. For safety purposes, we recommend changing TV
Ears Tips every 30-60 days.
SiliconeEarTips:Sold as a pair or in a pack of 10 individual ear tips. For cleanliness wash the silicone ear tips with
mild soap and warm water every 30 days. We recommend replacing silicone ear tips every 6 months or as needed.
TVEarsReplacementBattery:TV Ears batteries are designed to last 1-2 years depending on usage. Only use
batteries purchased from TV Ears. Be sure to purchase the same model battery as the headset you own.
DAC(digitalanalogeconverter):This converter allows you to connect your TV Ears transmitter to a digital audio out
port when analog audio out ports are not available.
Itemscanbepurchasedonline,bytelephone,orpurchasedbyvisitinganAuthorizedTVEarsdealer.
• Online:www.tvears.com
• CallCustomerService:
• US Corporate Oce Toll Free: 1-888-883-3277
Monday - Friday 7:00AM - 4:00PM PST
• VisitalocalAuthorizedTVEarsDealer:
To nd a TV Ears dealer near you, go to the TV Ears website at www.tvears.com. Please call the dealer
to conrm the desired item is in stock.
FrequentlyAskedQuestions(FAQ’s)
1. HowdoTVEarswork?
TV Ears has infrared lights on the front of the stack, which sends an infrared signal to the receiver
in the front of the headset.
2. Whyisthesoundsoclear?
TV Ears Voice Clarifying Circuitry takes the sound of the television and enhances the speech
frequencies above the background noise, so the dialog is more clear.
3. WhydomyTVEarsmutewhenImutetheTV?
Fixed audio out will allow the television volume and TV Ears volume to work independently from one
3
4
Page 8
another. Some televisions have to be manually switched from the “Variable” audio setting to the “Fixed”
audio setting by using your TV menu. Not all TVs have the ability to switch from a variable to a xed audio
out (consult your television manual or manufacturer). When the TV is set to a “Variable” audio out setting,
the volume of the TV Ears headset will be the same volume as the TV.
4. WhydoIhearatelevisionstationwhenI’mwatchingaDVD/video?
When the audio cord is plugged into the analog (RCA) audio out port of a cable or satellite box AND
an analog (RCA) audio out port of a DVD player or VCR, you must turn o whichever device is not in
use. Turn o the cable/satellite box when watching a DVD or video. Turn o the DVD/VCR player when
watching TV.
5. HowdoIchargetheheadset?
Turn the headset o and gently place into the charging cradle of the transmitter. Be sure the charging
light on the front of the transmitter illuminates. See Step 3 of Installation.
6. HowdoIknowtheheadsetischarging?
The charging light will be green when the headset is placed in the front charging cradle of the
transmitter and red if the headset is placed in the rear-charging cradle of the transmitter. If there are two
headsets charging at the same time, the light will appear amber.
7. Willthelightschangecolorsoncetheheadsetisfullycharged?
No, the charging light will remain a constant color as long as a headset is placed in the charging cradle.
We recommend keeping the headset in the charging cradle when not in use, for safekeeping.
8. Whyisthecharginglighto?
A headset must be in the charging cradle of the transmitter in order for the charging light to illuminate.
Once the headset is removed from the transmitter, the charging light will no longer be illuminated. If
the charging light does not illuminate when the headset is in either charging cradle, pick up the headset
and replace it in the charging cradle (it should rock into place). Ensure the transmitter is receiving power.
Check that the charging posts in the cradle are positioned straight up.
9. CanIoverchargetheheadset/battery?
No, the battery will not over charge if left in the charging cradle of the transmitter. We recommend
storing the headset in the charging cradle of the transmitter for safekeeping and to ensure that the
headset is always charged and ready for use.
10.Whatisthelifetimeofthebatteries?
The rechargeable battery is designed to last between 1-2 years depending on usage.
11.HowdoIgetanewbatteryoreartips?
TV Ears Replacement batteries and TV Ears Tips are sold through TV Ears representatives.
• Online:www.tvears.com
• CallCustomerService:
• USCorporateOceTollFree:1-888-883-3277
Monday – Friday 7AM – 4PM PST
• VisitalocalAuthorizedTVEarsDealer:
To nd a TV Ears dealer near you, go to the TV Ears website at www.tvears.com. Please call the
dealer to conrm the desired item is in stock.
12.WillTVEarsworkinmovietheatersandplayhouses?
Yes, the Original Plus TV Ears systems operate at 95kHz, which is compatible with many movies and play
houses. TV Ears does not guarantee that its products will work in all public places. Check with individual
places to verify system compatibility.
13.WhyismyOriginal Plussystemhookedupbutstillnotworking?
Make sure that all the cords are plugged in completely. Check that the red plug of the power stacker cord
is plugged into the transmitter and the black plug is plugged into the power stacker.
14.Whatdoes95kHzmean?
95kHz is the frequency of the infrared signal that is sent by the transmitter to the headset. Infrared
signals are invisible light signals and are not disturbed by electrical storms.
For additional technical questions, consult our troubleshooting guide on the next page.
Page 9
If you have further questions please call one of the customer service numbers or visit our website.
TroubleshootingGuide
Problem: ChecktheFollowing:
Youhearstaticorinterference. • The audio cord is plugged into an analog (RCA)
audio OUT port on the TV, cable box, or satellite
box.
• The audio cord is NOT plugged into a digital
audio out port.
• The transmitter is plugged into a working
power outlet.
• The audio cord is plugged into the audio port of
the transmitter.
• The audio cord is plugged into the ports on the
TV and transmitter completely.
• The infrared lights of the transmitter are facing
the headset and are illuminated.
• The transmitter is 3-5 feet o the ground.
• Battery may need replacement if older than 1-2
years, depending on usage.
• TV Ears has more than one model. Be sure that
the headset model matches the transmitter
model. For example, you must use a Original
Plus headset with a Original Plus transmitter.
• Cover all large windows.
The lights on the front of transmitter do not light
up(infrareddiodesarediculttoseeinday
light).
• Cup your hand over the lights and see if 5
infrared lights are glowing red.
• Check that the AC power adapter is completely
plugged into the power outlet and 12V port on
back of the transmitter.
Thecharginglightdoesnotcomeonwhen
headsetisinthecradle.
Note: The light will be green if the headset is in the
front charging cradle and red if the headset is in the
back charging cradle. If there are two headsets in
the charging cradles, the light will be amber.
• Remove and replace headset to realign in the
charging cradle.
• Use your ngertips to gently rock the headset
right to left, making sure the headset is sitting
properly in the charging cradle.
• Check that the AC power adapter is completely
plugged into the power outlet and 12V port on
back of the transmitter.
TheTVvolumedoesnotworkindependently
fromTVEarsvolume.
• The television is set on xed audio television
settings.
See Question 3 of FAQs.
Youhearatelevisionstationwhenyouwatcha
DVDorvideo.
• Turn the cable or satellite box o when you
watch a DVD or video.
See Question 4 of FAQs.
Note:This is only if audio cord is plugged into
audio out port of a cable or satellite and DVD or VCR
player.
YouhaveaBlu-Rayplayer. • Hook your Blu-Ray player up the same way you
would a DVD or VCR.
See Step 1 of Installation Instructions.
YouhaveaDigitalConverterBoxorsimilar. • Hook your Digital Converter Box or similar up
the same way you would a cable or satellite box.
See Step 1 of Installation Instructions. Page 10
Specications
System
Modulation Infrared, Mono
Carrier frequencies 95 kHz
Range 2000 sq. ft (185.5 m2)
Audiofrequencyresponse 80-18,000 Hz
THD < 1%
SignaltoNoiseRatio 120 dB
Headset
MaxSPL 120 dB
PowerSupply NiMH (Nickel Metal Hydride) rechargeable
Operating Time up to 10 hours
Weight 1.6 oz (45g)
Height 7.75 in (19.7 cm)
Transmitter
Audio/Microphoneconnection Mini headphone/RCA cable/ Microphone
PowerSupply DC Power Supply 12v, 200mA
Weight 3 oz (85g)
Dimensions(HxWxD) 1.4” x 1.12” x 3.4” (3.6cm x 2.8cm x 8.6cm)
Manufacturer Declaration
LimitedWarranty–1Yearfromdateofpurchase
For a period of 1 Year from the date of purchase, TV Ears warranties this product against defects in material and workmanship.
The TV Ears headset, transmitter, and all parts (excluding the disposable TV Ears Tips) are under warranty and will be replaced or
repaired at no charge to the owner. The proof of purchase (POP) is required at the time of return.
Repairs or alterations performed by non-authorized TV Ears representatives will void the warranty and may damage the
equipment.
This warranty is provided at the discretion of TV Ears, Inc. and does not cover cosmetic damage or damage due to acts of nature,
accident, misuse, abuse, negligence, commercial use, or modication of or to any part of the product.
Returns&Repairs
TV Ears provides repair service for the life of the product. A nominal fee may be applied. Proof of purchase is required for claims
within the warranty period.
TV Ears Declaration
Allcontent,marks,andbrandlogosarepropertyofTV•EARS®Inc.TV•EARS®Inc.reservestherighttochangeproductcontentand
product specications without notice.
CEDeclarationofConformity
TV Ears is in compliance with the essential safety requirements and other relevant provisions of Standard IEC
60065:2001 + Ammd 1:2005 / EN 60065:2002 and Directive 2004/108/EC; 2006/95/EC, 89/336/EEC, 92/31/ EC, 93/68/
EEC. Before putting the device into operation, please observe the respective country specic regulations.
RechargeableBatteries
The supplied rechargeable batteries can be recycled. In order to protect the environment, only dispose of exhausted
rechargeable batteries at a proper recycling facility. Do not dispose of batteries in trash.
WEEE Declaration
TV Ears products are developed and manufactured with high-quality materials and components that can be
recycled and/or reused. This symbol indicates that electrical and electronic equipment must be disposed of
separately from normal waste at the end of its operational lifetime. Please dispose of this product by bringing it to
your local collection point or recycling center for such equipment. This will help protect the environment.
Page 11

Navigation menu