User Manual
EN-1
EN-2
Table of Contents
BEFORE YOU START ...................................................................................... 4
PACKAGE CONTENTS ..................................................................................... 4
PRODUCT OVERVIEW .................................................................................... 5
Front View ............................................................................................................. 5
Back View .............................................................................................................. 6
Bottom View .......................................................................................................... 7
Left View ............................................................................................................... 7
Right View ............................................................................................................. 8
STATUS INDICATORS ..................................................................................... 8
GETTING STARTED .................................................................. 9
INSTALLING THE BATTERY ............................................................................... 9
Charging the Battery ............................................................................................... 9
When to replace the Battery Pack ........................................................................... 10
Removing the Battery ........................................................................................... 10
CONNECTING THE POWER ............................................................................. 11
Connecting the AC Adapter .................................................................................... 11
Using Battery Power .............................................................................................. 11
STARTING YOUR TABLET PC .......................................................................... 12
Turning On Your Device ......................................................................................... 12
Turning Off Your Device ......................................................................................... 12
OPERATING YOUR TABLET PC .................................................... 13
SWITCHING THE SCREEN PANEL (WINDOWS 8 ONLY) ............................................. 13
Start screen ......................................................................................................... 13
Desktop ............................................................................................................... 14
Apps view ............................................................................................................ 16
USING THE QUICK MENU.............................................................................. 17
Quick Menu Overview ............................................................................................ 17
Configuring the SETUP Menu Settings ..................................................................... 20
USING THE CAMERA.................................................................................... 25
Built-in Camera Application (Windows 8 only) .......................................................... 25
Durabook Camera Scan Application (Windows 7 only) ............................................... 26
MAKING CONNECTIONS ........................................................ 30
INSTALLING THE MEMORY CARD...................................................................... 30
INSTALLING THE SIM CARD .......................................................................... 31
CONNECTING THE MICROPHONE/HEADSET ................................................................. 31
CONNECTING USB DEVICES.......................................................................... 32
CONNECTING TO WIRELESS CONNECTIONS ......................................................... 33
EN-3
USING THE BIOS SETUP UTILITY .......................................... 37
BIOS SETUP MENU.................................................................................... 37
MAIN MENU ............................................................................................. 39
ADVANCED MENU ...................................................................................... 40
BOOT MENU............................................................................................. 41
SECURITY MENU........................................................................................ 42
SAVE &EXIT MENU .................................................................................... 43
SPECIFICATIONS .................................................................. 44
APPENDIX ............................................................................. 49
COPYRIGHT.............................................................................................. 49
REGULATORY STATEMENT.............................................................................. 49
Federal Communications Commission Statement ...................................................... 49
Declaration of Conformity ...................................................................................... 49
RF exposure warning ............................................................................................. 50
Canada, Industry Canada (IC) Notices ..................................................................... 50
Battery Disposal ................................................................................................... 51
CLASS 1 LASER PRODUCT ..................................................................................... 51
SAFETY INSTRUCTIONS ................................................................................ 53
Before You Start
EN-4
Before You Start
Congratulations on your purchase of this tablet PC.
This rugged tablet PC is portable and provides users with maximum mobile
computing experience in a wide range of working environments. Before you
begin using your tablet PC, read this chapter to familiarize yourself with the main
components installed in the system.
Package Contents
If any of following items is damaged, please contact your retailer.
Tablet PC AC adapter Power cord
Stylus Pen Hand strap X-strap
NOTE
•The pictures are for reference only, actual items may slightly differ.
Before You Start
EN-5
Product Overview
Front View
No. Item Description
1 Program button Tap to enter the chosen program. (user definition)
2 Front camera Use for video conference.
3 Ambient light sensor Use to detect the current level of visible light in the
surrounding environment.
4 Microphone Record the surrounding sound.
5 Function button The button functionality can be assigned via Quick
Menu.
•Scanner button: Press to trigger the Barcode
scan function if the barcode scanner is enabled.
•Camera button: Press to take a picture.
6 Home key Tap to return to the Start screen (Windows 8 only).
Before You Start
EN-6
Back View
No. Item Description
1 Barcode scanner Scan barcodes.
2 Camera LED flash Provide additional lighting when taking pictures
under low light environment.
3 Rear camera Use to take pictures.
4 Speaker Emit sound.
5 Battery compartment Contain the battery.
6 Battery latch release
button
Press and hold the button to slide the battery
latch to the unlock position.
4
Speaker
Emit sound.
Before You Start
EN-7
Bottom View
No. Item Description
1Audio Combo jack Connect a headphone or an external speakers or
microphone.
2 USB 3.0 ports (x2) Connect USB 3.0 peripheral devices.
3 Memory card slot Use to insert memory cards to transfer pictures,
music, and data between your Tablet PC and flash
compatible devices. The card reader supports SD
(Secure Digital), SDXC, SDHC, Mini-SD (with
adapter), Micro-SD (with adapter).
4 SIM card slot Use to insert a SIM card for WWAN, Gobi 3000, or
LTE module connection.
Left View
No. Item Description
1Power button Press to turn your tablet PC on or off.
2 Volume buttons Press to adjust the volume level.
3 Kensington lock slot Connect a Kensington-compatible tablet PC
security lock.
Before You Start
EN-8
Right View
No. Item Description
1Docking connector Connect the tablet PC to a docking station.
2 DC-in jack Connect the power adapter.
Status Indicators
The status indicators in the upper side of the tablet PC light up when a particular
function of the tablet PC is active.
Icon Item Description
Power The LED always lights on (green) when the system is
running. When the system is in sleep mode, the LED
blinks.
RF Indicate the status of RF (WLAN, WWAN, or Bluetooth)
communication. The LED always lights on (blue) when
the function is enabled.
Battery Indicate the battery status:
•Green: when battery is fully charged (95% or above)
•Orange: when battery is charging
•Flashing orange: charging error
•Red: when battery capacity is lower than 10%
•Off: when discharged
Getting Started
EN-9
Getting Started
This chapter will help you get started using the device.
Installing the Battery
To install the battery, follow the steps below:
1. Align and insert the battery to the
battery compartment.
2. Push completely until the battery locks
into place.
3. Slide the battery latch to the lock
position to secure the battery.
Charging the Battery
The Lithium-ion battery is not fully-charged upon purchase.
To charge the battery, follow the steps below:
1. Install the battery to your tablet PC. See procedures above.
2. Connect the AC adapter to the DC-in jack of your tablet PC.
3. Connect the AC adapter to the power cord.
4. Plug the power cord to an electrical outlet.
Getting Started
EN-10
When to replace the Battery Pack
The battery performance gradually decreases over time and usage. We recommend
you to replace your battery pack after 18 to 24 months of usage.
Removing the Battery
To remove the battery, follow the steps below:
1. Press and hold the battery latch release
button to slide the battery latch to the
unlock position.
2. Remove the battery out of the battery
compartment.
Getting Started
EN-11
Connecting the Power
Your tablet PC can be powered up using the AC adapter or the Lithium-ion battery.
Connecting the AC Adapter
The AC adapter powers up your tablet PC and charges the battery.
1. Connect the AC adapter to the DC-in jack of your tablet PC.
2. Connect the AC adapter to the power cord.
3. Plug the power cord to an electrical outlet.
Using Battery Power
1. Install a charged battery in the battery compartment.
2. Remove the AC adapter (if plugged). Your tablet PC will automatically use the
battery power.
NOTE
•If your tablet PC is connected to an electrical outlet and the battery is installed,
your tablet PC uses power from the electrical outlet.
Getting Started
EN-12
Starting Your Tablet PC
Turning On Your Device
Press the button until the Power LED lights up.
Turning Off Your Device
It is important to properly shut down your tablet PC to avoid the loss of unsaved
data. To shut down your tablet PC, do the following:
On Windows 8
1. On the Start screen, swipe in from the
right edge of the screen, then tap
Settings.
2. Tap Power > Shut down.
On Windows 7
Click Start ( ) > Shut down.
Wait for your tablet PC to turn off power
completely before removing the power source (if
necessary).
Operating Your Tablet PC
EN-13
Operating Your Tablet PC
This chapter will guide you on how to use your Tablet PC.
Switching the Screen Panel
(Windows 8 only)
On Windows 8, there are three major user interfaces (UI) that you need be
familiar with:
•Start Screen •Desktop •Apps View
Start screen
The Start screen is where you can quick access to your favorite applications,
people, website, and etc.
•Tap the desired app icon to launch the application.
•Swipe your finger to left or right to switch panels.
•Swipe in from the right edge of the screen to access the Start screen task bar
and select the desired option.
Operating Your Tablet PC
EN-14
Desktop
The desktop view is similar as other Windows operating system. You can
customize the desktop wallpaper and pin your favorite application on the task bar.
To switch to Desktop view, tap Desktop ( ) or swipe in from the right edge of
the screen, then tap Start ( ).
Operating Your Tablet PC
EN-15
To switch to Start screen, do the following: swipe in from the right edge of the
screen, then tap Start ( ).
NOTE
•You can also directly switch to Start screen by tapping on the task bar.
Operating Your Tablet PC
EN-16
Apps view
In Apps view, you can open an application, pin the desired application to Start or
the Desktop task bar.
To switch to Apps view, do one of the following:
•slide up from the middle of the Start
screen.
•click the arrow icon ( ) on the left
corner of the Start screen.
NOTE
•For more information on Windows 8
basic operations, please visit
http://windows.microsoft.com/en-
us/windows-8/getting-around-tutorial.
Operating Your Tablet PC
EN-17
Using the Quick Menu
To enter the Quick menu:
•On Windows 8: In Apps view, tap Quick Menu ( ).
•On Windows 7: Tap the arrow on the task bar to display
hidden icons. Then tap the Quick Menu icon ( ).
Quick Menu Overview
Windows 8 Windows 7
Icon Item Description
Airplane
mode
Tap the icon to enable/disable airplane mode.
NOTE
•When the Airplane mode is enabled, the wireless
network (WLAN and WWAN), Bluetooth, and GPS will
be automatically disabled.
WLAN Tap the icon to enable/disable the Wi-Fi (WLAN) function.
WWAN/GPS Tap the icon to enable/disable the WWAN/GPS function.
WWAN Tap the icon to enable/disable the WWAN function.
Tap the icon to enable/d
isable the WWAN/GPS function.
Tap the icon to enable/disable the WWAN function.
In Apps view, tap
Quick Menu
Operating Your Tablet PC
EN-18
Icon Item Description
Bluetooth Tap the icon to enable/disable the Bluetooth function.
GPS Tap the icon to enable/disable the GPS function.
Auto-rotate Tap the icon to enable/disable the Auto-Rotate screen
function.
Setup Tap the respective tab to set hotkey, light sensor, external
GPS antenna, and external WWAN antenna settings.
For details, refer to “Configuring the SETUP Menu
Settings”.
Information Tap the icon to view the battery charge cycle, Bios
version, EC version, and Quick Menu version.
Keyboard Tap the icon to display/hide the on-screen keyboard.
Tap the icon to enable
/disable the GPS function.
Tap the icon to display/hide the on-screen keyboard.
Operating Your Tablet PC
EN-19
Icon Item Description
Mobility
center
Tap the icon to adjust brightness, screen orientation,
volume, external display, battery status, sync, wireless
network, and presentation settings.
Barcode Tap the icon to trigger the Barcode Scanner function.
External
Devices Tap the icon to enable Auto switch to the external
WWAN/GPS antenna affixed on the vehicle dock:
•If users set “Dock with external WWAN antenna” in
quick menu, the device will be auto switched to
external WWAN antenna when docking.
•If users set “Dock without external WWAN antenna” in
quick menu, the device will NOT be auto switched to
external WWAN antenna when docking.
•If users set “Dock with external GPS antenna” in quick
menu, the device will be auto switched to external
GPS antenna when docking.
•If users set “Dock without external GPS antenna” in
quick menu, the device will NOT be auto switched to
external GPS antenna when docking.
NOTE
•If the icon is gray (i.e. ), this indicates the current function is disabled.
Operating Your Tablet PC
EN-20
Configuring the SETUP Menu Settings
In Quick Menu, you can set the following settings via Setup menu:
a
d
bc
a. Programmable Button
b. External GPS Antenna
c. Light Sensor
d. External WWAN Antenna
Operating Your Tablet PC
EN-21
Configuring Hotkey
Tap th e Programmable Button tab to configure the Function or Program
button.
•If the device is not installed with a barcode scanner, the Function button can
be set as the shutter button when using the Camera.
•To assign an application to the Program button, do the following:
I. Tap the folder icon ( ) to set up an application for the Program button.
II. Select the desired application and tap Open.
Operating Your Tablet PC
EN-22
Configuring External WWAN Antenna Switching Mode
Tap th e External WWAN Antenna tab to enable/disable the device to
automatically switch to the external WWAN antenna when it is affixed on a
docking station.
•Dock with external WWAN antenna: The device automatically switches to
the external WWAN antenna when docking.
•Dock without external WWAN antenna: The device will disable the auto
switch function to the external WWAN antenna when docking.
Operating Your Tablet PC
EN-23
Configuring Light Sensor Settings
Tap th e Light Sensor tab to enable/disable the automatic light sensor function,
specify and adjust the brightness level.
Current ambient
brightness reading
Set the range of illumination settings.
Tap to restore the
default settings.
Current preset
brightness level
To setup the light sensor settings, do the following:
•To customize the illumination range according to the ambient lighting, enter the
desired value in the first and second data box.
As an example in the above illustration:
- Outdoor (5000 ~ 500 lux)
- Indoor (500 ~ 50 lux)
- Low Light (50 ~ 0 lux).
•To adjust the brightness level according to the ambient light, tap or to
adjust the setting (0~10).
•To save all preset settings, tap Apply.
•To enable the automatic light sensor function, tap the Enable Auto Light
Sensor checkbox.
The system will automatically adjust the LCD brightness according to the
preset settings.
Operating Your Tablet PC
EN-24
Configuring External GPS Antenna Switching Mode
Tap th e External GPS Antenna tab to enable/disable the device to automatically
switch to the external GPS antenna when it is affixed on a docking station.
•Dock with external GPS antenna: The device automatically switches to the
external GPS antenna when docking.
•Dock without external GPS antenna: The device will disable the auto switch
function to the external GPS antenna when docking.
Operating Your Tablet PC
EN-25
Using the Camera
Built-in Camera Application (Windows 8 only)
1. On Start screen, tap .
2. Compose your image.
3. Tap or touch the screen to capture the photo.
To record a video, tap to start recording. Then tap to stop recording.
Operating Your Tablet PC
EN-26
Durabook Camera Scan Application (Windows 7
only)
This tablet PC supports Durabook Camera Scan application that enables users to
take photos using the device camera.
Launch the application
There are two ways to launch the application:
•Double-click “DuraBook Camera Scan” on desktop.
•Tap Start > All Programs > DuraBook.
Take Photos
Press the Record button to capture the pictures.
View Photos
•Press the Forward or Backward button “ /” to view the recorded photos.
•Press the Play button “ ” to switch to Playback mode.
•In Playback mode, press the Preview button “ ” to switch back to Camera
mode.
unknown
Operating Your Tablet PC
EN-27
Delete Photos
1. Press the Play button “ ” to switch to Playback Mode.
2. Use the Forward or Backward button “ /” to select the photo that you
want to delete.
3. Press the Delete button “ ” and then choose Yes to delete the current
photo.
Record GPS Coordinates (Geotagging)
is the GPS signal status located on the top right corner of the main
program. GPS device must be implemented in the system for locating the
positions and recording the coordinates when capturing photos. If GPS coordinates
are not able to be received, the last coordinates would be used instead.
GPS status indicator
GPS device is working properly
GPS device is not available
GPS signals are unstable
If the user decided to use the external USB GPS device, do the following:
1. Press the Setup button “ ” to enter the Setup menu.
2. Tap > Auto Scan Comport.
The detected Port Number is displayed on the screen.
Operating Your Tablet PC
EN-28
How to Make Adjustments on Features:
Press the Setup button “ ” to enter the Setup menu.
Camera Selection:
There are three cameras that you can select: .
•“” – the camera is available and ready to use.
•“” - the camera is not available.
Press the Leave button “ ” after you have chosen the desired camera.
Resolution:
There are four resolution options that you can select: .
If the Camera does not support these four resolutions, a “Change Resolution
Error” message will appear on the screen. Press the Leave button “ ” to exit.
(Native: maximum resolution)
Operating Your Tablet PC
EN-29
Preview Size:
There are two preview size options that you can select: .
Press the Leave button “ ” after you have chosen the desired preview size.
Geotagging:
Tap ON to enable the Geotagging feature.
Press the Leave button “ ” to exit.
NOTE
•The Geotagging feature will only be activated if the tablet PC is equipped with
the GPS module.
•The camera logs the GPS position accurately if photos are taken outdoor.
Flash:
When capturing photos under the low light environment, tap ON to turn on the
LED Flash.
NOTE
•The effective flash range is 50cm.
Idle Timing:
There are five Idle Timing options that you can select:
.
Press the Leave button “ ”after you have chosen the desired time.
NOTE
•When the system is left idle for a certain period of time, the camera module(s)
would then stop running. It would be up and running again once user wakes up
the “DuraBook” application.
Making Connections
EN-30
Making Connections
This chapter will guide you on installing peripheral devices to maximize the use
of your tablet PC.
Installing the Memory Card
Your Tablet PC supports different types of memory cards to provide faster data
transfer. Supported types are as follows:
•SD card
•SDHC card
•SDXC card
•Mini-SD card (with adapter)
•Micro-SD card (with adapter)
•MS card (Memory Stick/PRO)
•MMC card
To insert a memory card:
1. Push down and pull to open the I/O port cover.
2. Push the memory card into the memory card slot until it clicks into place.
Making Connections
EN-31
Installing the SIM Card
You can use a SIM card for wireless internet access.
NOTE
•Check the availability of service and plan rates of data connection with your
network service provider.
To insert a SIM card:
1. Push down and pull to open the I/O port cover.
2. Push a valid SIM card into the SIM card slot until it clicks into place.
Connecting the Microphone/Headset
Your tablet PC is equipped with audio combo jack that enables you to use the
headset or microphone.
To connect to a headset, open the I/O port cover and plug the stereo
headphone cable into the audio combo jack of your device.
To connect to a microphone, open the I/O port cover and plug the
microphone cable into the audio combo of your device.
NOTE
•The headset and microphone are not included in the package. They are sold
separately.
Making Connections
EN-32
Connecting USB Devices
You can connect your tablet PC to other USB devices, such as a mouse,
keyboard, digital camera, printer, or an external hard disk drive.
1. Push down and pull to open the I/O port cover.
2. Connect one end of the USB cable to the USB port of your device.
3. Connect the other end of the cable to the USB device (if necessary).
NOTE
•The USB cable is not included in the package. It is sold separately or it may
come with your USB device.
Making Connections
EN-33
Connecting to Wireless Connections
Your tablet PC can connect and communicate with other Bluetooth-enabled
devices.
Connecting to a Bluetooth Device
Your tablet PC can connect and communicate with other Bluetooth-enabled
devices.
To add a device, follow the steps below:
1. Open the Quick menu.
2. Tap the Bluetooth icon ( ) to turn on the
Bluetooth function.
3. Tap the arrow on the task bar to display hidden
icons.
4. Tap the Bluetooth icon ( ).
5. Tap Add a Device. The system starts scanning for
Bluetooth devices and displays the available devices.
NOTE
•If the device that you want to add does not appear on the screen, please
check if the device is turned on and discoverable.
Making Connections
EN-34
6. Tap on a device, then tap Next to continue.
7. Tap Close to complete the pairing connection.
NOTE
•Most Bluetooth-enabled devices need to be paired with your tablet PC. The
PIN you enter on the tablet PC must be the same PIN to be entered on the
other Bluetooth device.
•Once a partnership has been created, connecting to that device again will no
longer require entering the PIN.
Making Connections
EN-35
Connecting to a Wireless Local Area Network
Your tablet PC comes with a WLAN module. A wireless network can be added
either when the network is detected or by manually entering the settings
information.
To connect, follow the steps below:
1. Open the Quick menu.
2. Tap the WLAN icon ( ) to turn on the wireless
network function.
3. Tap the wireless network icon ( ) on the task
bar.
4. Available wireless network connections are
displayed. Tap the desired wireless network.
5. Tap Connect.
Some networks require a network security key or
a password.
TIP
Check Connect automatically box to
automatically connect to this network when it is
available.
6. Enter the network security key.
7. Tap OK.
8. After the connection is established, you can see the wireless icon ( ) in the
Notification area.
NOTE
•Wi-Fi access requires service from a wireless service provider. Contact your
service provider for more information.
•Actual wireless connectivity will depend on system configuration. Please
contact your dealer for more information.
Making Connections
EN-36
Connecting to a Wireless Wide Area Network (WWAN)
With WWAN function, it allows your tablet PC to connect to the Internet using
mobile or cellular data networks.
To enable the function, follow the steps below:
1. Insert a valid SIM card into the SIM card slot.
2. Open the Quick menu.
3. Tap the WWAN icon ( ) to turn on the
WWAN function.
4. Launch AirCard Watcher application.
5. Tap Connect to enable the Internet
connection via mobile data network.
6. To disconnect the connection, tap
Disconnect.
Using the BIOS Setup Utility
EN-37
Using the BIOS Setup
Utility
Your tablet PC has a BIOS setup utility which allows you to configure important
system settings, including settings for various optional functions of the tablet PC.
This chapter explains how to use the BIOS setup utility.
BIOS Setup Menu
The BIOS Setup Utility allows you to configure your Tablet PC basic settings.
When you turn your tablet PC on, the system reads this information to initialize
the hardware so that it can operate correctly. Use the BIOS setup utility to
change your tablet start-up configuration. For example, you can change the
security and power management routines of your system.
Starting the BIOS Setup Utility
You can only enter the BIOS setup utility as the tablet PC is booting, that is
between the time you turn on the tablet PC and before the Windows interface
appears.
If your tablet PC is already on, shut down your tablet PC completely (power off)
and restart it and then press the Delete button to enter the setup utility.
NOTE
•You have to connect your device with an external keyboard first before
starting the BIOS Setup Utility.
Using the BIOS Setup Utility
EN-38
Navigating and Entering Information in BIOS
Use the following keys to move between fields and to enter information:
Keyboard Description
Å Æ Selects screen.
Moves up/down to select items.
Enter Confirms the selection and enters the selected menu screen.
+/ - Changes an option for the selected items.
F1 Displays the Help screen.
F2 Invokes the previous values.
F3 Loads optimized default values.
F4 Saves the changes and exits Setup.
Esc Exits any section. If you wish to exit the BIOS utility without
saving changes or go to the main menu, then press this key.
Users are allowed to enter new values to replace the default settings in certain
fields, and the rest of the fields are specified by system default parameters and
cannot be modified by users. Reverse the attribute of the main options and
press the Enter button to enter into the submenu. Press the Esc button to
return to the previous configuration page.
Using the BIOS Setup Utility
EN-39
Main Menu
The Main menu displays the system overview information about the device,
including the system date and time.
Item Description
BIOS Information Display the BIOS version detected during boot up.
System Information
Display the CPU type and speed, total memory, mainboard
version, Intel PCH SKU name, ME FW version, and ME
Firmware SKU.
System Date Set the system date.
System Time Set the system time.
Access Level Display the access level user.
Using the BIOS Setup Utility
EN-40
Advanced Menu
The Advanced menu allows you to configure specific system settings.
Item Description
Wake on LAN from
S4/S5 mode
Enable/disable the system to wake on the unit from Sleep
status when the AC power is connected.
BARCODE Display the barcode function status.
Switch to external
WWAN antenna
Display the status of auto switch function to external
WWAN antenna when docking.
Switch to external
GPS antenna
Display the status of auto switch function to external GPS
antenna when docking.
Radio Devices
Configuration Enable/disable radio devices.
FAN Calibration Enable you to do fan calibration.
Battery Calibration Enable you to do battery calibration.
Trusted Computing Configure Trusted Computing settings.
Using the BIOS Setup Utility
EN-41
Boot Menu
The Boot menu allows you to configure the boot settings and boot sequence.
Item Description
Bootup NumLock
State Select the keyboard NumLock state.
Fast Boot
Enable/disable boot with initialization of a minimal set of
devices required to launch active boot option. It has no
effect for BBS boot options.
CSM Support Enable/disable the system to launch an older OS.
Video Control the execution of the selected Video OpROM type.
Boot Option Priorities Set the system boot order.
Using the BIOS Setup Utility
EN-42
Security Menu
The Security menu allows you to set or change the Administrator and User
passwords.
Item Description
Administrator
Password Create or change the Administrator password.
User Password Create or change the User password.
Using the BIOS Setup Utility
EN-43
Save & Exit Menu
The Save & Exit menu allows you to save/discard the changes and restore the
default values for all setup options before leaving the BIOS Setup Menu.
Item Description
Save Changes and
Reset Reset the system after saving the changes.
Discard Changes and
Reset Reset the system setup without saving any changes.
Restore Defaults Restore the default values for all the setup options.
Specifications
EN-44
Specifications
Item Category Specifications
CPU Type &
Speed
•Intel Haswell U series CPU i3/i5/i7
•Intel Haswell Y series CPU
System Memory
Main Memory
•DDR3L 1333
•One 204-pin DDR3L SODIMM socket for 4GB, 8GB
Maximum
Memory 8 GB
Mass Storage SSD
•M2-SATA SSD 64GB/128GB (M2 Type, 2242)
•One M2 Socket for SSD 2242-D5-B
•M2 SSD is a CTO Option
Video
LCD Display
& Touch
Panel
Standard
Power Button suspend to Ram (User selectable in
OS Power Management Menu) 11.6” HD (1366x768
resolution) TFT LCD LED backlighting, brightness
Before Touch Typical: 400nits (min: 340nits)
Capacitive multi-touch panel After touch Typical:
360 nits (min: 306 nits)
Advanced
Power Button suspend to Disk (User selectable in OS
Power Management Menu) Optional 11.6” HD
(1366x768 resolution) TFT High Brightness LCD
Before Touch Typical:800 nits (min: 680 nits)
AR capacitive multi-touch panel After touch
Typical:736 nits (min: 625 nits)
Note:
•High brightness LCD with capacitive multi touch is
through optical bonding
•Drop ball spec 227g, 90 cm
All the glasses of touch panel are tempered glass.
Audio Features
Intel high definition audio
One speaker, sound pressure 80dB at 0.5M Average
at 0.8, 1K, 1.2K, and 1.5KHz with nominal power
One microphone
Expansion Slot One Micro SD card slot
Support SDHC, SDXC
Specifications
EN-45
Item Category Specifications
Communications Network/
Wireless
Intel Centrino Wireless AC 7260 (M2 socket type
2230)( WLAN 1x1 a/b/g/n/AC, Bluetooth 4.0 Class
1)
One M2 Socket for WLAN 2230-S3-E
Optional integrated M2 module (Type 3042)for
WWAN/GPS EM7355 Module & EM7305 module for
Europe
One M2 Socket for WWAN3042-S3-B
GPS active antenna(CTO) and WWAN antenna(CTO)
Optional independent GPS module which is co-
located in the location of WWAN M2 module
WWAN/GPS is a CTO option (One SIM Card slot)
Other I/O
Devices
Document
Camera
Optional Integrated rear facing 5Mega Pixel camera
at the back of unit
With LED flash light with 1500mcd, viewing angle
120º
LED flash light can be triggered when taking a photo
Support GeoTagging in the EXIF of JPEG file
Stable image: <35ഒ
Document camera is a CTO option
Web Cam Full HD Camera on the top of the front panel
Barcode
Scanner
Optional Barcode scanner, support 1D, 1D/2D barcode
(CTO). When the scanner successfully reads a bar code,
the scanner will sound beep.
1D/2D
(Optional) Intermec EA11+ ED30 with RS-232
interface
Angle: 38.9° (Horizontal), 25.4°(Vertical)
Range: 3.4- 83 cm
Print Contrast: Min. 25%
Ambient light condition: 0~100,000Lux
(Optional) Intermec EA31+ ED30 with RS-232
interface (Design Ready)
Range: 5.5 -75 cm
Note:
zBarcode Scanner is Located on the back side of unit.
zEA11&EA31&EV14 are designed in the same
location.
zBarcode Scanner is a CTO option.
Specifications
EN-46
Item Category Specifications
Other I/O
Devices
I/O Ports
Two USB3.0
One 3.5mm Audio combo jack for Mic/headset(CTIA
standard)
One docking connector
One Expansion connector for Ext. devices on the
back top side of the unit (1 x power, 1 x RS-232, 2 x
USB 2.0)
DC-in Jack
Note:
•An I/O door (located on the right side of the unit) is
designed to cover the USB port, audio jack, Micro
SD card slot.
•SIM card can be changed by opening the I/O door
RF connectors located at the bottom (Factory
Option)---(Dual antenna connectors that can pass-
through wireless connections including WWAN and GPS)
RF switch board is CTO
(Docking connector includes 1 x power, 1 x USB 3.0
(Including USB 2.0), 1 x HDMI)
NFC/RFID
Optional Ext. RFID reader support ISO 15693,
14443A/B stand, NFC ISO 18092 (work within
2cm) (Design/interface Ready)
NFC/RFID is a CTO option (located on the back
side of unit
MSR and
Smart card
reader
Optional Ext. Magnetic Stripe Reader support
ANSI/ISO 7810, ISO 7811-1/6, 7813, JIS X6301,
X6302, AAMVA
Two-frequency coherent phase (F2F) recording
methods
ISO Track1 - IATA , Track2 - ABA and Track3 -
THRIFT decoding methods
Bi-directional card reading
Supplies 54 byte value
Encrypts all track data and the value
Card speed through the unit may vary from 3 ips
to 100 ips (7 cm/s to 250 cm/s)
Optional ext. smart card reader slot meets ISO 7816.
MSR/smart card module is a CTO option.
Note: MSR module doesn’t support IP65 feature.
Specifications
EN-47
Item Category Specifications
Other I/O
Devices
Digitizer
Optional digitizer and active stylus pen with USB
interface battery-charger.
Note: The digitizer ONLY can be for the high brightness
LCD.
G-sensor,
Gyroscope,
and
E-compass
Build-in G sensor auto switch Landscape/Portrait
mode
E-compass and G-sensor auto rotate the map to
the user’s facing direction.
G-sensor and Gyroscope calculate the car’s
traveling distance when GPS can’t receive the
signals.
Note:
zFor Windows 7: Default: ONLY one G-sensor, design
G-sensor on the motherboard.
zFor Windows 8: Default: G-sensor, Gyroscope, and
E-compass
zDesign 9 axis sensor on the daughter board.(CTO)
Light Sensor Built in light ambient light sensor
Power
AC Adapter
Output: 19V, 3.42A; 65W
Input: 100V-240V, 50Hz-60Hz
Plug type: L shape
Plug length and diameters: 12mm, 5.5mm
Battery
Module
One main battery pack in a unit.
Lithium polymer battery pack (11.1V, 4130 mAH,
3S1P, 46 W)
Charging time: 3.5hrs to fully charge only one
battery pack in the unit when system is off
(Charging Environment Temperature in 25°C)
Note: Remove battery without using tool.
Battery Life
7 hrs depends on configuration
(LCD brightness ʁ 60 nits, Battery Mark 4.0.1/ Life test
Method)
*Battery life’s test configuration depends on QRS report
Dimension &
Weight
11.6" TFT HD B116XAN03.0 AUO
Dimension: 298.5*192.0*20 mm
Weight: 1.23 kg (with main battery without
optional devices)
Note: The depth of the barcode scanner area is 24.4
mm. The other area of system is 20 mm.
Specifications
EN-48
Item Category Specifications
Environment
Temperature
/ Humidity
Operating Temperature烉-10°C~ 55°C (Test Method:
MIL-810G 501.5 Procedure II Modified)
Note:
•The battery charging when the ambient temperature
0°C~ 45°C (±3°C)
•The battery discharging temperature when the
ambient temperature -10~55°C
Storage Environment Temperature烉 -33°C ~71°C
Test Method:
High temperature Storage, MIL-810G, Method
501.5 Procedure I climatic category A1 – Hot
Dry. (Modified)
Low temperature Storage, MIL-STD-810G,
Method 502.5, Procedure I climatic category
C1 – Basic Cold
Operating Humidity: 95% (based on QRS test
condition)
Battery /
Adapter
Power Mode
Battery mode:
Back side skin spec: delta T < 烌20 degree C at
Ta=25
Panel skin spec: delta T <烌 20 degree C at Ta=25
Vertical test
Adapter Power mode:
Panel skin: delta T <烌 20 degree C at Ta=25 in
charging
*Design and Specifications are subject to change without prior notice.
Appendix
EN-49
Appendix
Copyright
Copyright© 2014. All rights reserved.
No part of this user manual may be transmitted, stored in a retrieval system, or
translated into any language or computer language, in any form or by any
means, without the prior written permission of the manufacturer. Information is
subject to change without prior notice.
Regulatory Statement
Federal Communications Commission
Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables and shielded AC power cable must be employed
with this equipment to insure compliance with the pertinent RF emission limits
governing this device. Changes or modifications not expressly approved by the
system's manufacturer could void the user's authority to operate the equipment.
Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the
following conditions:
Appendix
EN-50
This device may not cause harmful interference
This device must accept any interference received, including interference
that may cause undesired operation.
RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users and installers must be provided with
antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
SAR ValueVWDQGDORQH:.W/kg
6$59DOXHVLPXOWDQHRXVWUDQVPLVVLRQ :NJ
This device is operation in 5.15 – 5.25GHz frequency range, then restricted in
indoor use only, Outdoor operations in the 5150~5250MHz is prohibit.
This device is slave equipment, the device is not radar detection and not ad-hoc
operation in the DFS band.
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada
(IC) radio frequency exposure limits. The Wireless Device should be used in such
a manner such that the potential for human contact during normal operation is
minimized.
This device has been evaluated for and shown compliant with the IC Specific
Absorption Rate (“SAR”) limits when installed in specific host products operated
in portable exposure conditions.
Canada, avis d'Industry Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-
003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil
ne doit pas causer d'interférence et (2) cet appareil doit accepter toute
interférence, notamment les interférences qui peuvent affecter son
fonctionnement.
Appendix
EN-51
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite
d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l’appareil de
sans fil de façon à minimiser les contacts humains lors du fonctionnement normal.
Ce périphérique a été évalué et démontré conforme aux limites SAR (Specific
Absorption Rate – Taux d'absorption spécifique) d'IC lorsqu'il est installé dans
des produits hôtes particuliers qui fonctionnent dans des conditions d'exposition
à des appareils portables.
Battery Disposal
THIS PRODUCT CONTAINS A LITHIUM-ION OR NICKEL-METAL HYDRIDE
BATTERY. IT MUST BE DISPOSED OF PROPERLY. CONTACT LOCAL
ENVIRONMENTAL AGENCIES FOR INFORMATION ON RECYCLING AND
DISPOSAL PLANS IN YOUR AREA.
CLASS 1 LASER PRODUCT
LASERSCHUTZKLASSE 1 PRODUKT TO EN60825
CAUTION
(ATTENTION):
THIS APPLIANCE CONTAINS A LASER SYSTEM AND IS
CLASSIFIED AS A "CLASS 1 LASER PRODUCT.” TO USE THIS
MODEL PROPERLY, READ THE INSTRUCTION MANUAL
CAREFULLY AND KEEP THIS MANUAL FOR FUTURE
REFERENCE. IN CASE OF ANY TROUBLE WITH THIS MODEL,
PLEASE CONTACT YOUR NEAREST "AUTHORIZED SERVICE
STATION.” TO PREVENT DIRECT EXPOSURE TO THE LASER
BEAM, DO NOT TRY TO OPEN THIS ENCLOSURE.
ġ
ANNEX IV
Symbol for the marking of electrical and electronic equipment
The symbol indicating separate collection for electrical and electronic equipment
consists of the crossed-out wheeled bin, as shown below. The symbol must be
printed visibly, legibly and indelibly.
ġ
Appendix
EN-52
CAUTION FOR ADAPTER
THE TABLET PC IS FOR USE WITH DEDICATED AC ADAPTER.
BATTERY SAFETY
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE
MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE
MANUFACTURER'S INSTRUCTIONS.
CAUTION FOR RJ-45
The RJ-45 jack is not used for telephone line connection.
Appendix
EN-53
Safety Instructions
These safety instructions should always be observed to ensure safe operation
when handling the device.
•Do not place this device on an unstable table or surface. The device may fall,
causing serious damage to its housing and components.
•Do not cover the device, or block the air ventilation holes of the device with
any other objects.
•Do not use any sharp object to tap on the display screen.
•Do not expose the device to direct sunlight and dusty environments.
•Keep the device away from excessive heat and humidity.
•Keep liquids away from the device.
•Keep the device away from any magnetic emitting devices as this may affect
the quality of the wireless signal reception.
•When using an AC adapter:
9Place this device in a location that is close enough to an electrical
outlet to accommodate the length of the power cord.
9Operate this device only with the type of power source indicated on the
device marking label.
9Disconnect the AC adapter from the electrical outlet if the device is not
being used for an extended period of time.
•When cleaning the device,
9Be sure to turn off the device properly and unplug the AC adapter
before cleaning.
9Wipe the device with a clean, dry cloth.
9Do not use abrasive cleaners to clean the device.
•Do not attempt to disassemble or repair this device. Doing so will void the
warranty.