Twinhead F17PT Notebook Computer with Built-in 802.11b/g WLAN User Manual

Twinhead International Corporation Notebook Computer with Built-in 802.11b/g WLAN Users Manual

Users Manual

ENGLISHUUsseerr’’ssMMaannuuaall
ENGLISHiiTable of ContentsCHAPTER 1GETTING STARTED 1Getting Started ................................................................................... 2Inventory ............................................................................................. 3Safety and Maintenance .................................................................... 4Checklists ........................................................................................... 5Features .............................................................................................. 6Where to Look For Information......................................................... 7Quick Start .......................................................................................... 8Loading Windows .............................................................................. 9Adjusting the Volume ...................................................................... 10Adjusting the Brightness ................................................................ 10Turning off Your Computer............................................................. 11Making a Startup Disk...................................................................... 11Tips for New Owners ....................................................................... 12CHAPTER 2GETTING STARTED 15Hardware and Software ................................................................... 16Front View......................................................................................... 17Back View.......................................................................................... 18Right View......................................................................................... 19Bottom View...................................................................................... 20LED Status Indicators...................................................................... 21Power Indicators .............................................................................. 22Function Keys .................................................................................. 22Numeric Keypad............................................................................... 22Touchpad .......................................................................................... 23The COMBO or DVD-Dual Drive...................................................... 25Connecting the Printer .................................................................... 26The PC Card Slot.............................................................................. 27Memory.............................................................................................. 28The Graphics System ...................................................................... 29Communication Components......................................................... 33Built-in Wireless Local Area Network ............................................ 35
ENGLISHiiiCHAPTER 3MAKING CONNECTIONS 38Making Connections ........................................................................ 38Back Side Connectors ..................................................................... 38Right Side Connectors .................................................................... 40Front Side Connectors .................................................................... 40CHAPTER 4SYSTEM SOFTWARE 42System Software .............................................................................. 42System Recovery ............................................................................. 43CHAPTER 5POWER MANAGEMENT 48Power Management ......................................................................... 48Power Saving Modes ....................................................................... 53Power Saving Tips ........................................................................... 55When to Replace the Battery .......................................................... 56Heat Considerations ........................................................................ 58CHAPTER 6USING THE BIOS SETUP UTILITY  60Using the BIOS Setup Utility ........................................................... 60Navigating and Entering Information in BIOS............................... 61The Main Menu ................................................................................. 62Advanced Menu................................................................................ 63Boot menu......................................................................................... 64Security menu .................................................................................. 65Exit menu .......................................................................................... 66Change User Password ................................................................... 67Change Supervisor Password ........................................................ 67CMOS Optimal Defaults................................................................... 67Exiting and Saving ........................................................................... 67APPENDIX A FREQUENTLY ASKED QUESTIONS 70Frequently Asked Questions .......................................................... 70APPENDIX B STATEMENTS 74Statements........................................................................................ 74European Notice............................................................................... 76
ENGLISHivUL CAUTION ..................................................................................... 77Canadian Department of Communications ................................... 78Battery Disposal............................................................................... 79CAUTION FOR ADAPTER................................................................ 79BATTERY CAUTION......................................................................... 79CLASS 1 LASER PRODUCT............................................................ 79
ENGLISHCChhaapptteerr11IInnttrroodduuccttiioonn
ENGLISHChapter 1 — IntroductionGetting StartedCongratulations on your purchase of the Notebook computer! Yournew notebook features the most innovative advances in portablecomputing technology. It combines state-of-the-art ergonomics withsophisticated architecture to provide you with a personal computer that is compact, powerful, and easy to use. Designed for a wide range of general, business, and personal productivity applications, the notebook is an ideal choice for use in the office, at home, and on the road.For maximum expandability without compromising portability, thenotebook accommodates a number of modules, including COMBO/DVD-Dual Drive, four USB ports, one PCMCIA slot and one 4 in 1 memory slot. The high capacity hard disk drive provides you withplenty of storage space for multimedia files and applications.This Manual contains all the information you need to set up and useyour new notebook. It describes all the features of the notebook in an easy-to-read yet thorough manner.2
ENGLISHIntroduction — InventoryInventoryThis computer system is designed for years of productive andpleasurable computing. Use this section to keep details of your purchase. This information will be required should you need to makerepairs to your notebook during the warranty period. Update this section when you add new options.DATE OF PURCHASE: PLACE OF PURCHASE:DEALER'S NAME:DEALER'S ADDRESS: TELEPHONE:E-MAIL ADDRESS/WWW:CONTACT PERSON:MODEL NUMBER:SERIAL NUMBER:BIOS VERSION: The serial number is on the label (with a bar code) on the bottom sideof the computer. The BIOS revision number will appear briefly on thescreen after turning on the computer, before the graphic BIOS screenappears. Press the Del key to enter BIOS setup screen.3
ENGLISHChapter 1 — IntroductionSafety and Maintenance You can use your computer under a wide range of environmentalconditions. However, to ensure long use and continued highperformance, consider the following factors when setting up yourcomputer:xFollow all warnings and instructions noted in this documentationand in the Windows Help program.xThe first time you use your computer, we recommend that you carefully read the Making Connections section of this manual and initialize the battery to ensure optimum battery performance.xUnplug the computer from the power outlet before cleaning. Use a damp cloth for cleaning. Do not use aerosols, solvents, or strong detergents.xDo not use the computer near open water or other liquids. Never spill liquid onto the computer.xDo not place the computer in an unstable location where it might slip or be knocked over. Serious damage could result from a fall. xSlots and openings in the system cabinet are for ventilation purposes. Do not block or cover these openings or the system could overheat. Do not use or store the computer near a source of heat or dust.xOn the base or rear panel of this notebook, there is a label with information on the power requirements of this system. Theserequirements must be followed. If you are unsure of your localpower supply, consult your dealer or local Power Company.xDo not step on or place anything on the power cord.xIf you use the computer with an extension cord, ensure that the total ampere ratings of all the devices sharing the extension do not exceed the rating of the extension cord or the rating of the wall outlet. xNever push foreign objects into the computer through any of the slots or openings. Dangerous voltages are present, which couldcause electric shock or fire, or damage sensitive components.xFor best results, use a power strip with a built-in surge protector.Do not use inferior extension cords as this may result in damage to your computer.4
ENGLISHIntroduction — ChecklistsxSet the computer on a flat, stable surface. To prevent damage to the computer’s hard disk drive, avoid using the computer whereit will be exposed to strong vibration.ChecklistsAfter opening the package, carefully inspect the contents. If any of theitems is missing or appear damaged, contact your dealer. Theshipping carton should contain the following:STANDARDxA notebook computer with a hard disk drivexAn internal battery xA COMBO or DVD-Dual drivexAn AC adapter with power cord x User's Manualx System software CDOPTIONSThe following items are normally optional, but some vendors may include them in the standard package. Some items may not beavailable in some countries, or some vendors may choose not to carryall the items.x256 MB or 512 MB SODIMM memory cardsxA Carry bag 5
ENGLISHChapter 1 — IntroductionCaution: When purchasing any of the accessories listed above, purchase only those accessories that are approved for use with your computer. The above accessories are proprietary items. Your system vendor can obtain these approved accessories. If you use items that are not approved for use with this computer, you may cause your computer to malfunction, or to emit or receive electro-magnetic radiation in excess of local regulations. For non-proprietary accessories such as PC cards or printers, ensure that the accessory functions properly in your computer before making the purchase. Your system vendor may be able to recommend reliable brands and models.FeaturesHigh Capacity Hard Disk DriveThe computer has a high capacity hard disk drive, to store your favorite programs and large multimedia files.Built-in Modem/LAN CapabilityA built-in 56k modem and 10/100 Mbps Ethernet port allows you to accessthe Internet or a local area network (LAN).LCDYour computer has an easy-to-view WXGA LCD panel.Built-in Stereo SpeakersThe stereo and woofer speakers enable you to run a variety of multimedia applications.Convenient Audio ControlThe conveniently located audio control knob enable you to easily adjust the volume to the stereo speakers.Launch Keys and Function KeysFour Internet launch keys give you quick access to e-mail and the Internet.Function keys give you easy control of power management and your monitor.6
ENGLISHIntroduction — Where to Look For Information Where to Look For Information About Your ComputerThis User’s Manual describes the key elements of your computer. New users can find a simple step-by-step orientation in the Quick Start section of this chapter. About WindowsWindows Online Help, found on the Start menu, offers extensive Windowsassistance. Tour Windows XP offers an online orientation for newWindows users. Find it in: Start/Programs/Accessories/System Tools.7
ENGLISHChapter 1 — IntroductionQuick StartTurning on the Computer for the First Time1. Connect the AC adapterpower cord to the AC adapter.2. Connect the AC adapterto the DC power port on the back side of your computer.3. Connect the AC adapterpower cord to an AC outlet.4. Slide the cover latch in the direction of the arrows to open the LCD. 5. Open the LCD panel to a comfortable viewing angle.6. Press the power button to turn on the power. Note: The battery is not fully charged.Allow your battery to fully charge beforeusing it (i.e., before disconnecting AC power). Calibrating the battery before useis also highly recommended. Refer to Chapter 5, Power Management, for further information.Use the touchpad to move the cursor on the screen. Move your finger across the pad to control the cursor, and press the right and leftbuttons beneath with your thumb. These buttons have the samefunctions as the right and left buttons of a standard mouse. You canalso click or double-click by tapping on the touchpad.8
ENGLISHIntroduction — Loading WindowsLoading WindowsThe following section is for installing the Windows operating systemonly. If you are installing a different operating system, please check with your vendor for installation details.Product key numberYour computer will begin loading Windowsonce you turn on the power. Wait a few seconds for Windowssetup to load. The Windows setup will prompt you for the product key number,shown to the right:Note: The product key is on a stickerattached to the bottom of the Notebook.1. Type your name, and, if applicable, the name of your company.2. Read the End User's License Agreement. Click Next to accept it. 3. Enter the product key number. You can find this on theCertificate of Authenticity on a sticker attached to the computer.Click Finish.4. The Start Wizard will prompt you to set the date, and your localtime.After the Start Wizard updates your system settings, the Welcome to Windows screen will appear. You may disable this feature by clearingthe check box labeled show this screen each time Windows starts.Some software comes preloaded with Windows. New users canfamiliarize themselves with this software by selecting Programs from the start menu, then clicking on programs to run them.9
ENGLISHChapter 1 — IntroductionAdjusting the VolumeYou can adjust the volume with the volume control knoblocated below the touchpad.Volume control buttonAlternatively, you can adjustthe volume with the Windowsvolume control applet locatedon the taskbar.Adjusting the Brightness Use the following hot key combinations to adjust the LCD panelbrightness:xFn + F6 decreases the brightnessxFn + F7 increases the brightness10
ENGLISHIntroduction — Turning off Your ComputerTurning off Your Computer Turning off the computer properly is important to maintaining your computer.1.On the Start menu, clickShut Down.2.Click the radio button next to Shut Down in the Shut DownWindows screen, and then click OK.If you are going to be away from the computer for a short period, thereare ways of conserving power without shutting down the system. See Chapter 5, Power Saving Modes, for details.Warning: Shutting off the computer improperly may result in data loss.Making a Startup Disk If you have trouble starting Windows, the startup disk can be used tostart your computer and fix many problems. Refer to the Windows user manual for instructions.11
ENGLISHChapter 1 — IntroductionTips for New Owners Take responsibility for backupBack up files often. Users who need to manage large amounts of data may wish to use backup devices such USB drive. If you use your notebook as a networked workstation with system backup, talk to the system administrator about backup procedures for your notebook.Don't leave passwords anywhere on your notebook or carrying caseBe careful when placing your notebook on an airportsecurity conveyor beltIn most airports, security conveyor belts are safe for computers. If youare not sure, ask the security staff. You should keep a close eye on your computer. When you are in a hurry, make sure that you walk away with the correct notebook computer!Tape your business card to the notebook and accessoriesIn the workplace, notebooks and accessories may often look exactlyalike, leading to equipment mix-ups. Prevent such mix-ups by placing your name on your equipment.Develop ergonomic work habitsThe science of ergonomics studies the relationship between healthand a suitable work environment. For more information on ergonomics,contact your nearest computer bookstore, or local library. The Internetalso has information on this and other related subjects.12
ENGLISHIntroduction — Tips for New OwnersNever take the notebook anywhere without the carrying caseA broken screen or case can be costly to repair. Prevent accidents by carrying the computer in a suitable carrying case.Consider using a lockFor added security, consider purchasing a Kensington lock to put intothe Kensington lock hole on the left side of your computer (seeChapter 2, back View). Use the Kensington lock to secure the computer to a desk or table.Note: Using a computer for extended periods of time with a poor workstation setup and incorrect work habits can cause health problems. 13
ENGLISHChapter 1 — Introduction14
ENGLISHCChhaapptteerr22GGeettttiinnggSSttaarrtteedd
ENGLISHChapter 2 — Getting StartedHardware and SoftwareThis chapter introduces the different components and controls of your notebook computer, including the hardware components, the software, and the audio and video systems.Getting StartedBefore you begin using your computer, read this chapter to familiarize yourself with the main components installed in the system. Slide the screen latch on the front edge of the cabinet towards the right to release the cover latch and open up the computer.16
ENGLISHGetting Started — Front ViewFront View1. DVD-ROM/Combo drive2. DVD-ROM/Combo eject button3. Audio-out jack for external speakers or headphones4. Microphone-in jack5. IR reciver6. Power indicators17
ENGLISHChapter 2 — Getting StartedBack View1. VGA port external video display port 2. IEEE-1394 port3. 4 sets USB ports4. LAN RJ-45 jack5. Fax/modem RJ-11 Jack6. AC-adapter port7. S-Video8. Kensington lock hole 9. Ventilation slots18
ENGLISHGetting Started — Right ViewRight View1. PCMCIA card slot 2. PCMCIA card eject button3. Ventilation slots4. 4 in 1 memory slot 19
ENGLISHChapter 2 — Getting StartedBottom View1. CPU Ventilation slots2. FCC Label3. Ventilation slots4. Battery release button 5. SO-DIMM RAM compartment6. Woofer7. Battery8. HDD compartment20
ENGLISHGetting Started — LED Status Indicators LED Status IndicatorsThe status indicators in the upper right corner of the keyboard light up when a particular function of the computer is active. Each indicator is marked witha symbol. CD ROM DriveThe computer is reading informationfrom the DVD-ROM or the Combodrive.HDD The computer is reading from, or writing to the built-in hard disk.Number-Lock The keyboard is in Num-Lock mode.Caps-Lock The keyboard is in Caps-Lock mode.Scroll-Lock The keyboard is in Scroll-Lock mode.Wireless LAN Wireless LAN is in use Battery StatusGreen- Power is on and the battery is in use. Flashing Green-Battery is chargingRed- Battery malfunction21
ENGLISHChapter 2 — Getting StartedPower Indicators The power indicators show which power source the system is using. Thepower indicators remain active and viewable even when the LCD panel is closed.Icon Light DescriptionBlue Power is on and the AC adapter is in use Flash blue  Power is in suspend modeBlue Wireless LAN is in use Green Power is on and the battery is in use FlashingGreen Battery is chargingRed Battery malfunctionFunction KeysHold the Fn key while pressing the numbered function key.Function key DescriptionFn + F3  Toggles display on/offFn + F4  Suspend to RAM/HDD Fn + F5  Toggles between LCD/CRT displaysFn + F6  Decreases LCD brightnessFn + F7  Increases LCD brightness22
ENGLISHGetting Started — Numeric KeypadNumeric KeypadThe embedded numeric keypadconsists of ten keys that makenumber intensive input moreconvenient. Press <NumLock> to enable or disable the numerickeypad.TouchpadThe touchpad is a pressure sensitive pointing device that provides all the features of a two-button mouse. Its primary function is to move the cursor around the screen.Touchpad buttonsTouchpadThe instructions listed below describe how to use the touchpad.1. First, place your fingers on the keyboard in the normal typing position. The touchpad is easily accessible by moving either yourleft or right thumb off the space bar and on to the touchpad.2. Gently move your thumb across the pressure-sensitive touchpad inthe direction you want the cursor to move. The pad detects thechange in pressure and moves the cursor in the correspondingdirection.3. The touchpad offers another method of making selections in a software program. It is called double-tapping. This functioncorresponds to double-clicking with a mouse. Once the cursorhas been moved to the object you want to select, lightly double-tap the pressure sensitive touchpad. This double-tapping on the 23
ENGLISHChapter 2 — Getting Startedtouchpad will select the desired item and prompt the software to perform the related operation.4. The buttons located directly below the touchpad are the same infunction as those on a two-buttoned mouse. Clicking these buttonsmakes selections, drags objects, or performs a variety of otherfunctions depending on the software. To select an object, first movethe pointer over the object you want to select, and then press theleft button one time. The functions of these buttons are softwarespecific.5. Double-clicking is a common technique for selecting objects orlaunching programs from icons. Once you have moved the pointer over the object you wish to select, rapidly press the leftbutton two times. This action is commonly referred to as “double-clicking” an object.DraggingThere are two ways to drag:xMove the pointer to the desired location then press down the leftbutton. While still holding down the left button, move the pointer to the desired location. Release the button. xMove the pointer to the desired location. Tap the touchpad twice quickly as if you were double-clicking, however do not removeyour finger after the second tap. Move the cursor to the desiredlocation. Lift your finger to finish dragging. Adjust the touchpad settings by selecting Settings/ControlPanel/Mouse/Buttons. These settings allow you to change the orientation of the touchpad from right-handed to left-handed, and fine tune the pointermovement and timing of clicks.Touchpad Precautions The Touchpad is a pressure-sensitive device. If not properly cared for, it can be easily damaged. Please take note of the following precautions.xMake sure the touchpad does not come into contact with dirt, liquids or grease.xDo not touch the touchpad if your fingers are dirty.xDo not rest heavy objects on the touchpad or the touchpadbuttons.24
ENGLISHGetting Started — The COMBO or DVD-Dual Drive The COMBO or DVD-Dual Drive Your computer comes with a pre-installed COMBO or DVD-Dual drive. TheDVD drive can read both DVDs and CDs. Your notebook identifies the drive with the letter following the hard drive letter. If your hard drive is D, then the DVD drive will be E.Inserting a Disk1. Press the button on the front of the drive to open the disk trayand pull the tray open. 2. Place the disk on the tray, label side up.3. Place the disk on the central spindle and press gently until the disk clicks into place.4. Slide back the tray until it clicksshut.Removing a Disk1. Make sure the computer is not accessing the DVD drive. 2. Press the eject button and pullthe tray all the way out. 3. Pick up the CD by the edges andremove the disk from the tray. Push the tray into the computeruntil it closes fully.Warning: When the computer is reading from a DVD-ROM/COMBO, the indicator light for the DVD-ROM will flash on. Do not attempt to remove a disk while this light is active.Precautions for Handling DVD-ROM DiscsKeep these precautions in mind when handling DVD-ROM discs.xAlways hold the disc by the edges; avoid touching the surface of the disc. xUse a clean, dry, cloth to remove dust, smudges, or fingerprints.Wipe from the center outward.25
ENGLISHChapter 2 — Getting StartedxDo not write on the surface of the disc.xExtremes in temperature may damage discs. Store discs in a cool dry place.xDo not use benzene, thinners, or cleaners with detergent. Only use DVD-ROM cleaning kits.xDo not bend or drop the discs.xDo not place objects on top of discs. Warning: Do not insert any foreign objects into the disc tray. Do not force the tray to open or close manually. When not in use, keep the tray closed to prevent dust or dirt from entering the drive unit. If you experience difficulty when removing a CD disc, stretch a paper clip (or use a pin or a thin metal rod) and insert it into the emergency eject hole located on the front panel:The CD disk tray should eject immediately. This procedure can also be used to remove a CD from the drive when the notebook is powered off.Connecting the Printer To connect a printer to your notebook via the USB port, use the suppliedUSB to printer adapter cable.Note: Before use, you must install the driver for the adapter cable.The PC Card Slot The PC card slot can be used as an interface between your computer anda variety of communications devices, such as network adapters, SCSI26
ENGLISHGetting Started — Memoryadapters, fax/modems, or provide additional data storage capacity. Yourcomputer's PC card slot supports PCMCIA Type II, 32-bit CardBus, and Zoomed Video cards.Installing a Card 1. The top side of a PC card is usually identified with a label.Insert the card into the slot with the label side up and the edgewith pinhole contacts going in first.2. Insert the card into the slot. You will feel some resistance as the card slides into the back of the slot.3. PC cards require drivers, or a program that allows the operatingsystem to use a specific device. Many drivers are included withWindows, but if not, you will be prompted to install the driver included with your card. 4. The computer will beep twice to indicate successful installation. A single beep means that there was a problem recognizing the card.Push the button to eject the card.Slide the card into the slot. Note: Please read the instructions included with individual PC cards. Some cards may be inserted with power on, while others require that the computer be turned off.Removing a Card 1. If a card is in use, press the eject button on the card slot to releasethe button.2. Press again to release the card.MemoryAdding memory allows the computer to operate faster, handle more taskssimultaneously, and work more smoothly with large files. Users whoincrease memory demands - by adding additional programs, for example - may notice a slowdown in operating speed, and wish to increase memory.27
ENGLISHChapter 2 — Getting StartedThe notebook includes a memory card slot for adding additional memory.Note: Use only 1-inch DDR SODIMM (200 pin) modules.Removing a Memory Card1. Turn off the computer and disconnect the AC adapter. Turn the computer upside down and lay it on a flat surface.2. Carefully remove the two RAM compartment cover screws andremove the RAM compartment cover.3. Gently pull tabbed latched in the direction of the arrows (1). Thecard will pop up slightly.4. Pull upwards on the card and then slide the card out (2). Inserting a Memory Card1. Hold the memory card by its edges with the edge-connectorside towards the slot.28
ENGLISHGetting Started — The Graphics System2. Hold the card at a shallow angle (about 25 degrees) and insertthe edge connector into the connector slot (3). The “gold teeth” of the edge connector should no longer be visible when the card is fully inserted.3. Press the card downwards so that it is flat inside the compartment (4). You may hear an audible click as the latchesof the connector lock the card in place.4. Replace the RAM compartment cover and secure it with the twoscrews.Your notebook computer will automatically detect the change in RAMcapacity when it restarts.The Graphics System Your computer has a high-performance graphics system, which can easily handle the demands of today's multimedia computing.29
ENGLISHChapter 2 — Getting StartedScreen ControlsBrightnessFunction keys can increase or decrease the brightness of the monitor.x<Fn> + <F6> decreases the LCD panel brightnessx<Fn> + <F7> increases the LCD panel brightnessResolution1. Click My Computer/Control Panel/Display/Settings. Click the Settings tab. The dialog box indicates the monitor resolution.2. Use the slide bar to adjust the resolution. Normally, you shoulduse the resolution the LCD or monitor was designed for.Note: Using a lower resolution than the screen was designed for will reduce the area of the display. Using the computer in DOS mode may produce the same effect, because it uses a 640 by 480 resolution by default. You can stretch these low resolution displays to full screen size by selecting either the Expanded Display or Display Expansion Mode features in the BIOS utility. However, the stretching may cause distortion, especially to fonts.High Resolution with an external monitorHigher resolution modes may be used, as long as the monitor supportsthem.Connecting to an External MonitorThe notebook has a VGA monitor port to connect your computer to an external monitor.Using the VGA monitor port1. Locate the 15-pin VGA monitor port on the back side of your notebook and connect the video signal cable from the externalmonitor (or the VGA adapter) to the monitor port.2. Connect the power cable from the external monitor to a poweroutlet and turn on the monitor.3. On your notebook, click the right touchpad button on theWindows desktop to open the desktop menu. Click Properties to open the Display Properties window.4. In the Display Properties window, click Advanced in the Settings tab. Click the Display Modes tab.30
ENGLISHGetting Started — The Graphics System5. Under Driver mode, you can select the appropriate options to change the display to an external monitor.6. Adjustments to screen resolution and color depth can also bemade in this dialog box.Dual DisplaysWith Windows system, you may use an external monitor simultaneouslywith your notebook’s LCD. You may also use the external monitor only and disable the LCD or only use the LCD. To do this you may first need to enable the multiple display settings in Windows.1. Open the ControlPanel.2. Double-clickDisplay. The DisplayPropertieswindow opens.3. Click theSettings tab. 4. Click theAdvancedbutton.5. Click the S3Display Modestab. The screenshown at the rightappears.6. Setting by your demand.7. Then you cancycle the videooutput by pressing the Fn + F5 keys.These options are described below.Single You can choose which device to apply as the Primary display.In Single mode, the video display hot key 31
ENGLISHChapter 2 — Getting Startedcombination is available—you can cycle the video output by pressing the Fn + F5 keys. Mirror In Mirror mode, the video display hot key combination is available—you can cycle the video output by pressing the Fn + F5 keys. If the external CRT is connected, the display on the LCD and the CRT is the same.Tip: To ensure trouble-free video output, the first time you use an external monitor, change the output in the Display Properties dialog box. After successfully switching modes, you may use the video function keys.Note: Light or dark dots may appear on the LCD due to technical limitations of LCD manufacturing. This will not effect normal operation of the LCD.Communication ComponentsThis system provides powerful communication functions, including built-in Fax/Modem and PCMCIA card slot.Fax/ModemA phone jack on the back side of the computer allows you to connect to the 32
ENGLISHGetting Started — Communication ComponentsInternet to send and receive data. When used with fax software, it can be used as a fax. When using this function, first plug the phone cord into the jack.Attention:When using the data communications function, please do not plug thephone cord into the ISDN or PBX jack to avoid an electrical surge thatwill cause the MDC module to burnAnti-electromagnetic wave clipTo eliminate electromagnetic waves, it is strongly recommended that you thread the left-side USB cable, LAN cable & phone cord through the clip provided as shown below when using USB peripherals, fax/modem jack orconnecting to a phone line.1. IEEE-1394 Port 2. Audio-out jack for external speakers or headphones33
ENGLISHChapter 2 — Getting Started3. S-VideoInformation about the Wireless LAN button Wireless LAN button Even when a Wireless LAN module hasnot been built-in to your computer, the Wireless LAN indicator lights and remains active when you turn on the Wireless LAN button near the powerbutton of your computer.If Wireless LAN module has been built-in, your notebook will search for the device and will display an icon on the Windows task bar.34
ENGLISHGetting Started — Information about the Wireless LAN button Note: If your Notebook does not include a built-in Wireless LAN module, please turn off the Wireless LAN button. If turned on, the indicator lights and remains active even if no wireless LAN is present.Built-in Wireless Local Area NetworkThe built-in Wireless Local Area Network (WLAN) interface card canprovide a quick access without using cables for the connection to the network equipments. The interface card adopts the IEEE 802.11 protocol and uses the 2.4 GHz ISM electric wave frequency band as the transmission interface to set up the communications between the hostcomputer and other computers.The way of processing communications through the WLAN interface card is the same as that through Ethernet interface card. The “Configuration Tool”is a Window application program. If users have a computer equipped with the WLAN interface card, then users can use it to set up the interface card and show the current configuration and status.Note: Contact your distributor for the information of upgrading thewireless local area network.DGT Warning Article 14 Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.Article 17 The application of low power frequency electric machineries shall not affect the navigation safety nor interfere a legal communication, if an interference is found, the service will be suspended until improvement is made and the interference no longer exists. The foregoing legal communication refers to the wireless telecommunication operated according to the telecommunications laws and regulations. The low power frequency electric machinery 35
ENGLISHChapter 2 — Getting Startedshould be able to tolerate the interference of the electric wave radiation electric machineries and equipments for legal communications or industrial and scientific applications.IMPORTANT NOTE (CO-LOCATION)FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. Thisdevice and its antenna must not be co-located or operating in conjunctionwith any other antenna or transmitter.Safety InformationIn order to maintain compliance with the FCC RF exposure guidelines, this equipment shouldbe installed and operated with minimum distance 20cm between the radiator and your body.Use only with supplied antenna.Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations.36
ENGLISHCChhaapptteerr33MMaakkiinnggCCoonnnneeccttiioonnss
ENGLISHChapter 3 — Making ConnectionsMaking Connections Your computer is equipped with a full array of ports and connectors,including standard input/output (I/O) ports for quickly and easily addingperipheral devices such as printers, keyboards, and mice. Refer todocumentation included with individual devices for details onconnecting these devices to your computer. Along with the standardports found on most computers, your computer also includes IEEE1394 ports, modem and LAN ports, offering advanced communicationstechnology.Back Side Connectors 1. VGA Out (External Video) Port The 15-pin VGA port can be used to connect your computer to an external monitor. (See the Graphics System in chapter 2 for moreinformation).2. IEEE-1394 Port The IEEE 1394 port is able to transfer large amounts of data at high speed.  Because of this ability, the IEEE 1394 port is often used withmultimedia devices, such as video cameras. However, a variety of devices that support the IEEE 1394 standard can be connected to thisport.3. USB (Universal Serial Bus) Ports The Universal Serial Bus (USB) is the latest standard for attachingmonitors, input devices, scanners, and other devices to a PC. USBdevices can be chained together on a single cable.38
ENGLISHMaking Connections — Back Side Connectors4. Fax/modem RJ-11 Jack The fax/modem can transmit data using the 56 Kbps V.90 protocol,and send and receive faxes at 14.4 Kbps. In some countries, localregulations may not permit the use of the fax/modem designed for this system. In this case, you may use a PCMCIA modem.5. Fax/modem RJ-11 Jack The fax/modem can transmit data using the 56 Kbps V.90 protocol,and send and receive faxes at 14.4 Kbps. In some countries, localregulations may not permit the use of the fax/modem designed for this system. In this case, you may use a PCMCIA modem.6. DC-in Jack Connect the DC power cable from the AC adapter to this jack. 7. S-Video Port S-Video technology provides sharper video image on a video or television device than traditional TV-out connections, provided your video display device supports S-Video output.8. Kensington Lock Your computer includes a Kensington lock hole to be used with astandard Kensington lock. You can connect the notebook to a largeobject with the Kensington lock to prevent theft of your notebook. See the documentation that comes with your Kensington lock for moreinformation.Warning: Plug your modem into an analog telephone jack only. Most homes use analog lines. Do not use digital lines, such as the PBX and ISDN systems found in many offices. Digital lines may damage your modem.39
ENGLISHChapter 3 — Making ConnectionsRight Side Connectors 1 2 1. PCMCIA Slot2. 4 in 1 memory slot Support MS/SD/MMC/SM 4kinds of memory cards.Front Side Connectors    1. Audio-out Jack Connect a stereo headset or external speakers to this jack to listen tomultimedia.2. Microphone-in Jack Connect a microphone this jack to record audio. 40
ENGLISHCChhaapptteerr44SSyysstteemmSSooffttwwaarree
ENGLISHChapter 4 — System SoftwareSystem SoftwareSoftware List Operating SystemYour hard drive already contains all the software you need to operatethe computer.Audio and Video DriversThese utility programs and drivers are included for the PC Card drive, the sound system, and the graphics sub-system.DVD Player ApplicationThe DVD player application will let you watch DVD movies on your notebook (for DVD-ROM module only).42
ENGLISHSystem Software — System RecoverySystem RecoveryBefore you start Your system includes Recovery CD-ROMs. Follow the steps in theappropriate section below to reinstall the operating system, the system software, or add a new hard disk. xThe factory has pre-partitioned your system's hard disk, so you may directly install the system software; however, if you changea new hard disk, you must first partition it. xIf you reinstall your operating system, all of the dataoriginally on the hard disk will be overwritten. Beforereinstalling the operating system, carefully backup anyimportant data.xYour system is shipped with Recovery CD-ROMs. Before reinstalling, note the CD-ROM labels.Caution: When you re-install operating system by Recovery CD for Windows, we STRONGLY recommendconnecting the AC adapterΰ do NOT use battery alone αto avoid warning message.43
ENGLISHChapter 4 — System SoftwareRecovering Windows and Original Software If your Windows operating system is lost or damaged, use theRecovery CD (Windows).Enter BIOS setup.Set first boot device to “CD-ROM.” (See Chapter 6: BIOS Settings.)Put the Windows Recovery CD into the CD-ROM drive and reboot the computer. NOFollow the instructions in the sections below:xPartitioning the hard drivexRecovering WindowsxCreating a Suspend-to-Disk Partition (Windows 98SE only)xRecovering original softwareYES.Follow steps under Recovering Windows.Hard disk partitioned?44
ENGLISHSystem Software — System RecoveryPartitioning the Hard DriveHard drive is not partitioned.After completing disk partitioning, press ESC toexit fdisk.Press <Alt>, <Ctrl>, and <Del> to reboot yourcomputer.Follow steps under Recovering Windows.If you see the message: “Do you wish to enablelarge disk support (Y/N),” Select “Y.”On the first screen select “Create DOS partition orlogical DOS drive.”On the next screen select “Create Primary DOSpartition.”  This will create the largest possiblepartition as the C drive.At the A:\ prompt, type fdisk and press Enter. Note: If your computer is set to boot from the CD-ROM drive, “A” refers to your CD-ROM.When the Microsoft Windows startup menu appears, select (2) Go to MS-DOS PROMPT.Press Enter to repartition your hard disk. 45
ENGLISHChapter 4 — System SoftwareWindows XP Reinstallation Enter BIOS setup.Set first boot device to “CD-ROM.” (See Chapter 6: BIOS Settings.)Put the Recovery CD for Windows XP. Disc#1 into the CD-ROM drive and reboot the computer.Press <Alt>, <Ctrl>, and <Del> to reboot the computer. Enter theBIOS Setup Utility and select Boot priority. Reset the boot priority to either A: or C:When the Microsoft Windows XP. Menu appears, choose option 1:Recovery CD for Windows XP. When prompted, insert the Disc#2. It will take approximately fifteen minutes to complete theinstallation. Remove the CD-ROM from the drive when theinstallation is complete.While starting Windows, reenter the Windows information as prompted.46
ENGLISHCChhaapptteerr55PPoowweerrMMaannaaggeemmeenntt
ENGLISHPower Management Battery Calibration The first time you use a battery, you should calibrate it. The calibration process empties and charges the battery one time. This allows the Windows battery gauge to accurately monitor battery status. To calibrate a battery, follow these steps:1. Plug in the AC adapter. 2. Restart the computer and when the startup screen appears, press Del key to enter the BIOS Setup Utility. 3. In the BIOS Setup Utility, select Advance settings. , choose Battery learning, then press enter.Execute Battery Learning function?[OK]                     [Cancel]4. Press <OK> at the above Battery Auto Calibration dialog to begin the battery calibration..Battery Calibration will take from 4 to 8 hours, depending on howmuch power the battery may already contain.Note: For optimum performance, we recommend calibrating the battery again every three months. Each time you charge and discharge a battery, it loses a tiny part of its storage capacity, so that, over time, it will store less than its potential charge. Similarly, if you do not use the battery for a few days, it will slowly self-discharge, and when it is recharged, it will hold less than 100% of the potential charge.48
ENGLPower Management — Monitoring Battery PowerISH49Monitoring Battery Power There are two ways to monitor how much power the battery has left. 1. Click start/ControlPanel/Power Options; then click Power Meter.2. Moving the cursor to the battery icon on the taskbar is the simplest way to check on battery power status.If you do not see the battery icon, enable it in Start /Control Panel/Power Options. Choose the Advanced tab and click “Always show icon on the taskbar.” Low Battery Alarms How your computer responds to a low battery condition is set under Start/Control Panel/Power Options/Alarms.Two different power alarms can be enabled or disabled: the Low Battery Alarm, and the Critical Battery Alarm. Use the slidebar to setthe power level at which the alarms are activated. Click on the AlarmAction button to choose whether the alarm sounds, displays a message, or both.Warning: When battery power is low, the Notebook will display a warning on the screen. Take immediate action, such as saving files or connecting to the AC adapter, or data may be lost.When the computer alerts you that the battery is low, immediately do one of the following: xConnect the AC power adapter
ENGLISHxSave your work, turn off the computer and replace the discharged battery with a charged battery (See Changing the Battery below). Do not restart the computer until you have connected to an AC adapter, or replaced the discharged battery with a charged battery. Battery Charging When you use the AC adapter to connect your Notebook to a power outlet, the internal battery will automatically begin to recharge. While the battery is charging, the Battery Charge icon on the Indicator panel will be active. When the battery is fully charged, the Battery Chargeicon will turn off. If your computer is turned off or standby mode, a fully discharged battery will take about 3 hours to recharge.Note: A fully charged battery can run the Notebook for approximately 1.25hours. (Pentium-4 3.0GHz)Power Saving Modes Adjust the default power management settings in the Power Options/ Advanced dialog box in the Control panel. The Power OptionsProperties dialog box allows you to set different actions to take when the computer is left idle for a certain amount of time.Suspend ModeThere are several possible settings for suspend mode, which can beselected in the Power Management dialog box: You may have the notebook standby, suspend, or you can power off the computer altogether.Initiating Suspend ModeThere are four ways to initiate suspend mode. The settings can be adjusted in the Power Management dialog box: 50
ENGLISHPower Management — Power Saving TipsxThe computer will automatically enter suspend mode when not used for a set period of time.xSelecting the Stand by button in the Shut Down Windows dialog box.xClosing the screen cover (assuming no external monitor has been connected).xPressing the power button (if enabled in power settings).xPressing the suspend function key <Fn> + <F4>. Power Button Settings The function of the power button can be set to Shutdown or Standby inthe Power Management Properties dialog box in the Windows ControlPanel. However, holding the power button down for more than fourseconds will force a power off while operating under any situation, resulting in the loss of any unsaved information. Power Saving TipsxAvoid operating the fax/modem, or audio and video applications when using battery power. Operating a fax modem, video, or audio equipment increases the computer's power requirements.xDecreasing monitor brightness can also save power. Decrease brightness by pushing <Fn> + <F6>. Increase it by pushing <Fn> + <F7>.51
ENGLISHWhen to Replace the BatteryOver time, the battery's capacity gradually decreases. We recommend that you replace your battery when you notice that it begins to storesignificantly less charge. Changing the BatteryChange the main battery pack as follows:1. Turn off the computer.2. Close the screen cover and turn the computer over. 3. Slide the side battery latch (1) away from the battery. Continue to hold it until the battery is removed. 4. Push in the latch on the battery (2) while lifting the battery out of the compartment. Remove the battery. 5. Make sure the replacement battery is properly orientated. Slide back the side battery latch (1) then insert the battery into the battery compartment.Check that the latch locks back intoposition.52
ENGLISHPower Management — Heat ConsiderationsHeat Considerations The computer's processor has been specially designed to consumelittle power, and generates very little heat. However, working in a hotenvironment, or working for long periods may raise the temperature. Your computer takes the following steps to lower temperature: 1. The cooling fan will automatically turn on. You may feel air coming from a vent at the left side when this happens.2. If the temperature continues to rise, processor activity will be reduced. You may notice a slight loss of performance when this happens.53
ENGLISH54
ENGLISHCChhaapptteerr66UUssiinnggtthheeBBIIOOSSSSeettuuppUUttiilliittyy
ENGLISHChapter 6 — Using the BIOS Setup UtilityUsing the BIOS Setup UtilityYour notebook has a BIOS setup utility which allows you to configure important system settings, including settings for various optionalfunctions of the computer. This chapter explains how to use the BIOS setup utility. BIOS Setup MenuThe BIOS setup Utility allows you to configure your computer’s basicsettings. When you turn your computer on, the system reads thisinformation to initialize the hardware so that it can operate correctly.Use the BIOS setup utility to change your computer’s start-upconfiguration. For example, you can change the security and powermanagement routines of your system.Starting the BIOS Setup Utility You can only enter the BIOS setup utility as the computer is booting, that is between the time you turn on the computer and before theWindows interface appears.  If your computer is already on, shut downyour computer completely (power off) and restart it and then press theDel key to enter the setup utility. 60
ENGLISHUsing the BIOS Setup Utility — Navigating and Entering Information in BIOS Navigating and Entering Information in BIOS Use the following keys to move between fields and to enter information:Å Æ Select Screen ÇÈ!Push the up and down arrow keys to moveamong selections, then press Enter to make aselection.+  -  Change OptionTab Select Field F1 General Help F10 Save and Exit ESC Press Esc to exit any section. If you wish to exit the BIOS utilitywithout saving changes, goto the main menu, then press Esc.Users are allowed to enter new values to replace the default settingsin certain fields, and the rest fields are specified by system defaultparameters and cannot be modified by users. Reverse the attribute of the main options and press the Enter key to enter into thesubmenu. Press the Esc key to return to the previousconfiguration page.61
ENGLISHChapter 6 — Using the BIOS Setup UtilityThe Main MenuBIOS SETUP UTILITYMain Advanced   Boot   Security   ExitSystem Overview AMIBIOS Version   : RD.06 Processor Type  :Intel® Pentium® 4 CPU 3.00GHz  Speed :3000MHz  Count :1System Memory  Size  : 512MB System Time [19:14:50]System Date [Thu 01/01/2004]Use [ENTER] , [TAB] Or [SHIFT-TAB] toselect a field. Use [+] or [-] to Configure system Time ЧШ  Select Screen ХЦ  Select Item +-  Change Option Tab Select Field F1  General Help F10 Save and Exit ESC Exit V02.53 ©Copyright 1985-2002, American Megatrends , Inc. Figure 6-162
ENGLISHUsing the BIOS Setup Utility — Advanced MenuAdvanced MenuBIOS SETUP UTILITYMain Advanced   Boot   Security    Exit  Advanced Setting  Auto DIM function          [Enabled]  Legacy USB Support         [Auto]  USB 2.0 Controller Mode    [HiSpeed]  Battery Learning           [Enter]  Start FAN Learning         [Enter]  Power Button Mode          [On/Off]  DRAM Clock                 [By SPD]  DRAM Timing                [Auto By SPD]  DRAM BUS Selection         [Auto]  AGP 3.0 Mode               [8X]  AGP Fast Write             [Enabled]  Hyper Threading Technology [Enabled]  Select ScreenЧШ Select Item ХЦ+- Change Option F1  General Help F10 Save and Exit ESC Exit V02.53 ©Copyright 1985-2002, American Megatrends , Inc. Figure 6-263
ENGLISHChapter 6 — Using the BIOS Setup UtilityBoot menu BIOS SETUP UTILITY Main   Advanced Boot   Security   Exit Boot Settings 1st Boot Device  [CDROM: SM-QSI DVD-R]  2nd Boot Device [HDD:PM-FUJITSU MHT2040AT]3rd Boot Device  [Network:PXE 2.33]Specifies the boot sequence from the available devices. A device enclosed in Parenthesis has beendisabled in the corresponding type menu. SeleЧШ ct Screen  Select ItemХЦ+- Change Option F1  General Help F10 Save and Exit ESC Exit      V02.53 ©Copyright 1985-2002, American Megatrends , Inc. Figure 6-364
ENGLISHUsing the BIOS Setup Utility — Security menuSecurity menuBIOS SETUP UTILITY Main   Advanced   Boot Security   Exit  Security Settings  Supervisor Password : Not Installed User Password       : Not InstalledChange Supervisor Password  Change User Password Install or Change thepassword. Select ScreenЧШ Select ItemХЦEnter Change F1  General Help F10 Save and Exit ESC Exit      V02.53 ©Copyright 1985-2002, American Megatrends , Inc. Figure 6-465
ENGLISHChapter 6 — Using the BIOS Setup UtilityExit menu BIOS SETUP UTILITY Main   Advanced   Boot   Security ExitExit Options Save Changes and Exit Discard changes and Exit  Discard Changes  Load Optimal Defaults  Load Failsafe Defaults Exit system setupafter saving the changes. F10 key can be usedfor this operation.  Select ScreenЧШ Select ItemХЦEnter Go To Sub Screen F1  General Help F10 Save and Exit ESC Exit      V02.53 ©Copyright 1985-2002, American Megatrends, Inc. 66
ENGLISHUsing the BIOS Setup Utility — Change User PasswordChange User Password With a User password, you can enter the Setup Utility and change or remove the User password, but you cannot enter the Setup Utility and change or remove the Supervisor password, nor enable disketteaccess if it has been disabled.Change Supervisor PasswordA supervisor password must be set before a lower-level userpassword can be set. After selecting Change Supervisor Password,press Enter. You will be prompted for the new password, and thenagain to verify it. Type in 6 or fewer keystrokes. If you make an error,press Esc to start over.Resetting the CMOS to Default Settings The main page provides the system parameters for you to reset theCMOS to default settings. After you enter this page, select the LoadOptimal Defaults:Load Optimal Defaults? [OK]       [Cancel] Select [OK] to reset the CMOS to default settings.Exiting and Saving  Save Settings and ExitSelect this option to save changes to the fieldvalues, and restart the computer using the newvalues. (Pressing F10 from any of the menuscreens also allows you to save settings and exit.) Exit Without Saving Select this option to discard any changes you havemade to the field values, and restart the computerusing the old values.67
ENGLISHChapter 6 — Using the BIOS Setup Utility68
ENGLISHAAppppeennddiixxAAFFrreeqquueennttllyyAAsskkeeddQQuueessttiioonnss
ENGLISHAppendix A — Frequently Asked QuestionsFrequently Asked QuestionsQ: My screen seems to time out too quickly. I have to constantlyhit a key or move the mouse in order to bring it back. How canI adjust the screen time-out?A: This is part of Windows Power Management. Access PowerManagement by clicking on Start / Settings / Control Panel /Power Management. Adjust the display time-out by selecting atime next to the Turn off monitor option. You may also selectdifferent time-out values for adapter and battery power states. Q: I've heard that cleaning up and rearranging files on the harddrive will improve the startup speed of my programs. How do I do this? A: Hard disk maintenance can improve the startup speed of programs.This maintenance includes deleting unnecessary files, anddefragmenting, which rearranges data into more efficient groupings.Windows includes utilities for performing these maintenance tasks. Run Disk Cleanup to remove unnecessary files, and Disk Defragmenter to defragment the hard drive. For more information,refer to Windows documentation.Q: The internal fax/modem dial tone sound is too low. How can I increase the volume?A: There are two methods to adjust the volume of the internalfax/modem dial tone: Method 1: Method 2:  Use the volume control button on the front of the computer.Q: What kind of external microphone can I use with my notebookcomputer?A: You will need to use a self-amplifying microphone.70To Start/ Control Panel / Telphone & Modem / option / Modem / Properties / Modem's control Panel. ( Then do the adjustment to adjust  dailing volume of internal fax/ Modem.
ENGLISHAppendix A — Frequently Asked QuestionsQ: There is feedback noise coming from my speakers. What can Ido?A: Double click on the Speaker icon on the task bar. Then, underMicrophone Balance, check the Mute box.Q: Because of a software problem, I was unable to shut downpower normally. I pressed the power button to force a poweroff, but it didn't work. How can I force a power off?A: Make sure you press the power button for at least 4 seconds.Normally, this will force a power off. If this does not work, you can shut down the computer by inserting a needle into the reset buttonpinhole. (The reset button locate on the computer bottom side.)Q: Why can’t I charge the battery of my portable computer after it was out of use for some time?A: After portable computers have not been used for a long time (morethan one month), the batteries will go into the low voltageprotection mode due to data back-ups and natural electricaldischarge. At that point, restoring normal voltage will require slowcharging over a period of several hours. Calibration can beperformed after the battery has returned to a normal condition.Q:   My computer alerts “CMOS Battery Low”, what can I do? A:  If you keep your computer in no power situation (unplug the computer from the power outlet and remove battery at the same) over 45 days, your data in CMOS will be lost.    Please reconfigure your CMOS by following steps:1. Press F1 to enter the BIOS setup utility. 2. Select “Load Optional Defaults?”. When you see thefollowing prompt, choose <OK> and then press <Enter>.Load Optional Defaults ? [OK]  [Cancel]71
ENGLISHAppendix A — Frequently Asked Questions3. Select “Save Changes and Exit”. When you see the following prompt, choose <OK> and then press <Enter> to restart your computer.Save configuration changes and exit setup?[OK] [Cancel]72
ENGLISHAAppppeennddiixxBBSSttaatteemmeennttss
ENGLISHAppendix B — StatementsStatementsFederal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and the receiver.3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help.Shielded interconnect cables and shielded AC power cable must be employed with this equipment to insure compliance with the pertinentRF emission limits governing this device. Changes or modifications not expressly approved by the system's manufacturer could void the user's authority to operate the equipment.Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions:xThis device may not cause harmful interferencexThis device must accept any interference received, includinginterference that may cause undesired operation.74Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
ENGLISHAppendix B — StatementsAbout The ModemThis equipment complies with Part 68 of FCC rules. On the bottom of this equipment is a label that contains, among other information, theFCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company.The modem jack of this equipment complies with Sub-part F of Part 68of FCC rules.The REN is used to determine the quantity of devices that may beconnected to the telephone line. Excessive RENs on the telephoneline may result in the devices not ringing in response to an incomingcall. In most, but not all areas, the sum of the RENs should not exceedfive (5.0). To be certain of the number of devices that may beconnected to the line, as determined by the total RENs contact thetelephone company to determine the maximum REN for the calling areas.If the terminal equipment causes harm to the telephone network, thetelephone company will notify you in advance that temporarydiscontinuance of service may be required. However, if advance noticeisn't practical, the telephone company will notify the customer as soonas possible. Also, you will be advised of your right to file a compliantwith the FCC if you believe it necessary.The telephone company may mark changes in its facilities, equipment,operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provideadvance notice in order for you to make the necessary modifications in order to maintain uninterrupted service.If trouble is experienced with this equipment, please contact the manufacturer for repair and (or) warranty information. If the trouble is causing harm to the telephone network, the telephone company mayrequest you remove the equipment from the network until the problemis resolved. The equipment cannot be used on public coin service provided by thetelephone company. Connection to Party Line Service is subject tostate tariffs. (Contact the state public utility commission, public servicecommission or corporation commission for information.)75
ENGLISHAppendix B — StatementsThe Telephone Consumer Protection Act of 1991 marks it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless such message clearlycontains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent andan identification of the business or other entity, or other individualsending the message and the telephone number of the sendingmachine or such business, other entity, or individual. (The telephonenumber provided may not be a 900 number or any other number forwhich charges exceed local or long-distance transmission charges.)To program this information, refer to the manual of the communicationsoftware.European NoticeProducts with the CE Marking comply with both the EMC Directive(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.Compliance with these directives implies conformity to the followingEuropean Norms:zEN 55022 ( CISPR 22 ) Radio Frequency InterferencezEN 55024 ( EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,EN61000-4-6, EN61000-4-8,EN61000-4-11, EN61000-3-2, EN61000-3-3 ) Generic Immunity StandardzEN 60950 ( IEC950 ) Product Safety R&TTE (CE) MANUAL REGULATORY REQUIREMENT(WLAN - IEEE 802.11b/g)802.11b/g Restrictions:zEuropean standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835GHz.zIn France, the equipment must be restricted to the 2.4465-2.4835GHzfrequency range and must be restricted to indoor use."76
!0984ENGLISHAppendix B — StatementsCE Declaration of ConformityIs herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low- voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed. The test was performed according to the following European standards. z  EN 300 328 V.1.4.1 (2003-04) z  EN 301 489-1 V.1.4.1 (2002-04) / EN 301 489-17 V.1.2.1 (2002-04)z EN 50371:2002 z EN 60950:2000 UL CAUTION To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.  IMPORTANT SAFETY INSTRUCTIONS   When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.Do not use the telephone to report a gas leak in the vicinity of the leak. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.  77
ENGLISHAppendix B — StatementsCanadian Department of Communications This class B digital apparatus meets all requirements of the CanadianInterference-causing Equipment Regulations.About the ModemThe Industry Canada label identifies certified equipment. Thiscertification means that the equipment meets certaintelecommunications network protective, operational and safety requirements. The department does not guarantee the equipment willoperate to the user's satisfaction.Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the localtelecommunications company.The equipment must also be installed using an acceptable method of connection. In some cases, the company's inside writing associatedwith a single line individual service may be extended by means of acertified connector assembly (telephone extension cord). Thecustomer should be aware that compliance with the above conditionsmay not prevent degradation of service in some situations.Repairs to certified equipment should be made by an authorizedCanadian maintenance facility designated by the supplier. Any repairsor alterations made by the user to this equipment, or equipmentmalfunctions, may give the telecommunications company cause torequest the user to disconnect the equipment.Users should ensure for their own protection that the electrical groundconnections of the power utility, telephone lines and internal metallicwater pipe system, if present, are connected together. This precautionmay be particularly important in rural areas.CAUTION: Users should not attempt to make such connectionsthemselves, but should contact the appropriate electricinspection authority, or electrician, as appropriate."The Load Number (LN) assigned to each terminal device denotes thepercentage of the total load to be connected to a telephone loop whichis used by the device. To prevent overloading, the termination on a loop may consist of any combination of devise subject only to therequirement that the total of the Load Numbers of all the devices doesnot exceed 100."78
ENGLISHAppendix B — StatementsBattery Disposal THIS PRODUCT CONTAINS A LITHIUM-ION OR NICKEL-METAL HYDRIDEBATTERY. IT MUST BE DISPOSED OF PROPERLY. CONTACT LOCALENVIRONMENTAL AGENCIES FOR INFORMATION ON RECYCLING ANDDISPOSAL PLANS IN YOUR AREA. CAUTION FOR ADAPTERTHIS NOTEBOOK COMPUTER IS FOR USE WITH MODEL NO.LSE0226A20160BATTERY CAUTIONDANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BYTHE MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THEMANUFACTURER'S INSTRUCTIONS.CLASS 1 LASER PRODUCT LASERSCHUTZKLASSE 1 PRODUKT TO EN60825 CAUTION: THIS APPLIANCE CONTAINS A LASER SYSTEM AND IS CLASSIFIED AS A "CLASS 1 LASER PRODUCT.” TO USE THIS MODEL PROPERLY, READ THE INSTRUCTION MANUALCAREFULLY AND KEEP THIS MANUAL FOR FUTUREREFERENCE. IN CASE OF ANY TROUBLE WITH THIS MODEL,PLEASE CONTACT YOUR NEAREST "AUTHORIZED SERVICE STATION.” TO PREVENT DIRECT EXPOSURE TO THE LASER BEAM, DO NOT TRY TO OPEN THIS ENCLOSURE.79

Navigation menu