Twinhead T7M Tablet PC User Manual T7MD1 User s Manual 0325
Twinhead International Corporation Tablet PC T7MD1 User s Manual 0325
Twinhead >
Contents
- 1. User manual T7MD1 rev
- 2. User manual T7MK1 rev
- 3. User manual T7ML1 rev
User manual T7MD1 rev
![26 Using Software Digitizer Calibration <For Selected Model> The touch screen is a thin membrane on the top of the LCD that reth-hsponds to mechanical pressure on the screen’s surface. The cursor on the screen is controlled by the stylus. If you notice the stylus tip touch-point not matching up with the cursor, you can recalibrate the touch screen. Calibrating the Digitizer 1. Click the Windows® Start button > Control Panel > Switch to Classic View > Pen Tablet Properties > Calibrate. 2. Under the Setting tab, click on the [Calibrate…] button to activate the calibration screen. 3. Hold the pen and position your head as you normally do when working with the tablet. 4. Use the pen tip to click on the center of the crosshairs. The wheel moves to another location on-screen. 5. Click [OK] to accept the calibration.](https://usermanual.wiki/Twinhead/T7M.User-manual-T7MD1-rev/User-Guide-1278071-Page-29.png)
![27 Calibrating the Touch Screen 1. Click the Windows® Start button > Control Panel > Switch to Classic View > Touch Settings. 2. Under the calibration tab, click on the [Calibrate…] button to activate the calibration screen. 3. Hold the pen and position your head as you normally do when working with the tablet. 4. Use the pen tip to click on the center of the crosshairs. The wheel moves to another location on-screen. 5. Test the alignment by positioning the pen at a few different points on the display. Click [Finished] to accept the calibration. Click [Try Again] to recalibrate. 6. Be sure to read the directions in the calibration screen for detailed instructions and additional options.](https://usermanual.wiki/Twinhead/T7M.User-manual-T7MD1-rev/User-Guide-1278071-Page-30.png)
