Two Loons SH02 2.4 GHz Wireless Camera User Manual 132LC OM

Download:
Mirror Download [FCC.gov]
Document ID	729621
Application ID	0ezIvc51zth/LaupHU7BNg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	85.36kB (1067030 bits)
Date Submitted	2006-11-17 00:00:00
Date Available	2006-11-20 00:00:00
Creation Date	2006-08-14 12:04:49
Producing Software	Corel PDF Engine Version 1.0.0.525
Document Lastmod	0000-00-00 00:00:00
Document Title	132LC_OM
Document Creator	CorelDRAW 12.0 版
Document Author:	aee

English
Swift Hitch
TM
User's Manual
Portable Wireless Camera System
with Infrared Night Vision
Model: SH01
Please read this manual carefully and thoroughly before any attempt to
install and operate this product and retain it for your future reference.
TABLE OF CONTENTS
INTRODUCTION
Notice
Approval Information
Warranty
Restrictions
Maintenance
PRODUCT
Package Contents
Feature Locations
FIRST TIME USAGE
Charging the Camera and Receiver
Using the Camera
Night Vision
SPECIFICATIONS
TROUBLESHOOTING
EU Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling
advice.
1~3
4~5
6~8
6~7
7~8
10
INTRODUCTION
Thank you for your interest and support in our product and purchasing
this wireless camera kit. This product works at ISM-2.4GHz frequency
band, which could be legally used worldwide without permission. We
feel confident that you will be pleased with the quality and features of
this product. The camera features one CMOS image sensor and a
transmitting module to capture the image and transmit them wirelessly.
The receiver features a receiving module to receive and display the
camera image on a color (LCD) - liquid crystal display.
Notice
Notice: This product may cause interferences with other wireless
equipment that operates at 2.4GHz ISM band. Please turn off one of
the equipments to eliminate the interference.
Product Assurance: This camera will emit electromagnetic wave,
just like other wireless products. But its transmitting power is less than
other wireless products such as mobile phones. The 2.4GHz wireless
camera meets wireless frequency security standards and recommended
indexes while working. These standards and indexes are certificated
by academic organization and represent the cogitative research of the
scientific workers who continuously explore and annotate the involved
fields. So we believe that our products are safe for customers.
Warranty
This product has a one year limited warranty with an affective date
that begins the date of purchase. Refer to the troubleshooting guide at
the end of this manual for help. Contact the phone number provided in
that section for any additional support. Please retain proof of purchase
receipt for verification. Any attempted
1 disassembly of the product will
void the warranty. Do not return defective product to the retailer.
Approval Information
All our products meet the requirements of approval FCC , and are
granted the FCC certification. They are authorized to bear FCC mark.
FCC
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation Changes and
modification not expressly approved by the manufacturer or registrant
of this equipment can void your authority to operate this equipment
under Federal Communications Commissions rules.
Restrictions
1. DO NOT use this product to violate one's privacy. Monitoring one's
activities without consent is illegal and this product is not designed
and manufactured for such purpose;
2. DO NOT put this product near any medical equipment. Radio
waves might potentially cause breakdown of electrical medical
equipment. So this product should be placed at least 1 foot away
from any heart pacemaker. Radio waves might potentially
influence heart pacemaker and lead to respiratory disturbance;
3. DO NOT use this product for any illegal activities. We shall not be
responsible for any consequences of illegal acts committed by the
user.
Maintenance
1.
2.
3.
4.
Do not shake or strike the product;
Keep it dry and dustless and avoid exposing it to direct sunlight;
Do not place product near any magnetic objects;
Avoid putting the product in places where the constantly changed
temperature or humidity occurs;
5. Keep product away from heat sources such as electric heater;
6. Do not use the camera near aggressive chemicals;
7. Do not use this camera near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near
a swimming pool and the like;
8. Do not use the camera in the places which are enclosed by metal.
The surrounding metal like lifter, cabin, may shield the
electromagnetic wave, and result in failure of signal reception;
9. Please obey the local government's environment protection policy;
10. Please turn off the power when left unused;
11. Do not disassemble or repair the camera or receiver; doing so might
cause damages to the product. And also VOID THE WARRANTY.
PRODUCT
Package Contents
This package comes with the following items. Please check whether
they are all included in the packaging box, if one or some is missing,
contact the retailer for replacement.
① 2.4GHz Wireless Camera×1
② 2.4GHz Wireless Receiver×1
③ Lithium Battery for Receiver ×1
④ "Y" shaped Charging cable for
①
②
③
④
⑤
⑥
camera & receiver ×1
⑤ Carrying Bag for camera ×1
⑥ Carrying Bag for Receiver ×1
⑦ User's Manual ×1
⑦
Feature Locations
1. Camera
Antenna
Power Jack
LED
Weatherproof
cover
Infrared
Lights
Power ON/OFF
Lens
Magnetic
stand
2. Receiver
LCD
Power ON/OFF
Battery Cover
Charge Socket
LED
Charge Socket
(available only by base charging,
and the base is optional)
FIRST TIME USAGE
Charging the Camera and Receiver
1. Load a Li-battery to the battery compartment with its polarities matched.
Note: Make the contacts contacting first and then put the other end of the battery
in the compartment.
2. Connect the camera/receiver with auto cigarette lighter by the "Y"
shaped charging cable. Your camera and receiver are being
charged. A full charge will take about 2 hours for camera and 2.5
hours for receiver.
Camera
Auto cigarette lighter
Receiver
Note: For camera, you need to remove the cover before charging.
3. The camera/receiver can work during charging. Press the Power ON
/OFF button to power on the camera/receiver, then you can use it.
Receiver
Camera
Notes for camera:
If the battery is exhausted, please recharge it with the charging cable.
Cover the back with weatherproof cover in rainy day if necessary.
CAMERA LED INDICATOR
Red on
Off
Green on
Yellow on
STATUS
Charging when Power off
Power off (disconnect with cigarette lighter)/Finish Charging
Power on
Charging when Power on
Notes for receiver:
A full charge will take about 2.5 hours, which can power the receiver for about
180 minutes continuously.
You are recommended to have the battery fully charged before its first
installation to optimize its life.
Do not burn or disassemble the Li-battery.
Do not short-circuit the battery as it may cause fire or electric shock.
RECEIVER LED INDICATOR
Red on
Off
Green on
Yellow on
Flash green
STATUS
Charging when Power off
Power off (disconnect with cigarette lighter)/ Finish Charging
Power on
Charging when Power on
Low battery
Using the Camera
1. Before using, make sure the camera is full charged. Press the Power
ON/OFF button to power on your camera.
2. Mount the Magnetic Camera on your tailgate. Then adjust it to a
suitable angle from your receiver.
3. View yourself backing up on the display. Hitch your ride.
Night Vision
The built-in Infra-red lights in camera provide night vision for low light
conditions. The Infra-red lights will be automatically activated at night.
The picture will turn to Black & White (monochrome) in Night Vision
status.
Built-in IR lights for about
15ft Night Vision Range
SPECIFICATIONS
CAMERA
ITEMS
Imaging Sensor
CMOS Total Pixels
View Angle
Minimum Illumination
Transmission Frequency
Transmission Power
Value
CMOS
628 × 582(PAL); 510 × 492(NTSC)
55o
5Lux/F1.2 & 0Lux (IR ON)
ISM 2,400MHz~2,483MHz
10mW/CE
Modulation Type
Bandwidth
Power Supply
Battery Type
Consumption Current
Charge Time
FM
18MHz
+12V DC
Lithium Battery
180mA & 230mA (IR ON)
2h
4h(IR OFF)
2h(IR ON)
Working Time
Unobstructed Effective Range
Night Vision Range
100m
5m
Dimensions(W × D × H)
(Excluding bracket)
28 × 90 × 28(mm)
110g
RECEIVER
Weight
2.5" TFT
960 × 240
ISM 2,400MHz~2,483MHz
LCD
LCD Resolution
Receiving Frequency
Intermediate Frequency
Demodulation Type
Receiving Sensitivity
Power Supply
Consumption Current
Dimensions(W × D × H)
Weight
480MHz
FM
≤ -80dBm
+12V DC
240mA
80 × 38 × 130(mm)
250g
-10 oC~+50 oC/+14 oF~+122 oF
-30 oC~+65 oC/-22 oF~+149 oF
85%RH
Operating Temperature
Storage Temperature
Operating Humidity
* Actual transmission range may vary according to weather, location, interference or building
construction.
* All the specifications are subject to minor change without prior notice.
TROUBLESHOOTING
When you experience the operation problems, please check and try
the following yourself before claiming that it is the defective product
or consulting the experienced technician.
Abnormal Phenomena
Possible Reasons/Solutions
Check whether the camera/receiver
is powered on.
No image
Adjust the lens of camera.
Blur image
1. Interfered with other devices;
2. Check the distance & blocks.
Ghost image
Questions?? call XXX-XXX-XXXX

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-701
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 1.0.0.525
Mod Date--Text                  : 
Format                          : application/pdf
Creator                         : aee
Title                           : 132LC_OM
Creator Tool                    : CorelDRAW 12.0 版
Modify Date                     : 2006:11:13 10:22:24+08:00
Metadata Date                   : 2006:11:13 10:22:24+08:00
Document ID                     : uuid:882b0a13-b8a9-44bd-a222-ab923b06fd63
Instance ID                     : uuid:e4e0d26d-e5c5-4db9-a52a-9041d47a9c12
Page Count                      : 12
Create Date                     : D:20060814120449
Author                          : aee

EXIF Metadata provided by EXIF.tools