Two Technologies JETTXL Hand Held Computer with Bluetooth User Manual JETT XL User s Guide

Download:
Mirror Download [FCC.gov]
Document ID	647961
Application ID	E0wMHucLYwYXd6OP9w/1LQ==
Document Description	Users Manual Revision D
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	99.5kB (1243754 bits)
Date Submitted	2006-04-17 00:00:00
Date Available	2006-04-17 00:00:00
Creation Date	2006-04-05 11:46:47
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2006-04-05 11:55:29
Document Title	JETT•XL User's Guide
Document Creator	Acrobat PDFMaker 6.0 for Word
Document Author:	Vince Rudi

USER’S GUIDE
TM
Two Technologies, Inc.
TM
MAN0359, REV. B
II
JETT•XL USER'S GUIDE
Document Number: MAN0359, Rev. B
Date of Preliminary Release: February 13, 2006
Copyright © 1998 – 2006 Two Technologies, Inc.
All rights reserved.
Printed in the United States of America
COPYRIGHTS AND TRADEMARKS
Two Technologies is a trademark and JETT is a registered trademark of Two Technologies, Inc.
Microsoft, Windows CE 5.0, Windows NT, Windows 2000, Windows XP, Visual C++, eMbedded Visual
C++, Visual Basic and Visual Studio .NET 2003 are either trademarks or registered trademarks of the
Microsoft Corporation.
Other products or company names mentioned herein may be the trademarks or registered trademarks of
their respective companies.
REPRODUCTION RIGHTS
This manual contains proprietary information. Permission to reproduce or otherwise use portions of the
material presented herein is explicitly given to Two Technologies VARs incorporating the JETT•XL into
their products. Please note that this publication contains material that may not be appropriate for disclosure
to some end users and that Two Technologies assumes no responsibility for technical support burdens
incurred, or any other consequences of VAR documentation decisions.
CHANGES AND ADDENDUM
Since Two Technologies is continuously improving the functionality and quality of its products, certain
information may not be included at the time of release of the printed manual. When this occurs, changed
material may be provided as separate sheets included with this manual or separately in the form of a change
package.
CONTACT INFORMATION
Two Technologies Incorporated
419 Sargon Way, Horsham, PA 19044
Phone: 215.441.5305
Fax: 215.441.0423
Web: www.2T.com
To contact Two Technologies by e-mail:
•
Sales: sales@2T.com
•
Customer Service: customersupport@2T.com
•
Technical Support: techsupport@2T.com
III
WARRANTY INFORMATION
Seller warrants that the product specified in this agreement are free of defects in materials and
workmanship, and shall conform to the latest specifications published prior to Buyer’s acceptance of the
agreement for a period of two years.
Product specifications as defined supersede previous specifications and are complete. Any parameter that is
not specifically defined in the specifications is expressly excluded from the warranty. This warranty does
not apply to any product which have been subject to misuse, accident, alteration, or if the unit has been
serviced by anyone other than an authorized representative of Seller.
Seller’s sole obligation to Buyer for products failing to meet specifications shall be, at Seller’s discretion, to
repair or replace the non-conforming device.
After receiving a Return Authorization (RA) number and a mailing address from Seller, a defective unit
covered under this warranty may be returned freight prepaid. Any replacement or repaired product shall
carry only the unexpired term of the warranty plus any the period required for repair.
If Buyer has been expressly designated as an Original Equipment Manufacturer (OEM) by Seller, the
warranty period shall commence upon the earlier date of (i) delivery to Buyer’s first customer, or (ii) 180
days from the original date of shipment by Seller. In the events that products for which: (a) Buyer has title
and, (b) have never been used, and (c) have been in the Buyer’s possession for more than 180 days and, (d)
have an unaltered date code attached, may for an established fixed fee which will not exceed ten percent
(10%) of the original purchase price, have the date code updated by the Seller and thereby reestablish those
products with a new warranty.
THE FOREGOING WARRANTY AND REMEDIES ARE EXCLUSIVE AND ARE MADE EXPRESSLY IN
LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION
OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR MERCHANTABILITY AND
FITNESS FOR USE. TWO TECHNOLOGIES NEITHER ASSUMES NOR AUTHORIZES ANY OTHER
PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE,
INSTALLATION OR USE OF ITS PRODUCTS AND TWO TECHNOLOGIES MAKES NO WARRANTY
WHATSOEVER FOR PRODUCTS NOT MANUFACTURED BY TWO TECHNOLOGIES.
TWO TECHNOLOGIES SHALL NOT BE LIABLE FOR DAMAGES DUE TO DELAYS IN DELIVERIES OR
USE AND SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF
ANY KIND, WHETHER ARISING FROM CONTRACT, TORT OR NEGLIGENCE, INCLUDING, BUT NOT
LIMITED TO, LOSS OF PROFITS, LOSS OF GOODWILL, OVERHEAD OR OTHER LIKE DAMAGES.
To maintain your warranty and to avoid creating hazards, only qualified personnel should perform
authorized modifications to Two Technologies’ products. Two Technologies cannot assume responsibility
for any condition affecting the proper operation of this equipment that may result from unauthorized
modifications.
PRODUCT RETURNS
If, after inspection, you note any product damage or discrepancies, please contact us promptly within five
days of receipt. If the exterior of the package shows obvious signs of damage, please contact your carrier
directly.
All items returned to Two Technologies require a Return Material Authorization number (RMA). Please
contact Two Technologies’ Service department to request an RMA number.
IV
REGULATORY NOTICES (PENDING)
FCC PART 15 CLASS A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC ID: RYJJETTXL
Two Technologies Incorporated
419 Sargon Way, Horsham, PA 19044
Phone: 215.441.5305
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC SECTION 15.21
Changes or modifications to this unit not expressly approved by Two Technologies may void the user’s
authority to operate the equipment.
CANADIAN DEPARTMENT OF COMMUNICATIONS
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus
set out in the Radio Interference Regulations of the Canadian Department of Communications
Le present appareil numerique n’emet pas de bruits radioelectrique depassant les limites applicables aux
appareils numeriques de la class A prescrites dans le Reglement sur ie broullage radioelectrique edicte par
le ministere des Communications du Canada.
CENELEC
*Pending
EMI STANDARDS:
•
EN 55022:1998 (CISPR22), Class A
•
ETSI EN 300 330-2: 2001
EMC STANDARDS:
•
EN 55024: 1998
•
ETSI EN 301489-1: 2002, 301489-3: 2002
•
EN/IEC 61000-4-2, 61000-4-3, 61000-4-4
WARNINGS
Changes or modifications to this unit not expressly approved by the party responsible for regulatory
compliance could void the user's authority to operate the equipment.
ELECTROSTATIC DISCHARGE (ESD)
Electrostatic discharge (static electricity) can have unpredictable adverse effects on any electronic device.
Although the design of this product incorporates extensive ESD-related precautions, ESD can still cause
problems. It is good practice to discharge static by touching a grounded metal object before inserting cards
or connecting devices.
La descarga electrostática (electricidad estática) puede tener efectos nocivos imprevisibles en cualquier
dispositivo electrónico. Aunque el diseño de este producto incorpora precauciones ESD-relacionadas
extensas, la lata de ESD todavía causa problemas. Es buena práctica descargar parásitos atmosféricos
tocando un objeto puesto a tierra del metal antes de insertar tarjetas o de conectar los dispositivos.
La décharge électrostatique (l'électricité statique) peut avoir des effets nuisibles imprévisibles sur n'importe
quel dispositif électronique. Bien que la conception de ce produit incorpore des précautions ESD-connexes
étendues, le bidon d'ESD posent toujours des problèmes. Il est dans de bons habitudes de décharger la
charge statique en touchant un objet au sol en métal avant d'insérer des cartes ou relier des dispositifs.
Elektrostatische Entladung (statisch Elektrizität) kann unvorhersehbare schädliche Wirkungen auf jeder
elektronischen Vorrichtung haben. Obgleich das Design dieses Produktes umfangreiche ESD-in Verbindung
stehende Vorkehrungen enthält, verursachen ESD Dose noch Probleme. Es ist gutes üblich, Static zu
entladen, indem es einen geerdeten Metallgegenstand berührt, bevor es Karten einsetzt oder Vorrichtungen
anschließt.
SERVICING INFORMATION
When servicing the unit, the plug (JETT•connect cable) is the disconnect device. Simply unplug the unit
before servicing.
Al mantener la unidad, el enchufe (cable de JETT•connect) es el dispositivo de la desconexión. Desenchufe
simplemente la unidad antes de mantener.
En entretenant l'unité, la prise (câble de JETT•connect) est le dispositif de débranchement. Débranchez
simplement l'unité avant l'entretien.
Wenn er die Maßeinheit instandhält, ist der Stecker (JETT•connect Kabel) die Trennung Vorrichtung. Vor
der Wartung trennen Sie einfach die Maßeinheit.
BATTERY REPLACEMENT
CAUTION! There is a risk of explosion if you replace the NiMH battery with an incorrect type. Only use the
NiMH battery supplied with your unit or a replacement NiMH battery supplied, recommended, or
approved by Two Technologies, Inc.
PRECAUCIÓN! Hay un riesgo de la explosión si usted substituye la batería de NiMH por un tipo
incorrecto. Utilice solamente la batería de NiMH provista de su unidad o una batería de NiMH del
reemplazo provista, recomendada, o aprobada por Two Technologies, Inc.
ATTENTION! Il y a un risque d'explosion si vous remplacez la batterie de NiMH avec un type incorrect.
Utilisez seulement la batterie de NiMH fournie avec votre unité ou une batterie de NiMH de remplacement
fournie, recommandée, ou approuvée par Two Technologies, Inc.
VORSICHT! Bei Verwendung von NiMH Akkus, die nicht durch Two Technologies, Inc. geliefert,
empfohlen oder genehmigt wurden besteht Explosionsgefahr! Benutzen Sie daher nur solche NiMH
Akkus/Batterien, die mit dem Gerät geliefert wurden bzw. Ersatzakkus, die durch Two Technologies, Inc.
geliefert, empfohlen oder genehmigt wurden.
VI
BATTERY DISPOSAL
Dispose of batteries in a safe manner. The following are general guidelines for the safe use and disposal of
NiMH batteries:
•
Replace a defective NiMH battery immediately as it could damage the unit.
•
Do not throw the NiMH battery it in trash that is disposed of in landfills as it contains heavy
metals. Recycle or dispose the NiMH battery of it as required by local ordinances or regulations.
•
Do not disassemble, incinerate, short-circuit the NiMH battery or throw it into a fire. It can explode
and cause severe personal injury.
•
Excessive discharge damages a NiMH battery. Recharge the NiMH battery when your unit
indicates low battery power.
Disponga de las baterías de una manera segura. Los siguientes son pautas generales para el uso seguro y la
disposición de las baterías de NiMH:
•
Substituya una batería defectuosa de NiMH inmediatamente pues podría dañar la unidad.
•
No lance la batería de NiMH él en la basura que se dispone en terraplenes mientras que contiene
los metales pesados. Recicle o disponga la batería de NiMH de ella según los requisitos de
ordenanzas o de regulaciones locales.
•
No desmonte, no incinere, no cortocircuitos la batería de NiMH ni láncela en un fuego. Puede
estallar y causar daños corporales severos.
•
La descarga excesiva daña una batería de NiMH. Recargue la batería de NiMH cuando su unidad
indica energía de batería baja.
Débarassez-vous des batteries d'une façon sûre. Ce qui suit sont les orientations à l'utilisation sûre et à la
disposition des batteries de NiMH:
•
Remplacez une batterie défectueuse de NiMH immédiatement car elle pourrait endommager
l'unité.
•
Ne jetez pas la batterie de NiMH il dans le détritus qui est débarassé en remblais pendant qu'il
contient les métaux lourds. Réutilisez ou disposez la batterie de NiMH d'elle selon les exigences
des ordonnances ou des règlements locaux.
•
Ne démontez pas, n'incinérez pas, ne court-circuitez pas la batterie de NiMH ou ne la jetez pas
dans un feu. Il peut éclater et causer des blessures graves.
•
La décharge excessive endommage une batterie de NiMH. Rechargez la batterie de NiMH quand
votre unité indique la basse puissance de batterie.
Entledigen Sie sich Batterien in einer sicheren Weise. Die folgenden ist allgemeine Richtlinien für den
sicheren Gebrauch und die Beseitigung der NiMH Batterien:
•
Ersetzen Sie eine defekte NiMH Batterie sofort, da sie die Maßeinheit beschädigen könnte.
•
Werfen Sie nicht die NiMH Batterie es im Abfall, der in den Aufschüttungen entledigt wird,
während es Schwermetalle enthält. Bereiten Sie auf oder schaffen Sie die NiMH Batterie von ihr
wie von lokalen Befehlen oder Regelungen gefordert ab.
•
Bauen Sie nicht auseinander, äschern Sie ein, schließen Sie die NiMH Batterie kurz oder werfen Sie
sie in ein Feuer. Es kann strenge Personenschäden explodieren und verursachen.
•
Übermäßige Entladung beschädigt eine NiMH Batterie. Laden Sie die NiMH Batterie neu, wenn
Ihre Maßeinheit niedrige Batterieleistung anzeigt.
VII
CONTENTS
Chapter 1. OVERVIEW................................................................................................................... 1-1
About this Manual.................................................................................................................................................. 1-1
Related Documents ............................................................................................................................................ 1-1
About Two Technologies....................................................................................................................................... 1-1
About the JETT•XL ................................................................................................................................................ 1-1
JETT•XL Features............................................................................................................................................... 1-2
Chapter 2. COMPONENTS AND INDICATORS ..................................................................................... 2-1
Front Components .................................................................................................................................................. 2-1
Front Panel .......................................................................................................................................................... 2-2
Compact Flash Slot Cover ..................................................................................................................................... 2-2
Interface Connections............................................................................................................................................. 2-3
JETT•connect System ........................................................................................................................................ 2-3
DE-9 Connectors................................................................................................................................................. 2-3
6-Pin Modular Connector.................................................................................................................................. 2-4
Power Jack........................................................................................................................................................... 2-4
Power Supplies, Cables and Adapters............................................................................................................. 2-4
Chapter 3. OPERATION ................................................................................................................. 3-1
The Power/Suspend Switch.................................................................................................................................. 3-1
Power On............................................................................................................................................................. 3-1
Power Off ............................................................................................................................................................ 3-2
Suspend Mode .................................................................................................................................................... 3-2
Using the Rechargeable Battery ............................................................................................................................ 3-2
Charge/Low Battery Indicator ......................................................................................................................... 3-2
Charging the Unit............................................................................................................................................... 3-3
Replacing Batteries/Battery Pack..................................................................................................................... 3-4
Data Entry................................................................................................................................................................ 3-5
Keypads ............................................................................................................................................................... 3-5
Modifier Keys ..................................................................................................................................................... 3-6
Key Repeat .......................................................................................................................................................... 3-6
CE Keyboard ....................................................................................................................................................... 3-7
The Windows CE .NET Desktop .......................................................................................................................... 3-8
Desktop Functions.............................................................................................................................................. 3-8
The Taskbar......................................................................................................................................................... 3-8
Power Status Icons ............................................................................................................................................. 3-9
The Start Menu ................................................................................................................................................... 3-9
SystemCF Folder..................................................................................................................................................... 3-9
Using the Compact Flash Slot ............................................................................................................................. 3-10
Chapter 4. CONFIGURATION .......................................................................................................... 4-1
The Control Panel ................................................................................................................................................... 4-1
Power Management................................................................................................................................................ 4-2
Taskbar and Start Menu Settings.......................................................................................................................... 4-3
Saving Changes....................................................................................................................................................... 4-3
Chapter 5. MAKING CONNECTIONS ............................................................................................... 5-1
Creating an ActiveSync Connection..................................................................................................................... 5-1
Initial Communication....................................................................................................................................... 5-1
Subsequent Communication............................................................................................................................. 5-3
Making a Bluetooth Connection ........................................................................................................................... 5-4
Making a Wired Ethernet Network Connection................................................................................................. 5-8
Setting Up Identification for Remote Networks............................................................................................. 5-8
Connecting to a Mail Server .................................................................................................................................. 5-9
Chapter 6. TROUBLESHOOTING ....................................................................................................... 6-1
VIII
Appendix A. SPECIFICATIONS..................................................................................................... A-1
Appendix B. SIGNAL AND PIN ASSIGNMENTS ................................................................................B-1
JETT•connect Cables..............................................................................................................................................B-1
1210 Series Modular Interface Cables ..................................................................................................................B-2
Modular Cable Adapters...................................................................................................................................B-3
Null Modem Cable .................................................................................................................................................B-3
INDEX ............................................................................................................................................. I-1
LIST OF TABLES
Table 1-1: Connector Covers ...................................................................................................................................... 1-3
Table 2-1: Front Components and Indicators .......................................................................................................... 2-1
Table 2-2: Front Components and Indicators .......................................................................................................... 2-2
Table 2-3: Available Power Supplies, Cables and Adapters.................................................................................. 2-4
Table 3-1: Charge\Low Battery Indicator Functions.............................................................................................. 3-2
Table 3-2: Modifier Key Actions................................................................................................................................ 3-6
Table 3-3: Desktop Functions..................................................................................................................................... 3-8
Table 3-4: Power Status Icons .................................................................................................................................... 3-9
Table 4-1: Control Panel Functions ........................................................................................................................... 4-1
LIST OF FIGURES
Figure 2-1: Front Components................................................................................................................................... 2-1
Figure 2-2: Front Panel Components ........................................................................................................................ 2-2
Figure 2-3: Standard Compact Flash Slot Cover, Closed ....................................................................................... 2-2
Figure 2-4: Standard Compact Flash Slot Cover, Opened ..................................................................................... 2-2
Figure 2-5: Modified Compact Flash Slot Cover for Long Device Cards............................................................. 2-2
Figure 2-6: JETT•connect Interface Connector........................................................................................................ 2-3
Figure 2-7: DE-9 Male Interface Connector.............................................................................................................. 2-3
Figure 2-8: DE-9 Female Interface Connector.......................................................................................................... 2-3
Figure 2-9: 6-Pin Modular Interface Connector....................................................................................................... 2-4
Figure 2-10: Power Jack .............................................................................................................................................. 2-4
Figure 3-1: Power/Suspend Switch .......................................................................................................................... 3-1
Figure 3-2: Charge/Low Battery Indicator .............................................................................................................. 3-2
Figure 3-3: Using 91708, 91709, and14375 Cables ................................................................................................... 3-3
Figure 3-4: Using 1210 Series Cables......................................................................................................................... 3-3
Figure 3-5: Power Supply........................................................................................................................................... 3-3
Figure 3-6: Changing Batteries .................................................................................................................................. 3-4
Figure 3-7: Standard Keypad Layouts ...................................................................................................................... 3-5
Figure 3-8: 45-Keypad Multifunctional Key ............................................................................................................ 3-6
Figure 3-9: CE Keyboard ............................................................................................................................................ 3-7
Figure 3-10: Transcriber.............................................................................................................................................. 3-7
Figure 3-11: Windows CE .NET Desktop................................................................................................................. 3-8
Figure 3-12: Windows CE .NET Desktop Taskbar .................................................................................................. 3-8
Figure 3-13: Start Menu .............................................................................................................................................. 3-9
Figure 3-14: Using the Compact Flash Slot ............................................................................................................ 3-10
Figure A-1: Case Dimensions ...................................................................................................................................A-2
Figure B-1: 708 Cable (Male DE9) RS-232 Signal and Pin Assignments...............................................................B-1
Figure B-2: 91709 Cable (Female DE9) RS-232 Signal and Pin Assignments.......................................................B-2
Figure B-3: 1210 Series Modular Cable Signal and Pin Assignments...................................................................B-2
Figure B-4: CELAT-P Adapter...................................................................................................................................B-3
Figure B-5: DE-9 Female to DE-9 Female Null Modem Cable...............................................................................B-3
IX
CHAPTER 1
OVERVIEW
ABOUT THIS MANUAL
This manual describes the standard features and operation of the JETT•XL. Unless otherwise stated, the
operational characteristics described herein correspond to factory default configurations and settings as
shipped from Two Technologies. Wherever used herein, the term “JETT” applies to all JETT•XL models
(except as noted).
It is beyond the scope of this manual to provide operating system tutorials or information about commercial
or customized JETT application programs and connected equipment. This information should be available
in the manuals that accompany those products.
RELATED DOCUMENTS
•
JETT•XL Integration Guide
•
JETT•FUEL User’s Guide
•
JETT Latching Mount User's Guide
•
JETT•hangar Quad Cradle User's Guide
•
JETT•hangar Single Cradle User's Guide
•
Sync Commander User's Guide
ABOUT TWO TECHNOLOGIES
Two Technologies has been producing rugged hand held/panel mount terminals and computers since 1987.
By implementing state of the art design and manufacturing techniques, we revolutionized hand held
terminals and computers inside and out. Today, Two Technologies offers over a dozen cost-effective
solutions serving virtually every market worldwide.
ABOUT THE JETT•XL
With its modern, ergonomic appearance and design, the JETT•XL is the most recent addition to Two
Technologies' series of rugged hand held computers for industrial and commercial use. Its quick mount
connector system allows easy insertion and removal in cradle or vehicle mounts.
The JETT•XL comes standard with the Windows CE 5.0 operating system and an Intel PXA270 XScale
processor that operates up to 624 MHz. It also has integrated Bluetooth and a choice of RS-232, RS-485 and
RS-422 interfaces.
1-1
JETT•XL FEATURES
OPERATING SYSTEM
The JETT•XL uses Windows CE 5.0 as its operating system. You can develop applications quickly and easily
using the latest development tools and network connectivity from Microsoft, such as eMbedded Visual C++
4.O, Visual Studio .NET 2003 and ActiveSync 3.8.
RECHARGEABLE BATTERY PACK
The JETT•XL comes with a rechargeable Nickel Metal Hydride (NiMH) battery pack that can provide up to
twelve hours of operating time on a full charge (depending on power management and use) .
The NiMH technology used in the JETT•XL has exceptional charge life without the “charge memory”
characteristic of conventional nickel cadmium batteries. Partially discharged batteries or extended periods
with the charger left connected will not adversely affect battery life or performance. The JETT•XL can also
run on six AA Alkaline batteries.
PROCESSOR
The JETT•XL utilizes an Intel PXA270 processor designed specifically for high-performance, low power,
portable, handheld devices. It incorporates Intel XScale technology with on-the-fly voltage, frequency
scaling and sophisticated power management. It also complies with the ARM Architecture V5TE instruction
set
MEMORY AND MASS STORAGE
The JETT•XL comes standard with 128MB of SDRAM (approximately 30MB used for the operating system)
and 512m MB of internal compact flash memory. An additional 256 MB of SDRAM is optionally available.
Internal compact flash memory is optionally expandable to 2 GB.
For removable data storage or I/O cards, the JETT•XL is equipped with a Compact Flash (CF) slot.
DISPLAYS
The JETT•XL features a supertwist nematic liquid crystal 320 x 240 QVGA-TFT color sunlight readable
display with options for a touch screen and LED backlight.
KEYPADS
Standard keypad configurations for the JETT•XL include 15-key, 30-key, and 45-key elastomeric keypads
and a 45-key membrane keypad. All standard keypad configurations have an option for LED backlighting.
INDICATORS
The JETT•XL has five programmable LED indicators that can provide a number of useful functions
including the state of keypad modifier keys. An additional LED indicates charge and low battery status
INTERFACE CAPABILITIES
The JETT•XL comes standard with one JETT•connect serial port with choice of full RS-232 or a choice of
two of the following: short RS-232 (2), short RS-422 or short RS-485. A modular serial port with a choice of
short RS-232 or Charge Jack is optionally available
WIRELESS CONNECTIVITY
The JETT•XL includes an integrated Bluetooth Class 2 wireless technologies that allows you to connect to
other Bluetooth devices at distances up to 30 feet and perform functions such as file synchronization via
ActiveSync, OBEX file transfers or printing to Bluetooth enabled printers.
DURABILITY
The case is made of General Electric Xenoy, one of the most durable chemical resistant materials available
today.
1-2
OVERVIEW
INGRESS PROTECTION
The JETT•XL is completely dust-tight and can withstand exposure to jets of water and has an IP (Ingress
Protection) rating of 65 as defined by IEC standard 529.
Although not required to maintain an IP65 rating, Two Technologies offers connector covers that help
prevent electrolysis (corrosion that occurs due to a chemical reaction between water and a connector that
conducts electricity). For maximum protection, you should replace each plug every six months. Please note,
that the product warranty does not cover JETTs that fail due to electrolysis.
Table 1-1: Connector Covers
Illustration
Part Number
Description
14555
DE-9 Male Metal Plug
14556
DE-9 Female Metal Plug
14489
Power Plug
14492
JETT•connect Plug
Note: Illustrations are representative and not to scale.
OVERVIEW
1-3
CHAPTER 2
COMPONENTS AND INDICATORS
FRONT COMPONENTS
This section describes the components found on the font of the JETT.
Figure 2-1: Front Components
Table 2-1: Front Components and Indicators
Item
Component
Description
Display
Supertwist nematic liquid crystal display with touch screen
Front Panel
Contains the On/Off switch and modifier keys indicators (see Figure 2-2)
Keypad
Standard 45-key keypad (30 and 15-key keypads not shown)
2-1
FRONT PANEL
This section describes the components found on the font panel.
Figure 2-2: Front Panel Components
Table 2-2: Front Components and Indicators
Item
Component
Description
Modifier LEDs
Indicates use of the SHIFT, CTRL, 2ND ALT and CAPS modifier keys
Battery LED
Lights red to indicate a low battery or green a charging battery
On/Off Switch
Controls the Power, Suspend and Resume operations
COMPACT FLASH SLOT COVER
The standard compact flash slot cover located on the top of the unit provides access to the compact flash slot
that stores memory and device cards. In addition to the standard cover, a modified cover which has a
machined opening that allows you to easily insert and remove devices cards that exceed 1.437 inches in
height, is also available.
Two phillips-head screws+ (2-56 x 5/16”) secure the cover to the top of the JETT. To insert device or
memory cards into the compact flash slot, you must first remove these screws using a phillips # 0 nonmagnetic tip screwdriver, which you can purchase from Two Technologies (Part Number 14673). You can
also purchase additional screws from Two Technologies (Part Number 12624).
For information about inserting and removing memory and device cards, see Using the Compact Flash Slot.
Figure 2-3: Standard Compact Flash Slot Cover, Closed
Figure 2-4: Standard Compact Flash Slot Cover, Opened
Figure 2-5: Modified Compact Flash Slot Cover for Long Device Cards
2-2
COMPONENTS AND INDICATORS
INTERFACE CONNECTIONS
This section describes the interface connectors found on the bottom of the JETT.
JETT•CONNECT SYSTEM
The JETT•connect system is a set of rugged interface and cable connectors especially designed for industrial
environments. It features positive connector retention without any hardware restraints for quick
connect/disconnect operations and a contact design that prevents failure due to pin fatigue and cable stress
after repeated use.
Figure 2-6: JETT•connect Interface Connector
RS-232 Interface Pin-Outs
1 3 5 7 9 11
Viewed facing connector
2 4 6 8 1012
Pin 1 = X1
Pin 7 = DSR
Pin 2 = Ground
Pin 8 = RTS
Pin 3 = RI
Pin 9 = DCD
Pin 4 = CTS
Pin 10 = 11-18VDC Input
Pin 5 = DTR
Pin 11 = Shield
Pin 6 = TXD
Pin 12 = RXD
DE-9 CONNECTORS
The DE-9 connectors emulate standard serial pin-out connections, and allow you to connect the JETT to
most desktop PCs using a standard null modem cable.
Figure 2-7: DE-9 Male Interface Connector
RS-232 Interface Pin-Outs
Viewed facing connector
Pin 1 = DCD
Pin 6 = DSR
Pin 2 = RXD
Pin 7 = RTS
Pin 3 = TXD
Pin 8 = CTS
Pin 4 = DTR
Pin 9 = 11-18VDC Input
Pin 5 = Ground
Figure 2-8: DE-9 Female Interface Connector
RS-232 Interface Pin-Outs
Viewed facing connector
COMPONENTS AND INDICATORS
Pin 1 = DTR
Pin 6 = DTR
Pin 2 = TXD
Pin 7 = CTS
Pin 3 = RXD
Pin 8 = RTS
Pin 4 = DSR/DCD
Pin 9 = 11-18VDC Input
Pin 5 = Ground
2-3
6-PIN MODULAR CONNECTOR
Despite its physical similarity to a telephone jack, the 6-pin modular connector is not compatible with
telephone lines or signals. Connecting the JETT to a telephone line will damage it and void the warranty.
Figure 2-9: 6-Pin Modular Interface Connector
RS-232 Interface Pin-Outs
Pin 1 = 11-18 VDC Input
Pin 2 = CTS
Pin 3 = RTS
Pin 4 = RXD
Pin 5 = TXD
Pin 6 = Ground
Viewed facing connector
POWER JACK
The optional power jack found on the bottom of the JETT enables you to connect an 11-18 VDC Input power
supply battery charger, such as Two Technologies #14508. Use of other power supplies unless approved by
Two Technologies may cause damage to the unit and void the warranty.
Figure 2-10: Power Jack
Viewed facing connector
POWER SUPPLIES, CABLES AND ADAPTERS
Two Technologies can provide the following optional power supplies, cable and adapters based on
communication and power requirements. For cable signal and pin assignments, see Appendix B: Signal and
Pin Assignments.
Table 2-3: Available Power Supplies, Cables and Adapters
Two Technologies Part #
1.
2-4
Part Description
14508
11–18VDC Power Supply (North America Only) 1
91708
Black, 15-Foot JETT•connect Cable (DE-9 Male)
91709
Black, 15-Foot JETT•connect Cable (DE-9 Female)
1210-7-BK
Black, 7-Foot Coiled Modular-to-Modular Cable
1210-15-BK
Black, 15-Foot Coiled Modular-to-Modular Cable
14375
Black, 15-Foot Null Modem Cable (DE9 Female to DE9 Female)
CELAT-P
Modular Cable to DE-9 Cable Adapter
Use of other power supplies unless approved by Two Technologies may cause damage to the unit and void the warranty.
COMPONENTS AND INDICATORS
CHAPTER 3
OPERATION
THE POWER/SUSPEND SWITCH
The On/Off switch is located above the keypad. Its function depends on the state of the JETT at the time the
switch is pressed and on the length of time that the switch is depressed. Operations that the Power switch
can initiate are:
•
Power On
•
Power Off
•
Suspend
Figure 3-1: Power/Suspend Switch
POWER ON
To power on the JETT:
1.
Press and hold the ON/OFF switch for one second. The unit should turn on and begin displaying
the boot-up process. For example:
*****
JETT.ce
*****
Loader Ver x.x.x
Booting nk.gz from System Socket
Reading gzip file from SYSTEM Socket
##########################################
Loading CE Image...
###
Where x.x.x is the version number
2.
After approximately 15 seconds, the Windows CE .NET desktop should appear. If the unit does not
power up or you cannot select any items from the desktop, refer to the “Troubleshooting” chapter
for help.
3-1
POWER OFF
To turn off the JETT, press and hold the ON/Off switch for approximately eight seconds. This action will
also terminate running applications and cease serial port operations).
SUSPEND MODE
Suspend mode allows you to suspend, but not terminate active applications. In this mode, the display will
turn off and the JETT will cease serial port operations. For battery-powered units, use of Suspend mode also
conserves battery power.
To place the unit in Suspend mode, press and release the ON/Off switch.
To take the JETT out of Suspend mode, press and release the ON/Off switch again. The display will turn on
and the JETT will resume running any suspended application, but you must restart any serial port
operations.
If you attempt to resume immediately after suspending the JETT or vice versa, the unit will automatically
delay three seconds before resuming or suspending.
USING THE RECHARGEABLE BATTERY
The JETT comes with a rechargeable Nickel Metal Hydride (NiMH) battery pack that can provide up to
twelve hours of operating time on a full charge (depending on power management and use). This battery is
fully charged and installed in the unit when shipped. However, because some battery dissipation occurs
between the time when the unit ships and when you start using it, you should charge the unit for
approximately four hours before using it without the battery charger/power supply connected.
CHARGE/LOW BATTERY INDICATOR
When using the NiMH battery pack, the CHARGE/LOW BAT LED will indicate the current battery status
as shown in the table below.
Figure 3-2: Charge/Low Battery Indicator
Table 3-1: Charge\Low Battery Indicator Functions
Function
CHARGE
LOW BAT
3-2
Description
With the power supply connected, the CHARGE/LOW BAT LED will indicate one of
following conditions:
ƒ
High Power Charge—the LED will turn solid green until the battery reaches
80% capacity of its charge capacity
ƒ
Trickle Charge—the LED will blink green about four times a second when the
battery reaches 80% capacity of its charge capacity
With the power supply disconnected, the CHARGE/LOW BAT LED will indicate one
of following conditions:
ƒ
Batteries are low— the CHARGE/LOW BAT LED will blink red once per
second when there is approximately 30 minutes of power remaining
ƒ
Batteries are very low—the CHARGE/LOW BAT LED will turn solid red
when there is approximately 10 minutes of power is remaining
OPERATION
CHARGING THE UNIT
The nickel metal hydride battery technology used in the JETT has exceptional charge life without the
“charge memory” characteristic of conventional nickel cadmium batteries. Partially discharged batteries or
extended periods with the charger left connected will not adversely affect battery life or performance.
Note: Because the internal battery charger senses several conditions, including temperature, you should
charge the unit away from any known or potential heat sources. Units exposed to temperatures in excess of 110
degrees Fahrenheit during the charge cycle may experience incomplete charging and reduced operating
time per charge.
To charge the NiMH battery pack:
3.
Depending on your configuration, plug the power jack of the battery charger/power supply into
the corresponding cables connector and/or adaptors as shown below.
Figure 3-3: Using 91708, 91709, and14375 Cables
Power Supply/Battery Charger
To Unit
Figure 3-4: Using 1210 Series Cables
Power Supply/Battery Charger
To Unit
CELAT-P Adaptor
4.
Plug the interface cable into the connector on the bottom of the JETT. If your unit has a power jack
receptacle on the bottom of your JETT, just plug the power jack into that receptacle.
5.
Plug the battery charger/power supply into a power outlet. The Charge LED should turn on,
indicating that the batteries are charging (see Table 3-1).
Figure 3-5: Power Supply
6.
OPERATION
Once the battery is fully charged (approximately four hours), you can disconnect the AC power
supply and run the JETT exclusively on battery power.
3-3
REPLACING BATTERIES/BATTERY PACK
CAUTION! There is a risk of explosion if you replace the NiMH battery with an incorrect type. Only use a NiMH
battery supplied with your unit or a replacement NiMH battery supplied, recommended, or approved by Two
Technologies, Inc.
When using alkaline batteries, replace all alkaline batteries in the JETT at the same time. Do not mix old and
new batteries, mix different types or brands of batteries, or dispose of the batteries in a fire. These actions
can cause battery rupture or leakage that result in personal injury or property damage.
Remove the batteries from the JETT when not using the JETT for extended periods. Store the batteries in a
cool, dry location at normal room temperature.
To replace the rechargeable battery pack or change AA batteries:
7.
Turn the power off. With the unit face down, pull the battery cover retaining clip up from its
recessed slot and turn the clip in a counter clockwise motion (see Figure 3-6).
8.
Lift the cover up and remove the batteries/battery pack.
9.
If the unit contains a NIMH battery pack, use the tab to lift up on the battery pack and then out.
10. Close the battery cover and turn the battery cover retaining clip clockwise to lock the cover.
Figure 3-6: Changing Batteries
Battery Pack Cover
(opened)
Akaline Batteries
Battery Pack Cover
(closed)
NiMH
Battery Pack
TOP
CAUTION:
RISK OF EXPLOSION IF BATTERY
IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
PLEASE RECYCLE
BOTTOM
Tab
Retaining Clip
3-4
OPERATION
DATA ENTRY
KEYPADS
45-KEY KEYPADS
In order to provide the functionality of a full-sized keyboard with only 45 keys, the JETT keypad must
depart from PC-style key assignment conventions by making use of modifier keys. Units configured with
the standard 45-key keypad typically utilize five LED indicators (located above the ON/OFF switch) to
indicate the active state of keypad modifier keys. Units with 45-key keypads also have keypad functions to
adjust the contrast and backlight.
30-KEY KEYPAD
Units with a 30-key keypad provide a full complement of alphabetical characters. Users can access numeric
characters, punctuation characters, navigation keys and backlight control via the SHIFT key.
15-KEY KEYPAD
Typically, units shipped with a 15-key keypad have custom keyboard layouts geared toward specific
applications that must be loaded onto the unit. To provide you a method of navigating and using Windows
CE .NET until you configure and map your keypad for your application, Two Technologies provides a
template that shows how to access the default functions (see figure below).
Figure 3-7: Standard Keypad Layouts
Delete
PgUp
END
Home
G > H
- D
+ F
? H
: K
/ L
* N
7 P
8 Q
9 R
4 S
5 T
6 U
1 V
2 W
3 X
PgDn
Clear
[ M ? N
' O
& Q @ R
, S $ T
Tab
+ U
BKLT -
% Y
Pause
Tab
V = W
* Z
" .
F1
F2
BACK
SPACE
SPACE
F12
F4
SHIFT
F8
F9
F5
CTRL
BKLT
F6
F3
ENTER
F10
2ND
BKLT
BKLT +
F7
TAB
WMENU
F11
ALT
45-Key Keypad
OPERATION
Insert
ESC
ALT
SHIFT
0 Z
BACK
SPC
SPC
ESC
ENTER
30-Key Keypad
TAB
ALT
ESC
ENTER
Back
Space
2ND
CTRL
SPACE
15-Key Keypad
3-5
MODIFIER KEYS
The following modifier keys (located on the bottom of a standard keypad) enable you to access the various
functions that can appear on a key. Figure 3-8 provides an example.
Figure 3-8: 45-Keypad Multifunctional Key
Delete
Modifier keys take effect when first pressed and typically remain in effect until you press another key,
unless its another Modifier key (see Table 3-2). Optionally equipped units can use LEDs to indicate the
selection of a Modifier key.
•
CTRL and ALT Keys—operate in the same manner as on conventional PCs, except that by default
they have a one-time locking action to facilitate one-handed operation.
•
SHIFT Key—unlike conventional PC keyboards, the SHIFT key enables you to access symbols,
punctuation marks and navigation arrows rather than shift alphabetic keys to uppercase.
On standard JETT keypads, the functions and characters accessed via the SHIFT key appear in the
upper left of a key (shaded in gray in Figure 3-8).
By default, the SHIFT key has a one-time action. However, you can press the Shift key twice and
lock the keypad into Shift mode, wear each subsequent key press will only access characters that
appear in the upper left of a key. Pressing the Shift key a third time will release Shift mode.
•
2ND Key— shifts the numeric keys to corresponding function keys (1 = F1, 2 =F2, etc.) that are
found on conventional PC keyboards.
It also shifts other keys for punctuation, non-printing characters (such as Delete and TAB), and PC
key definitions (such as Page Up, Page Down, Home, Insert and Caps Lock).
On the standard JETT 45-key keypad, the functions and characters accessed via the 2nd key appear
at the bottom of a key, (shaded in blue in Figure 3-8).
Like the Shift key, the 2ND key has a default one-time action and a locking mode (i.e., pressing
the 2ND key twice will lock the keypad into 2ND mode).
Table 3-2: Modifier Key Actions
Key Presses
Result
Lowercase “a”
Shift & A
Move cursor left one position
2ND & A
Delete Character
2ND & Caps Lock
Uppercase “A”
KEY REPEAT
By default, the JETT does not automatically repeat a key stroke when you hold down a key. However, you
can enable the key repeat function by configuring the Keyboard setting in the Control Panel.
3-6
OPERATION
CE KEYBOARD
In addition to entering data through the keypad, you can also enter data by using the CE Keyboard. This
utility displays a keyboard on the screen to allow data entry via the Command Line or into applications
where “text accessibility” control has focus (i.e., text or combo box).
To use the CE Keyboard, select Programs > Tools> CeKeys from the Start menu.
To minimize the keyboard, click the keyboard icon that appears in the system tray
Figure 3-9: CE Keyboard
TRANSCRIBER
Microsoft Transcriber is a natural handwriting recognition software program that interprets pen movement
across the screen as handwriting (cursive, print or mixed) input. For more information, please refer to
Microsoft Transcriber Help on the JETT.
To run Microsoft Transcriber, select Programs > Tools> Transcriber from the Start menu.
Figure 3-10: Transcriber
OPERATION
3-7
THE WINDOWS CE .NET DESKTOP
This section provides a brief overview of the functions that appear on the JETT desktop. For information on
how to change desktop settings, refer to Windows CE .NET help (Start > Help).
Figure 3-11: Windows CE .NET Desktop
DESKTOP FUNCTIONS
You can access the following applications, functions and data entry utilities from the JETT desktop:
Table 3-3: Desktop Functions
Icon
Function
Description
Recycle Bin
Use the Recycle Bin to restore deleted files or empty the bin to create
more disk space.
My Device
Use My Computer to navigate and view the folders and files stored
on the JETT.
Inbox
Use the Inbox to send and receive e-mail by connecting to a POP3 or
IMAP4 server.
My Documents
The default storage location for documents, graphics, and other files.
Microsoft WordPad
Use WordPad to create or edit text files that contain formatting or
graphics.
Internet Explorer
Use Internet Explorer to view Web pages. You will need a modem or
Ethernet card to connect to an Internet service provider (ISP) or
network.
PC Link
Use PC Link to make an ActiveSync, Bluetooth or other type of
connection to another device
Media Player
With Windows Media Player, you can view and listen to multimedia
files (audio playback requires a bluetooth stereo headset and
appropriate service).
THE TASKBAR
The taskbar at the bottom of the JETT desktop displays the Start button, buttons of currently running
applications, the Status Area and the Show Desktop icon.
Tap the Start button to display the Start menu (see below for details). For each open application, a button
appears on the taskbar. Simply tap the button to activate the application.
The status area appears on the right and by default displays small icons for the input panel, current time,
power status and network connections. Tap an icon to activate the related program.
Tapping the Show Desktop icon minimizes active applications and redisplays the desktop. Tapping the
Keyboard icon displays the Input Panel menu for data entry.
Figure 3-12: Windows CE .NET Desktop Taskbar
3-8
OPERATION
POWER STATUS ICONS
The JETT will display power status icons (Table 3-4) in the taskbar status area (Figure 3-12) to indicate
power use, charging status and low battery conditions.
Table 3-4: Power Status Icons
Icon
Description
Batteries are charging
Batteries are low—approximately 30 minutes or less of use remaining (the
CHARGE/LOW BAT LED will blink red once per second)
Batteries are very low—approximately 10 minutes or less of use remaining (the
CHARGE/LOW BAT LED will turn solid red)
THE START MENU
When you tap Start, the Start menu appears.
Figure 3-13: Start Menu
By tapping one of the menu’s icons (and not the name), you can:
•
Open programs that do not appear on the desktop
•
View a list of web sites added to your Favorites List
•
View recently accessed documents and images
•
Access the Control Panel, establish connections, or configure the Taskbar and Start Menu
•
View Help
•
Start an application using the Run command
•
Place the unit in Suspend mode
SYSTEMCF FOLDER
The only folder that provides non-volatile (permanent) storage is the SystemCF folder. Information stored in
other folders will be lost when you remove power from the JETT. You can however, have the JETT
automatically copy files from the SystemCF to other folders when booting up.
OPERATION
3-9
USING THE COMPACT FLASH SLOT
The Compact Flash Slot located on top of the JETT enables you utilize a variety of devices such as memory
cards, barcode scanners, GPS cards and network cards.
If you intend to use a device card, it may also be necessary to install a driver. If so, make sure the card is
Windows CE .NET 4.2 compatible and you have the necessary drivers. If you are not sure, check with the
card manufacturer before attempting to install the card.
To use the compact flash slot:
1.
If needed, remove any screws from the cover to access the Compact Flash slot. Refer to the
“Compact Flash Slot Cover” section for information about cover and screw types.
2.
With the front of the display facing you, push the compact flash slot cover to the left. The slot cover
will automatically pop open. If the cover has a slot, you can skip this step.
3.
Insert the compact flash/device card into the slot with the front of the display facing you and the
top of the card pointed to the slot until it clicks and the release lever moves upward.
Figure 3-14: Using the Compact Flash Slot
Release Lever
3-10
4.
Close the cover.
5.
When inserting memory cards, a “UserCF” folder will appear when you open My Computer. You
can then copy and paste the contents of UserCF to the other folders on the JETT.
6.
When inserting device cards, the JETT will attempt to recognize the device. If it finds a driver for
the device, the JETT will display a dialog box for that device. For example:
7.
If the JETT cannot find a driver for the device, it will display the following dialog box:
8.
If the correct card type appears, you can enter the appropriate information in the dialog box and
then tap OK to complete the installation.
9.
To remove a card from a slot, simply push the card release lever down and remove the card.
OPERATION
CHAPTER 4
CONFIGURATION
THE CONTROL PANEL
The table below lists the available control panel functions on the JETT.
Table 4-1: Control Panel Functions
Icon
Function
Description
Aux Switch
For units with a second COM that supplies 5VDC output, use this
function to set the default power state (On or Off), and test the
connected devices.
Backlight
Use this function to adjust the backlight setting for the following
conditions: Line Active, Line Active Inactive, Battery Active and
Battery Inactive.
Battery Select
Select one of the following options to calibrate the power status icons
for proper use: NIMH, AC Line or Alkaline.
Beep Select
Use this function to change the frequency, volume and duration
properties of the beep.
Certificates
Use this function to import, view or remove certificates, which
protect your personal information on the Internet, and protect your
computer from unsafe software.
CPU Speed
Use this function to determine the current CPU and cold boot-up
speed. Allowable selections are 312 MHz and 624 MHz).
Date/Time
Use this function to adjust the date, time and time zone.
Dialing
Use this function to adjust the dialing location settings and dialing
patterns when using a modem.
Display
Use this function to adjust the backlight timeout, change the
background image or change the desktop color scheme.
Display Rotation
Use this function to rotate the screen 180 degrees (upside down).
Hot Keys
Use this function to assign functionality to the unit’s eight
programmable keys.
Internet Options
Use this function to set up connections, security settings and internet
related functions.
Keyboard
Use this function to change the repeat delay and repeat rate.
Network and
Dial-up Connections
Use this function to change network adapter settings and/or set up
identification for remote networks.
Owner
Use this function to enter the owner name, address, phone numbers,
notes and network ID.
Password
Use this function to enable password protection and set a password.
4-1
Icon
Function
Description
PC Connection
Use this function to enable direct connection to a desktop computer
Power
Use this function to:
ƒ
Check battery power
ƒ
Set device to turn off when idle
ƒ
Set up power schemes
ƒ
Check the power levels of your system devices
Regional Settings
Use this function to change the appearance of region specific
information, such as date, time and currency.
Remove Programs
This function enables you to remove programs installed in RAM.
Stylus
Use this function to recalibrate the touch screen and adjust the stylus
double-tap rate.
System
Use this function to view system information, change the RAM
(Program/Storage memory) division, change the device name and
change the device description.
VComAdj
Use this function to minimize screen flicker and adjust contrast.
POWER MANAGEMENT
Battery-powered units can utilize a rechargeable Nickel Metal Hydride (NiMH) battery pack that has an
average operating time between ten and twelve hours on a full charge with power management and
approximately eight hours without power management. As with all battery-powered devices, the operating
time is completely dependent on the environment, device usage and the number and type of powerdrawing peripherals attached. The battery discharge rate in a full “Power Off” state is only slightly higher to
the self-discharge rate of the battery itself.
Note: Allowing the batteries to remain in a low or very low condition will cause the unit to enter Suspend mode.
In either case, you should save your work and recharge the unit as soon as possible
To lengthen the time between charges, you can perform the following actions:
4-2
•
Use external power for PC Card operations whenever possible— some PC Cards as well as
extended communication via the serial port, may require large amounts of power to operate, and
can quickly drain the batteries.
•
Limit the use of backlight—minimize backlight use when you are operating on battery power. You
can adjust the backlight timeout level through the Display Settings in the Control Panel or on some
units by using the keypad.
•
Shorten Auto-suspend time—the JETT is automatically set to suspend operation to conserve
battery power when you have not used the keyboard or the stylus after three minutes. You can
increase the Auto-suspend time by changing the Power settings in the Control Panel.
CONFIGURATION
TASKBAR AND START MENU SETTINGS
To change the Taskbar and Start Menu settings:
1.
Select Start > Settings> Taskbar & Start Menu. The Taskbar and Start Menu Properties dialog box
opens:
2.
Select the General tab:
3.
Check Always on Top to ensure that the taskbar is always visible, even when a program appears in
a full window (maximized).
4.
Check Auto hide to display the taskbar just when you point to the taskbar area.
5.
Check Show Clock to display the time of day in the taskbar.
6.
Select the Advanced tab:
7.
Tap the Clear button to remove the contents of the documents menu.
8.
Check the Expand Control Panel box to display the contents of the Control Panel as items on the
Settings| Control Panel menu.
9.
Tap OK to save the settings and exit the menu.
SAVING CHANGES
The JETT internal memory consists of DRAM and Flash. Typically, any changes made to the JETT including
file creation are temporarily stored in the unit’s DRAM. You must then copy the files from DRAM to
internal flash memory or a removable compact flash card to store the information permanently.
Consequently, if you do not store the information to flash memory and the unit loses power, all information
stored in DRAM will be lost. However, whenever you make changes that affect the registry, such and
changing settings in the Control Panel or installing software, you can permanently store registry changes
without writing to flash memory by using the Persistent Registry.
Note: The JETT will also store registry information every time you perform a suspend/resume operation.
To store registry information on the JETT permanently:
CONFIGURATION
1.
From the Start menu, select Programs and tap SaveReg.
2.
The JETT will begin saving the registry.
3.
After you successfully save the registry, a message box will appear:
4.
Tap OK to close the message box.
4-3
CHAPTER 5
MAKING CONNECTIONS
CREATING AN ACTIVESYNC CONNECTION
ActiveSync is a desktop utility program (available as a free download from Microsoft) that allows you to
synchronize certain types of information between a PC and the JETT. You can also use ActiveSync to
transfer files and install programs on the JETT.
When connecting the JETT to the PC via ActiveSync, you can opt to create a partnership and subsequently
have the PC automatically recognize the JETT and synchronize information. You can also create a temporary
Guest partnership to copy files and install programs.
The following procedures describe how to make an ActiveSync connection using a serial interface cable.
INITIAL COMMUNICATION
To setup initial communication between the PC and the JETT:
1.
Connect an interface cable to an available COM port on the PC and the RS-232 port on the JETT.
2.
On the PC, start ActiveSync.
3.
On the ActiveSync menu bar, select Connection Settings from the File menu. The Connection
Settings dialog box opens.
4.
If not selected, check the Allow serial cable or infrared connection to this COM port box, and
assign the number of the available COM port (typically COM1).
5-1
5.
Click OK to exit.
6.
On the ActiveSync menu bar, select Get Connected from the File menu. ActiveSync will then start
the Get Connected wizard.
7.
Click Next. ActiveSync will start attempting to establish a connection (this process will take several
seconds).
8.
On the JETT, tap PC Link.
9.
The following message box appears:
10. If ActiveSync successfully establishes communications, the ActiveSync dialog will briefly reappear
on the PC and start the New Partnership dialog wizard.
11. Select your Partnership option as needed and complete the wizard. The ActiveSync dialog box will
reappear and display a status of “Connected.” For example:
5-2
MAKING CONNECTIONS
12. On the JETT, an icon indicating a ActiveSync connection will appear in the system tray.
13. To terminate the ActiveSync connection, double-tap the connection icon to display the Connect to
PC-115K dialog box and tap Disconnect.
SUBSEQUENT COMMUNICATION
After you install ActiveSync and establish the initial communication between the PC and the JETT, use the
following procedure to set up subsequent sessions:
1.
If not already attached, connect an interface cable to an available COM port on the PC and the RS232 port on the JETT.
2.
On the JETT desktop, tap PC Link to attempt to reestablish communications
3.
If you have setup a partnership, the JETT will automatically reconnect and attempt to synchronize
any files. If you have not setup a partnership, the New Partnership wizard will appear.
4.
Select No on the PC and then click Next. “Connected” should appear in the ActiveSync window.
MAKING CONNECTIONS
5-3
MAKING A BLUETOOTH CONNECTION
Named after a tenth-century Danish king that united Denmark and Norway, Bluetooth is a worldwide
standard for the wireless exchange of data between two devices. Typical uses of Bluetooth include:
•
File Transfer
•
Local Area Network access
•
Object exchange between computers (OBEX)
•
Serial port emulation
•
File system synchronization
Bluetooth technology utilizes a radio link that operates in the unlicensed Industrial Scientific and Medical
band (between 2402 and 2480 MHz.) to transmit data at speeds up to 721 Kbps. The effective range between
devices is approximately 10 meters.
Bluetooth technology also employs a Frequency Hopping Spread Spectrum (FHSS) scheme to make the
connection robust and operate in a noisy radio frequency environment. FHSS works by hopping to a new
frequency each time it transmits or receives a data packet (up to 1600 times per second) to avoid interference
from other signals.
When Bluetooth devices come within range of each other, they form an ad hoc network. Each device can
then perform a query to discover the available services of the other device.
In order to connect and share services via Bluetooth wireless technology, two devices must support the
same Bluetooth Profile(s) as well as opposite device roles (i.e., one must be the server, and the other must be
the client). Bluetooth enabled devices often support multiple profiles, and if involved in multiple
connections, can perform different device roles simultaneously.
To provide security, each link is encoded and protected against eavesdropping and interference. Bluetooth
devices can also request the entry of a matching passkey or Personal Identification Number (PIN) to enable
access to its services.
Before you start, make sure that you enable the Bluetooth device you wish to connect to the JETT and that it
is set in discoverable mode. You may also need to configure the service you want to use on the device for
authentication, encryption and COM port assignment
When frequently exchanging data, it is best to pair the JETT with the other Bluetooth device. This process
saves the connection information (device name, passkey, etc.) and allows automatic actions (such as
ActiveSync connections) to occur without operator intervention. Refer to the remote device’s user
documentation for instructions.
If you are using authentication, make sure you have any PIN codes or passkeys handy at both devices.
To make a Bluetooth connection:
5-4
1.
Tap the Bluetooth icon on the taskbar.
2.
Make sure the Bluetooth status is set to “ON.” Select the Accessibility tab and ensure that the JETT
is discoverable and connectable.
MAKING CONNECTIONS
3.
Select the Services tab and enable the File Transfer Service.
4.
5.
Select the General tab and click Bluetooth Connection Manager.
6.
Click Generic Device Search.
7.
Click Next. The JETT will begin to search for other Bluetooth devices.
8.
Select a device and click Next.
MAKING CONNECTIONS
5-5
9.
The JETT will then list the available services of the selected Bluetooth devices.
10. Select File Transfer and click Next.
11. Click Connect.
12. When prompted, enter the passkey.
13. After establishing a connection, the JETT will display a list of available files on the connected
device
5-6
MAKING CONNECTIONS
MAKING CONNECTIONS
5-7
MAKING A WIRED ETHERNET NETWORK CONNECTION
Note: If you are using communications cards other than those supplied by Two Technologies, you will need to
install the appropriate drivers for Windows CE .NET 4.2 and ARMV4 processors.
To create a Wired Ethernet connection:
1.
Insert the Ethernet card into the JETT and connect the cable to the network.
2.
Select Start > Settings > Control Panel. Double-tap Network and Dial-Up Connections.
3.
Double-tap the connection icon for the adapter. For example, if you have a NE2001 Ethernet
adapter, double-click the NE2001 connection icon.
4.
In the Ethernet Driver Settings dialog box, select Obtain an IP address via DHCP and tap OK.
5.
If prompted, enter the User Name, Password, and Domain name you use to log on to your
network.
SETTING UP IDENTIFICATION FOR REMOTE NETWORKS
To set up identification for remote networks:
5-8
1.
Select Start > Settings > Control Panel.
2.
Double-tap Owner.
3.
In the Network ID tab, enter the user name, password, and domain name you use to log on to the
remote network.
MAKING CONNECTIONS
CONNECTING TO A MAIL SERVER
You can send and receive e-mail by connecting to a POP3 or IMAP4 server. Inbox contains an e-mail service
for each method you use. For either service, you must establish a connection to your Internet service
provider (ISP) or to the appropriate mail server in your local area network. In addition to creating this
connection, you must also create the e-mail service.
Prior to setting up a service, you should obtain the following information from your ISP or network
administrator: POP3 or IMAP4 server name, SMTP host name, user name, password and domain name (for
network connections only).
Notes: Windows CE .Net does not support other mail protocols such as AOL or services that use special
authentication, such as MSN. However, you can gain access to the Internet through these services. If you use
the same service to connect to different mailboxes, set up and name a different service for each connection.
For additional information about the inbox, refer to Windows CE .NET online help.
To connect to your POP3 or IMAP4 mail server:
1.
Select Start > Programs > Inbox > Services > Options. The Options dialog box opens.
2.
Select the Services tab and tap Add. The Service Name dialog box opens.
3.
From the Service type list, select POP3 Mail or IMAP4 Mail.
4.
Enter a unique name for the service (you cannot change this name once entered).
5.
Tap OK. The Mail Service Setup wizard appears.
MAKING CONNECTIONS
5-9
6.
In the Required panel:
ƒ
Select the name of the connection you created to connect to the mail server. If you are receiving
e-mail through a network (Ethernet) connection, select Network Connection.
If you want Inbox to use your current connection, select (none).
If you have not created a connection, select Create new connection, double-tap the Make New
Connection icon, and follow the instructions in the wizard. When finished, select Inbox in the
Taskbar and continue setting up Inbox.
7.
ƒ
Enter the POP3 Host or Server (IMAP4) name of the mail server you use to receive and send
messages.
ƒ
Enter the User ID (user name or mailbox ID) assigned to you.
ƒ
Enter the Password you will use to access this mail account. If you do not want a prompt to
enter the password each time you connect, select Save password.
In the Optional panel:
ƒ
If connecting to a network that uses Windows NT domain security, enter the Windows NT
domain name.
ƒ
If your mail service uses a separate server for SMTP, enter the SMTP Host name. For POP3
Mail service with an ISP, the ISP must use an SMTP mail gateway.
ƒ
Enter your return e-mail address.
8.
Tap Next. The General Preferences dialog box opens.
9.
Choose any of the settings, all of which are optional, then click Next. The Inbox Preferences dialog
box opens.
10. Choose any of the settings as needed, then click Finish. The Mail Service Setup wizard closes and
the Options dialog box reappears.
Note: Receiving entire messages consumes storage memory.
11. Close the Options dialog box to return to the Inbox.
5-10
MAKING CONNECTIONS
CHAPTER 6
TROUBLESHOOTING
MY JETT DOES NOT RESPOND WHEN I PRESS THE POWER BUTTON.
•
Is the unit in Suspend mode?
•
If battery-powered, check the batteries.
•
Are all cables connected properly:
ƒ
Is the power supply plugged into an active AC outlet?
ƒ
Is the power connector securely plugged into the JETT?
I CHANGED MY SYSTEM SETTINGS, BUT WHEN I TURN ON THE JETT, MY SETTINGS ARE GONE.
•
You must save the registry after making any system or configuration changes.
I TRANSFERRED FILES TO THE JETT FROM MY HOST COMPUTER, BUT WHEN I TURN ON THE JETT
MY TRANSFERRED FILES ARE MISSING.
•
To store transferred files permanently, you must file copy the files into internal flash memory or a
compact flash card.
Occasionally, transferred files can be hidden from view, double-tap My Computer, select Options
from the View menu and clear all boxes.
I CANNOT CONNECT TO THE DEVELOPMENT SYSTEM USING ACTIVESYNC.
•
Did you install ActiveSync using the Administrator account?
•
Check the cable connections.
•
Check the serial communications configuration.
•
Make sure the correct COM port is available.
•
In ActiveSync, check the Connection Settings for the connection type you are using (Serial or
Ethernet).
THE SCREEN IS TOO LIGHT OR TOO DARK.
•
Adjust the brightness via the brightness control in the Control Panel.
THE STYLUS IS NOT RESPONDING PROPERLY.
•
The screen is not calibrated correctly to interpret the screen taps. You need to recalibrate the screen.
6-1
THE JETT ACTS SLOWLY.
•
The unit may be short of program memory or storage memory.
•
Increase the amount of storage or program memory through the System control in the Control
Panel.
•
You can also delete any unnecessary files.
I GET LITTLE OR NO SOUND FROM THE JETT.
•
Adjust the volume and sound properties via the Volume and Sound control in the Control Panel.
THE JETT DOES NOT RECOGNIZE A COMPACT FLASH OR DEVICE CARD.
•
The card is not installed or seated properly.
•
Reinstall the card. There may be an unstable connection between the card and the JETT.
•
Remove the card, clean the edge connector with a soft dry cloth, and reinstall the card.
THE JETT GOES INTO AUTO-SUSPEND AFTER A SHORT PERIOD OF INACTIVITY.
•
As a default, the device will auto-suspend after two minutes of inactivity while running on
batteries and after thirty minutes of inactivity when running on AC power.
•
Adjust the power management properties via the Power control in the Control Panel.
NO SOUND IS HEARD WHEN YOU TAP THE TOUCH SCREEN OR PRESS A KEY.
6-2
•
Volume setting is low or turned off.
•
Check the volume slider in the Volume & Sound properties dialog box in the Control Panel.
TROUBLESHOOTING
APPENDIX A
SPECIFICATIONS
POWER
Recharge/Line-Power: 11 to 18 VDC, 1.5A
Standard: Input at 11 to 18 VDC via JETT•connect system interface for line-power or battery charging
operations
Optional: Output at 5 VDC @ 1.2A to operate peripheral devices (either port)
Rechargeable Battery Type: Nickel Metal Hydride (or 6 AA alkaline batteries)
ƒ
Current Rating: 2 Amp Maximum
ƒ
Voltage: 7.2 Volts
ƒ
Capacity: 1400 mAh
DISPLAY
Supertwist Nematic Liquid Crystal TFT Touch Screen with white LED backlight
Resolution: 320 x 240 pixels QVGA color
CPU
Type: Intel PXA270 processor
Speed: up to 624 MHz
Operating System: Windows CE 5.0
MEMORY AND MASS STORAGE
SDRAM: 128 MB (256 MB optional)
Internal Compact Flash: 512 MB standard (30 MB reserved for OS), upgradeable to 2 GB
Optional: Compact flash card slot
USER INPUT
Touch Screen
Key Pad: 45-Key membrane (9 rows x 5 columns) or 15-key elastomeric (5 x 3)
Feedback: Tactile and audible
Optional: LED backlighting
INDICATORS
5 Modifier Key/Programmable LEDs
Charge/Low Battery Indicator (battery-powered units only)
CONNECTIVITY
Standard: JETT•connect serial port with choice of full RS-232 or a choice of two of the following: short
RS-232 (2), short RS-422 or short RS-485.
Optional: Modular serial port with a choice of short RS-232 or Charge Jack
Standard: Integrated Bluetooth (Class 2)
A-1
BLUETOOTH
Specification: Bluetooth 1.2
Data Rate: 720 kbps maximum
Frequency Range: Bluetooth 2.4 GHz ISM band frequency hopping
Transmit Range: Up to 30 feet (10 meters)
Authentication: Via passkey
ENVIRONMENTAL
Operating Temperature: -20°C to +50°C
Storage Temperature: -20°C to +70°C
 Charging Temperature: -20°C to + 40°C
Humidity: 5-95% Non-condensing
IP Rating: 65
PHYSICAL DIMENSIONS
Height (H): 9.84 Inches (250 mm)
Width (W): 4.75 Inches (120.7 mm)
Depth (D): 1.83 Inches (46.5 mm)
Weight with NiMH Batteries: 29 Ounces (822 grams)
Weight with Alkaline Batteries: 28 Ounces (794 grams)
Weight without Batteries: 23 Ounces (652 grams)
Figure A-1: Case Dimensions
A-2
SPECIFICATIONS
APPENDIX B
SIGNAL AND PIN ASSIGNMENTS
JETT•CONNECT CABLES
Figures B-1 and B-2 list the standard RS-232 signal and pin assignments for the JETT•connect cables.
Figure B-1: 708 Cable (Male DE9) RS-232 Signal and Pin Assignments
11 9 7 5 3 1
1 2 3 4 5
Viewed Facing
Connector
6 7 8 9
12 10 8 6 4 2
JETT• Connect
DE 9 Connector
White w/Black Stripe
Pin 1 (Reserved)
Pin 2 (GND)
Pin 3 (RI)
Pin 4 (CTS)
Pin 5 (DTR)
Pin 6 (TXD)
Pin 7 (DSR)
Pin 8 (RTS)
Pin 9 (DCD)
Pin 10 (PWR)
Power
Blue
Gray
Black
Violet
Yellow
Brown
Red
Orange
Pin 5 (GND)
Pin 9 (RI)
Pin 8 (CTS)
Pin 4 (DTR)
Pin 3 (TXD)
Pin 6 (DSR)
Pin 7 (RTS)
Pin 1 (DCD)
White
Pin 11 (SHIELD)
Pin 12 (RXD)
Green
Pin 2 (RXD)
B-1
Figure B-2: 91709 Cable (Female DE9) RS-232 Signal and Pin Assignments
11 9 7 5 3 1
5 4 3 2 1
Viewed Facing
Connector
9 8 7 6
12 10 8 6 4 2
JETT• Connect
DE 9 Connector
Pin 1 (Reserved)
Blue
Pin 2 (GND)
Pin 5 (GND)
Gray
Pin 3 (RI)
Pin 9 (RI In)
Red
Pin 4 (CTS)
Pin 7 (CTS In)
Orange
Pin 5 (DTR)
Pin 1 (DTR Out)
Green
Pin 6 (TXD)
Black
Pin 8 (RTS)
Violet
Pin 9 (DCD)
Pin 2 (TXD Out)
Brown
Violet
Pin 7 (DSR)
Power
White w\Black Stripe
Pin 6 (DTR Out)
Pin 8 (RTS Out)
Pin 4 (DSR/DCD In)
White
Pin 10 (PWR)
Pin 11 (SHIELD)
Yellow
Pin 12 (RXD)
Pin 3 (RXD In)
1210 SERIES MODULAR INTERFACE CABLES
Figure B-3 lists the signal and pin assignments for 1210 series modular cables.
Figure B-3: 1210 Series Modular Cable Signal and Pin Assignments
Pin 1
Pin 6
6-Pin Modular Jack
B-2
Pin 6
Pin 1
6-Pin Modular Jack
Pin 1 (Blue)
Pin 6
Pin 2 (Yellow)
Pin 5
Pin 3 (Green)
Pin 4
Pin 4 (Red)
Pin 3
Pin 5 (Black)
Pin 2
Pin 6 (White)
Pin 1
SIGNAL AND PIN ASSIGNMENTS
MODULAR CABLE ADAPTERS
Pin descriptions assume connection through reversing cables (1210-7, 1210-15) to JETT.
CELAT-P ADAPTER
Figure B-4 lists the signal and pin assignments for the CELAT-P adapter.
Figure B-4: CELAT-P Adapter
Pin 5
Pin 6
Pin 1
Pin 9
Viewed Facing
Connector
6-Pin Modular Jack
Pin 1 (Blue)
Pin 2 (Yellow)
Pin 3 (Green)
Pin 4 (Red)
Pin 5 (Black)
Pin 6 (White)
Pin 1
Pin 6
DE 9 Connector
Power
Pin 5 (Common)
Pin 2 (Data Out)
Pin 3 (Data In)
Pin 1 (CTS)
Pin 6 (RTS)
Pin 8 (Handshake Out)
Pin 7 (Handshake Out)
Pin 4
Pin 9 (RI)
NULL MODEM CABLE
Figure B-5 lists the signal and pin assignments for Two Technologies’ 14375 DE-9 Female to DE-9 Female
null modem cable. Please note that this cable differs from standard null modem cables in that it uses Pin 9
for input power for the JETT.
Figure B-5: DE-9 Female to DE-9 Female Null Modem Cable
1 2 3 4 5
1 2 3 4 5
Viewed Facing
Connector
6 7 8 9
Female DE9 Connector
6 7 8 9
Female DE9 Connector
Pin 1 (Blue)
Pin 1
Pin 2 (Green)
Pin 3 (Yellow)
Pin 2
Pin 3
Pin 4 (Orange)
Pin 5 (Gray)
Pin 4
Pin 5
Pin 6 (Blue)
Pin 6
Pin 7 (Red)
Pin 7
Pin 8 (Violet)
Pin 8
Pin 9 (Brown)
Pin 9
Power Jack
SIGNAL AND PIN ASSIGNMENTS
B-3
INDEX
1210 Series Modular Cable............................................. 2-4, B-2
15-Key Keypad....................................................................... 3-5
2ND Key................................................................................. 3-6
2ND Mode .............................................................................. 3-6
30-Key Keypad....................................................................... 3-5
45-Key Keypads ..................................................................... 3-5
About the JETT•ce.................................................................. 1-1
About this Manual .................................................................. 1-1
About Two Technologies ....................................................... 1-1
ALT Key................................................................................. 3-6
Aux Switch ............................................................................. 4-1
Modified .............................................................................2-2
Open Position......................................................................2-2
Components and Indicators .....................................................2-1
Connecting to a Mail Server....................................................5-9
Connector Covers....................................................................1-3
Control Panel...........................................................................4-1
Control Panel Functions ..........................................................4-1
CPU Specifications ................................................................ A-1
CPU Speed ..............................................................................4-1
CTRL Key...............................................................................3-6
Date/Time................................................................................4-1
DE-9 Female Metal Plug.........................................................1-3
DE-9 Male Metal Plug ............................................................1-3
Desktop Functions...................................................................3-8
Dialing.....................................................................................4-1
Display .............................................................................2-1, 4-1
Display Rotation......................................................................4-1
Display Specifications............................................................ A-1
Displays...................................................................................1-2
Durability ................................................................................1-2
Environmental Specifications................................................. A-2
Backlight ................................................................................ 4-1
Battery Indicator ..................................................................... 2-1
Battery Select.......................................................................... 4-1
Beep Select ............................................................................. 4-1
Front Components and Indicators ...........................................2-1
Fully/Near Full Charge............................................................3-2
High Power Charge .................................................................3-2
Hot Keys .................................................................................4-1
Cable Connections.................................................................. 2-4
JETT•connect System ........................................................ 2-3
Case Dimensions ................................................................... A-2
CE Keyboard .......................................................................... 3-7
CeKeys ................................................................................... 3-7
CELAT-P Adapter.......................................................... 2-4, B-3
Certificates.............................................................................. 4-1
Charge\Low Battery Indicator ................................................ 3-2
Charge\Low Battery Indicator Functions................................ 3-2
CHG Indicator ........................................................................ 3-2
Compact Flash Slot Cover ...................................................... 2-2
Closed Position................................................................... 2-2
Inbox .......................................................................................3-8
Indicator Specifications.......................................................... A-1
Indicators.................................................................................1-2
Ingress Protection....................................................................1-3
Integrated Wireless Options ....................................................1-2
Intel PXA255 ..........................................................................1-2
Interface Capabilities...............................................................1-2
Internet Explorer .....................................................................3-8
Internet Options.......................................................................4-1
I-1
IP65 ........................................................................................ 1-3
JETT•ce Features.................................................................... 1-2
JETT•connect Cable ....................................................... 2-4, B-1
JETT•connect Plug ................................................................. 1-3
JETT•connect System............................................................. 2-3
Key Repeat ............................................................................. 3-6
Keyboard ................................................................................ 4-1
Keypad.................................................................................... 2-1
Keypads ........................................................................... 1-2, 3-5
LOW BAT Indicator............................................................... 3-2
Making a Bluetooth Connection ............................................. 5-7
Making a Wired Ethernet Network Connection...................... 5-8
Making Connections............................................................... 5-1
Media Player........................................................................... 3-8
Memory and Mass Storage ..................................................... 1-2
Memory and Mass Storage Specifications............................. A-1
Microsoft WordPad ................................................................ 3-8
Modifier Keys......................................................................... 3-6
Modular Cable Adapters.........................................................B-3
Modular to DE-9S Adapter..................................................... 2-4
Modular-to-Modular Cable..................................................... 2-4
My Device .............................................................................. 3-8
My Documents ....................................................................... 3-8
Network and Dial-up Connections.......................................... 4-1
Null Modem Cable .................................................................B-3
Operating System ................................................................... 1-2
Owner ..................................................................................... 4-1
Partnership.............................................................................. 5-1
Password................................................................................. 4-1
PC Connection........................................................................ 4-2
Physical Dimensions.............................................................. A-2
Power...................................................................................... 4-2
Power Management ................................................................ 4-2
Power Off ............................................................................... 3-2
I-2
Power On.................................................................................3-1
Power Plug ..............................................................................1-3
Power Requirements .............................................................. A-1
Power Status Icons ..................................................................3-9
Power Supply ..........................................................................2-4
Power/Suspend Switch............................................................3-1
Processor .................................................................................1-2
QVGA-TFT.............................................................................1-2
Rechargeable Battery Pack......................................................1-2
Recycle Bin .............................................................................3-8
Regional Settings ....................................................................4-2
Remove Programs ...................................................................4-2
Saving Changes to the Registry...............................................4-3
Setting Up Identification for Remote Networks ......................5-8
SHIFT Key..............................................................................3-6
Shift Mode...............................................................................3-6
Start Menu...............................................................................3-9
Stylus.......................................................................................4-2
Suspend Mode.........................................................................3-2
System.....................................................................................4-2
SystemCF Folder.....................................................................3-9
Taskbar....................................................................................3-8
Taskbar and Start Menu Settings.............................................4-3
The Windows CE .NET Desktop ............................................3-8
Torx screws .............................................................................2-2
Troubleshooting ......................................................................6-1
User Input Specifications ....................................................... A-1
Using ActiveSync....................................................................5-1
Initial Communication ........................................................5-1
Subsequent Communication ...............................................5-3
Using the Compact Flash Slot ...............................................3-10
VComAdj ................................................................................4-2
Xenoy......................................................................................1-2
INDEX

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 52
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:3701de6a-814b-4276-b517-c0c80456e22c
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Company                         : Two Technologies
Source Modified                 : D:20060405154614
Create Date                     : 2006:04:05 11:46:47-04:00
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2006:04:05 11:55:29-04:00
Metadata Date                   : 2006:04:05 11:55:29-04:00
Document ID                     : uuid:2e2d89ff-8c00-46d7-8725-f6d0804bdce7
Format                          : application/pdf
Title                           : JETT•XL User's Guide
Creator                         : Vince Rudi
Description                     : MAN0359, Rev. B
Tagged PDF                      : Yes
Author                          : Vince Rudi
Subject                         : MAN0359, Rev. B

EXIF Metadata provided by EXIF.tools