Tyco Safety Canada 07GS3060 GSM Alarm Communicator User Manual

Digital Security Controls Ltd. GSM Alarm Communicator Draft1 29007442R001 GS3060 V3 0 IM EN P65

a href="https://usermanual.wiki/Tyco-Safety-Canada" itemprop="url"> Tyco Safety Canada >

user manual

GS3060GSM-GPRS INTERFACEWARNING: This manual contains information on limitations regarding product use andfunction and information on the limitations as to liability of the manufacturer.INSTALLATIONMANUAL
FCC COMPLIANCE STATEMENTCAUTION: Changes or modifications not expressly approved by DigitalSecurity Controls could void your authority to use this equipment. Thisequipment generates and uses radio frequency energy and if not installedand used properly, in strict accordance with the manufacturer's instructions,may cause interference to radio and television reception. It has been typetested and found to comply with the limits for Class B device in accordancewith the specifications in Subpart "B" of Part 15 of FCC Rules, which aredesigned to provide reasonable protection against such interference in anyresidential installation. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause interferenceto television or radio reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interferenceby one or more of the following measures:• Re-orient the receiving antenna• Relocate the alarm control with respect to the receiver• Move the alarm control away from the receiver• Connect the alarm control into a different outlet so that alarm control andreceiver are on different circuits.If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find thefollowing booklet prepared by the FCC helpful: "How to Identify and ResolveRadio/Television Interference Problems". This booklet is available from theU.S. Government Printing Office, Washington, D.C. 20402, Stock # 004-000-00345-4.IMPORTANT INFORMATIONThis equipment complies with Part 68 of the FCC Rules. On the side of thisequipment is a label that contains, among other information, the FCCregistration number and ringer equivalence number (REN) for this equipment.If requested, this number must be provided to the Telephone Company.GS3060 Product Identifier US: F53AL00BGS3060REN: 0.0BUSOC Jack: RJ-31XTelephone Connection RequirementsA plug and jack used to connect this equipment to the premises wiring andtelephone network must comply with the applicable FCC Part 68 rules andrequirements adopted by the ACTA. A compliant telephone cord and modularplug is provided with this product. It is designed to be connected to a compatiblemodular jack that is also compliant. See installation instructions for details.Ringer Equivalence Number (REN)The REN is used to determine the number of devices that may be connected toa telephone line. Excessive RENs on a telephone line may result in the devicesnot ringing in response to an incoming call.In most but not all areas, the sum of RENs should not exceed five (5.0). To becertain of the number of devices that may be connected to a line, as determinedby the total RENs, contact the local Telephone Company. For products approvedafter July 23, 2001, the REN for this product is part of the product identifierthat has the format. US: AAAEQ##TXXXX. The digits represented by ## arethe REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products,the REN is separately shown on the label.Incidence of HarmIf this equipment GS3060 causes harm to the telephone network, thetelephone company will notify you in advance that temporary discontinuanceof service may be required. But if advance notice is not practical, theTelephone Company will notify the customer as soon as possible. Also, youwill be advised of your right to file a complaint with the FCC if you believeit is necessary.Changes in Telephone Company Equipment or FacilitiesThe Telephone Company may make changes in its facilities, equipment,operations or procedures that could affect the operation of the equipment. Ifthis happens the Telephone Company will provide advance notice in orderfor you to make necessary modifications to maintain uninterrupted service.Equipment Maintenance FacilityIf trouble is experienced with this equipment for repair or warrantyinformation, please contact the facility indicated below. If the equipment iscausing harm to the telephone network, the Telephone Company may requestthat you disconnect the equipment until the problem is solved. This equipmentis of a type that is not intended to be repaired by the end user.DSC c/o APL Logistics, 757 Douglas Hill Rd., Lithia Springs, GA 30122Additional InformationConnection to party line service is subject to state tariffs. Contact the statepublic utility commission, public service commission or corporationcommission for information.Alarm dialling equipment must be able to seize the telephone line and placea call in an emergency situation. It must be able to do this even if otherequipment (telephone, answering system, computer modem, etc.) alreadyhas the telephone line in use. To do so, alarm dialling equipment must beconnected to a properly installed RJ-31X jack that is electrically in serieswith and ahead of all other equipment attached to the same telephone line.Proper installation is depicted in the figure below. If you have any questionsconcerning these instructions, you should consult your telephone companyor a qualified installer about installing the RJ-31X jack and alarm diallingequipment for you.TelephoneComputerTelephoneTelephoneFax MachineAlarm DialingEquipmentRJ-31XJack UnusedRJ-11 JackTelephoneLineNetworkServiceProvider'sFacilitiesCustomer Premises Equipment and WiringUnusedRJ-11 JackNetworkDemarcationPoint AnsweringSystemIndustry Canada Compliance StatementThis Equipment meets the applicable Industry Canada Terminal EquipmentTechnical Specifications. This is confirmed by the registration number. Theabbreviation, IC, before the registration number signifies that registrationwas performed based on a Declaration of Conformity indicating that IndustryCanada technical specifications were met. It does not imply that that IndustryCanada approved the equipment. The Ringer Equivalence Number (REN)for this terminal equipment is 0.0. The REN assigned to each terminalequipment provides an indication of the maximum number of terminalsallowed to be connected to a telephone interface. The termination on aninterface may consist of any combination of devices subject only to therequirement that the sum of the Ringer Equivalence Numbers of all devicesdoes not exceed 5.Cet équipement est conforme aux spécifications techniques applicables auxéquipements terminaux d'Industrie Canada. Ceci est confirmé par le numérod'enregistrement. L'abréviation IC précédant le numéro d'enregistrementsignifie que l'enregistrement a été effectué sur la base de la Déclaration deconformité indiquant que le produit est conforme aux spécificationstechniques d'Industrie Canada. Ceci n'implique pas que le produit ait étéapprouvé par Industrie Canada.Le nombre équivalent de sonneries (REN) de cet appareil terminal est 0.0. LeREN attribué à chaque équipement terminal fournit une indication sur le nombremaximum de terminaux pouvant être connectés sur une interface téléphonique.La terminaison sur une interface peut constituer en n'importe quelle combinaisond'appareils, à la condition seulement que la somme des Nombres équivalents desonneries de tous les appareils ne soit pas supérieure à 5.This Class B digital apparatus meets all requirements of the Canadianinterference-causing equipment regulations. Cet appareil numérique de laClasse B respecte toutes les exigences de règlement sur le matériel brouilleurdu Canada.The term “IC:” before the radio certification number only signifies thatIndustry Canada technical specifications were met.WARNING: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of20cm or more must be maintained between the antenna of this device and persons during device operation.
Download:
Mirror Download [FCC.gov]
Document ID821144
Application IDTZVMI6+haP5DphdawoAV2Q==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize25.06kB (313209 bits)
Date Submitted2007-07-26 00:00:00
Date Available2007-07-26 00:00:00
Creation Date2007-06-14 13:14:00
Producing SoftwareAcrobat Distiller 8.0.0 (Windows)
Document Lastmod2007-06-14 13:30:07
Document TitleDraft1_29007442R001_GS3060_V3-0_IM_EN.P65
Document CreatorPageMaker 6.5
Document Author: pdefina
FCC ID Filing: F5307GS3060

Navigation menu