Tyco Safety Canada 17WS9TCHW IoTega Touch Screen with Wi-Fi 802.b/g/n User Manual My

Download:
Mirror Download [FCC.gov]
Document ID	3512546
Application ID	nOfqfQFjnBYoilyCaf/n5g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	333.37kB (4167087 bits)
Date Submitted	2017-08-15 00:00:00
Date Available	2017-08-15 00:00:00
Creation Date	2017-08-01 09:36:59
Producing Software	madbuild
Document Lastmod	2017-08-02 11:39:20
Document Title	My Document
Document Creator	Adobe Illustrator CS2
Document Author:	snolan

WS9TCHW Ver 1.0 Touchscreen Installation
Introduction
Refer to the iotega Reference Manual for information regarding the limitations of product use and function and manufacturer's
liability. Use these instructions with the iotega Reference Manual. The WS9TCHW touchscreen is compatible and intended for use
with the iotega Wireless Security System.
Mounting the hardware
Step 1
Step 2
Step 3
Step 4
Install the wire through the wall for
mounting.
Attach the mounting plate to the wall with the
mounting hardware. If mounting on drywall, mark
the four installation points, remove the mounting
plate, and install the drywall inserts.
Connect the USB cable.
Insert the left side of the touchscreen into the mounting bracket at
a slight angle.
Step 6
Step 7
Remove the breakable tab and place the flush
wire wall mount through the channel.
To remove the touchscreen insert a flat
head screwdriver into one of the rear
slots at a downward angle and push up
to release the touchscreen.
Step 5
Push the right side of the touchscreen into the mounting bracket.
Enrolling the touchscreen
Step 1
Power up the touchscreen.
During power up the following events
occur:
The touchscreen keypad
flashes.
The Power and Link Speed
LEDs illuminate.
The Link Activity LED
flashes.
The Remote Connection LED
stays on when ready.
Step 2
Step 3
Step 4
If it is not enrolled, the serial number and enroll
button appears.
On the Install App go to Enroll devices.
Enter the touchscreen serial number
and tap Enroll.
Intended use
Locks
Thermostat
Garage Door
Each lock has a Lock/unlock control
icon. When you enroll multiple locks,
you can lock or unlock them simultaneously.
View or change the temperature and
activate predefined schedules or
Each garage door has an Open/Close control icon.
When you enroll multiple garage doors, you can
open or close them simultaneously.
Video
Weather
Banner Messages
The video menu shows the cameras
on the system. You can view videos
from a particular camera and use the
camera options to rotate or angle
the image.
Tap the weather icon to bring up a
weekly weather forecast menu and
the high and low temperatures for
each day.
When the system receives a high
priority message, a banner appears
and overrides the screensaver. For
low priority messages, an icon
appears. Tap the icon to see a list of
available messages.
Lighting Control
Each light has an On/Off control icon
and a dimmer slider, if supported.
When you enroll multiple lights, you
can turn them on or off
scenes.
simultaneously .
Environmental requirements
Operating Temperature
The unit operates normally in a temperature range of -10 °C to 55 °C.
Humidity
Installation Type
RoHS
The unit operates with a 5% to 93%
Indoor, non-hazardous locations. This
module is to be installed by service
persons only.
This product is RoHS compliant.
RH non-condensing .
Tablet Specifications
Screen
Type : Capacitive Touch
Dot (Pixel) Shape : Square
Brightness: 400 Nit (Typ.) at 25 C
Multi-touch: N/A
Size: 7" diagonal
Response Time (Tr/Tf): 10/15 ms
(Typ.)
Backlight Colour: White Colour
Ambient Light Sensor: N/A
Contrast Ratio: 400:1
Sunlight readable: N/A
Viewing Angle: Right: 60, Left: 60,
Up: 60, Down: 60 degrees
Colours: 256/65 k
Screen dimensions: 155 x 85 mm
(approx)
Resolution (min): 800 x 480 pixels
(min)
OS
Android V4.4 or greater
Electrical specifications
Primary power source
Ratings:
Standby Battery
Plug in adapter M/N: SEI0502000V
Helms-Man Transformers
Company limited
Input: 100 - 240 V~ 50 - 60 Hz 500 mA
4 hour (min) standby, rechargeable
Output : 5 V - 2000 mA
Intended application
100% up time expected
External power control
Energy Efficiency level 6
Note: USB port only for power supply and battery charging, it cannot connect to PC for communication.
N/A (power cycle button)
Memory specifications
Storage
4 GB minimum
Memory (DDR3)
512 MB
SD card port
microSD card
USB
2.0, microUSB connection
USB cable length 10 ft / 350 cm
Unit specifications
Unit
Peripherals
Size: 190 x 110 x 11 mm (approx)
Camera : 3 megapixels; (minimum)
Housing Colour : Glossy black
Screen side placement (front facing)
Operating Temp: 0 °C to 50 °C
Auto focus, Flash (N/A)
Storage Temp: -30 °C to 90 °C
Microphone: Yes
Operating Humidity: 5 to 93% RH,
non-condensing
Audio input (connection): N/A
Mounting
Wall mountable : When mounted, the
bracket should not be visible
Other specifications
Safety Instructions
For safety instructions please refer
to the Installation Manual for the
panel.
SAR Data
SAR test distance is 5 mm. Max SAR is
Frequency Range
2412 MHz to 2462 MHz for US
2412 MHz to 2472 MHz for EU
RF Output Power
16 dBm maximum
FCC and ISED COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Caution: Changes or modifications not expressly approved by Digital Security Controls could void your authority to use this equipment.
This equipment generates and uses radio frequency energy and if not installed and used properly, in strict accordance with the manufacturer’sinstructions,may
cause interference to radio and television reception. It has been type tested and found to comply with the limits for Class B device in accordance with the specifications in Subpart“ B” of Part15 of FCC Rules, which are designed to provide reasonable protection against such interference in any residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to television or radio
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (i) Re- orient the receiving antenna;(ii) increase the separation between the equipment and receiver;(iii) connect the equipment into an outlet on a circuit different from that to which the receiver is connected. If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions. The user may find the following booklet prepared by the FCC helpful:“How to Identify and Resolve Radio/ Television
Interference Problems”. This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402, Stock# 004-000-00345-4. This Class B
digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. IC:160A- WS9TCHW.
The term IC before the radio certification number signifies that the Industry Canada technical specifications were met.
Caution: Do not dispose of the waste battery as unsorted municipal waste. Consult your local rules and/or laws regarding recycling of this battery.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Tyco Safety Products Canada Ltd declares that the radio equipment type Wireless Keypad for Iotega Alarm System is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the following Internet address:
http://dsc.com/pdf/1707010
Frequency Bands and Maximum Power level
2400 MHz - 2483.5 MHz: 100 mW
European Single Point of Contact: Tyco Safety Products, Voltaweg 20, 6101 XK Echt, Netherlands
Industry Canada Statement
The device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference that may cause undesired operation of the device.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Leprésent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio.
Exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est
susceptible d'en compromettre le fonctionnement."
Caution
Risk of explosion if battery is replaced
by an incorrect type.
Dispose of used batteries according
to the instructions.
The device is designed and manufactured not to excede the emission
limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the United States.
During SAR testing, the device is set to transmit at its highest certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR level
of the device while operating can be well below the maximum value.
This is because the device is designed to operate at multiple power
levels so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station antenna, the
lower the power output.
The exposure standard for wireless employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by
the FCC is 1.6 W/kg.
Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest power
level in all tested frequency bands.
The FCC has granted an Equipment Authorization for this model
device with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. SAR information on this model device
is on file with the FCC and can be found under the Display Grant section of www.fcc.goc/oet/ea/fccid, after searching on FCC ID:
F5317WS9TCHW.
For this device, the highest reported SAR value for near the body is
0.52W/kg RF exposure in simulated usage near the body with 5 mm
separation.
© 2017 Tyco Security Products. All Rights Reserved. www.dsc.com
29009968R001

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1.1-111
Modify Date                     : 2017:08:02 11:39:20+08:00
Create Date                     : 2017:08:01 09:36:59+01:00
Metadata Date                   : 2017:08:02 11:39:20+08:00
Creator Tool                    : Adobe Illustrator CS2
Thumbnail Width                 : 200
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 18289 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : My Document
Creator                         : snolan
Document ID                     : uuid:f8bbafad-0bc6-4f4c-a633-ffd0060c2cfe
Instance ID                     : uuid:fe55ca3a-efb0-488b-a375-5942155f096f
Producer                        : madbuild
Has XFA                         : No
Page Count                      : 4
Container Version               : 12
Creator Version                 : 12
For                             : temp, wongs
Bounding Box                    : 0 0 612 792
Author                          : snolan
Image Height                    : 792
Image Width                     : 612
Image Size                      : 612x792
Megapixels                      : 0.485

EXIF Metadata provided by EXIF.tools