Tyco F3200 Users Manual LT0122 Fire Indicator Panel Installation & Programming

2015-02-03

• INTRODUCTION
  • SCOPE
  • ASSOCIATED DOCUMENTATION
    • PRODUCT
    • STANDARDS
  • PRODUCT HISTORY LOG
    • HARDWARE
    • SOFTWARE
  • GLOSSARY OF ABBREVIATIONS
  • GLOSSARY OF TERMINOLOGY
• SYSTEM DESCRIPTION
  • OVERVIEW
    • GENERAL
    • DETECTOR CIRCUITS
    • DISPLAYS
    • OUTPUTS
    • POWER SUPPLY
    • REMOTE DISPLAY & PRINTER
    • NETWORKING
  • PHYSICAL STRUCTURE
  • SYSTEM STRUCTURE
    • PCB MODULES
    • INTER-CONNECTION & STRUCTURE
• SYSTEM SPECIFICATIONS
  • GENERAL
    • FIP PART NUMBER & DESCRIPTION
    • SYSTEM EXPANSION
    • ENVIRONMENTAL
  • MECHANICAL SPECIFICATIONS
  • ELECTRICAL SPECIFICATIONS
    • MAINS SUPPLY
    • BATTERY CHARGER & PSU
    • BATTERY
    • FUSES
    • CURRENT CONSUMPTION
      • F3200 Quiescent & Alarm Currents
      • NDU Quiescent and Alarm Currents
  • INPUT SPECIFICATIONS
    • AZC SPECIFICATIONS
    • MAF/PSU INPUTS
    • CONTROLLER/DISPLAY INPUTS
    • 8 RELAY MODULE SUPERVISION
    • NZ MODE DISPLAY EXTENDER BOARD INPUTS
  • OUTPUT SPECIFICATIONS
    • 8 ZONE MODULE OUTPUTS
    • 8 RELAY MODULE OUTPUTS
    • MAF/PSU OUTPUTS
    • CONTROLLER/DISPLAY OUTPUTS
    • RS485 BOARD
    • NZ DISPLAY EXTENDER BOARD OUTPUTS
  • CONTROLS
  • DISPLAYS
• ORDERING INFORMATION
  • ORDERING INFORMATION
• CONFIGURING A FIP
  • GENERAL
  • MODULE CONFIGURATION
  • BATTERY & POWER SUPPLY
    • GENERAL
    • BATTERY/CHARGER CALCULATIONS
    • EXAMPLE BATTERY/CHARGER CALCULATIONS
    • BATTERY SIZE
    • BATTERY TEST RESISTORS
    • BATTERY OVERCURRENT PROTECTION
    • POWERING AN F3200 FROM AN EXTERNAL DC SUPPLY
  • LINKS ON PCB MODULES
    • CONTROLLER/DISPLAY
    • MAF/PSU
    • 8 RELAY MODULE
    • 16 ZONE LED DISPLAY
  • ERROR MESSAGES DURING FIP CONFIGURATION
• PROGRAMMING
  • INTRODUCTION
    • GENERAL
    • MENU STRUCTURE & PARAMETER ENTRY
    • PROGRAMMING KEYS
    • RECOMMENDED PROCEDURE FOR CONFIGURATION & PROGRAMMING
    • RECOMMENDED PROCEDURE FOR CONFIGURATION & PROGRAMMING (CONTINUED)
  • SET MENU & OPERATOR PROGRAMMING FUNCTIONS
    • GENERAL
    • VIEW DATA PARAMETERS
  • INITIALISING, ACCESSING, DE-ACCESSING, PRINTING, SAVING, LOADING & VERIFYING THE DATABASE
    • INITIALISING THE DATABASE
    • ACCESSING THE DATABASE
    • DE-ACCESSING THE DATABASE
    • PRINTING & SAVING THE DATABASE
    • RESTORING THE DATABASE FROM A COMPUTER
    • DATABASE CONVERSION
    • VERIFYING A SAVED DATABASE
  • PROGRAM DATA MENU, TEXT & GLOBAL PARAMETERS
    • GENERAL
    • ACCESS CODES
    • TEXT ENTRY
      • PROGRAMMING TEXT WITH THE KEYPAD
      • TEXT PROGRAMMING WITH A PC
    • GLOBAL DATA
• PROGRAMMING SYSTEM CONFIGURATION
  • SYSTEM CONFIGURATION MENU
  • CONFIGURING CIRCUITS (AZCS)
    • GENERAL
    • ALARM TEXT
    • MODE
    • TIME DELAYS
    • VOLTAGE BANDS
  • CONFIGURING ZONES
    • GENERAL
    • MAPPING TO MAF
    • MAPPING ZONES TO LEDS
  • PROGRAMMING OUTPUTS
    • GENERAL
    • GENERAL (CONT’D)
    • LOGIC OPERATORS
    • LOGIC OPERANDS
      • Operands Type 1
      • Operands Type 2
    • EXAMPLES OF LOGIC EQUATIONS
    • ENTERING EQUATIONS
    • THE OUTPUT LOGIC PROGRAMMING MENUS
    • PROGRAMMING RELAYS
    • CONTROLLING ZONE LEDS
    • PROGRAMMING ZONE ISOLATE/DE-ISOLATE/RESET COMMANDS
      • ENTERING OUTPUT LOGIC ZONE COMMANDS
      • OPERATION OF OUTPUT LOGIC ZONE COMMANDS
      • EXAMPLE EQUATIONS
    • USING THE ZND AND ZNM TOKENS
  • RELAY SUPERVISION
    • GENERAL
    • BELLS & ANCILLARY RELAY SUPERVISION
    • MODULE RELAY SUPERVISION
  • RDU
• INSTALLATION & WIRING
  • INSTALLATION
    • CABINET INSTALLATION
    • CARDFRAME INSTALLATION
    • MODULE INSTALLATION
    • LED DISPLAY INSTALLATION
    • ZONE LABELLING
  • FIELD WIRING
    • GENERAL
    • MAINS WIRING
  • AZC WIRING
  • MAF ANCILLARY RELAY WIRING
  • WARNING SYSTEM WIRING
  • MODULE RELAY WIRING
    • DUAL POLE – POLARITY REVERSAL OUTPUT
  • OPEN COLLECTOR WIRING
    • LED MIMIC DISPLAYS
    • INTERFACING TO OTHER EQUIPMENT
  • ASE INSTALLATION AND WIRING
  • RDU WIRING
  • SLIMLINE NDU (FP0714) WIRING
  • INSTALLATION OF 19" NDU (FP0733)
• APPLICATIONS
  • AS1668 AIR CONDITIONING CONTROL
    • GENERAL
    • CIRCUITS & ZONES
    • RELAYS
    • LEDS
    • AS1668 CONTROL MODULE & DRAWINGS
  • GAS FLOOD
    • GENERAL
    • LOGIC & CONFIGURATION
    • NOTES
    • USE OF ACTUATORS
    • AVI SIGNS
    • DRAWINGS
  • SUB FIP MONITORING
    • GENERAL
    • CONNECTION
  • FIRE DETECTION IN HAZARDOUS AREAS (EXPLOSIVE ATMOSPHERES)
    • REFERENCES
    • GENERAL
    • INTRINSICALLY SAFE DETECTION
      • ISOLATED REPEATERS
      • 6 TERMINAL ISOLATED REPEATER
      • 4 TERMINAL ISOLATED REPEATER WITH ZONE ADAPTOR UNIT ZAU401
      • 4 TERMINAL ISOLATED REPEATER ALONE
  • USE OF NORMALLY CLOSED CONTACTS
  • SPECIAL CONNECTIONS TO DETECTORS
    • CONNECTING THE S231I+ OR S231F+ (USING ZAU401 REV 2)
• ALIGNMENT, ADJUSTMENT &PLACING INTO OPERATION
  • ALIGNMENT & ADJUSTMENT
  • PLACING INTO OPERATION
    • GENERAL
    • POWER UP
    • COMMISSIONING CHECKLIST
• NETWORK PROGRAMMING
  • INTRODUCTION
    • PANEL˚LINK NETWORK
    • NETWORK APPLICATION OVERVIEW
  • PROGRAMMING METHODS
    • DATA FILTERS - THE SID LIST & GROUPS LIST
    • NETWORK MAF STATUS
    • PROGRAMMING METHODOLOGY
  • NETWORK CONFIGURATION MENU
    • NETPG1 OPTIONS
    • NETPG2 OPTIONS
    • NETPG3 OPTIONS
    • NETPG4 OPTIONS
    • NETPG5 OPTIONS
  • SID CONFIGURATION
    • SID MENU ONE
    • SID MENU TWO
  • NETWORK MAF CONFIGURATION
    • OPTIONS UNDER NETMAF1
    • OPTIONS UNDER NETMAF2
    • OPTIONS UNDER NETMAF3
  • NET COMMANDS
  • NET FFCIF CONFIGURATION
  • NETWORK EVENT CONFIGURATION
  • NETWORK LOGIC VARIABLES
  • NET STATUS REFRESH
  • NDU OPERATION
  • DEFAULT VALUES FOR PANEL-LINK VARIABLES
• NEW ZEALAND OPERATION
  • GENERAL
  • NZ DISPLAY EXTENDER BOARD
  • MANUAL CALLPOINT (MCP)
  • PROGRAMMABLE OPTIONS
  • LOGIC TOKENS
  • SYSTEM STATES & INDICATIONS
  • NETWORK PARAMETER PROGRAMMING
    • THE SID LIST
    • NETWORK MAF CONFIGURATION
    • NETWORK FFCIF CONFIGURATION
  • INSTALLATION : NZ DISPLAY EXTENDER BOARD & BRIGADE DISPLAYS
    • GENERAL
    • MIMIC DISPLAY
    • ACTIVE DISPLAY
    • DISPLAY EXTENDER BOARD MISCELLANEOUS TERMINATION
• TANDEM LCD MODE
  • TANDEM LCD MODE